diff options
Diffstat (limited to 'keyboard/ergodox')
| -rw-r--r-- | keyboard/ergodox/Makefile | 139 | ||||
| -rw-r--r-- | keyboard/ergodox/README.md | 56 | ||||
| -rw-r--r-- | keyboard/ergodox/backlight.c | 61 | ||||
| -rw-r--r-- | keyboard/ergodox/config.h | 88 | ||||
| -rw-r--r-- | keyboard/ergodox/ergodox.c | 123 | ||||
| -rw-r--r-- | keyboard/ergodox/ergodox.h | 145 | ||||
| -rw-r--r-- | keyboard/ergodox/i2cmaster.h | 178 | ||||
| -rw-r--r-- | keyboard/ergodox/keymaps/keymap_cub.c | 595 | ||||
| -rw-r--r-- | keyboard/ergodox/keymaps/keymap_default.c | 130 | ||||
| -rw-r--r-- | keyboard/ergodox/keymaps/keymap_ergodox_ez.c | 210 | ||||
| -rw-r--r-- | keyboard/ergodox/keymaps/keymap_passwords_example.h | 23 | ||||
| -rw-r--r-- | keyboard/ergodox/keymaps/keymap_simon.c | 624 | ||||
| -rw-r--r-- | keyboard/ergodox/keymaps/keymap_simon_passwords.example.h | 2 | ||||
| -rw-r--r-- | keyboard/ergodox/matrix.c | 405 | ||||
| -rw-r--r-- | keyboard/ergodox/twimaster.c | 208 |
15 files changed, 0 insertions, 2987 deletions
diff --git a/keyboard/ergodox/Makefile b/keyboard/ergodox/Makefile deleted file mode 100644 index f71d096783..0000000000 --- a/keyboard/ergodox/Makefile +++ /dev/null @@ -1,139 +0,0 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - -# Target file name (without extension). -TARGET = ergodox - - -# Directory common source filess exist -TOP_DIR = ../.. - -# Directory keyboard dependent files exist -TARGET_DIR = . - -# # project specific files -SRC = ergodox.c \ - twimaster.c \ - backlight.c - -ifdef KEYMAP - SRC := keymaps/keymap_$(KEYMAP).c $(SRC) -else - SRC := keymaps/keymap_default.c $(SRC) -endif - -CONFIG_H = config.h - -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -# NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -# MIDI_ENABLE = YES # MIDI controls -# UNICODE_ENABLE = YES # Unicode -# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID - - -# Optimize size but this may cause error "relocation truncated to fit" -#EXTRALDFLAGS = -Wl,--relax - -# Search Path -VPATH += $(TARGET_DIR) -VPATH += $(TOP_DIR) - -include $(TOP_DIR)/quantum.mk - diff --git a/keyboard/ergodox/README.md b/keyboard/ergodox/README.md deleted file mode 100644 index bbbc73515b..0000000000 --- a/keyboard/ergodox/README.md +++ /dev/null @@ -1,56 +0,0 @@ -# TMK Generic - -* I'm not sure what the Magic + H does. - Is this a menu that will pop up regardless of what platform and program is open? - - Yes, this is sort of debugging. - Use PJRC's [hid_listen](https://www.pjrc.com/teensy/hid_listen.html) to see debug messages. - -# TMK/Ergodox specific - -* I would like to configure my leds to indicate the active layer. - I read that can be done, but I haven't seen an example for this firmware. - Can someone please post an example or a link? - - TMK for Ergodox have support for seven (!) led's: - - three on right - - three on left (see http://geekhack.org/index.php?topic=22780.msg873819#msg873819 for more details) - - Teensy onboard led as well - - Any of these leds can be used as layer indicator or NumLock/CapsLock/ScrollLock led. - - [Here is example](https://github.com/cub-uanic/tmk_keyboard/blob/cub_layout/keyboard/ergodox/matrix.c#L121-167) - how you can assign some meaning to each led. - In this code only left leds are used to show layers, but you can - [change `led_set()`](https://github.com/cub-uanic/tmk_keyboard/blob/cub_layout/keyboard/ergodox/led.c) - and do anything you want with all leds. - -# Firmware - -Q: Where to get binaries? -A: - -Q: Where to get sources? -A: - -Q: How to compile? -A: - - -# Layouts - -description of layouts in base firmware binaries - - -# Things TO-DO - -- [ ] Flash NumLock led only when "numpad" layer is active -- [ ] Command (in terms of IS_COMMAND) to switch to no-leds mode -- [ ] Increase count of ACTION keys -- [ ] Fix command_state() onboard led: it should flash only when kbd in some specific mode (CONSOLE || MOUSE) -- [ ] ergodox_blink_all_leds() should