summaryrefslogtreecommitdiffstats
path: root/drivers/chibios
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/chibios')
-rw-r--r--drivers/chibios/analog.c321
-rw-r--r--drivers/chibios/analog.h41
-rw-r--r--drivers/chibios/i2c_master.c121
-rw-r--r--drivers/chibios/i2c_master.h113
-rw-r--r--drivers/chibios/serial.c290
-rw-r--r--drivers/chibios/serial.h62
-rw-r--r--drivers/chibios/serial_usart.c208
-rw-r--r--drivers/chibios/serial_usart.h90
-rw-r--r--drivers/chibios/serial_usart_duplex.c261
-rw-r--r--drivers/chibios/spi_master.c148
-rw-r--r--drivers/chibios/spi_master.h80
-rw-r--r--drivers/chibios/uart.c50
-rw-r--r--drivers/chibios/uart.h77
-rw-r--r--drivers/chibios/usbpd_stm32g4.c76
-rw-r--r--drivers/chibios/ws2812.c114
-rw-r--r--drivers/chibios/ws2812_pwm.c311
-rw-r--r--drivers/chibios/ws2812_spi.c159
17 files changed, 0 insertions, 2522 deletions
diff --git a/drivers/chibios/analog.c b/drivers/chibios/analog.c
deleted file mode 100644
index 8c476fcac2..0000000000
--- a/drivers/chibios/analog.c
+++ /dev/null
@@ -1,321 +0,0 @@
-/* Copyright 2019 Drew Mills
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "quantum.h"
-#include "analog.h"
-#include <ch.h>
-#include <hal.h>
-
-#if !HAL_USE_ADC
-# error "You need to set HAL_USE_ADC to TRUE in your halconf.h to use the ADC."
-#endif
-
-#if !STM32_ADC_USE_ADC1 && !STM32_ADC_USE_ADC2 && !STM32_ADC_USE_ADC3 && !STM32_ADC_USE_ADC4
-# error "You need to set one of the 'STM32_ADC_USE_ADCx' settings to TRUE in your mcuconf.h to use the ADC."
-#endif
-
-#if STM32_ADC_DUAL_MODE
-# error "STM32 ADC Dual Mode is not supported at this time."
-#endif
-
-#if STM32_ADCV3_OVERSAMPLING
-# error "STM32 ADCV3 Oversampling is not supported at this time."
-#endif
-
-// Otherwise assume V3
-#if defined(STM32F0XX) || defined(STM32L0XX)
-# define USE_ADCV1
-#elif defined(STM32F1XX) || defined(STM32F2XX) || defined(STM32F4XX)
-# define USE_ADCV2
-#endif
-
-// BODGE to make v2 look like v1,3 and 4
-#ifdef USE_ADCV2
-# if !defined(ADC_SMPR_SMP_1P5) && defined(ADC_SAMPLE_3)
-# define ADC_SMPR_SMP_1P5 ADC_SAMPLE_3
-# define ADC_SMPR_SMP_7P5 ADC_SAMPLE_15
-# define ADC_SMPR_SMP_13P5 ADC_SAMPLE_28
-# define ADC_SMPR_SMP_28P5 ADC_SAMPLE_56
-# define ADC_SMPR_SMP_41P5 ADC_SAMPLE_84
-# define ADC_SMPR_SMP_55P5 ADC_SAMPLE_112
-# define ADC_SMPR_SMP_71P5 ADC_SAMPLE_144
-# define ADC_SMPR_SMP_239P5 ADC_SAMPLE_480
-# endif
-
-# if !defined(ADC_SMPR_SMP_1P5) && defined(ADC_SAMPLE_1P5)
-# define ADC_SMPR_SMP_1P5 ADC_SAMPLE_1P5
-# define ADC_SMPR_SMP_7P5 ADC_SAMPLE_7P5
-# define ADC_SMPR_SMP_13P5 ADC_SAMPLE_13P5
-# define ADC_SMPR_SMP_28P5 ADC_SAMPLE_28P5
-# define ADC_SMPR_SMP_41P5 ADC_SAMPLE_41P5
-# define ADC_SMPR_SMP_55P5 ADC_SAMPLE_55P5
-# define ADC_SMPR_SMP_71P5 ADC_SAMPLE_71P5
-# define ADC_SMPR_SMP_239P5 ADC_SAMPLE_239P5
-# endif
-
-// we still sample at 12bit, but scale down to the requested bit range
-# define ADC_CFGR1_RES_12BIT 12
-# define ADC_CFGR1_RES_10BIT 10
-# define ADC_CFGR1_RES_8BIT 8
-# define ADC_CFGR1_RES_6BIT 6
-#endif
-
-/* User configurable ADC options */
-#ifndef ADC_COUNT
-# if defined(STM32F0XX) || defined(STM32F1XX) || defined(STM32F4XX)
-# define ADC_COUNT 1
-# elif defined(STM32F3XX)
-# define ADC_COUNT 4
-# else
-# error "ADC_COUNT has not been set for this ARM microcontroller."
