summaryrefslogtreecommitdiffstats
path: root/drivers/sensors
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/sensors')
-rw-r--r--drivers/sensors/cirque_pinnacle.c232
-rw-r--r--drivers/sensors/cirque_pinnacle.h62
-rw-r--r--drivers/sensors/cirque_pinnacle_gestures.c227
-rw-r--r--drivers/sensors/cirque_pinnacle_gestures.h107
-rw-r--r--drivers/sensors/cirque_pinnacle_i2c.c4
-rw-r--r--drivers/sensors/cirque_pinnacle_regdefs.h405
-rw-r--r--drivers/sensors/cirque_pinnacle_spi.c4
-rw-r--r--drivers/sensors/paw3204.c172
-rw-r--r--drivers/sensors/paw3204.h68
-rw-r--r--drivers/sensors/pimoroni_trackball.c13
-rw-r--r--drivers/sensors/pimoroni_trackball.h1
-rw-r--r--drivers/sensors/pmw3360.c567
-rw-r--r--drivers/sensors/pmw3360.h134
-rw-r--r--drivers/sensors/pmw3360_firmware.h288
-rw-r--r--drivers/sensors/pmw3389.c580
-rw-r--r--drivers/sensors/pmw3389.h135
-rw-r--r--drivers/sensors/pmw3389_firmware.h307
-rw-r--r--drivers/sensors/pmw33xx_common.c219
-rw-r--r--drivers/sensors/pmw33xx_common.h150
19 files changed, 2249 insertions, 1426 deletions
diff --git a/drivers/sensors/cirque_pinnacle.c b/drivers/sensors/cirque_pinnacle.c
index 2db7f916fe..c50d5a2525 100644
--- a/drivers/sensors/cirque_pinnacle.c
+++ b/drivers/sensors/cirque_pinnacle.c
@@ -1,52 +1,24 @@
// Copyright (c) 2018 Cirque Corp. Restrictions apply. See: www.cirque.com/sw-license
+// based on https://github.com/cirque-corp/Cirque_Pinnacle_1CA027/tree/master/Circular_Trackpad
+// with modifications and changes for QMK
+// refer to documentation: Gen2 and Gen3 (Pinnacle ASIC) at https://www.cirque.com/documentation
+
#include "cirque_pinnacle.h"
#include "print.h"
#include "debug.h"
#include "wait.h"
-
-// Registers for RAP
-// clang-format off
-#define FIRMWARE_ID 0x00
-#define FIRMWARE_VERSION_C 0x01
-#define STATUS_1 0x02
-#define SYSCONFIG_1 0x03
-#define FEEDCONFIG_1 0x04
-#define FEEDCONFIG_2 0x05
-#define CALIBRATION_CONFIG_1 0x07
-#define PS2_AU_CONTROL 0x08
-#define SAMPLE_RATE 0x09
-#define Z_IDLE_COUNT 0x0A
-#define Z_SCALER 0x0B
-#define SLEEP_INTERVAL 0x0C
-#define SLEEP_TIMER 0x0D
-#define PACKET_BYTE_0 0x12
-#define PACKET_BYTE_1 0x13
-#define PACKET_BYTE_2 0x14
-#define PACKET_BYTE_3 0x15
-#define PACKET_BYTE_4 0x16
-#define PACKET_BYTE_5 0x17
-
-#define ERA_VALUE 0x1B
-#define ERA_HIGH_BYTE 0x1C
-#define ERA_LOW_BYTE 0x1D
-#define ERA_CONTROL 0x1E
-
-// ADC-attenuation settings (held in BIT_7 and BIT_6)
-// 1X = most sensitive, 4X = least sensitive
-#define ADC_ATTENUATE_1X 0x00
-#define ADC_ATTENUATE_2X 0x40
-#define ADC_ATTENUATE_3X 0x80
-#define ADC_ATTENUATE_4X 0xC0
-
-// Register config values for this demo
-#define SYSCONFIG_1_VALUE 0x00
-#define FEEDCONFIG_1_VALUE 0x03 // 0x03 for absolute mode 0x01 for relative mode
-#define FEEDCONFIG_2_VALUE 0x1C // 0x1F for normal functionality 0x1E for intellimouse disabled
-#define Z_IDLE_COUNT_VALUE 0x05
-// clang-format on
+#include "timer.h"
+
+#ifndef CIRQUE_PINNACLE_ATTENUATION
+# ifdef CIRQUE_PINNACLE_CURVED_OVERLAY
+# define CIRQUE_PINNACLE_ATTENUATION EXTREG__TRACK_ADCCONFIG__ADC_ATTENUATE_2X
+# else
+# define CIRQUE_PINNACLE_ATTENUATION EXTREG__TRACK_ADCCONFIG__ADC_ATTENUATE_4X
+# endif
+#endif
bool touchpad_init;
-uint16_t scale_data = 1024;
+uint16_t scale_data = CIRQUE_PINNACLE_DEFAULT_SCALE;
void cirque_pinnacle_clear_flags(void);
void cirque_pinnacle_enable_feed(bool feedEnable);
@@ -103,45 +75,45 @@ void cirque_pinnacle_scale_data(pinnacle_data_t* coordinates, uint16_t xResoluti
