diff options
Diffstat (limited to 'drivers')
47 files changed, 365 insertions, 267 deletions
diff --git a/drivers/bluetooth/bluefruit_le.cpp b/drivers/bluetooth/bluefruit_le.cpp index 86581a1a48..19310767cf 100644 --- a/drivers/bluetooth/bluefruit_le.cpp +++ b/drivers/bluetooth/bluefruit_le.cpp @@ -29,7 +29,7 @@ #endif #ifndef BLUEFRUIT_LE_SCK_DIVISOR -# define BLUEFRUIT_LE_SCK_DIVISOR 2 // 4MHz SCK/8MHz CPU, calculated for Feather 32U4 BLE +# define BLUEFRUIT_LE_SCK_DIVISOR 2 // 4MHz SCK/8MHz CPU, calculated for Feather 32U4 BLE #endif #define SAMPLE_BATTERY @@ -77,10 +77,10 @@ struct sdep_msg { // information here. enum queue_type { - QTKeyReport, // 1-byte modifier + 6-byte key report - QTConsumer, // 16-bit key code + QTKeyReport, // 1-byte modifier + 6-byte key report + QTConsumer, // 16-bit key code #ifdef MOUSE_ENABLE - QTMouseMove, // 4-byte mouse report + QTMouseMove, // 4-byte mouse report #endif }; @@ -115,8 +115,8 @@ enum sdep_type { SdepResponse = 0x20, SdepAlert = 0x40, SdepError = 0x80, - SdepSlaveNotReady = 0xFE, // Try again later - SdepSlaveOverflow = 0xFF, // You read more data than is available + SdepSlaveNotReady = 0xFE, // Try again later + SdepSlaveOverflow = 0xFF, // You read more data than is available }; enum ble_cmd { @@ -306,13 +306,15 @@ static bool ble_init(void) { wait_ms(10); writePinHigh(BLUEFRUIT_LE_RST_PIN); - wait_ms(1000); // Give it a second to initialize + wait_ms(1000); // Give it a second to initialize state.initialized = true; return state.initialized; } -static inline uint8_t min(uint8_t a, uint8_t b) { return a < b ? a : b; } +static inline uint8_t min(uint8_t a, uint8_t b) { + return a < b ? a : b; +} static bool read_response(char *resp, uint16_t resplen, bool verbose) { char *dest = resp; @@ -424,7 +426,9 @@ bool at_command_P(const char *cmd, char *resp, uint16_t resplen, bool verbose) { return at_command(cmdbuf, resp, resplen, verbose); } -bool bluefruit_le_is_connected(void) { return state.is_connected; } +bool bluefruit_le_is_connected(void) { + return state.is_connected; +} bool bluefruit_le_enable_keyboard(void) { char resbuf[128]; @@ -671,7 +675,9 @@ void bluefruit_le_send_mouse_move(int8_t x, int8_t y, int8_t scroll, int8_t pan, } #endif -uint32_t bluefruit_le_read_battery_voltage(void) { return state.vbat; } +uint32_t bluefruit_le_read_battery_voltage(void) { + return state.vbat; +} bool bluefruit_le_set_mode_leds(bool on) { if (!state.configured) { diff --git a/drivers/bluetooth/outputselect.c b/drivers/bluetooth/outputselect.c index 44bc4a9aa3..b986ba274e 100644 --- a/drivers/bluetooth/outputselect.c +++ b/drivers/bluetooth/outputselect.c @@ -52,7 +52,7 @@ uint8_t auto_detect_output(void) { #endif #ifdef BLUETOOTH_ENABLE - return OUTPUT_BLUETOOTH; // should check if BT is connected here + return OUTPUT_BLUETOOTH; // should check if BT is connected here #endif return OUTPUT_NONE; diff --git a/drivers/bluetooth/rn42.c b/drivers/bluetooth/rn42.c index 2ef40bb7e0..5d497cda20 100644 --- a/drivers/bluetooth/rn42.c +++ b/drivers/bluetooth/rn42.c @@ -61,7 +61,9 @@ static inline uint16_t rn42_consumer_usage_to_bitmap(uint16_t usage) { } } -void rn42_init(void) { uart_init(RN42_BAUD_RATE); } +void rn42_init(void) { + uart_init(RN42_BAUD_RATE); +} void rn42_send_keyboard(report_keyboard_t *report) { uart_write(0xFD); @@ -81,8 +83,8 @@ void rn42_send_mouse(report_mouse_t *report) { uart_write(report->buttons); uart_write(report->x); uart_write(report->y); - uart_write(report->v); // should try sending the wheel v here - uart_write(report->h); // should try sending the wheel h here + uart_write(report->v); // should try sending the wheel v here + uart_write(report->h); // should try sending the wheel h here uart_write(0x00); } diff --git a/drivers/eeprom/eeprom_driver.c b/drivers/eeprom/eeprom_driver.c index 6ce47faf7d..885cf21981 100644 --- a/drivers/eeprom/eeprom_driver.c +++ b/drivers/eeprom/eeprom_driver.c @@ -37,11 +37,17 @@ uint32_t eeprom_read_dword(const uint32_t *addr) { return ret; } -void eeprom_write_byte(uint8_t *addr, uint8_t value) { eeprom_write_block(&value, addr, 1); } +void eeprom_write_byte(uint8_t *addr, uint8_t value) { + eeprom_write_block(&value, addr, 1); +} -void eeprom_write_word(uint16_t *addr, uint16_t value) { eeprom_write_block(&value, addr, 2); } +void eeprom_write_word(uint16_t *addr, uint16_t value) { + eeprom_write_block(&value, addr, 2); +} -void eeprom_write_dword(uint32_t *addr, uint32_t value) { eeprom_write_block(&value, addr, 4); } +void eeprom_write_dword(uint32_t *addr, uint32_t value) { + eeprom_write_block(&value, addr, 4); +} void eeprom_update_block(const void *buf, void *addr, size_t len) { uint8_t read_buf[len]; diff --git a/drivers/eeprom/eeprom_i2c.c b/drivers/eeprom/eeprom_i2c.c index 8e80ff544f..a74a010415 100644 --- a/drivers/eeprom/eeprom_i2c.c +++ b/drivers/eeprom/eeprom_i2c.c @@ -43,7 +43,7 @@ #if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT) # include "timer.h" # include "debug.h" -#endif // DEBUG_EEPROM_OUTPUT +#endif // DEBUG_EEPROM_OUTPUT static inline void fill_target_address(uint8_t *buffer, const void *addr) { uintptr_t p = (uintptr_t)addr; @@ -91,7 +91,7 @@ void eeprom_read_block(void *buf, const void *addr, size_t len) { dprintf(" %02X", (int)(((uint8_t *)buf)[i])); } dprintf("\n"); -#endif // DEBUG_EEPROM_OUTPUT +#endif // DEBUG_EEPROM_OUTPUT } void eeprom_write_block(const void *buf, void *addr, size_t len) { @@ -122,7 +122,7 @@ void eeprom_write_block(const void *buf, void *addr, size_t len) { dprintf(" %02X", (int)(read_buf[i])); } dprintf("\n"); -#endif // DEBUG_EEPROM_OUTPUT +#endif // DEBUG_EEPROM_OUTPUT i2c_transmit(EXTERNAL_EEPROM_I2C_ADDRESS((uintptr_t)addr), complete_packet, EXTERNAL_EEPROM_ADDRESS_SIZE + write_length, 100); wait_ms(EXTERNAL_EEPROM_WRITE_TIME); diff --git a/drivers/eeprom/eeprom_spi.c b/drivers/eeprom/eeprom_spi.c index e273090854..25955498c4 100644 --- a/drivers/eeprom/eeprom_spi.c +++ b/drivers/eeprom/eeprom_spi.c @@ -52,7 +52,9 @@ # define EXTERNAL_EEPROM_SPI_TIMEOUT 100 #endif -static bool spi_eeprom_start(void) { return