-# endif
-#endif
-
-#ifndef ADC_NUM_CHANNELS
-# define ADC_NUM_CHANNELS 1
-#elif ADC_NUM_CHANNELS != 1
-# error "The ARM ADC implementation currently only supports reading one channel at a time."
-#endif
-
-#ifndef ADC_BUFFER_DEPTH
-# define ADC_BUFFER_DEPTH 1
-#endif
-
-// For more sampling rate options, look at hal_adc_lld.h in ChibiOS
-#ifndef ADC_SAMPLING_RATE
-# define ADC_SAMPLING_RATE ADC_SMPR_SMP_1P5
-#endif
-
-// Options are 12, 10, 8, and 6 bit.
-#ifndef ADC_RESOLUTION
-# ifdef ADC_CFGR_RES_10BITS // ADCv3, ADCv4
-# define ADC_RESOLUTION ADC_CFGR_RES_10BITS
-# else // ADCv1, ADCv5, or the bodge for ADCv2 above
-# define ADC_RESOLUTION ADC_CFGR1_RES_10BIT
-# endif
-#endif
-
-static ADCConfig adcCfg = {};
-static adcsample_t sampleBuffer[ADC_NUM_CHANNELS * ADC_BUFFER_DEPTH];
-
-// Initialize to max number of ADCs, set to empty object to initialize all to false.
-static bool adcInitialized[ADC_COUNT] = {};
-
-// TODO: add back TR handling???
-static ADCConversionGroup adcConversionGroup = {
- .circular = FALSE,
- .num_channels = (uint16_t)(ADC_NUM_CHANNELS),
-#if defined(USE_ADCV1)
- .cfgr1 = ADC_CFGR1_CONT | ADC_RESOLUTION,
- .smpr = ADC_SAMPLING_RATE,
-#elif defined(USE_ADCV2)
-# if !defined(STM32F1XX)
- .cr2 = ADC_CR2_SWSTART, // F103 seem very unhappy with, F401 seems very unhappy without...
