diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/chibios/ws2812_pwm.c | 11 | ||||
| -rw-r--r-- | drivers/chibios/ws2812_spi.c | 45 | ||||
| -rw-r--r-- | drivers/oled/oled_driver.c | 8 | ||||
| -rw-r--r-- | drivers/oled/oled_driver.h | 4 |
4 files changed, 61 insertions, 7 deletions
diff --git a/drivers/chibios/ws2812_pwm.c b/drivers/chibios/ws2812_pwm.c index 140120d488..e6af55b6b3 100644 --- a/drivers/chibios/ws2812_pwm.c +++ b/drivers/chibios/ws2812_pwm.c @@ -27,6 +27,15 @@ # error "please consult your MCU's datasheet and specify in your config.h: #define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM?_UP" #endif +#ifndef WS2812_PWM_COMPLEMENTARY_OUTPUT +# define WS2812_PWM_OUTPUT_MODE PWM_OUTPUT_ACTIVE_HIGH +#else +# if !STM32_PWM_USE_ADVANCED +# error "WS2812_PWM_COMPLEMENTARY_OUTPUT requires STM32_PWM_USE_ADVANCED == TRUE" +# endif +# define WS2812_PWM_OUTPUT_MODE PWM_COMPLEMENTARY_OUTPUT_ACTIVE_HIGH +#endif + // Push Pull or Open Drain Configuration // Default Push Pull #ifndef WS2812_EXTERNAL_PULLUP @@ -247,7 +256,7 @@ void ws2812_init(void) { .channels = { [0 ... 3] = {.mode = PWM_OUTPUT_DISABLED, .callback = NULL}, // Channels default to disabled - [WS2812_PWM_CHANNEL - 1] = {.mode = PWM_OUTPUT_ACTIVE_HIGH, .callback = NULL}, // Turn on the channel we care about + [WS2812_PWM_CHANNEL - 1] = {.mode = WS2812_PWM_OUTPUT_MODE, .callback = NULL}, // Turn on the channel we care about }, .cr2 = 0, .dier = TIM_DIER_UDE, // DMA on update event for next period diff --git a/drivers/chibios/ws2812_spi.c b/drivers/chibios/ws2812_spi.c index 89df2987b5..e02cbabc02 100644 --- a/drivers/chibios/ws2812_spi.c +++ b/drivers/chibios/ws2812_spi.c @@ -32,6 +32,37 @@ # endif #endif +// Define SPI config speed +// baudrate should target 3.2MHz +// F072 fpclk = 48MHz +// 48/16 = 3Mhz +#if WS2812_SPI_DIVISOR == 2 +# define WS2812_SPI_DIVISOR (0) +#elif WS2812_SPI_DIVISOR == 4 +# define WS2812_SPI_DIVISOR (SPI_CR1_BR_0) +#elif WS2812_SPI_DIVISOR == 8 +# define WS2812_SPI_DIVISOR (SPI_CR1_BR_1) +#elif WS2812_SPI_DIVISOR == 16 // same as default +# define WS2812_SPI_DIVISOR (SPI_CR1_BR_1 | SPI_CR1_BR_0) +#elif WS2812_SPI_DIVISOR == 32 +# define WS2812_SPI_DIVISOR (SPI_CR1_BR_2) +#elif WS2812_SPI_DIVISOR == 64 +# define WS2812_SPI_DIVISOR (SPI_CR1_BR_2 | SPI_CR1_BR_0) +#elif WS2812_SPI_DIVISOR == 128 +# define WS2812_SPI_DIVISOR (SPI_CR1_BR_2 | SPI_CR1_BR_1) +#elif WS2812_SPI_DIVISOR == 256 +# define WS2812_SPI_DIVISOR (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0) +#else +# define WS2812_SPI_DIVISOR (SPI_CR1_BR_1 | SPI_CR1_BR_0) // default +#endif + +// Use SPI circular buffer +#ifdef WS2812_SPI_USE_CIRCULAR_BUFFER +# define WS2812_SPI_BUFFER_MODE 1 // circular buffer +#else +# define WS2812_SPI_BUFFER_MODE 