spi_start(EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN, EXTERNAL_EEPROM_SPI_LSBFIRST, EXTERNAL_EEPROM_SPI_MODE, EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR); } +static bool spi_eeprom_start(void) { + return spi_start(EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN, EXTERNAL_EEPROM_SPI_LSBFIRST, EXTERNAL_EEPROM_SPI_MODE, EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR); +} static spi_status_t spi_eeprom_wait_while_busy(int timeout) { uint32_t deadline = timer_read32() + timeout; @@ -80,7 +82,9 @@ static void spi_eeprom_transmit_address(uintptr_t addr) { //---------------------------------------------------------------------------------------------------------------------- -void eeprom_driver_init(void) { spi_init(); } +void eeprom_driver_init(void) { + spi_init(); +} void eeprom_driver_erase(void) { #if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT) @@ -135,7 +139,7 @@ void eeprom_read_block(void *buf, const void *addr, size_t len) { dprintf(" %02X", (int)(((uint8_t *)buf)[i])); } dprintf("\n"); -#endif // DEBUG_EEPROM_OUTPUT +#endif // DEBUG_EEPROM_OUTPUT spi_stop(); } @@ -192,7 +196,7 @@ void eeprom_write_block(const void *buf, void *addr, size_t len) { dprintf(" %02X", (int)(uint8_t)(read_buf[i])); } dprintf("\n"); -#endif // DEBUG_EEPROM_OUTPUT +#endif // DEBUG_EEPROM_OUTPUT spi_write(CMD_WRITE); spi_eeprom_transmit_address(target_addr); diff --git a/drivers/eeprom/eeprom_transient.c b/drivers/eeprom/eeprom_transient.c index b4c78c6f40..9dc4289c27 100644 --- a/drivers/eeprom/eeprom_transient.c +++ b/drivers/eeprom/eeprom_transient.c @@ -30,9 +30,13 @@ size_t clamp_length(intptr_t offset, size_t len) { return len; } -void eeprom_driver_init(void) { eeprom_driver_erase(); } +void eeprom_driver_init(void) { + eeprom_driver_erase(); +} -void eeprom_driver_erase(void) { memset(transientBuffer, 0x00, TRANSIENT_EEPROM_SIZE); } +void eeprom_driver_erase(void) { + memset(transientBuffer, 0x00, TRANSIENT_EEPROM_SIZE); +} void eeprom_read_block(void *buf, const void *addr, size_t len) { intptr_t offset = (intptr_t)addr; diff --git a/drivers/eeprom/eeprom_transient.h b/drivers/eeprom/eeprom_transient.h index d06189b246..687b8619fe 100644 --- a/drivers/eeprom/eeprom_transient.h +++ b/drivers/eeprom/eeprom_transient.h @@ -21,5 +21,5 @@ */ #ifndef TRANSIENT_EEPROM_SIZE # include "eeconfig.h" -# define TRANSIENT_EEPROM_SIZE (((EECONFIG_SIZE + 3) / 4) * 4) // based off eeconfig's current usage, aligned to 4-byte sizes, to deal with LTO +# define TRANSIENT_EEPROM_SIZE (((EECONFIG_SIZE + 3) / 4) * 4) // based off eeconfig's current usage, aligned to 4-byte sizes, to deal with LTO #endif diff --git a/drivers/flash/flash_spi.c b/drivers/flash/flash_spi.c index 2fa8891e38..f4cbf65159 100644 --- a/drivers/flash/flash_spi.c +++ b/drivers/flash/flash_spi.c @@ -65,7 +65,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define DEBUG_FLASH_SPI_OUTPUT -static bool spi_flash_start(void) { return spi_start(EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN, EXTERNAL_FLASH_SPI_LSBFIRST, EXTERNAL_FLASH_SPI_MODE, EXTERNAL_FLASH_SPI_CLOCK_DIVISOR); } +static