-# endif
- .smpr2 = ADC_SMPR2_SMP_AN0(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN1(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN2(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN3(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN4(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN5(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN6(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN7(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN8(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN9(ADC_SAMPLING_RATE),
- .smpr1 = ADC_SMPR1_SMP_AN10(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN11(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN12(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN13(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN14(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN15(ADC_SAMPLING_RATE),
-#else
- .cfgr = ADC_CFGR_CONT | ADC_RESOLUTION,
- .smpr = {ADC_SMPR1_SMP_AN0(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN1(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN2(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN3(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN4(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN5(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN6(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN7(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN8(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN9(ADC_SAMPLING_RATE), ADC_SMPR2_SMP_AN10(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN11(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN12(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN13(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN14(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN15(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN16(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN17(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN18(ADC_SAMPLING_RATE)},
-#endif
-};
-
-// clang-format off
-__attribute__((weak)) adc_mux pinToMux(pin_t pin) {
- switch (pin) {
-#if defined(STM32F0XX)
- case A0: return TO_MUX( ADC_CHSELR_CHSEL0, 0 );
- case A1: return TO_MUX( ADC_CHSELR_CHSEL1, 0 );
- case A2: return TO_MUX( ADC_CHSELR_CHSEL2, 0 );
- case A3: return TO_MUX( ADC_CHSELR_CHSEL3, 0 );
- case A4: return TO_MUX( ADC_CHSELR_CHSEL4, 0 );
- case A5: return TO_MUX( ADC_CHSELR_CHSEL5, 0 );
- case A6: return TO_MUX( ADC_CHSELR_CHSEL6, 0 );
- case A7: return TO_MUX( ADC_CHSELR_CHSEL7, 0 );
- case B0: return TO_MUX( ADC_CHSELR_CHSEL8, 0 );
- case B1: return TO_MUX( ADC_CHSELR_CHSEL9, 0 );
- case C0: return TO_MUX( ADC_CHSELR_CHSEL10, 0 );
- case C1: return TO_MUX( ADC_CHSELR_CHSEL11, 0 );
- case C2: return TO_MUX( ADC_CHSELR_CHSEL12, 0 );
- case C3: return TO_MUX( ADC_CHSELR_CHSEL13, 0 );
- case C4: return TO_MUX( ADC_CHSELR_CHSEL14, 0 );
- case C5: return TO_MUX( ADC_CHSELR_CHSEL15, 0 );
-#elif defined(STM32F3XX)
- case A0: return TO_MUX( ADC_CHANNEL_IN1, 0 );
- case A1: return TO_MUX( ADC_CHANNEL_IN2, 0 );
- case A2: return TO_MUX( ADC_CHANNEL_IN3, 0 );
- case A3: return TO_MUX( ADC_CHANNEL_IN4, 0 );
- case A4: return TO_MUX( ADC_CHANNEL_IN1, 1 );
- case A5: return TO_MUX( ADC_CHANNEL_IN2, 1 );
- case A6: return TO_MUX( ADC_CHANNEL_IN3, 1 );
- case A7: return TO_MUX( ADC_CHANNEL_IN4, 1 );
- case B0: return TO_MUX( ADC_CHANNEL_IN12, 2 );
- case B1: return TO_MUX( ADC_CHANNEL_IN1, 2 );
- case B2: return TO_MUX( ADC_CHANNEL_IN12, 1 );
- case B12: return TO_MUX( ADC_CHANNEL_IN3, 3 );
- case B13: return TO_MUX( ADC_CHANNEL_IN5, 2 );
- case B14: return TO_MUX( ADC_CHANNEL_IN4, 3 );