save current state of leds, and restore after blink. initial state of all leds == off -- [ ] add support for pseudo-backlight (reversed LEDs) + docs/photo -- [ ] command to debug all LEDs (on/off/blink) -- [ ] proper (in-core) implementation of DEBUG_MATRIX_SCAN_RATE (non-Ergodox specific) -- [ ] proper (in-core) support for per-layer fn_actions[] - diff --git a/keyboard/ergodox/backlight.c b/keyboard/ergodox/backlight.c deleted file mode 100644 index f69364b2af..0000000000 --- a/keyboard/ergodox/backlight.c +++ /dev/null @@ -1,61 +0,0 @@ - -#include <avr/io.h> -#include "backlight.h" - -#define CHANNEL OCR1C - -void backlight_init_ports() -{ - - // Setup PB7 as output and output low. - DDRB |= (1<<7); - PORTB &= ~(1<<7); - - // Use full 16-bit resolution. - ICR1 = 0xFFFF; - - // I could write a wall of text here to explain... but TL;DW - // Go read the ATmega32u4 datasheet. - // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on - - // Pin PB7 = OCR1C (Timer 1, Channel C) - // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0 - // (i.e. start high, go low when counter matches.) - // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0 - // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1 - - TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010; - TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001; - - backlight_init(); -} - -void backlight_set(uint8_t level) -{ - if ( level == 0 ) - { - // Turn off PWM control on PB7, revert to output low. - TCCR1A &= ~(_BV(COM1C1)); - CHANNEL = 0x0; - // Prevent backlight blink on lowest level - PORTB &= ~(_BV(PORTB7)); - } - else if ( level == BACKLIGHT_LEVELS ) - { - // Prevent backlight blink on lowest level - PORTB &= ~(_BV(PORTB7)); - // Turn on PWM control of PB7 - TCCR1A |= _BV(COM1C1); - // Set the brightness - CHANNEL = 0xFFFF; - } - else - { - // Prevent backlight blink on lowest level - PORTB &= ~(_BV(PORTB7)); - // Turn on PWM control of PB7 - TCCR1A |= _BV(COM1C1); - // Set the brightness - CHANNEL = 0xFFFF >> ((BACKLIGHT_LEVELS - level) * ((BACKLIGHT_LEVELS + 1) / 2)); - } -}
\ No newline at end of file diff --git a/keyboard/ergodox/config.h b/keyboard/ergodox/config.h deleted file mode 100644 index c8eaae6146..0000000000 --- a/keyboard/ergodox/config.h +++ /dev/null @@ -1,88 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x1307 -#define DEVICE_VER 0x0001 -#define MANUFACTURER ErgoDox EZ -#define PRODUCT ErgoDox EZ -#define DESCRIPTION t.m.k. keyboard firmware for Ergodox - -/* key matrix size */ -#define MATRIX_ROWS 14 -#define MATRIX_COLS 6 - -#define MOUSEKEY_DELAY 100 -#define MOUSEKEY_INTERVAL 20 -#define MOUSEKEY_MAX_SPEED 3 -#define MOUSEKEY_TIME_TO_MAX 10 - -#define COLS (int []){ F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 } -#define ROWS (int []){ D0, D5, B5, B6 } - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -#define BACKLIGHT_LEVELS 3 - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 2 -#define TAPPING_TERM 230 -#define TAPPING_TOGGLE 2 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \ - keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \ -) - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -// #define NO_DEBUG - -/* disable print */ -// #define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION -//#define DEBUG_MATRIX_SCAN_RATE - -#endif diff --git a/keyboard/ergodox/ergodox.c b/keyboard/ergodox/ergodox.c deleted file mode 100644 index 950e6a66ca..0000000000 --- a/keyboard/ergodox/ergodox.c +++ /dev/null @@ -1,123 +0,0 @@ -#include "ergodox.h" -#include "i2cmaster.h" - -bool i2c_initialized = 0; -uint8_t mcp23018_status = 0x20; - -bool ergodox_left_led_1 = 0; // left top -bool ergodox_left_led_2 = 0; // left middle -bool ergodox_left_led_3 = 0; // left bottom - -__attribute__ ((weak)) -void * matrix_init_user(void) { - -}; - -__attribute__ ((weak)) -void * matrix_scan_user(void) { - -}; - -void * matrix_init_kb(void) { - // keyboard LEDs (see "PWM on