// Clears Status1 register flags (SW_CC and SW_DR)
void cirque_pinnacle_clear_flags() {
- RAP_Write(STATUS_1, 0x00);
+ RAP_Write(HOSTREG__STATUS1, HOSTREG__STATUS1_DEFVAL & ~(HOSTREG__STATUS1__COMMAND_COMPLETE | HOSTREG__STATUS1__DATA_READY));
wait_us(50);
}
// Enables/Disables the feed
void cirque_pinnacle_enable_feed(bool feedEnable) {
- uint8_t temp;
-
- RAP_ReadBytes(FEEDCONFIG_1, &temp, 1); // Store contents of FeedConfig1 register
+ uint8_t feedconfig1;
+ RAP_ReadBytes(HOSTREG__FEEDCONFIG1, &feedconfig1, 1);
if (feedEnable) {
- temp |= 0x01; // Set Feed Enable bit
- RAP_Write(0x04, temp);
+ feedconfig1 |= HOSTREG__FEEDCONFIG1__FEED_ENABLE;
} else {
- temp &= ~0x01; // Clear Feed Enable bit
- RAP_Write(0x04, temp);
+ feedconfig1 &= ~HOSTREG__FEEDCONFIG1__FEED_ENABLE;
}
+ RAP_Write(HOSTREG__FEEDCONFIG1, feedconfig1);
}
/* ERA (Extended Register Access) Functions */
// Reads <count> bytes from an extended register at <address> (16-bit address),
// stores values in <*data>
void ERA_ReadBytes(uint16_t address, uint8_t* data, uint16_t count) {
- uint8_t ERAControlValue = 0xFF;
+ uint8_t ERAControlValue = 0xFF;
+ uint16_t timeout_timer;
cirque_pinnacle_enable_feed(false); // Disable feed
- RAP_Write(ERA_HIGH_BYTE, (uint8_t)(address >> 8)); // Send upper byte of ERA address
- RAP_Write(ERA_LOW_BYTE, (uint8_t)(address & 0x00FF)); // Send lower byte of ERA address
+ RAP_Write(HOSTREG__EXT_REG_AXS_ADDR_HIGH, (uint8_t)(address >> 8)); // Send upper byte of ERA address
+ RAP_Write(HOSTREG__EXT_REG_AXS_ADDR_LOW, (uint8_t)(address & 0x00FF)); // Send lower byte of ERA address
for (uint16_t i = 0; i < count; i++) {
- RAP_Write(ERA_CONTROL, 0x05); // Signal ERA-read (auto-increment) to Pinnacle
+ RAP_Write(HOSTREG__EXT_REG_AXS_CTRL, HOSTREG__EREG_AXS__INC_ADDR_READ | HOSTREG__EREG_AXS__READ); // Signal ERA-read (auto-increment) to Pinnacle
// Wait for status register 0x1E to clear
+ timeout_timer = timer_read();
do {
- RAP_ReadBytes(ERA_CONTROL, &ERAControlValue, 1);
- } while (ERAControlValue != 0x00);
+ RAP_ReadBytes(HOSTREG__EXT_REG_AXS_CTRL, &ERAControlValue, 1);
+ } while ((ERAControlValue != 0x00) && (timer_elapsed(timeout_timer) <= CIRQUE_PINNACLE_TIMEOUT));
- RAP_ReadBytes(ERA_VALUE, data + i, 1);
+ RAP_ReadBytes(HOSTREG__EXT_REG_AXS_VALUE, data + i, 1);
cirque_pinnacle_clear_flags();
}
@@ -149,49 +121,83 @@ void ERA_ReadBytes(uint16_t address, uint8_t* data, uint16_t count) {
// Writes a byte, <data>, to an extended register at <address> (16-bit address)
void ERA_WriteByte(uint16_t address, uint8_t data) {
- uint8_t ERAControlValue = 0xFF;
+ uint8_t ERAControlValue = 0xFF;
+ uint16_t timeout_timer;
cirque_pinnacle_enable_feed(false); // Disable feed
- RAP_Write(ERA_VALUE, data); // Send data byte to be written
+ RAP_Write(HOSTREG__EXT_REG_AXS_VALUE, data); // Send data byte to be written
- RAP_Write(ERA_HIGH_BYTE, (uint8_t)(address >> 8)); // Upper byte of ERA address
- RAP_Write(ERA_LOW_BYTE, (uint8_t)(address & 0x00FF)); // Lower byte of ERA address
+ RAP_Write(HOSTREG__EXT_REG_AXS_ADDR_HIGH, (uint8_t)(address >> 8)); // Upper byte of ERA address
+ RAP_Write(HOSTREG__EXT_REG_AXS_ADDR_LOW, (uint8_t)(address & 0x00FF)); // Lower byte of ERA address
- RAP_Write(ERA_CONTROL, 0x02); // Signal an ERA-write to Pinnacle
+ RAP_Write(HOSTREG__EXT_REG_AXS_CTRL, HOSTREG__EREG_AXS__WRITE); // Signal an ERA-write to Pinnacle
// Wait for status register 0x1E to clear
+ timeout_timer = timer_read();
do {