- case B15: return TO_MUX( ADC_CHANNEL_IN5, 3 );
- case C0: return TO_MUX( ADC_CHANNEL_IN6, 0 ); // Can also be ADC2
- case C1: return TO_MUX( ADC_CHANNEL_IN7, 0 ); // Can also be ADC2
- case C2: return TO_MUX( ADC_CHANNEL_IN8, 0 ); // Can also be ADC2
- case C3: return TO_MUX( ADC_CHANNEL_IN9, 0 ); // Can also be ADC2
- case C4: return TO_MUX( ADC_CHANNEL_IN5, 1 );
- case C5: return TO_MUX( ADC_CHANNEL_IN11, 1 );
- case D8: return TO_MUX( ADC_CHANNEL_IN12, 3 );
- case D9: return TO_MUX( ADC_CHANNEL_IN13, 3 );
- case D10: return TO_MUX( ADC_CHANNEL_IN7, 2 ); // Can also be ADC4
- case D11: return TO_MUX( ADC_CHANNEL_IN8, 2 ); // Can also be ADC4
- case D12: return TO_MUX( ADC_CHANNEL_IN9, 2 ); // Can also be ADC4
- case D13: return TO_MUX( ADC_CHANNEL_IN10, 2 ); // Can also be ADC4
- case D14: return TO_MUX( ADC_CHANNEL_IN11, 2 ); // Can also be ADC4
- case E7: return TO_MUX( ADC_CHANNEL_IN13, 2 );
- case E8: return TO_MUX( ADC_CHANNEL_IN6, 2 ); // Can also be ADC4
- case E9: return TO_MUX( ADC_CHANNEL_IN2, 2 );
- case E10: return TO_MUX( ADC_CHANNEL_IN14, 2 );
- case E11: return TO_MUX( ADC_CHANNEL_IN15, 2 );
- case E12: return TO_MUX( ADC_CHANNEL_IN16, 2 );
- case E13: return TO_MUX( ADC_CHANNEL_IN3, 2 );
- case E14: return TO_MUX( ADC_CHANNEL_IN1, 3 );
- case E15: return TO_MUX( ADC_CHANNEL_IN2, 3 );
- case F2: return TO_MUX( ADC_CHANNEL_IN10, 0 ); // Can also be ADC2
- case F4: return TO_MUX( ADC_CHANNEL_IN5, 0 );
-#elif defined(STM32F4XX)
- case A0: return TO_MUX( ADC_CHANNEL_IN0, 0 );
- case A1: return TO_MUX( ADC_CHANNEL_IN1, 0 );
- case A2: return TO_MUX( ADC_CHANNEL_IN2, 0 );
- case A3: return TO_MUX( ADC_CHANNEL_IN3, 0 );
- case A4: return TO_MUX( ADC_CHANNEL_IN4, 0 );
- case A5: return TO_MUX( ADC_CHANNEL_IN5, 0 );
- case A6: return TO_MUX( ADC_CHANNEL_IN6, 0 );
- case A7: return TO_MUX( ADC_CHANNEL_IN7, 0 );
- case B0: return TO_MUX( ADC_CHANNEL_IN8, 0 );
- case B1: return TO_MUX( ADC_CHANNEL_IN9, 0 );
- case C0: return TO_MUX( ADC_CHANNEL_IN10, 0 );
- case C1: return TO_MUX( ADC_CHANNEL_IN11, 0 );
- case C2: return TO_MUX( ADC_CHANNEL_IN12, 0 );
- case C3: return TO_MUX( ADC_CHANNEL_IN13, 0 );
- case C4: return TO_MUX( ADC_CHANNEL_IN14, 0 );
- case C5: return TO_MUX( ADC_CHANNEL_IN15, 0 );
-# if STM32_ADC_USE_ADC3
- case F3: return TO_MUX( ADC_CHANNEL_IN9, 2 );
- case F4: return TO_MUX( ADC_CHANNEL_IN14, 2 );
- case F5: return TO_MUX( ADC_CHANNEL_IN15, 2 );
- case F6: return TO_MUX( ADC_CHANNEL_IN4, 2 );
- case F7: return TO_MUX( ADC_CHANNEL_IN5, 2 );
- case F8: return TO_MUX( ADC_CHANNEL_IN6, 2 );
- case F9: return TO_MUX( ADC_CHANNEL_IN7, 2 );
- case F10: return TO_MUX( ADC_CHANNEL_IN8, 2 );
-# endif
-#elif defined(STM32F1XX)
- case A0: return TO_MUX( ADC_CHANNEL_IN0, 0 );
- case A1: return TO_MUX( ADC_CHANNEL_IN1, 0 );
- case A2: return TO_MUX( ADC_CHANNEL_IN2, 0 );
- case A3: return TO_MUX( ADC_CHANNEL_IN3, 0 );
- case A4: return TO_MUX( ADC_CHANNEL_IN4, 0 );
- case A5: return TO_MUX( ADC_CHANNEL_IN5, 0 );
- case A6: return TO_MUX( ADC_CHANNEL_IN6, 0 );
- case A7: return TO_MUX( ADC_CHANNEL_IN7, 0 );
- case B0: return TO_MUX( ADC_CHANNEL_IN8, 0 );
- case B1: return TO_MUX( ADC_CHANNEL_IN9, 0 );
- case C0: return TO_MUX( ADC_CHANNEL_IN10, 0 );
- case C1: return TO_MUX( ADC_CHANNEL_IN11, 0 );
- case C2: return TO_MUX( ADC_CHANNEL_IN12, 0 );
- case C3: return TO_MUX( ADC_CHANNEL_IN13, 0 );
- case C4: return TO_MUX( ADC_CHANNEL_IN14, 0 );
- case C5: return TO_MUX( ADC_CHANNEL_IN15, 0 );
- // STM32F103x[C-G] in 144-pin packages also have analog inputs on F6...F10, but they are on ADC3, and the
- // ChibiOS ADC driver for STM32F1xx currently supports only ADC1, therefore these pins are not usable.