ports OC1(A|B|C)" in "teensy-2-0.md") - TCCR1A = 0b10101001; // set and configure fast PWM - TCCR1B = 0b00001001; // set and configure fast PWM - - // (tied to Vcc for hardware convenience) - DDRB &= ~(1<<4); // set B(4) as input - PORTB &= ~(1<<4); // set B(4) internal pull-up disabled - - // unused pins - C7, D4, D5, D7, E6 - // set as input with internal pull-ip enabled - DDRC &= ~(1<<7); - DDRD &= ~(1<<7 | 1<<5 | 1<<4); - DDRE &= ~(1<<6); - PORTC |= (1<<7); - PORTD |= (1<<7 | 1<<5 | 1<<4); - PORTE |= (1<<6); - - ergodox_blink_all_leds(); - - if (matrix_init_user) { - (*matrix_init_user)(); - } -}; - -void * matrix_scan_kb(void) { - - if (matrix_scan_user) { - (*matrix_scan_user)(); - } -}; - - -void ergodox_blink_all_leds(void) -{ - ergodox_led_all_off(); - ergodox_led_all_set(LED_BRIGHTNESS_HI); - ergodox_led_all_on(); - _delay_ms(333); - ergodox_led_all_off(); -} - -uint8_t init_mcp23018(void) { - mcp23018_status = 0x20; - - // I2C subsystem - if (i2c_initialized == 0) { - i2c_init(); // on pins D(1,0) - i2c_initialized++; - _delay_ms(1000); - } - - // set pin direction - // - unused : input : 1 - // - input : input : 1 - // - driving : output : 0 - mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(IODIRA); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(0b00000000); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(0b00111111); if (mcp23018_status) goto out; - i2c_stop(); - - // set pull-up - // - unused : on : 1 - // - input : on : 1 - // - driving : off : 0 - mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(GPPUA); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(0b00000000); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(0b00111111); if (mcp23018_status) goto out; - -out: - i2c_stop(); - - if (!mcp23018_status) mcp23018_status = ergodox_left_leds_update(); - - return mcp23018_status; -} - -uint8_t ergodox_left_leds_update(void) { - if (mcp23018_status) { // if there was an error - return mcp23018_status; - } - - // set logical value (doesn't matter on inputs) - // - unused : hi-Z : 1 - // - input : hi-Z : 1 - // - driving : hi-Z : 1 - mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(OLATA); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(0b11111111 - & ~(ergodox_left_led_3<<LEFT_LED_3_SHIFT) - ); if (mcp23018_status) goto out; - mcp23018_status = i2c_write(0b11111111 - & ~(ergodox_left_led_2<<LEFT_LED_2_SHIFT) - & ~(ergodox_left_led_1<<LEFT_LED_1_SHIFT) - ); if (mcp23018_status) goto out; - -out: - i2c_stop(); - return mcp23018_status; -} - diff --git a/keyboard/ergodox/ergodox.h b/keyboard/ergodox/ergodox.h deleted file mode 100644 index 9d0691dfe2..0000000000 --- a/keyboard/ergodox/ergodox.h +++ /dev/null @@ -1,145 +0,0 @@ -#ifndef PLANCK_H -#define PLANCK_H - -#include "matrix.h" -#include "keymap_common.h" -#include "backlight.h" -#include <stddef.h> -#include <stdint.h> -#include <stdbool.h> -#include <avr/io.h> -#include "i2cmaster.h" -#include <util/delay.h> - -#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n)) -#define CPU_16MHz 0x00 - -// I2C aliases and register addresses (see "mcp23018.md") -#define I2C_ADDR 0b0100000 -#define I2C_ADDR_WRITE ( (I2C_ADDR<<1) | I2C_WRITE ) -#define I2C_ADDR_READ ( (I2C_ADDR<<1) | I2C_READ ) -#define IODIRA 0x00 // i/o direction register -#define IODIRB 0x01 -#define GPPUA 0x0C // GPIO pull-up resistor register -#define GPPUB 0x0D -#define GPIOA 0x12 // general purpose i/o port register (write modifies OLAT) -#define GPIOB 0x13 -#define OLATA 0x14 // output latch register -#define OLATB 0x15 - -extern uint8_t mcp23018_status; - -void init_ergodox(void); -void ergodox_blink_all_leds(void); -uint8_t init_mcp23018(void); -uint8_t ergodox_left_leds_update(void); - -#define LED_BRIGHTNESS_LO 31 -#define LED_BRIGHTNESS_HI 255 - -#define LEFT_LED_1_SHIFT 7 // in MCP23018 port B -#define LEFT_LED_2_SHIFT 6 // in MCP23018 port B -#define LEFT_LED_3_SHIFT 7 // in MCP23018 port A - -extern bool