diff options
Diffstat (limited to 'keyboard/infinity/tool/README')
| -rw-r--r-- | keyboard/infinity/tool/README | 103 |
1 files changed, 0 insertions, 103 deletions
diff --git a/keyboard/infinity/tool/README b/keyboard/infinity/tool/README deleted file mode 100644 index 698314e250..0000000000 --- a/keyboard/infinity/tool/README +++ /dev/null @@ -1,103 +0,0 @@ -OpenOCD config files for Kinetis -================================ -http://nemuisan.blog.bai.ne.jp/?eid=192848#OPENOCD - -These are needed for debug and programing bootloader with SWD. To flash keyboard firmware use 'dfu-util'. - -Flash security of Freescale kinetis ------------------------------------ -If FSEC of flash config is changed accidentally SWD/JTAG you can't get debug access until doing 'mdm mass_erase' with JTAG, CMSIS-DAP or OpenSAD adapter. HLA(high level adapter) like stlink doesn't work for this. - - -Example -------- -Debug: - $ openocd -s tool -f tool/openocd.cfg - $ arm-none-eabi-gdb build/infinity.elf -ex "target remote localhost:3333" - -Flash bootloader: - $ openocd -s tool -f tool/openocd.cfg -c "mt_flash kiibohd_bootloader.bin" - - -Infinity SWD pinout -------------------- -SWD pins are placed next to reset button; SWD_CLK, SWD_DIO, GND, 5V from top. -Note that RESET is also needed to get full control with OpenOCD. - - -------- - | ___ o |CLK - ||RST| o |DIO - ||BTN| o |GND - | --- o |5V - -------- - - -Kinetis sercure state ----------------------- -openocd 0.9.0 - -Warn : *********** ATTENTION! ATTENTION! ATTENTION! ATTENTION! ********** -Warn : **** **** -Warn : **** Your Kinetis MCU is in secured state, which means that, **** -Warn : **** with exception for very basic communication, JTAG/SWD **** -Warn : **** interface will NOT work. In order to restore its **** -Warn : **** functionality please issue 'kinetis mdm mass_erase' **** -Warn : **** command, power cycle the MCU and restart OpenOCD. **** -Warn : **** **** -Warn : *********** ATTENTION! ATTENTION! ATTENTION! ATTENTION! ********** - - -Info : MDM: Chip is unsecured. Continuing. -target state: halted -target halted due to debug-request, current mode: Thread -xPSR: 0x01000000 pc: 0xfffffffe msp: 0xfffffffc -auto erase enabled -Info : Probing flash info for bank 0 -Warn : flash configuration field erased, please reset the device -wrote 4096 bytes from file kiibohd_bootloader.bin in 2.442562s (1.638 KiB/s) -Info : MDM: Chip is unsecured. Continuing. - - - - -Open On-Chip Debugger 0.9.0-dev-00346-g3e1dfdc-dirty (2015-03-21-20:41) -Licensed under GNU GPL v2 -For bug reports, read - http://openocd.sourceforge.net/doc/doxygen/bugs.html -Info : only one transport option; autoselect 'cmsis-dap' -Kinetis MUST need Hardware SRST Control to Recover Secure-State! -adapter_nsrst_delay: 200 -srst_only separate srst_gates_jtag srst_open_drain connect_deassert_srst -Info : add flash_bank kinetis k20.pflash -cortex_m reset_config sysresetreq -adapter speed: 1000 kHz -srst_only separate srst_nogate srst_open_drain connect_assert_srst -Info : CMSIS-DAP: SWD Supported -Info : CMSIS-DAP: Interface Initialised (SWD) -Info : CMSIS-DAP: FW Version = 1.0 -Info : SWCLK/TCK = 0 SWDIO/TMS = 1 TDI = 0 TDO = 0 nTRST = 0 nRESET = 1 -Info : Connecting under reset -Info : DAP_SWJ Sequence (reset: 50+ '1' followed by 0) -Info : CMSIS-DAP: Interface ready -Info : clock speed 1000 kHz -Info : IDCODE 0x2ba01477 -Warn : Adapter returned success despite SSTICKYERR being set. -Warn : Adapter returned success despite SSTICKYERR being set. -Warn : Adapter returned success despite SSTICKYERR being set. -Warn : Adapter returned success despite SSTICKYERR being set. -Info : k20.cpu: hardware has 6 breakpoints, 4 watchpoints -Info : MDM: Chip is unsecured. Continuing. -Info : MDM: Chip is unsecured. Continuing. -target state: halted -target halted due to debug-request, current mode: Thread -xPSR: 0x01000000 pc: 0xfffffffe msp: 0xfffffffc -auto erase enabled -Info : Probing flash info for bank 0 -Warn : flash configuration field erased, please reset the device -wrote 4096 bytes from file kiibohd_bootloader.bin in 2.446902s (1.635 KiB/s) -Info : MDM: Chip is unsecured. Continuing. -Info : Halt timed out, wake up GDB. -Error: timed out while waiting for target halted -Runtime Error: tool/k20dx32_flash.cfg:81: -in procedure 'mt_flash' -in procedure 'halt' called at file "tool/k20dx32_flash.cfg", line 81 |