- RAP_ReadBytes(ERA_CONTROL, &ERAControlValue, 1);
- } while (ERAControlValue != 0x00);
+ RAP_ReadBytes(HOSTREG__EXT_REG_AXS_CTRL, &ERAControlValue, 1);
+ } while ((ERAControlValue != 0x00) && (timer_elapsed(timeout_timer) <= CIRQUE_PINNACLE_TIMEOUT));
cirque_pinnacle_clear_flags();
}
void cirque_pinnacle_set_adc_attenuation(uint8_t adcGain) {
- uint8_t temp = 0x00;
+ uint8_t adcconfig = 0x00;
- ERA_ReadBytes(0x0187, &temp, 1);
- temp &= 0x3F; // clear top two bits
- temp |= adcGain;
- ERA_WriteByte(0x0187, temp);
- ERA_ReadBytes(0x0187, &temp, 1);
+ ERA_ReadBytes(EXTREG__TRACK_ADCCONFIG, &adcconfig, 1);
+ adcconfig &= EXTREG__TRACK_ADCCONFIG__ADC_ATTENUATE_MASK;
+ adcconfig |= adcGain;
+ ERA_WriteByte(EXTREG__TRACK_ADCCONFIG, adcconfig);
+ ERA_ReadBytes(EXTREG__TRACK_ADCCONFIG, &adcconfig, 1);
}
// Changes thresholds to improve detection of fingers
+// Not needed for flat overlay?
void cirque_pinnacle_tune_edge_sensitivity(void) {
- uint8_t temp = 0x00;
+ uint8_t widezmin = 0x00;
- ERA_ReadBytes(0x0149, &temp, 1);
- ERA_WriteByte(0x0149, 0x04);
- ERA_ReadBytes(0x0149, &temp, 1);
+ ERA_ReadBytes(EXTREG__XAXIS_WIDEZMIN, &widezmin, 1);
+ ERA_WriteByte(EXTREG__XAXIS_WIDEZMIN, 0x04); // magic number from Cirque sample code
+ ERA_ReadBytes(EXTREG__XAXIS_WIDEZMIN, &widezmin, 1);
- ERA_ReadBytes(0x0168, &temp, 1);
- ERA_WriteByte(0x0168, 0x03);
- ERA_ReadBytes(0x0168, &temp, 1);
+ ERA_ReadBytes(EXTREG__YAXIS_WIDEZMIN, &widezmin, 1);
+ ERA_WriteByte(EXTREG__YAXIS_WIDEZMIN, 0x03); // magic number from Cirque sample code
+ ERA_ReadBytes(EXTREG__YAXIS_WIDEZMIN, &widezmin, 1);
}
-/* Pinnacle-based TM040040 Functions */
+// Perform calibration
+void cirque_pinnacle_calibrate(void) {
+ uint8_t calconfig;
+ uint16_t timeout_timer;
+
+ RAP_ReadBytes(HOSTREG__CALCONFIG1, &calconfig, 1);
+ calconfig |= HOSTREG__CALCONFIG1__CALIBRATE;
+ RAP_Write(HOSTREG__CALCONFIG1, calconfig);
+
+ // Calibration takes ~100ms according to GT-AN-090624, doubling the timeout just to be safe
+ timeout_timer = timer_read();
+ do {
+ RAP_ReadBytes(HOSTREG__CALCONFIG1, &calconfig, 1);
+ } while ((calconfig & HOSTREG__CALCONFIG1__CALIBRATE) && (timer_elapsed(timeout_timer) <= 200));
+
+ cirque_pinnacle_clear_flags();
+}
+
+// Enable/disable cursor smoothing, smoothing is enabled by default
+void cirque_pinnacle_cursor_smoothing(bool enable) {
+ uint8_t feedconfig3;
+
+ RAP_ReadBytes(HOSTREG__FEEDCONFIG3, &feedconfig3, 1);
+ if (enable) {
+ feedconfig3 &= ~HOSTREG__FEEDCONFIG3__DISABLE_CROSS_RATE_SMOOTHING;
+ } else {
+ feedconfig3 |= HOSTREG__FEEDCONFIG3__DISABLE_CROSS_RATE_SMOOTHING;
+ }
+ RAP_Write(HOSTREG__FEEDCONFIG3, feedconfig3);
+}
+
+/* Pinnacle-based TM040040/TM035035/TM023023 Functions */
void cirque_pinnacle_init(void) {
#if defined(POINTING_DEVICE_DRIVER_cirque_pinnacle_spi)
spi_init();
@@ -200,39 +206,71 @@ void cirque_pinnacle_init(void) {
#endif
touchpad_init = true;
+
// Host clears SW_CC flag
cirque_pinnacle_clear_flags();
- // Host configures bits of registers 0x03 and 0x05
- RAP_Write(SYSCONFIG_1, SYSCONFIG_1_VALUE);
- RAP_Write(FEEDCONFIG_2, FEEDCONFIG_2_VALUE);
+ // send a RESET command now, in case QMK had a soft-reset without a power cycle
+ RAP_Write(HOSTREG__SYSCONFIG1, HOSTREG__SYSCONFIG1__RESET);
+ wait_ms(30); // Pinnacle needs 10-15ms to boot, so wait long enough before configuring
+ RAP_Write(HOSTREG__SYSCONFIG1, HOSTREG__SYSCONFIG1_DEFVAL);
+ wait_us(50);
+
+ // FeedConfig2 (Feature flags for Relative Mode Only)