bool spi_flash_start(void) { + return spi_start(EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN, EXTERNAL_FLASH_SPI_LSBFIRST, EXTERNAL_FLASH_SPI_MODE, EXTERNAL_FLASH_SPI_CLOCK_DIVISOR); +} static flash_status_t spi_flash_wait_while_busy(void) { uint32_t deadline = timer_read32() + EXTERNAL_FLASH_SPI_TIMEOUT; @@ -160,7 +162,9 @@ static flash_status_t spi_flash_transaction(uint8_t cmd, uint32_t addr, uint8_t return response; } -void flash_init(void) { spi_init(); } +void flash_init(void) { + spi_init(); +} flash_status_t flash_erase_chip(void) { flash_status_t response = FLASH_STATUS_SUCCESS; @@ -304,7 +308,7 @@ flash_status_t flash_read_block(uint32_t addr, void *buf, size_t len) { dprintf(" %02X", (int)(((uint8_t *)read_buf)[i])); } dprintf("\n"); -#endif // DEBUG_FLASH_SPI_OUTPUT +#endif // DEBUG_FLASH_SPI_OUTPUT return response; } @@ -340,7 +344,7 @@ flash_status_t flash_write_block(uint32_t addr, const void *buf, size_t len) { dprintf(" %02X", (int)(uint8_t)(write_buf[i])); } dprintf("\n"); -#endif // DEBUG_FLASH_SPI_OUTPUT +#endif // DEBUG_FLASH_SPI_OUTPUT /* Perform the write. */ response = spi_flash_transaction(FLASH_CMD_PP, addr, write_buf, write_length); diff --git a/drivers/gpio/mcp23018.c b/drivers/gpio/mcp23018.c index dc8ab03c50..41cbfe087e 100644 --- a/drivers/gpio/mcp23018.c +++ b/drivers/gpio/mcp23018.c @@ -10,11 +10,11 @@ #define TIMEOUT 100 enum { - CMD_IODIRA = 0x00, // i/o direction register + CMD_IODIRA = 0x00, // i/o direction register CMD_IODIRB = 0x01, - CMD_GPPUA = 0x0C, // GPIO pull-up resistor register + CMD_GPPUA = 0x0C, // GPIO pull-up resistor register CMD_GPPUB = 0x0D, - CMD_GPIOA = 0x12, // general purpose i/o port register (write modifies OLAT) + CMD_GPIOA = 0x12, // general purpose i/o port register (write modifies OLAT) CMD_GPIOB = 0x13, }; diff --git a/drivers/haptic/DRV2605L.c b/drivers/haptic/DRV2605L.c index 5de2b354c9..5a1d2ca0af 100644 --- a/drivers/haptic/DRV2605L.c +++ b/drivers/haptic/DRV2605L.c @@ -106,12 +106,14 @@ void DRV_init(void) { void DRV_rtp_init(void) { DRV_write(DRV_GO, 0x00); - DRV_write(DRV_RTP_INPUT, 20); // 20 is the lowest value I've found where haptics can still be felt. + DRV_write(DRV_RTP_INPUT, 20); // 20 is the lowest value I've found where haptics can still be felt. DRV_write(DRV_MODE, 0x05); DRV_write(DRV_GO, 0x01); } -void DRV_amplitude(uint8_t amplitude) { DRV_write(DRV_RTP_INPUT, amplitude); } +void DRV_amplitude(uint8_t amplitude) { + DRV_write(DRV_RTP_INPUT, amplitude); +} void DRV_pulse(uint8_t sequence) { DRV_write(DRV_GO, 0x00); diff --git a/drivers/haptic/solenoid.c b/drivers/haptic/solenoid.c index 7a09940f78..14d868bffe 100644 --- a/drivers/haptic/solenoid.c +++ b/drivers/haptic/solenoid.c @@ -28,13 +28,21 @@ uint8_t solenoid_dwell = SOLENOID_DEFAULT_DWELL; extern haptic_config_t haptic_config; -void solenoid_buzz_on(void) { haptic_set_buzz(1); } +void solenoid_buzz_on(void) { + haptic_set_buzz(1); +} -void solenoid_buzz_off(void) { haptic_set_buzz(0); } +void