diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/led/issi/is31fl3731-simple.c | 7 | ||||
-rw-r--r-- | drivers/led/issi/is31fl3731.c | 7 | ||||
-rw-r--r-- | drivers/led/issi/is31fl3733.c | 11 | ||||
-rw-r--r-- | drivers/led/issi/is31fl3733.h | 9 | ||||
-rw-r--r-- | drivers/led/issi/is31fl3736.c | 13 | ||||
-rw-r--r-- | drivers/led/issi/is31fl3736.h | 10 | ||||
-rw-r--r-- | drivers/led/issi/is31fl3737.c | 13 | ||||
-rw-r--r-- | drivers/led/issi/is31fl3737.h | 10 | ||||
-rw-r--r-- | drivers/led/issi/is31fl3741.c | 10 | ||||
-rw-r--r-- | drivers/led/issi/is31fl3741.h | 9 |
10 files changed, 98 insertions, 1 deletions
diff --git a/drivers/led/issi/is31fl3731-simple.c b/drivers/led/issi/is31fl3731-simple.c index d295772f5e..9d28ea91d0 100644 --- a/drivers/led/issi/is31fl3731-simple.c +++ b/drivers/led/issi/is31fl3731-simple.c @@ -1,6 +1,7 @@ /* Copyright 2017 Jason Williams * Copyright 2018 Jack Humbert * Copyright 2019 Clueboard + * Copyright 2021 Doni Crosby * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -40,6 +41,9 @@ #define ISSI_REG_PICTUREFRAME 0x01 +// Not defined in the datasheet -- See AN for IC +#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting + #define ISSI_REG_SHUTDOWN 0x0A #define ISSI_REG_AUDIOSYNC 0x06 @@ -144,6 +148,9 @@ void IS31FL3731_init(uint8_t addr) { // enable software shutdown IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00); +#ifdef ISSI_3731_DEGHOST // set to enable de-ghosting of the array + IS31FL3731_write_register(addr, ISSI_REG_GHOST_IMAGE_PREVENTION, 0x10); +#endif // this delay was copied from other drivers, might not be needed wait_ms(10); diff --git a/drivers/led/issi/is31fl3731.c b/drivers/led/issi/is31fl3731.c index 110bdc1be4..fbf24c30fb 100644 --- a/drivers/led/issi/is31fl3731.c +++ b/drivers/led/issi/is31fl3731.c @@ -1,5 +1,6 @@ /* Copyright 2017 Jason Williams * Copyright 2018 Jack Humbert + * Copyright 2021 Doni Crosby * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -39,6 +40,9 @@ #define ISSI_REG_PICTUREFRAME 0x01 +// Not defined in the datasheet -- See AN for IC +#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting + #define ISSI_REG_SHUTDOWN 0x0A #define ISSI_REG_AUDIOSYNC 0x06 @@ -132,6 +136,9 @@ void IS31FL3731_init(uint8_t addr) { // enable software shutdown IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00); +#ifdef ISSI_3731_DEGHOST // set to enable de-ghosting of the array + IS31FL3731_write_register(addr, ISSI_REG_GHOST_IMAGE_PREVENTION, 0x10); +#endif // this delay was copied from other drivers, might not be needed wait_ms(10); diff --git a/drivers/led/issi/is31fl3733.c b/drivers/led/issi/is31fl3733.c index 4ddd827caf..c64d035135 100644 --- a/drivers/led/issi/is31fl3733.c +++ b/drivers/led/issi/is31fl3733.c @@ -1,6 +1,7 @@ /* Copyright 2017 Jason Williams * Copyright 2018 Jack Humbert * Copyright 2018 Yiancar + * Copyright 2021 Doni Crosby * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -58,6 +59,12 @@ #ifndef ISSI_PWM_FREQUENCY # define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only +#ifndef ISSI_SWPULLUP +# define ISSI_SWPULLUP PUR_0R +#endif + +#ifndef ISSI_CSPULLUP +# define ISSI_CSPULLUP PUR_0R #endif // Transfer buffer for TWITransmitData() @@ -158,6 +165,10 @@ void IS31FL3733_init(uint8_t addr, uint8_t sync) { // Select PG3 IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION); + // Set de-ghost pull-up resistors (SWx) + IS31FL3733_write_register(addr, ISSI_REG_SWPULLUP, ISSI_SWPULLUP); + // Set de-ghost pull-down resistors (CSx) + IS31FL3733_write_register(addr, ISSI_REG_CSPULLUP, ISSI_CSPULLUP); // Set global current to maximum. IS31FL3733_write_register(addr, ISSI_REG_GLOBALCURRENT, 0xFF); // Disable software shutdown. diff --git a/drivers/led/issi/is31fl3733.h b/drivers/led/issi/is31fl3733.h index 64fd38eb19..daa226b41a 100644 --- a/drivers/led/issi/is31fl3733.h +++ b/drivers/led/issi/is31fl3733.h @@ -1,6 +1,7 @@ /* Copyright 2017 Jason Williams * Copyright 2018 Jack Humbert * Copyright 2018 Yiancar + * Copyright 2021 Doni Crosby * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -47,6 +48,14 @@ void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bo void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index); void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index); +#define PUR_0R 0x00 // No PUR resistor +#define PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL +#define PUR_3KR 0x03 // 3.0k Ohm resistor on all the time +#define PUR_4KR 0x04 // 4.0k Ohm resistor on all the time +#define PUR_8KR 0x05 // 8.0k Ohm resistor on all the time +#define PUR_16KR 0x06 // 16k Ohm resistor on all the time +#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL + #define A_1 0x00 #define A_2 0x01 #define A_3 0x02 diff --git a/drivers/led/issi/is31fl3736.c b/drivers/led/issi/is31fl3736.c index 7dece1b1eb..dcaabba2ef 100644 --- a/drivers/led/issi/is31fl3736.c +++ b/drivers/led/issi/is31fl3736.c @@ -1,4 +1,5 @@ /* Copyright 2018 Jason Williams (Wilba) + * Copyright 2021 Doni Crosby * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -54,6 +55,14 @@ # define ISSI_PERSISTENCE 0 #endif +#ifndef ISSI_SWPULLUP +# define ISSI_SWPULLUP PUR_0R +#endif + +#ifndef ISSI_CSPULLUP +# define ISSI_CSPULLUP PUR_0R +#endif + // Transfer buffer for TWITransmitData() uint8_t g_twi_transfer_buffer[20]; @@ -140,6 +149,10 @@ void IS31FL3736_init(uint8_t addr) { // Select PG3 IS31FL3736_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION); + // Set de-ghost pull-up resistors (SWx) + IS31FL3736_write_register(addr, ISSI_REG_SWPULLUP, ISSI_SWPULLUP); + // Set de-ghost pull-down resistors (CSx) + IS31FL3736_write_register(addr, ISSI_REG_CSPULLUP, ISSI_CSPULLUP); // Set global current to maximum. IS31FL3736_write_register(addr, ISSI_REG_GLOBALCURRENT, 0xFF); // Disable software shutdown. diff --git a/drivers/led/issi/is31fl3736.h b/drivers/led/issi/is31fl3736.h index c956c87f7c..a30be90556 100644 --- a/drivers/led/issi/is31fl3736.h +++ b/drivers/led/issi/is31fl3736.h @@ -1,4 +1,5 @@ /* Copyright 2018 Jason Williams (Wilba) + * Copyright 2021 Doni Crosby * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -60,6 +61,15 @@ void IS31FL3736_mono_set_led_control_register(uint8_t index, bool enabled); void IS31FL3736_update_pwm_buffers(uint8_t addr1, uint8_t addr2); void IS31FL3736_update_led_control_registers(uint8_t addr1, uint8_t addr2); +#define PUR_0R 0x00 // No PUR resistor +#define PUR_05KR 0x01 // 0.5k Ohm resistor +#define PUR_1KR 0x02 // 1.0k Ohm resistor +#define PUR_2KR 0x03 // 2.0k Ohm resistor +#define PUR_4KR 0x04 // 4.0k Ohm resistor +#define PUR_8KR 0x05 // 8.0k Ohm resistor +#define PUR_16KR 0x06 // 16k Ohm resistor +#define PUR_32KR 0x07 // 32k Ohm resistor + #define A_1 0x00 #define A_2 0x02 #define A_3 0x04 diff --git a/drivers/led/issi/is31fl3737.c b/drivers/led/issi/is31fl3737.c index 0bb4ddd425..62862e0d41 100644 --- a/drivers/led/issi/is31fl3737.c +++ b/drivers/led/issi/is31fl3737.c @@ -1,6 +1,7 @@ /* Copyright 2017 Jason Williams * Copyright 2018 Jack Humbert * Copyright 2018 Yiancar + * Copyright 