+ RAP_Write(HOSTREG__FEEDCONFIG2, HOSTREG__FEEDCONFIG2_DEFVAL);
- // Host enables preferred output mode (absolute)
- RAP_Write(FEEDCONFIG_1, FEEDCONFIG_1_VALUE);
+ // FeedConfig1 (Data Output Flags)
+ RAP_Write(HOSTREG__FEEDCONFIG1, CIRQUE_PINNACLE_POSITION_MODE ? HOSTREG__FEEDCONFIG1__DATA_TYPE__REL0_ABS1 : HOSTREG__FEEDCONFIG1_DEFVAL);
- // Host sets z-idle packet count to 5 (default is 30)
- RAP_Write(Z_IDLE_COUNT, Z_IDLE_COUNT_VALUE);
+ // Host sets z-idle packet count to 5 (default is 0x1E/30)
+ RAP_Write(HOSTREG__ZIDLE, 5);
- cirque_pinnacle_set_adc_attenuation(0xFF);
+ cirque_pinnacle_set_adc_attenuation(CIRQUE_PINNACLE_ATTENUATION);
+#ifdef CIRQUE_PINNACLE_CURVED_OVERLAY
cirque_pinnacle_tune_edge_sensitivity();
+#endif
+ // Force a calibration after setting ADC attenuation
+ cirque_pinnacle_calibrate();
+
cirque_pinnacle_enable_feed(true);
}
-// Reads XYZ data from Pinnacle registers 0x14 through 0x17
-// Stores result in pinnacle_data_t struct with xValue, yValue, and zValue members
pinnacle_data_t cirque_pinnacle_read_data(void) {
- uint8_t data[6] = {0};
- pinnacle_data_t result = {0};
- RAP_ReadBytes(PACKET_BYTE_0, data, 6);
+ uint8_t data_ready = 0;
+ uint8_t data[6] = {0};
+ pinnacle_data_t result = {0};
+
+ // Check if there is valid data available
+ RAP_ReadBytes(HOSTREG__STATUS1, &data_ready, 1);
+ if ((data_ready & HOSTREG__STATUS1__DATA_READY) == 0) {
+ // no data available yet
+ result.valid = false; // be explicit
+ return result;
+ }
- cirque_pinnacle_clear_flags();
+ // Read all data bytes
+ RAP_ReadBytes(HOSTREG__PACKETBYTE_0, data, 6);
- result.buttonFlags = data[0] & 0x3F;
- result.xValue = data[2] | ((data[4] & 0x0F) << 8);
- result.yValue = data[3] | ((data[4] & 0xF0) << 4);
- result.zValue = data[5] & 0x3F;
+ // Get ready for the next data sample
+ cirque_pinnacle_clear_flags();
- result.touchDown = (result.xValue != 0 || result.yValue != 0);
+#if CIRQUE_PINNACLE_POSITION_MODE
+ // Decode data for absolute mode
+ // Register 0x13 is unused in this mode (palm detection area)
+ result.buttonFlags = data[0] & 0x3F; // bit0 to bit5 are switch 0-5, only hardware button presses (from input pin on the Pinnacle chip)
+ result.xValue = data[2] | ((data[4] & 0x0F) << 8); // merge high and low bits for X
+ result.yValue = data[3] | ((data[4] & 0xF0) << 4); // merge high and low bits for Y
+ result.zValue = data[5] & 0x3F; // Z is only lower 6 bits, upper 2 bits are reserved/unused
+ result.touchDown = (result.xValue != 0 || result.yValue != 0); // (0,0) is a "magic coordinate" to indicate "finger touched down"
+#else
+ // Decode data for relative mode
+ // Registers 0x16 and 0x17 are unused in this mode
+ result.buttons = data[0] & 0x07; // bit0 = primary button, bit1 = secondary button, bit2 = auxilary button, if Taps enabled then also software-recognized taps are reported
+ result.xDelta = data[1];
+ result.yDelta = data[2];
+ result.wheelCount = data[3];
+#endif
+ result.valid = true;
return result;
}
diff --git a/drivers/sensors/cirque_pinnacle.h b/drivers/sensors/cirque_pinnacle.h
index c8cb360e03..1c9bf06fd3 100644
--- a/drivers/sensors/cirque_pinnacle.h
+++ b/drivers/sensors/cirque_pinnacle.h
@@ -2,26 +2,23 @@
#pragma once
+#include "cirque_pinnacle_regdefs.h"
#include <stdint.h>
#include <stdbool.h>
-// Convenient way to store and access measurements
-typedef struct {
- uint16_t xValue;
- uint16_t yValue;
- uint16_t zValue;
- uint8_t buttonFlags;
- bool touchDown;
-} pinnacle_data_t;