ergodox_left_led_1; // left top -extern bool ergodox_left_led_2; // left middle -extern bool ergodox_left_led_3; // left bottom - -inline void ergodox_board_led_on(void) { DDRD |= (1<<6); PORTD |= (1<<6); } -inline void ergodox_right_led_1_on(void) { DDRB |= (1<<5); PORTB |= (1<<5); } -inline void ergodox_right_led_2_on(void) { DDRB |= (1<<6); PORTB |= (1<<6); } -inline void ergodox_right_led_3_on(void) { DDRB |= (1<<7); PORTB |= (1<<7); } -inline void ergodox_left_led_1_on(void) { ergodox_left_led_1 = 1; } -inline void ergodox_left_led_2_on(void) { ergodox_left_led_2 = 1; } -inline void ergodox_left_led_3_on(void) { ergodox_left_led_3 = 1; } - -inline void ergodox_board_led_off(void) { DDRD &= ~(1<<6); PORTD &= ~(1<<6); } -inline void ergodox_right_led_1_off(void) { DDRB &= ~(1<<5); PORTB &= ~(1<<5); } -inline void ergodox_right_led_2_off(void) { DDRB &= ~(1<<6); PORTB &= ~(1<<6); } -inline void ergodox_right_led_3_off(void) { DDRB &= ~(1<<7); PORTB &= ~(1<<7); } -inline void ergodox_left_led_1_off(void) { ergodox_left_led_1 = 0; } -inline void ergodox_left_led_2_off(void) { ergodox_left_led_2 = 0; } -inline void ergodox_left_led_3_off(void) { ergodox_left_led_3 = 0; } - -inline void ergodox_led_all_on(void) -{ - ergodox_board_led_on(); - ergodox_right_led_1_on(); - ergodox_right_led_2_on(); - ergodox_right_led_3_on(); - ergodox_left_led_1_on(); - ergodox_left_led_2_on(); - ergodox_left_led_3_on(); - ergodox_left_leds_update(); -} - -inline void ergodox_led_all_off(void) -{ - ergodox_board_led_off(); - ergodox_right_led_1_off(); - ergodox_right_led_2_off(); - ergodox_right_led_3_off(); - ergodox_left_led_1_off(); - ergodox_left_led_2_off(); - ergodox_left_led_3_off(); - ergodox_left_leds_update(); -} - -inline void ergodox_right_led_1_set(uint8_t n) { OCR1A = n; } -inline void ergodox_right_led_2_set(uint8_t n) { OCR1B = n; } -inline void ergodox_right_led_3_set(uint8_t n) { OCR1C = n; } - -inline void ergodox_led_all_set(uint8_t n) -{ - ergodox_right_led_1_set(n); - ergodox_right_led_2_set(n); - ergodox_right_led_3_set(n); -} - -#define KEYMAP( \ - \ - /* left hand, spatial positions */ \ - k00,k01,k02,k03,k04,k05,k06, \ - k10,k11,k12,k13,k14,k15,k16, \ - k20,k21,k22,k23,k24,k25, \ - k30,k31,k32,k33,k34,k35,k36, \ - k40,k41,k42,k43,k44, \ - k55,k56, \ - k54, \ - k53,k52,k51, \ - \ - /* right hand, spatial positions */ \ - k07,k08,k09,k0A,k0B,k0C,k0D, \ - k17,k18,k19,k1A,k1B,k1C,k1D, \ - k28,k29,k2A,k2B,k2C,k2D, \ - k37,k38,k39,k3A,k3B,k3C,k3D, \ - k49,k4A,k4B,k4C,k4D, \ - k57,k58, \ - k59, \ - k5C,k5B,k5A ) \ - \ - /* matrix positions */ \ - { \ - { k00, k10, k20, k30, k40, KC_NO }, \ - { k01, k11, k21, k31, k41, k51 }, \ - { k02, k12, k22, k32, k42, k52 }, \ - { k03, k13, k23, k33, k43, k53 }, \ - { k04, k14, k24, k34, k44, k54 }, \ - { k05, k15, k25, k35, KC_NO, k55 }, \ - { k06, k16, KC_NO, k36, KC_NO, k56 }, \ - \ - { k07, k17, KC_NO, k37,KC_NO, k57 }, \ - { k08, k18, k28, k38,KC_NO, k58 }, \ - { k09, k19, k29, k39, k49, k59 }, \ - { k0A, k1A, k2A, k3A, k4A, k5A }, \ - { k0B, k1B, k2B, k3B, k4B, k5B }, \ - { k0C, k1C, k2C, k3C, k4C, k5C }, \ - { k0D, k1D, k2D, k3D, k4D, KC_NO } \ - } - -void * matrix_init_user(void); -void * matrix_scan_user(void); - - - -#endif
\ No newline at end of file diff --git a/keyboard/ergodox/i2cmaster.h b/keyboard/ergodox/i2cmaster.h deleted file mode 100644 index 3917b9e6c0..0000000000 --- a/keyboard/ergodox/i2cmaster.h +++ /dev/null @@ -1,178 +0,0 @@ -#ifndef _I2CMASTER_H -#define _I2CMASTER_H 1 -/************************************************************************* -* Title: C include file for the I2C master interface -* (i2cmaster.S or twimaster.c) -* Author: Peter Fleury <pfleury@gmx.ch> http://jump.to/fleury -* File: $Id: i2cmaster.h,v 1.10 2005/03/06 22:39:57 Peter Exp $ -* Software: AVR-GCC 3.4.3 / avr-libc 1.2.3 -* Target: any AVR device -* Usage: see Doxygen manual -**************************************************************************/ - -#ifdef