2021 Doni Crosby * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -56,6 +57,14 @@ # define ISSI_PERSISTENCE 0 #endif +#ifndef ISSI_SWPULLUP +# define ISSI_SWPULLUP PUR_0R +#endif + +#ifndef ISSI_CSPULLUP +# define ISSI_CSPULLUP PUR_0R +#endif + // Transfer buffer for TWITransmitData() uint8_t g_twi_transfer_buffer[20]; @@ -143,6 +152,10 @@ void IS31FL3737_init(uint8_t addr) { // Select PG3 IS31FL3737_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION); + // Set de-ghost pull-up resistors (SWx) + IS31FL3737_write_register(addr, ISSI_REG_SWPULLUP, ISSI_SWPULLUP); + // Set de-ghost pull-down resistors (CSx) + IS31FL3737_write_register(addr, ISSI_REG_CSPULLUP, ISSI_CSPULLUP); // Set global current to maximum. IS31FL3737_write_register(addr, ISSI_REG_GLOBALCURRENT, 0xFF); // Disable software shutdown. diff --git a/drivers/led/issi/is31fl3737.h b/drivers/led/issi/is31fl3737.h index 06886e9c9b..97917f1d4f 100644 --- a/drivers/led/issi/is31fl3737.h +++ b/drivers/led/issi/is31fl3737.h @@ -1,6 +1,7 @@ /* Copyright 2017 Jason Williams * Copyright 2018 Jack Humbert * Copyright 2018 Yiancar + * Copyright 2021 Doni Crosby * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -47,6 +48,15 @@ void IS31FL3737_set_led_control_register(uint8_t index, bool red, bool green, bo void IS31FL3737_update_pwm_buffers(uint8_t addr1, uint8_t addr2); void IS31FL3737_update_led_control_registers(uint8_t addr1, uint8_t addr2); +#define PUR_0R 0x00 // No PUR resistor +#define PUR_05KR 0x01 // 0.5k Ohm resistor in t_NOL +#define PUR_1KR 0x02 // 1.0k Ohm resistor in t_NOL +#define PUR_2KR 0x03 // 2.0k Ohm resistor in t_NOL +#define PUR_4KR 0x04 // 4.0k Ohm resistor in t_NOL +#define PUR_8KR 0x05 // 8.0k Ohm resistor in t_NOL +#define PUR_16KR 0x06 // 16k Ohm resistor in t_NOL +#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL + #define A_1 0x00 #define A_2 0x01 #define A_3 0x02 diff --git a/drivers/led/issi/is31fl3741.c b/drivers/led/issi/is31fl3741.c index 24a273514e..5084f3b9fc 100644 --- a/drivers/led/issi/is31fl3741.c +++ b/drivers/led/issi/is31fl3741.c @@ -61,6 +61,14 @@ # define ISSI_PERSISTENCE 0 #endif +#ifndef ISSI_SWPULLUP +# define ISSI_SWPULLUP PUR_32KR +#endif + +#ifndef ISSI_CSPULLUP +# define ISSI_CSPULLUP PUR_32KR +#endif + #define ISSI_MAX_LEDS 351 // Transfer buffer for TWITransmitData() @@ -157,7 +165,7 @@ void IS31FL3741_init(uint8_t addr) { // Set Golbal Current Control Register IS31FL3741_write_register(addr, ISSI_REG_GLOBALCURRENT, 0xFF); // Set Pull up & Down for SWx CSy - IS31FL3741_write_register(addr, ISSI_REG_PULLDOWNUP, 0x77); + IS31FL3741_write_register(addr, ISSI_REG_PULLDOWNUP, ((ISSI_CSPULLUP << 4) | ISSI_SWPULLUP)); // IS31FL3741_update_led_scaling_registers(addr, 0xFF, 0xFF, 0xFF); diff --git a/drivers/led/issi/is31fl3741.h b/drivers/led/issi/is31fl3741.h index 163a035233..563022b9b0 100644 --- a/drivers/led/issi/is31fl3741.h +++ b/drivers/led/issi/is31fl3741.h @@ -51,6 +51,15 @@ void IS31FL3741_set_scaling_registers(const is31_led *pled, uint8_t red, uint8_t void IS31FL3741_set_pwm_buffer(const is31_led *pled, uint8_t red, uint8_t green, uint8_t blue); +#define PUR_0R 0x00 // No PUR resistor +#define PUR_05KR 0x01 // 0.5k Ohm resistor +#define PUR_1KR 0x02 // 1.0k Ohm resistor +#define PUR_2KR 0x03 // 2.0k Ohm resistor +#define PUR_4KR 0x04 // 4.0k Ohm resistor +#define PUR_8KR 0x05 // 8.0k Ohm resistor +#define PUR_16KR 0x06 // 16k Ohm resistor +#define PUR_32KR 0x07 // 32k Ohm resistor + #define CS1_SW1 0x00 #define CS2_SW1 0x01 #define CS3_SW1 0x02 |