solenoid_buzz_off(void) { + haptic_set_buzz(0); +} -void solenoid_set_buzz(int buzz) { haptic_set_buzz(buzz); } +void solenoid_set_buzz(int buzz) { + haptic_set_buzz(buzz); +} -void solenoid_set_dwell(uint8_t dwell) { solenoid_dwell = dwell; } +void solenoid_set_dwell(uint8_t dwell) { + solenoid_dwell = dwell; +} void solenoid_stop(void) { SOLENOID_PIN_WRITE_INACTIVE(); @@ -89,4 +97,6 @@ void solenoid_setup(void) { } } -void solenoid_shutdown(void) { SOLENOID_PIN_WRITE_INACTIVE(); } +void solenoid_shutdown(void) { + SOLENOID_PIN_WRITE_INACTIVE(); +} diff --git a/drivers/lcd/st7565.c b/drivers/lcd/st7565.c index 49b13c00f1..47ee02804b 100644 --- a/drivers/lcd/st7565.c +++ b/drivers/lcd/st7565.c @@ -39,7 +39,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // Addressing Setting Commands #define PAM_SETCOLUMN_LSB 0x00 #define PAM_SETCOLUMN_MSB 0x10 -#define PAM_PAGE_ADDR 0xB0 // 0xb0 -- 0xb7 +#define PAM_PAGE_ADDR 0xB0 // 0xb0 -- 0xb7 // Hardware Configuration Commands #define DISPLAY_START_LINE 0x40 @@ -138,7 +138,9 @@ bool st7565_init(display_rotation_t rotation) { return true; } -__attribute__((weak)) display_rotation_t st7565_init_user(display_rotation_t rotation) { return rotation; } +__attribute__((weak)) display_rotation_t st7565_init_user(display_rotation_t rotation) { + return rotation; +} void st7565_clear(void) { memset(st7565_buffer, 0, sizeof(st7565_buffer)); @@ -212,7 +214,8 @@ void st7565_advance_page(bool clearPageRemainder) { remaining = remaining / ST7565_FONT_WIDTH; // Write empty character until next line - while (remaining--) st7565_write_char(' ', false); + while (remaining--) + st7565_write_char(' ', false); } else { // Next page index out of bounds? if (index + remaining >= ST7565_MATRIX_SIZE) { @@ -263,7 +266,7 @@ void st7565_write_char(const char data, bool invert) { _Static_assert(sizeof(font) >= ((ST7565_FONT_END + 1 - ST7565_FONT_START) * ST7565_FONT_WIDTH), "ST7565_FONT_END references outside array"); // set the reder buffer data - uint8_t cast_data = (uint8_t)data; // font based on unsigned type for index + uint8_t cast_data = (uint8_t)data; // font based on unsigned type for index if (cast_data < ST7565_FONT_START || cast_data > ST7565_FONT_END) { memset(st7565_cursor, 0x00, ST7565_FONT_WIDTH); } else { @@ -389,7 +392,7 @@ void st7565_write_raw_P(const char *data, uint16_t size) { st7565_dirty |= ((ST7565_BLOCK_TYPE)1 << (i / ST7565_BLOCK_SIZE)); } } -#endif // defined(__AVR__) +#endif // defined(__AVR__) bool st7565_on(void) { if (!st7565_initialized) { @@ -429,7 +432,9 @@ bool st7565_off(void) { __attribute__((weak)) void st7565_off_user(void) {} -bool st7565_is_on(void) { return st7565_active; } +bool st7565_is_on(void) { + return st7565_active; +} bool st7565_invert(bool invert) { if (!st7565_initialized) { @@ -445,9 +450,13 @@ bool st7565_invert(bool invert) { return st7565_inverted; } -uint8_t st7565_max_chars(void) { return ST7565_DISPLAY_WIDTH / ST7565_FONT_WIDTH; } +uint8_t st7565_max_chars(void) { + return ST7565_DISPLAY_WIDTH / ST7565_FONT_WIDTH; +} -uint8_t st7565_max_lines(void) { return