+#ifndef CIRQUE_PINNACLE_TIMEOUT
+# define CIRQUE_PINNACLE_TIMEOUT 20 // I2C timeout in milliseconds
+#endif
-void cirque_pinnacle_init(void);
-pinnacle_data_t cirque_pinnacle_read_data(void);
-void cirque_pinnacle_scale_data(pinnacle_data_t* coordinates, uint16_t xResolution, uint16_t yResolution);
-uint16_t cirque_pinnacle_get_scale(void);
-void cirque_pinnacle_set_scale(uint16_t scale);
+#define CIRQUE_PINNACLE_ABSOLUTE_MODE 1
+#define CIRQUE_PINNACLE_RELATIVE_MODE 0
+#ifndef CIRQUE_PINNACLE_POSITION_MODE
+# define CIRQUE_PINNACLE_POSITION_MODE CIRQUE_PINNACLE_ABSOLUTE_MODE
+#endif
-#ifndef CIRQUE_PINNACLE_TIMEOUT
-# define CIRQUE_PINNACLE_TIMEOUT 20
+#define CIRQUE_PINNACLE_DEFAULT_SCALE 1024
+#ifndef CIRQUE_PINNACLE_DIAMETER_MM
+# define CIRQUE_PINNACLE_DIAMETER_MM 40
#endif
// Coordinate scaling values
@@ -43,12 +40,14 @@ void cirque_pinnacle_set_scale(uint16_t scale);
#ifndef CIRQUE_PINNACLE_Y_RANGE
# define CIRQUE_PINNACLE_Y_RANGE (CIRQUE_PINNACLE_Y_UPPER - CIRQUE_PINNACLE_Y_LOWER)
#endif
-
+#if !defined(POINTING_DEVICE_TASK_THROTTLE_MS)
+# define POINTING_DEVICE_TASK_THROTTLE_MS 10 // Cirque Pinnacle in normal operation produces data every 10ms. Advanced configuration for pen/stylus usage might require lower values.
+#endif
#if defined(POINTING_DEVICE_DRIVER_cirque_pinnacle_i2c)
# include "i2c_master.h"
// Cirque's 7-bit I2C Slave Address
# ifndef CIRQUE_PINNACLE_ADDR
-# define CIRQUE_PINNACLE_ADDR 0x2A
+# define CIRQUE_PINNACLE_ADDR I2C_ADDRESS_DEFAULT
# endif
#elif defined(POINTING_DEVICE_DRIVER_cirque_pinnacle_spi)
# include "spi_master.h"
@@ -72,3 +71,32 @@ void cirque_pinnacle_set_scale(uint16_t scale);
# endif
# endif
#endif
+
+#define DIVIDE_UNSIGNED_ROUND(numerator, denominator) (((numerator) + ((denominator) / 2)) / (denominator))
+#define CIRQUE_PINNACLE_INCH_TO_PX(inch) (DIVIDE_UNSIGNED_ROUND((inch) * (uint32_t)CIRQUE_PINNACLE_DIAMETER_MM * 10, 254))
+#define CIRQUE_PINNACLE_PX_TO_INCH(px) (DIVIDE_UNSIGNED_ROUND((px) * (uint32_t)254, CIRQUE_PINNACLE_DIAMETER_MM * 10))
+
+// Convenient way to store and access measurements
+typedef struct {
+ bool valid; // true if valid data was read, false if no data was ready
+#if CIRQUE_PINNACLE_POSITION_MODE
+ uint16_t xValue;
+ uint16_t yValue;
+ uint16_t zValue;
+ uint8_t buttonFlags;
+ bool touchDown;
+#else
+ uint8_t xDelta;
+ uint8_t yDelta;
+ uint8_t wheelCount;
+ uint8_t buttons;
+#endif
+} pinnacle_data_t;
+
+void cirque_pinnacle_init(void);
+void cirque_pinnacle_calibrate(void);
+void cirque_pinnacle_cursor_smoothing(bool enable);
+pinnacle_data_t cirque_pinnacle_read_data(void);
+void cirque_pinnacle_scale_data(pinnacle_data_t* coordinates, uint16_t xResolution, uint16_t yResolution);
+uint16_t cirque_pinnacle_get_scale(void);
+void cirque_pinnacle_set_scale(uint16_t scale);
diff --git a/drivers/sensors/cirque_pinnacle_gestures.c b/drivers/sensors/cirque_pinnacle_gestures.c
new file mode 100644
index 0000000000..70f16527ba
--- /dev/null
+++ b/drivers/sensors/cirque_pinnacle_gestures.c
@@ -0,0 +1,227 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com>
+ * Copyright 2022 Daniel Kao <daniel.m.kao@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <stdlib.h>
+#include <lib/lib8tion/lib8tion.h>
+#include "cirque_pinnacle_gestures.h"
+#include "pointing_device.h"
+#include "timer.h"
+#include "wait.h"
+
+#if defined(CIRQUE_PINNACLE_TAP_ENABLE) || defined(CIRQUE_PINNACLE_CIRCULAR_SCROLL_ENABLE)
+static cirque_pinnacle_features_t features = {.tap_enable = true, .circular_scroll_enable = true};
