summaryrefslogtreecommitdiffstats
path: root/drivers/sensors/cirque_pinnacle.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/sensors/cirque_pinnacle.c')
-rw-r--r--drivers/sensors/cirque_pinnacle.c105
1 files changed, 77 insertions, 28 deletions
diff --git a/drivers/sensors/cirque_pinnacle.c b/drivers/sensors/cirque_pinnacle.c
index 2db7f916fe..1d1e4ccfc6 100644
--- a/drivers/sensors/cirque_pinnacle.c
+++ b/drivers/sensors/cirque_pinnacle.c
@@ -1,8 +1,13 @@
// Copyright (c) 2018 Cirque Corp. Restrictions apply. See: www.cirque.com/sw-license
+// based on https://github.com/cirque-corp/Cirque_Pinnacle_1CA027/tree/master/Circular_Trackpad
+// with modifications and changes for QMK
+// refer to documentation: Gen2 and Gen3 (Pinnacle ASIC) at https://www.cirque.com/documentation
+
#include "cirque_pinnacle.h"
#include "print.h"
#include "debug.h"
#include "wait.h"
+#include "timer.h"
// Registers for RAP
// clang-format off
@@ -38,11 +43,9 @@
#define ADC_ATTENUATE_3X 0x80
#define ADC_ATTENUATE_4X 0xC0
-// Register config values for this demo
-#define SYSCONFIG_1_VALUE 0x00
-#define FEEDCONFIG_1_VALUE 0x03 // 0x03 for absolute mode 0x01 for relative mode
-#define FEEDCONFIG_2_VALUE 0x1C // 0x1F for normal functionality 0x1E for intellimouse disabled
-#define Z_IDLE_COUNT_VALUE 0x05
+#ifndef CIRQUE_PINNACLE_ATTENUATION
+# define CIRQUE_PINNACLE_ATTENUATION ADC_ATTENUATE_4X
+#endif
// clang-format on
bool touchpad_init;
@@ -110,16 +113,14 @@ void cirque_pinnacle_clear_flags() {
// Enables/Disables the feed
void cirque_pinnacle_enable_feed(bool feedEnable) {
uint8_t temp;
-
RAP_ReadBytes(FEEDCONFIG_1, &temp, 1); // Store contents of FeedConfig1 register
if (feedEnable) {
temp |= 0x01; // Set Feed Enable bit
- RAP_Write(0x04, temp);
} else {
temp &= ~0x01; // Clear Feed Enable bit
- RAP_Write(0x04, temp);
}
+ RAP_Write(FEEDCONFIG_1, temp);
}
/* ERA (Extended Register Access) Functions */
@@ -191,7 +192,7 @@ void cirque_pinnacle_tune_edge_sensitivity(void) {
ERA_ReadBytes(0x0168, &temp, 1);
}
-/* Pinnacle-based TM040040 Functions */
+/* Pinnacle-based TM040040/TM035035/TM023023 Functions */
void cirque_pinnacle_init(void) {
#if defined(POINTING_DEVICE_DRIVER_cirque_pinnacle_spi)
spi_init();
@@ -200,39 +201,87 @@ void cirque_pinnacle_init(void) {
#endif
touchpad_init = true;
+
// Host clears SW_CC flag
cirque_pinnacle_clear_flags();
- // Host configures bits of registers 0x03 and 0x05
- RAP_Write(SYSCONFIG_1, SYSCONFIG_1_VALUE);
- RAP_Write(FEEDCONFIG_2, FEEDCONFIG_2_VALUE);
-
- // Host enables preferred output mode (absolute)
- RAP_Write(FEEDCONFIG_1, FEEDCONFIG_1_VALUE);
+ // SysConfig1 (Low Power Mode)
+ // Bit 0: Reset, 1=Reset
+ // Bit 1: Shutdown, 1=Shutdown, 0=Active
+ // Bit 2: Sleep Enable, 1=low power mode, 0=normal mode
+ // send a RESET command now, in case QMK had a soft-reset without a power cycle
+ RAP_Write(SYSCONFIG_1, 0x01);
+ wait_ms(30); // Pinnacle needs 10-15ms to boot, so wait long enough before configuring
+ RAP_Write(SYSCONFIG_1, 0x00);
+ wait_us(50);
- // Host sets z-idle packet count to 5 (default is 30)
- RAP_Write(Z_IDLE_COUNT, Z_IDLE_COUNT_VALUE);
+ // FeedConfig2 (Feature flags for Relative Mode Only)