0 // normal buffer +#endif + #define BYTES_FOR_LED_BYTE 4 #define NB_COLORS 3 #define BYTES_FOR_LED (BYTES_FOR_LED_BYTE * NB_COLORS) @@ -81,14 +112,14 @@ void ws2812_init(void) { palSetLineMode(RGB_DI_PIN, WS2812_OUTPUT_MODE); // TODO: more dynamic baudrate - static const SPIConfig spicfg = { - 0, NULL, PAL_PORT(RGB_DI_PIN), PAL_PAD(RGB_DI_PIN), - SPI_CR1_BR_1 | SPI_CR1_BR_0 // baudrate : fpclk / 8 => 1tick is 0.32us (2.25 MHz) - }; + static const SPIConfig spicfg = {WS2812_SPI_BUFFER_MODE, NULL, PAL_PORT(RGB_DI_PIN), PAL_PAD(RGB_DI_PIN), WS2812_SPI_DIVISOR}; spiAcquireBus(&WS2812_SPI); /* Acquire ownership of the bus. */ spiStart(&WS2812_SPI, &spicfg); /* Setup transfer parameters. */ spiSelect(&WS2812_SPI); /* Slave Select assertion. */ +#ifdef WS2812_SPI_USE_CIRCULAR_BUFFER + spiStartSend(&WS2812_SPI, sizeof(txbuf) / sizeof(txbuf[0]), txbuf); +#endif } void ws2812_setleds(LED_TYPE* ledarray, uint16_t leds) { @@ -104,9 +135,11 @@ void ws2812_setleds(LED_TYPE* ledarray, uint16_t leds) { // Send async - each led takes ~0.03ms, 50 leds ~1.5ms, animations flushing faster than send will cause issues. // Instead spiSend can be used to send synchronously (or the thread logic can be added back). -#ifdef WS2812_SPI_SYNC +#ifndef WS2812_SPI_USE_CIRCULAR_BUFFER +# ifdef WS2812_SPI_SYNC spiSend(&WS2812_SPI, sizeof(txbuf) / sizeof(txbuf[0]), txbuf); -#else +# else spiStartSend(&WS2812_SPI, sizeof(txbuf) / sizeof(txbuf[0]), txbuf); +# endif #endif } diff --git a/drivers/oled/oled_driver.c b/drivers/oled/oled_driver.c index 92c64399e2..6c1238cd6f 100644 --- a/drivers/oled/oled_driver.c +++ b/drivers/oled/oled_driver.c @@ -24,6 +24,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "progmem.h" +#include "keyboard.h" + // Used commands from spec sheet: https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf // for SH1106: https://www.velleman.eu/downloads/29/infosheets/sh1106_datasheet.pdf @@ -152,6 +154,12 @@ static void InvertCharacter(uint8_t *cursor) { } bool oled_init(uint8_t rotation) { +#if defined(USE_I2C) && defined(SPLIT_KEYBOARD) + if (!is_keyboard_master()) { + return true; + } +#endif + oled_rotation = oled_init_user(rotation); if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) { oled_rotation_width = OLED_DISPLAY_WIDTH; diff --git a/drivers/oled/oled_driver.h b/drivers/oled/oled_driver.h index 72ab21247d..00896f01c2 100644 --- a/drivers/oled/oled_driver.h +++ b/drivers/oled/oled_driver.h @@ -158,6 +158,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define OLED_I2C_TIMEOUT 100 #endif +#if !defined(OLED_UPDATE_INTERVAL) && defined(SPLIT_KEYBOARD) +# define OLED_UPDATE_INTERVAL 50 +#endif + typedef struct __attribute__((__packed__)) { uint8_t *current_element; uint16_t remaining_element_count; |