+#endif
+
+#ifdef CIRQUE_PINNACLE_TAP_ENABLE
+static trackpad_tap_context_t tap;
+
+static report_mouse_t trackpad_tap(report_mouse_t mouse_report, pinnacle_data_t touchData) {
+ if (touchData.touchDown != tap.touchDown) {
+ tap.touchDown = touchData.touchDown;
+ if (!touchData.zValue) {
+ if (timer_elapsed(tap.timer) < CIRQUE_PINNACLE_TAPPING_TERM && tap.timer != 0) {
+ mouse_report.buttons = pointing_device_handle_buttons(mouse_report.buttons, true, POINTING_DEVICE_BUTTON1);
+ pointing_device_set_report(mouse_report);
+ pointing_device_send();
+# if TAP_CODE_DELAY > 0
+ wait_ms(TAP_CODE_DELAY);
+# endif
+ mouse_report.buttons = pointing_device_handle_buttons(mouse_report.buttons, false, POINTING_DEVICE_BUTTON1);
+ pointing_device_set_report(mouse_report);
+ pointing_device_send();
+ }
+ }
+ tap.timer = timer_read();
+ }
+ if (timer_elapsed(tap.timer) > (CIRQUE_PINNACLE_TOUCH_DEBOUNCE)) {
+ tap.timer = 0;
+ }
+
+ return mouse_report;
+}
+
+void cirque_pinnacle_enable_tap(bool enable) {
+ features.tap_enable = enable;
+}
+#endif
+
+#ifdef CIRQUE_PINNACLE_CIRCULAR_SCROLL_ENABLE
+/* To set a trackpad exclusively as scroll wheel: outer_ring_pct = 100, trigger_px = 0, trigger_ang = 0 */
+static circular_scroll_context_t scroll = {.config = {.outer_ring_pct = 33,
+ .trigger_px = 16,
+ .trigger_ang = 9102, /* 50 degrees */
+ .wheel_clicks = 18}};
+
+static inline uint16_t atan2_16(int32_t dy, int32_t dx) {
+ if (dy == 0) {
+ if (dx >= 0) {
+ return 0;
+ } else {
+ return 32768;
+ }
+ }
+
+ int32_t abs_y = dy > 0 ? dy : -dy;
+ int16_t a;
+
+ if (dx >= 0) {
+ a = 8192 - (8192 * (dx - abs_y) / (dx + abs_y));
+ } else {
+ a = 24576 - (8192 * (dx + abs_y) / (abs_y - dx));
+ }
+
+ if (dy < 0) {
+ return -a; // negate if in quad III or IV
+ }
+ return a;
+}
+
+static circular_scroll_t circular_scroll(pinnacle_data_t touchData) {
+ circular_scroll_t report = {0, 0, false};
+ int8_t x, y, wheel_clicks;
+ uint8_t center = 256 / 2, mag;
+ int16_t ang, dot, det, opposite_side, adjacent_side;
+ uint16_t scale = cirque_pinnacle_get_scale();
+
+ if (touchData.zValue) {
+ /*
+ * Place origin at center of trackpad, treat coordinates as vectors.
+ * Scale to fixed int8_t size; angles are independent of resolution.
+ */
+ if (scale) {
+ x = (int8_t)((int32_t)touchData.xValue * 256 / scale - center);
+ y = (int8_t)((int32_t)touchData.yValue * 256 / scale - center);
+ } else {
+ x = 0;
+ y = 0;
+ }
+
+ /* Check if first touch */
+ if (!scroll.z) {
+ report.suppress_touch = false;
+ /* Check if touch falls within outer ring */
+ mag = sqrt16(x * x + y * y);
+ if (mag * 100 / center >= 100 - scroll.config.outer_ring_pct) {
+ scroll.state = SCROLL_DETECTING;
+ scroll.x = x;
+ scroll.y = y;
+ scroll.mag = mag;
+ /*
+ * Decide scroll axis:
+ * Vertical if started from righ half
+ * Horizontal if started from left half
+ * Flipped for left-handed
+ */
+# if defined(POINTING_DEVICE_ROTATION_90)
+ scroll.axis = y < 0;
+# elif defined(POINTING_DEVICE_ROTATION_180)
+ scroll.axis = x > 0;
+# elif defined(POINTING_DEVICE_ROTATION_270)
+ scroll.axis = y > 0;
+# else
+ scroll.axis = x < 0;
+# endif
+ }
+ } else if (scroll.state == SCROLL_DETECTING) {
+ report.suppress_touch = true;
+ /* Already detecting scroll, check movement from touchdown location */
+ mag = sqrt16((x - scroll.x) * (x - scroll.x) + (y - scroll.y) * (y - scroll.y));
+ if (mag >= scroll.config.trigger_px) {
+ /*
+ * Find angle of movement.