ST7565_DISPLAY_HEIGHT / ST7565_FONT_HEIGHT; } +uint8_t st7565_max_lines(void) { + return ST7565_DISPLAY_HEIGHT / ST7565_FONT_HEIGHT; +} void st7565_task(void) { if (!st7565_initialized) { diff --git a/drivers/lcd/st7565.h b/drivers/lcd/st7565.h index d453dbe6da..0e42c8765b 100644 --- a/drivers/lcd/st7565.h +++ b/drivers/lcd/st7565.h @@ -29,16 +29,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. # define ST7565_DISPLAY_HEIGHT 32 #endif #ifndef ST7565_MATRIX_SIZE -# define ST7565_MATRIX_SIZE (ST7565_DISPLAY_HEIGHT / 8 * ST7565_DISPLAY_WIDTH) // 1024 (compile time mathed) +# define ST7565_MATRIX_SIZE (ST7565_DISPLAY_HEIGHT / 8 * ST7565_DISPLAY_WIDTH) // 1024 (compile time mathed) #endif #ifndef ST7565_BLOCK_TYPE # define ST7565_BLOCK_TYPE uint16_t #endif #ifndef ST7565_BLOCK_COUNT -# define ST7565_BLOCK_COUNT (sizeof(ST7565_BLOCK_TYPE) * 8) // 32 (compile time mathed) +# define ST7565_BLOCK_COUNT (sizeof(ST7565_BLOCK_TYPE) * 8) // 32 (compile time mathed) #endif #ifndef ST7565_BLOCK_SIZE -# define ST7565_BLOCK_SIZE (ST7565_MATRIX_SIZE / ST7565_BLOCK_COUNT) // 32 (compile time mathed) +# define ST7565_BLOCK_SIZE (ST7565_MATRIX_SIZE / ST7565_BLOCK_COUNT) // 32 (compile time mathed) #endif // the column address corresponding to the first column in the display hardware @@ -174,7 +174,7 @@ void st7565_write_raw_P(const char *data, uint16_t size); # define st7565_write_P(data, invert) st7565_write(data, invert) # define st7565_write_ln_P(data, invert) st7565_write_ln(data, invert) # define st7565_write_raw_P(data, size) st7565_write_raw(data, size) -#endif // defined(__AVR__) +#endif // defined(__AVR__) // Can be used to manually turn on the screen if it is off // Returns true if the screen was on or turns on diff --git a/drivers/led/apa102.c b/drivers/led/apa102.c index 00e7eb4505..f291948975 100644 --- a/drivers/led/apa102.c +++ b/drivers/led/apa102.c @@ -20,15 +20,15 @@ #ifndef APA102_NOPS # if defined(__AVR__) -# define APA102_NOPS 0 // AVR at 16 MHz already spends 62.5 ns per clock, so no extra delay is needed +# define APA102_NOPS 0 // AVR at 16 MHz already spends 62.5 ns per clock, so no extra delay is needed # elif defined(PROTOCOL_CHIBIOS) # include "hal.h" # if defined(STM32F0XX) || defined(STM32F1XX) || defined(STM32F3XX) || defined(STM32F4XX) || defined(STM32L0XX) || defined(GD32VF103) -# define APA102_NOPS (100 / (1000000000L / (CPU_CLOCK / 4))) // This calculates how many loops of 4 nops to run to delay 100 ns +# define APA102_NOPS (100 / (1000000000L / (CPU_CLOCK / 4))) // This calculates how many loops of 4 nops to run to delay 100 ns # else # error("APA102_NOPS configuration required") -# define APA102_NOPS 0 // this just pleases the compile so the above error is easier to spot +# define APA102_NOPS 0 // this just pleases the compile so the above error is easier to spot # endif # endif #endif @@ -72,7 +72,9 @@ void apa102_setleds(LED_TYPE *start_led, uint16_t num_leds) { } // Overwrite the default rgblight_call_driver to use apa102 driver -void rgblight_call_driver(LED_TYPE *start_led, uint8_t num_leds) { apa102_setleds(start_led, num_leds); } +void rgblight_call_driver(LED_TYPE *start_led, uint8_t num_leds) { + apa102_setleds(start_led, num_leds); +} void static apa102_init(void) { setPinOutput(RGB_DI_PIN); diff --git a/drivers/led/aw20216.c b/drivers/led/aw20216.c index 2c7ff8f088..59389cdcd6 100644 --- a/drivers/led/aw20216.c +++ b/drivers/led/aw20216.c @@ -23,17 +23,17 @@ */ #define AWINIC_ID 0b1010 << 4 -#define AW_PAGE_FUNCTION 0x00 << 1 // PG0, Function registers -#define AW_PAGE_PWM 0x01 << 1 // PG1, LED PWM control -#define AW_PAGE_SCALING 0x02 << 1 // PG2, LED current scaling control -#define AW_PAGE_PATCHOICE 0x03 << 1 // PG3, Pattern choice? -#define AW_PAGE_PWMSCALING 0x04 << 1 // PG4, LED PWM + Scaling control? +#define AW_PAGE_FUNCTION 0x00 << 1 // PG0, Function registers +#define AW_PAGE_PWM 0x01 << 1 // PG1, LED PWM control +#define AW_PAGE_SCALING 0x02 << 1 // PG2, LED current scaling control +#define AW_PAGE_PATCHOICE 0x03 << 1 // PG3, Pattern choice? +#define AW_PAGE_PWMSCALING 0x04 << 1 // PG4, LED PWM + Scaling control? #define AW_WRITE 0 #define AW_READ 1 -#define AW_REG_CONFIGURATION 0x00 // PG0 -#define AW_REG_GLOBALCURRENT 0x01 // PG0 +#define AW_REG_CONFIGURATION 0x00 // PG0 +#define AW_REG_GLOBALCURRENT 0x01 // PG0 // Default value of AW_REG_CONFIGURATION // D7:D4 = 1011, SWSEL (SW1~SW12 active) diff --git a/drivers/led/issi/is31fl3731-simple.c b/drivers/led/issi/is31fl3731-simple.c index f51e2e38af..3abe9ea337 100644 --- a/drivers/led/issi/is31fl3731-simple.c +++ b/drivers/led/issi/is31fl3731-simple.c @@ -42,13 +42,13 @@ #define ISSI_REG_PICTUREFRAME 0x01 // Not defined in the datasheet -- See AN for IC -#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting +#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting #define ISSI_REG_SHUTDOWN 0x0A #define ISSI_REG_AUDIOSYNC 0x06 #define ISSI_COMMANDREGISTER 0xFD -#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine' +#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine' #ifndef ISSI_TIMEOUT # define ISSI_TIMEOUT 100 @@ -148,7 +148,7 @@ void IS31FL3731_init(uint8_t addr) { // enable software shutdown IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00); -#ifdef ISSI_3731_DEGHOST // set to enable de-ghosting of the array +#ifdef ISSI_3731_DEGHOST // set to enable de-ghosting of the array IS31FL3731_write_register(addr, ISSI_REG_GHOST_IMAGE_PREVENTION, 0x10); #endif diff --git a/drivers/led/issi/is31fl3731.c b/drivers/led/issi/is31fl3731.c index e6190a6b90..9c6c29f081 100644 --- a/drivers/led/issi/is31fl3731.c +++ b/drivers/led/issi/is31fl3731.c @@ -41,13 +41,13 @@ #define ISSI_REG_PICTUREFRAME 0x01 // Not defined in the datasheet -- See AN for IC -#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting +#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting #define ISSI_REG_SHUTDOWN 0x0A #define ISSI_REG_AUDIOSYNC 0x06 #define ISSI_COMMANDREGISTER 0xFD -#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine' +#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine' #ifnd |