-#endif
- }
-
- // return an adc that would never be used so intToADCDriver will bail out
- return TO_MUX(0, 0xFF);
-}
-// clang-format on
-
-static inline ADCDriver* intToADCDriver(uint8_t adcInt) {
- switch (adcInt) {
-#if STM32_ADC_USE_ADC1
- case 0:
- return &ADCD1;
-#endif
-#if STM32_ADC_USE_ADC2
- case 1:
- return &ADCD2;
-#endif
-#if STM32_ADC_USE_ADC3
- case 2:
- return &ADCD3;
-#endif
-#if STM32_ADC_USE_ADC4
- case 3:
- return &ADCD4;
-#endif
- }
-
- return NULL;
-}
-
-static inline void manageAdcInitializationDriver(uint8_t adc, ADCDriver* adcDriver) {
- if (!adcInitialized[adc]) {
- adcStart(adcDriver, &adcCfg);
- adcInitialized[adc] = true;
- }
-}
-
-int16_t analogReadPin(pin_t pin) {
- palSetLineMode(pin, PAL_MODE_INPUT_ANALOG);
-
- return adc_read(pinToMux(pin));
-}
-
-int16_t analogReadPinAdc(pin_t pin, uint8_t adc) {
- palSetLineMode(pin, PAL_MODE_INPUT_ANALOG);
-
- adc_mux target = pinToMux(pin);
- target.adc = adc;
- return adc_read(target);
-}
-
-int16_t adc_read(adc_mux mux) {
-#if defined(USE_ADCV1)
- // TODO: fix previous assumption of only 1 input...
- adcConversionGroup.chselr = 1 << mux.input; /*no macro to convert N to ADC_CHSELR_CHSEL1*/
-#elif defined(USE_ADCV2)
- adcConversionGroup.sqr3 = ADC_SQR3_SQ1_N(mux.input);
-#else
- adcConversionGroup.sqr[0] = ADC_SQR1_SQ1_N(mux.input);
-#endif
-
- ADCDriver* targetDriver = intToADCDriver(mux.adc);
- if (!targetDriver) {
- return 0;
- }
-
- manageAdcInitializationDriver(mux.adc, targetDriver);
- if (adcConvert(targetDriver, &adcConversionGroup, &sampleBuffer[0], ADC_BUFFER_DEPTH) != MSG_OK) {
- return 0;
- }
-
-#ifdef USE_ADCV2
- // fake 12-bit -> N-bit scale
- return (*sampleBuffer) >> (12 - ADC_RESOLUTION);
-#else
- // already handled as part of adcConvert
- return *sampleBuffer;
-#endif
-}
diff --git a/drivers/chibios/analog.h b/drivers/chibios/analog.h
deleted file mode 100644
index e61c394265..0000000000
--- a/drivers/chibios/analog.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* Copyright 2019 Drew Mills
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include <stdint.h>
-#include "quantum.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
- uint16_t input;
- uint8_t adc;
-} adc_mux;
-#define TO_MUX(i, a) \
- (adc_mux) { i, a }
-
-int16_t analogReadPin(pin_t pin);
-int16_t analogReadPinAdc(pin_t pin, uint8_t adc);
-adc_mux pinToMux(pin_t pin);
-
-int16_t adc_read(adc_mux mux);
-
-#ifdef __cplusplus
-}
-#endif
diff --git a/drivers/chibios/i2c_master.c b/drivers/chibios/i2c_master.c
deleted file mode 100644
index fc4bb2ab37..0000000000
--- a/drivers/chibios/i2c_master.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/* Copyright 2018 Jack Humbert
- * Copyright 2018 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-/* This library is only valid for STM32 processors.