+ * 0 degrees here means movement towards center of circle
+ */
+ dot = scroll.x * x + scroll.y * y;
+ det = scroll.x * y - scroll.y * x;
+ opposite_side = abs(det); /* Based on scalar rejection */
+ adjacent_side = abs(scroll.mag * scroll.mag - abs(dot)); /* Based on scalar projection */
+ ang = (int16_t)atan2_16(opposite_side, adjacent_side);
+ if (ang < scroll.config.trigger_ang) {
+ /* Not a scroll, release coordinates */
+ report.suppress_touch = false;
+ scroll.state = NOT_SCROLL;
+ } else {
+ /* Scroll detected */
+ scroll.state = SCROLL_VALID;
+ }
+ }
+ }
+ if (scroll.state == SCROLL_VALID) {
+ report.suppress_touch = true;
+ dot = scroll.x * x + scroll.y * y;
+ det = scroll.x * y - scroll.y * x;
+ ang = (int16_t)atan2_16(det, dot);
+ wheel_clicks = ((int32_t)ang * scroll.config.wheel_clicks) / 65536;
+ if (wheel_clicks >= 1 || wheel_clicks <= -1) {
+ if (scroll.config.left_handed) {
+ if (scroll.axis == 0) {
+ report.h = -wheel_clicks;
+ } else {
+ report.v = wheel_clicks;
+ }
+ } else {
+ if (scroll.axis == 0) {
+ report.v = -wheel_clicks;
+ } else {
+ report.h = wheel_clicks;
+ }
+ }
+ scroll.x = x;
+ scroll.y = y;
+ }
+ }
+ }
+
+ scroll.z = touchData.zValue;
+ if (!scroll.z) scroll.state = SCROLL_UNINITIALIZED;
+
+ return report;
+}
+
+void cirque_pinnacle_enable_circular_scroll(bool enable) {
+ features.circular_scroll_enable = enable;
+}
+
+void cirque_pinnacle_configure_circular_scroll(uint8_t outer_ring_pct, uint8_t trigger_px, uint16_t trigger_ang, uint8_t wheel_clicks, bool left_handed) {
+ scroll.config.outer_ring_pct = outer_ring_pct;
+ scroll.config.trigger_px = trigger_px;
+ scroll.config.trigger_ang = trigger_ang;
+ scroll.config.wheel_clicks = wheel_clicks;
+ scroll.config.left_handed = left_handed;
+}
+#endif
+
+bool cirque_pinnacle_gestures(report_mouse_t* mouse_report, pinnacle_data_t touchData) {
+ bool suppress_mouse_update = false;
+
+#ifdef CIRQUE_PINNACLE_CIRCULAR_SCROLL_ENABLE
+ circular_scroll_t scroll_report;
+ if (features.circular_scroll_enable) {
+ scroll_report = circular_scroll(touchData);
+ mouse_report->v = scroll_report.v;
+ mouse_report->h = scroll_report.h;
+ suppress_mouse_update = scroll_report.suppress_touch;
+ }
+#endif
+
+#ifdef CIRQUE_PINNACLE_TAP_ENABLE
+ if (features.tap_enable) {
+ *mouse_report = trackpad_tap(*mouse_report, touchData);
+ }
+#endif
+
+ return suppress_mouse_update;
+}
diff --git a/drivers/sensors/cirque_pinnacle_gestures.h b/drivers/sensors/cirque_pinnacle_gestures.h
new file mode 100644
index 0000000000..f39782b467
--- /dev/null
+++ b/drivers/sensors/cirque_pinnacle_gestures.h
@@ -0,0 +1,107 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com>
+ * Copyright 2022 Daniel Kao <daniel.m.kao@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "cirque_pinnacle.h"
+#include "report.h"
+
+typedef struct {
+ bool tap_enable;
+ bool circular_scroll_enable;
+} cirque_pinnacle_features_t;
+
+#ifdef CIRQUE_PINNACLE_TAP_ENABLE
+# ifndef CIRQUE_PINNACLE_TAPPING_TERM
+# include "action.h"
+# include "action_tapping.h"
+# define CIRQUE_PINNACLE_TAPPING_TERM GET_TAPPING_TERM(KC_BTN1, &(keyrecord_t){})
+# endif
+# ifndef CIRQUE_PINNACLE_TOUCH_DEBOUNCE
+# define CIRQUE_PINNACLE_TOUCH_DEBOUNCE (CIRQUE_PINNACLE_TAPPING_TERM * 8)
+# endif
+
+typedef struct {
+ uint16_t timer;
+ bool touchDown;
+} trackpad_tap_context_t;
+
+/* Enable/disable tap gesture */
+void cirque_pinnacle_enable_tap(bool enable);
+#endif
+
+#ifdef CIRQUE_PINNACLE_CIRCULAR_SCROLL_ENABLE
+typedef enum {
+ SCROLL_UNINITIALIZED,
+ SCROLL_DETECTING,
+ SCROLL_VALID,
+ NOT_SCROLL,
+} circular_scroll_status_t;
+
+typedef struct {
+ int8_t v;
+ int8_t h;
+ bool suppress_touch;
+} circular_scroll_t;
+
+typedef struct {
+ uint8_t outer_ring_pct; /* Width of outer ring, given as a percentage of the radius */
+ uint8_t trigger_px; /* Amount of movement before triggering scroll validation, in pixels 0~127 */
+ uint16_t trigger_ang; /* Angle required to validate scroll, in radians where pi = 32768 */
+ uint8_t wheel_clicks; /* How many clicks to report in a circle */
+ bool left_handed; /* Whether scrolling should be flipped for left handed use */
+} circular_scroll_config_t;
+
+typedef struct {
+ circular_scroll_config_t config;
+ circular_scroll_status_t state;
+ uint8_t mag;
+ int8_t x;
+ int8_t y;
+ uint16_t z;
+ bool axis;
+} circular_scroll_context_t;
+
+/* Enable/disable circular scroll gesture */
+void cirque_pinnacle_enable_circular_scroll(bool enable);
+
+/*
+ * Configure circular scroll gesture.