+ // Bit 0: IntelliMouse Enable, 1=enable, 0=disable
+ // Bit 1: All Taps Disable, 1=disable, 0=enable
+ // Bit 2: Secondary Tap Disable, 1=disable, 0=enable
+ // Bit 3: Scroll Disable, 1=disable, 0=enable
+ // Bit 4: GlideExtend® Disable, 1=disable, 0=enable
+ // Bit 5: reserved
+ // Bit 6: reserved
+ // Bit 7: Swap X & Y, 1=90° rotation, 0=0° rotation
+ RAP_Write(FEEDCONFIG_2, 0x00);
+
+ // FeedConfig1 (Data Output Flags)
+ // Bit 0: Feed enable, 1=feed, 0=no feed
+ // Bit 1: Data mode, 1=absolute, 0=relative
+ // Bit 2: Filter disable, 1=no filter, 0=filter
+ // Bit 3: X disable, 1=no X data, 0=X data
+ // Bit 4: Y disable, 1=no Y data, 0=Y data
+ // Bit 5: reserved
+ // Bit 6: X data Invert, 1=X max to 0, 0=0 to Y max
+ // Bit 7: Y data Invert, 1=Y max to 0, 0=0 to Y max
+ RAP_Write(FEEDCONFIG_1, CIRQUE_PINNACLE_POSITION_MODE << 1);
+
+ // Host sets z-idle packet count to 5 (default is 0x1F/30)
+ RAP_Write(Z_IDLE_COUNT, 5);
+
+ cirque_pinnacle_set_adc_attenuation(CIRQUE_PINNACLE_ATTENUATION);
- cirque_pinnacle_set_adc_attenuation(0xFF);
cirque_pinnacle_tune_edge_sensitivity();
cirque_pinnacle_enable_feed(true);
}
-// Reads XYZ data from Pinnacle registers 0x14 through 0x17
-// Stores result in pinnacle_data_t struct with xValue, yValue, and zValue members
pinnacle_data_t cirque_pinnacle_read_data(void) {
- uint8_t data[6] = {0};
- pinnacle_data_t result = {0};
+ uint8_t data_ready = 0;
+ uint8_t data[6] = {0};
+ pinnacle_data_t result = {0};
+
+ // Check if there is valid data available
+ RAP_ReadBytes(STATUS_1, &data_ready, 1); // bit2 is Software Data Ready, bit3 is Command Complete, bit0 and bit1 are reserved/unused
+ if ((data_ready & 0x04) == 0) {
+ // no data available yet
+ result.valid = false; // be explicit
+ return result;
+ }
+
+ // Read all data bytes
RAP_ReadBytes(PACKET_BYTE_0, data, 6);
+ // Get ready for the next data sample
cirque_pinnacle_clear_flags();
- result.buttonFlags = data[0] & 0x3F;
- result.xValue = data[2] | ((data[4] & 0x0F) << 8);
- result.yValue = data[3] | ((data[4] & 0xF0) << 4);
- result.zValue = data[5] & 0x3F;
-
- result.touchDown = (result.xValue != 0 || result.yValue != 0);
+#if CIRQUE_PINNACLE_POSITION_MODE
+ // Decode data for absolute mode
+ // Register 0x13 is unused in this mode (palm detection area)
+ result.buttonFlags = data[0] & 0x3F; // bit0 to bit5 are switch 0-5, only hardware button presses (from input pin on the Pinnacle chip)
+ result.xValue = data[2] | ((data[4] & 0x0F) << 8); // merge high and low bits for X
+ result.yValue = data[3] | ((data[4] & 0xF0) << 4); // merge high and low bits for Y
+ result.zValue = data[5] & 0x3F; // Z is only lower 6 bits, upper 2 bits are reserved/unused
+ result.touchDown = (result.xValue != 0 || result.yValue != 0); // (0,0) is a "magic coordinate" to indicate "finger touched down"
+#else
+ // Decode data for relative mode
+ // Registers 0x16 and 0x17 are unused in this mode
+ result.buttons = data[0] & 0x07; // bit0 = primary button, bit1 = secondary button, bit2 = auxilary button, if Taps enabled then also software-recognized taps are reported
+ result.xDelta = data[1];
+ result.yDelta = data[2];
+ result.wheelCount = data[3];
+#endif
+ result.valid = true;
return result;
}