- * This library follows the convention of the AVR i2c_master library.
- * As a result addresses are expected to be already shifted (addr << 1).
- * I2CD1 is the default driver which corresponds to pins B6 and B7. This
- * can be changed.
- * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
- * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. Pins B6 and B7 are used
- * but using any other I2C pins should be trivial.
- */
-#include "quantum.h"
-#include "i2c_master.h"
-#include <string.h>
-#include <hal.h>
-
-static uint8_t i2c_address;
-
-static const I2CConfig i2cconfig = {
-#if defined(USE_I2CV1_CONTRIB)
- I2C1_CLOCK_SPEED,
-#elif defined(USE_I2CV1)
- I2C1_OPMODE,
- I2C1_CLOCK_SPEED,
- I2C1_DUTY_CYCLE,
-#else
- // This configures the I2C clock to 400khz assuming a 72Mhz clock
- // For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
- STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) | STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) | STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH) | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL), 0, 0
-#endif
-};
-
-static i2c_status_t chibios_to_qmk(const msg_t* status) {
- switch (*status) {
- case I2C_NO_ERROR:
- return I2C_STATUS_SUCCESS;
- case I2C_TIMEOUT:
- return I2C_STATUS_TIMEOUT;
- // I2C_BUS_ERROR, I2C_ARBITRATION_LOST, I2C_ACK_FAILURE, I2C_OVERRUN, I2C_PEC_ERROR, I2C_SMB_ALERT
- default:
- return I2C_STATUS_ERROR;
- }
-}
-
-__attribute__((weak)) void i2c_init(void) {
- static bool is_initialised = false;
- if (!is_initialised) {
- is_initialised = true;
-
- // Try releasing special pins for a short time
- palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_INPUT);
- palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_INPUT);
-
- chThdSleepMilliseconds(10);
-#if defined(USE_GPIOV1)
- palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, I2C1_SCL_PAL_MODE);
- palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, I2C1_SDA_PAL_MODE);
-#else
- palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
- palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
-#endif
- }
-}
-
-i2c_status_t i2c_start(uint8_t address) {
- i2c_address = address;
- i2cStart(&I2C_DRIVER, &i2cconfig);
- return I2C_STATUS_SUCCESS;
-}
-
-i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) {
- i2c_address = address;
- i2cStart(&I2C_DRIVER, &i2cconfig);
- msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, TIME_MS2I(timeout));
- return chibios_to_qmk(&status);
-}
-
-i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) {
- i2c_address = address;
- i2cStart(&I2C_DRIVER, &i2cconfig);
- msg_t status = i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, TIME_MS2I(timeout));
- return chibios_to_qmk(&status);
-}
-
-i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) {
- i2c_address = devaddr;
- i2cStart(&I2C_DRIVER, &i2cconfig);
-
- uint8_t complete_packet[length + 1];
- for (uint8_t i = 0; i < length; i++) {
- complete_packet[i + 1] = data[i];
- }
- complete_packet[0] = regaddr;
-
- msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, TIME_MS2I(timeout));
- return chibios_to_qmk(&status);
-}
-
-i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) {
- i2c_address = devaddr;
- i2cStart(&I2C_DRIVER, &i2cconfig);
- msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), &regaddr, 1, data, length, TIME_MS2I(timeout));
- return chibios_to_qmk(&status);
-}
-
-void i2c_stop(void) { i2cStop(&I2C_DRIVER); }
diff --git a/drivers/chibios/i2c_master.h b/drivers/chibios/i2c_master.h
deleted file mode 100644
index c68109acbd..0000000000
--- a/drivers/chibios/i2c_master.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/* Copyright 2018 Jack Humbert
- * Copyright 2018 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-/* This library follows the convention of the AVR i2c_master library.