DOXYGEN -/** - @defgroup pfleury_ic2master I2C Master library - @code #include <i2cmaster.h> @endcode - - @brief I2C (TWI) Master Software Library - - Basic routines for communicating with I2C slave devices. This single master - implementation is limited to one bus master on the I2C bus. - - This I2c library is implemented as a compact assembler software implementation of the I2C protocol - which runs on any AVR (i2cmaster.S) and as a TWI hardware interface for all AVR with built-in TWI hardware (twimaster.c). - Since the API for these two implementations is exactly the same, an application can be linked either against the - software I2C implementation or the hardware I2C implementation. - - Use 4.7k pull-up resistor on the SDA and SCL pin. - - Adapt the SCL and SDA port and pin definitions and eventually the delay routine in the module - i2cmaster.S to your target when using the software I2C implementation ! - - Adjust the CPU clock frequence F_CPU in twimaster.c or in the Makfile when using the TWI hardware implementaion. - - @note - The module i2cmaster.S is based on the Atmel Application Note AVR300, corrected and adapted - to GNU assembler and AVR-GCC C call interface. - Replaced the incorrect quarter period delays found in AVR300 with - half period delays. - - @author Peter Fleury pfleury@gmx.ch http://jump.to/fleury - - @par API Usage Example - The following code shows typical usage of this library, see example test_i2cmaster.c - - @code - - #include <i2cmaster.h> - - - #define Dev24C02 0xA2 // device address of EEPROM 24C02, see datasheet - - int main(void) - { - unsigned char ret; - - i2c_init(); // initialize I2C library - - // write 0x75 to EEPROM address 5 (Byte Write) - i2c_start_wait(Dev24C02+I2C_WRITE); // set device address and write mode - i2c_write(0x05); // write address = 5 - i2c_write(0x75); // write value 0x75 to EEPROM - i2c_stop(); // set stop conditon = release bus - - - // read previously written value back from EEPROM address 5 - i2c_start_wait(Dev24C02+I2C_WRITE); // set device address and write mode - - i2c_write(0x05); // write address = 5 - i2c_rep_start(Dev24C02+I2C_READ); // set device address and read mode - - ret = i2c_readNak(); // read one byte from EEPROM - i2c_stop(); - - for(;;); - } - @endcode - -*/ -#endif /* DOXYGEN */ - -/**@{*/ - -#if (__GNUC__ * 100 + __GNUC_MINOR__) < 304 -#error "This library requires AVR-GCC 3.4 or later, update to newer AVR-GCC compiler !" -#endif - -#include <avr/io.h> - -/** defines the data direction (reading from I2C device) in i2c_start(),i2c_rep_start() */ -#define I2C_READ 1 - -/** defines the data direction (writing to I2C device) in i2c_start(),i2c_rep_start() */ -#define I2C_WRITE 0 - - -/** - @brief initialize the I2C master interace. Need to be called only once - @param void - @return none - */ -extern void i2c_init(void); - - -/** - @brief Terminates the data transfer and releases the I2C bus - @param void - @return none - */ -extern void i2c_stop(void); - - -/** - @brief Issues a start condition and sends address and transfer direction - - @param addr address and transfer direction of I2C device - @retval 0 device accessible - @retval 1 failed to access device - */ -extern unsigned char i2c_start(unsigned char addr); - - -/** - @brief Issues a repeated start condition and sends address and transfer direction - - @param addr address and transfer direction of I2C device - @retval 0 device accessible - @retval 1 failed to access device - */ -extern unsigned char i2c_rep_start(unsigned char addr); - - -/** - @brief Issues a start condition and sends address and transfer direction - - If device is busy, use ack polling to wait until device ready - @param addr address and transfer direction of I2C device - @return none - */ -extern void i2c_start_wait(unsigned char addr); - - -/** - @brief Send one byte to I2C device - @param data byte to be transfered - @retval 0 write successful - @retval 1 write failed - */ -extern unsigned char i2c_write(unsigned char data); - - -/** - @brief read one byte from the I2C device, request more data from device - @return byte read from I2C device - */ -extern unsigned char i2c_readAck(void); - -/** - @brief read one byte from the I2C device, read is followed by a stop condition - @return byte read from I2C device - */ -extern unsigned char i2c_readNak(void); - -/** - @brief read one byte from the I2C device - - Implemented as a macro, which calls either i2c_readAck or i2c_readNak - - @param ack 1 send ack, request more data from device<br> - 0 send nak, read is followed by a stop condition - @return byte read from I2C device - */ -extern unsigned char i2c_read(unsigned char ack); -#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); - - -/**@}*/ -#endif diff --git a/keyboard/ergodox/keymaps/keymap_cub.c b/keyboard/ergodox/keymaps/keymap_cub.c deleted file mode 100644 index 6e6d0cd8df..0000000000 --- a/keyboard/ergodox/keymaps/keymap_cub.c +++ /dev/null @@ -1,595 +0,0 @@ -static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* - * Keymap: Default Layer in QWERTY - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | ~ | 1 | 2 | 3 | 4 | 5 | \ | | - | 6 | 7 | 8 | 9 | 0 | = | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | Tab | Q | W | E | R | T | ~L5 | | ~L6 | Y | U | I | O | P | [ | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | Tab/Shf| A | S | D | F | G |------| |------| H | J | K | L | ; | ' | - * |--------+------+------+------+------+------| L0 | | ~L7 |------+------+------+------+------+--------| - * | LCtrl | Z | X | C | V | B | | | | N | M | , | . | / | ] | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | ~L5 | ~L2 | Caps | LAlt | LGui | | Lft | Up | Dn | Rght | ~L6 | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | +L2 | Home | | PgUp | Del | - * ,------|------|------| |------+------+------. - * | | | End | | PgDn | | | - * | BkSp | ESC |------| |------| Enter| Space| - * | | | Spc | | Ins | | | - * `--------------------' `--------------------' - * - * - * - **************************************************************************************************** - * - * Under XOrg, I use my own mapping from QWERTY to "Workman for Programmers" - * See XOrg files in ./addons/ subdirectory. - * - * I have to do so, because of two things: - * 1) my native language is Russian, and XOrg keymap for it is based on QWERTY layout - * 2) I want to have non-standart shifted keys, like $ (as normal) and @ (as shifted), or _ and - - * - * And even if (2) could be solved using FN* keys (but there is limit in firmware for only 32 such - * keys), then (1) can't be solved at firmware level at all. - * - * So, I have to stick with QWERTY as my main layout + my own XOrg keyboard layout for English. - * But sometimes I have to input something when XOrg is not active - for example, in Linux console, - * or in firmware console (while debugging firmware), or when keyboard is connected to not my computer. - * - * For such cases I have Layer1 :) - * // hint: switch to Layer1 is only at Layer6 - * - **************************************************************************************************** - * - * - * - * Keymap: Default Layer in Workman - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | ~ | ; | ! | # | { | } | ' | | ^ | [ | ] | * | ( | ) | = | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | Tab | Q | D | R | W | B | NO | | ~L7 | J | F | U | P | $ | : | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | Tab/Shf| A | S | H | T | G |------| |------| Y | N | E | O | I | - | - * |--------+------+------+------+------+------| Home | | End |------+------+------+------+------+--------| - * | LCtrl | Z | X | M | C | V | | | | K | L | , | . | / | | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | ~L5 | ~L2 | Caps | LAlt | LGui | | Lft | Up | Dn | Rght | ~L6 | - * `----------------------------------' `----------------------------------' - * |