+ * Trackpad can be configured to act exclusively as a scroll wheel with outer_ring_pct = 0, trigger_px = 0, trigger_ang = 0.
+ * @param outer_ring_pct Width of outer ring from which to begin scroll validation, given as a percentage of the radius.
+ * @param trigger_px Amount of movement before triggering scroll validation. Expressed in pixels, trackpad coordinates are scaled to radius of 128 pixels for circular scroll.
+ * @param triger_ang Angle required to validate scroll, angle smaller than this will invalidate scroll. In radians where pi = 32768, 0 means movement towards center of trackpad, 16384 means movement perpendicular to center.
+ * @param wheel_clicks Number of scroll wheel clicks to report in a full rotation.
+ * @param left_handed Whether scrolling should be flipped for left-handed use.
+ */
+void cirque_pinnacle_configure_circular_scroll(uint8_t outer_ring_pct, uint8_t trigger_px, uint16_t trigger_ang, uint8_t wheel_clicks, bool left_handed);
+#endif
+
+#ifdef POINTING_DEVICE_GESTURES_CURSOR_GLIDE_ENABLE
+/* Implementation in pointing_device_drivers.c */
+
+/* Enable/disable inertial cursor */
+void cirque_pinnacle_enable_cursor_glide(bool enable);
+
+/*
+ * Configure inertial cursor.
+ * @param trigger_px Movement required to trigger cursor glide, set this to non-zero if you have some amount of hover.
+ */
+void cirque_pinnacle_configure_cursor_glide(float trigger_px);
+#endif
+
+/* Process available gestures */
+bool cirque_pinnacle_gestures(report_mouse_t* mouse_report, pinnacle_data_t touchData);
diff --git a/drivers/sensors/cirque_pinnacle_i2c.c b/drivers/sensors/cirque_pinnacle_i2c.c
index 8a38f1dcea..b328dd9a7a 100644
--- a/drivers/sensors/cirque_pinnacle_i2c.c
+++ b/drivers/sensors/cirque_pinnacle_i2c.c
@@ -19,7 +19,7 @@ void RAP_ReadBytes(uint8_t address, uint8_t* data, uint8_t count) {
i2c_writeReg(CIRQUE_PINNACLE_ADDR << 1, cmdByte, NULL, 0, CIRQUE_PINNACLE_TIMEOUT);
if (i2c_readReg(CIRQUE_PINNACLE_ADDR << 1, cmdByte, data, count, CIRQUE_PINNACLE_TIMEOUT) != I2C_STATUS_SUCCESS) {
#ifdef CONSOLE_ENABLE
- dprintf("error right touchpad\n");
+ dprintf("error cirque_pinnacle i2c_readReg\n");
#endif
touchpad_init = false;
}
@@ -34,7 +34,7 @@ void RAP_Write(uint8_t address, uint8_t data) {
if (touchpad_init) {
if (i2c_writeReg(CIRQUE_PINNACLE_ADDR << 1, cmdByte, &data, sizeof(data), CIRQUE_PINNACLE_TIMEOUT) != I2C_STATUS_SUCCESS) {
#ifdef CONSOLE_ENABLE
- dprintf("error right touchpad\n");
+ dprintf("error cirque_pinnacle i2c_writeReg\n");
#endif
touchpad_init = false;
}
diff --git a/drivers/sensors/cirque_pinnacle_regdefs.h b/drivers/sensors/cirque_pinnacle_regdefs.h
new file mode 100644
index 0000000000..993da1e757
--- /dev/null
+++ b/drivers/sensors/cirque_pinnacle_regdefs.h
@@ -0,0 +1,405 @@
+// Copyright (c) 2018 Cirque Corp. Restrictions apply. See: www.cirque.com/sw-license
+// based on https://github.com/cirque-corp/Cirque_Pinnacle_1CA027/tree/master/Additional_Examples
+// with modifications and changes for QMK
+// refer to docum