1 files changed, 28 insertions, 25 deletions

diff --git a/drivers/led/issi/is31fl3731.c b/drivers/led/issi/is31fl3731.c
index 80344ca721..15a01b6d75 100644
--- a/drivers/led/issi/is31fl3731.c
+++ b/drivers/led/issi/is31fl3731.c
@@ -63,7 +63,7 @@ uint8_t g_twi_transfer_buffer[20];
 // These buffers match the IS31FL3731 PWM registers 0x24-0xB3.
 // Storing them like this is optimal for I2C transfers to the registers.
 // We could optimize this and take out the unused registers from these
-// buffers and the transfers in IS31FL3731_write_pwm_buffer() but it's
+// buffers and the transfers in is31fl3731_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
 uint8_t g_pwm_buffer[DRIVER_COUNT][144];
 bool    g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
@@ -85,7 +85,7 @@ bool    g_led_control_registers_update_required[DRIVER_COUNT] = {false};
 // 0x0E - R17,G15,G14,G13,G12,G11,G10,G09
 // 0x10 - R16,R15,R14,R13,R12,R11,R10,R09
 
-void IS31FL3731_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
+void is31fl3731_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
     g_twi_transfer_buffer[0] = reg;
     g_twi_transfer_buffer[1] = data;
 
@@ -98,7 +98,7 @@ void IS31FL3731_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
 #endif
 }
 
-void IS31FL3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
+void is31fl3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
     // assumes bank is already selected
 
     // transmit PWM registers in 9 transfers of 16 bytes
@@ -123,67 +123,70 @@ void IS31FL3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
     }
 }
 
-void IS31FL3731_init(uint8_t addr) {
+void is31fl3731_init(uint8_t addr) {
     // In order to avoid the LEDs being driven with garbage data
     // in the LED driver's PWM registers, first enable software shutdown,
     // then set up the mode and other settings, clear the PWM registers,
     // then disable software shutdown.
 
     // select "function register" bank
-    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
+    is31fl3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
 
     // enable software shutdown
-    IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00);
+    is31fl3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00);
 #ifdef ISSI_3731_DEGHOST // set to enable de-ghosting of the array
-    IS31FL3731_write_register(addr, ISSI_REG_GHOST_IMAGE_PREVENTION, 0x10);
+    is31fl3731_write_register(addr, ISSI_REG_GHOST_IMAGE_PREVENTION, 0x10);
 #endif
 
     // this delay was copied from other drivers, might not be needed
     wait_ms(10);
 
     // picture mode
-    IS31FL3731_write_register(addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE);
+    is31fl3731_write_register(addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE);
     // display frame 0
-    IS31FL3731_write_register(addr, ISSI_REG_PICTUREFRAME, 0x00);
+    is31fl3731_write_register(addr, ISSI_REG_PICTUREFRAME, 0x00);
     // audio sync off
-    IS31FL3731_write_register(addr, ISSI_REG_AUDIOSYNC, 0x00);
+    is31fl3731_write_register(addr, ISSI_REG_AUDIOSYNC, 0x00);
 
     // select bank 0
-    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
+    is31fl3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
 
     // turn off all LEDs in the LED control register
     for (int i = 0x00; i <= 0x11; i++) {
-        IS31FL3731_write_register(addr, i, 0x00);
+        is31fl3731_write_register(addr, i, 0x00);
     }
 
     // turn off all LEDs in the blink control register (not really needed)
     for (int i = 0x12; i <= 0x23; i++) {
-        IS31FL3731_write_register(addr, i, 0x00);
+        is31fl3731_write_register(addr, i, 0x00);
     }
 
     // set PWM on all LEDs to 0
     for (int i = 0x24; i <= 0xB3; i++) {
-        IS31FL3731_write_register(addr, i, 0x00);
+        is31fl3731_write_register(addr, i, 0x00);
     }
 
     // select "function register" bank
-    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
+    is31fl3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
 
     // disable software shutdown
-    IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x01);
+    is31fl3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x01);
 
     // select bank 0 and leave it selected.
     // most usage after initialization is just writing PWM buffers in bank 0
     // as there's not much point in double-buffering
-    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
+    is31fl3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
 }
 
-void IS31FL3731_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
+void is31fl3731_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
     is31_led led;
     if (index >= 0 && index < RGB_MATRIX_LED_COUNT) {
         memcpy_P(&led, (&g_is31_leds[index]), sizeof(led));
 
         // Subtract 0x24 to get the second index of g_pwm_buffer
+        if (g_pwm_buffer[led.driver][led.r - 0x24] == red && g_pwm_buffer[led.driver][led.g - 0x24] == green && g_pwm_buffer[led.driver][led.b - 0x24] == blue) {
+            return;
+        }
         g_pwm_buffer[led.driver][led.r - 0x24]   = red;
         g_pwm_buffer[led.driver][led.g - 0x24]   = green;
         g_pwm_buffer[led.driver][led.b - 0x24]   = blue;
@@ -191,13 +194,13 @@ void IS31FL3731_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
     }
 }
 
-void IS31FL3731_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
+void is31fl3731_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
     for (int i = 0; i < RGB_MATRIX_LED_COUNT; i++) {
-        IS31FL3731_set_color(i, red, green, blue);
+        is31fl3731_set_color(i, red, green, blue);
     }
 }
 
-void IS31FL3731_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
+void is31fl3731_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
     is31_led led;
     memcpy_P(&led, (&g_is31_leds[index]), sizeof(led));
 
@@ -227,17 +230,17 @@ void IS31FL3731_set_led_control_register(uint8_t index, bool red, bool green, bo
     g_led_control_registers_update_required[led.driver] = true;
 }
 
-void IS31FL3731_update_pwm_buffers(uint8_t addr, uint8_t index) {
+void is31fl3731_update_pwm_buffers(uint8_t addr, uint8_t index) {
     if (g_pwm_buffer_update_required[index]) {
-        IS31FL3731_write_pwm_buffer(addr, g_pwm_buffer[index]);
+        is31fl3731_write_pwm_buffer(addr, g_pwm_buffer[index]);
     }
     g_pwm_buffer_update_required[index] = false;
 }
 
-void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index) {
+void is31fl3731_update_led_control_registers(uint8_t addr, uint8_t index) {
     if (g_led_control_registers_update_required[index]) {
         for (int i = 0; i < 18; i++) {
-            IS31FL3731_write_register(addr, i, g_led_control_registers[index][i]);
+            is31fl3731_write_register(addr, i, g_led_control_registers[index][i]);
         }
     }
     g_led_control_registers_update_required[index] = false;