- * As a result addresses are expected to be already shifted (addr << 1).
- * I2CD1 is the default driver which corresponds to pins B6 and B7. This
- * can be changed.
- * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
- * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file.
- */
-#pragma once
-
-#include <ch.h>
-#include <hal.h>
-
-#ifdef I2C1_BANK
-# define I2C1_SCL_BANK I2C1_BANK
-# define I2C1_SDA_BANK I2C1_BANK
-#endif
-
-#ifndef I2C1_SCL_BANK
-# define I2C1_SCL_BANK GPIOB
-#endif
-
-#ifndef I2C1_SDA_BANK
-# define I2C1_SDA_BANK GPIOB
-#endif
-
-#ifndef I2C1_SCL
-# define I2C1_SCL 6
-#endif
-#ifndef I2C1_SDA
-# define I2C1_SDA 7
-#endif
-
-#ifdef USE_I2CV1
-# ifndef I2C1_OPMODE
-# define I2C1_OPMODE OPMODE_I2C
-# endif
-# ifndef I2C1_CLOCK_SPEED
-# define I2C1_CLOCK_SPEED 100000 /* 400000 */
-# endif
-# ifndef I2C1_DUTY_CYCLE
-# define I2C1_DUTY_CYCLE STD_DUTY_CYCLE /* FAST_DUTY_CYCLE_2 */
-# endif
-#else
-// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock
-// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
-# ifndef I2C1_TIMINGR_PRESC
-# define I2C1_TIMINGR_PRESC 0U
-# endif
-# ifndef I2C1_TIMINGR_SCLDEL
-# define I2C1_TIMINGR_SCLDEL 7U
-# endif
-# ifndef I2C1_TIMINGR_SDADEL
-# define I2C1_TIMINGR_SDADEL 0U
-# endif
-# ifndef I2C1_TIMINGR_SCLH
-# define I2C1_TIMINGR_SCLH 38U
-# endif
-# ifndef I2C1_TIMINGR_SCLL
-# define I2C1_TIMINGR_SCLL 129U
-# endif
-#endif
-
-#ifndef I2C_DRIVER
-# define I2C_DRIVER I2CD1
-#endif
-
-#ifdef USE_GPIOV1
-# ifndef I2C1_SCL_PAL_MODE
-# define I2C1_SCL_PAL_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN
-# endif
-# ifndef I2C1_SDA_PAL_MODE
-# define I2C1_SDA_PAL_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN
-# endif
-#else
-// The default PAL alternate modes are used to signal that the pins are used for I2C
-# ifndef I2C1_SCL_PAL_MODE
-# define I2C1_SCL_PAL_MODE 4
-# endif
-# ifndef I2C1_SDA_PAL_MODE
-# define I2C1_SDA_PAL_MODE 4
-# endif
-#endif
-
-typedef int16_t i2c_status_t;
-
-#define I2C_STATUS_SUCCESS (0)
-#define I2C_STATUS_ERROR (-1)
-#define I2C_STATUS_TIMEOUT (-2)
-
-void i2c_init(void);
-i2c_status_t i2c_start(uint8_t address);
-i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout);
-i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
-i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout);
-i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
-void i2c_stop(void);
diff --git a/drivers/chibios/serial.c b/drivers/chibios/serial.c
deleted file mode 100644
index 54f7e1321f..0000000000
--- a/drivers/chibios/serial.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * WARNING: be careful changing this code, it is very timing dependent
- */
-
-#include "quantum.h"
-#include "serial.h"
-#include "wait.h"
-
-#include <hal.h>
-
-// TODO: resolve/remove build warnings
-#if defined(RGBLIGHT_ENABLE) && defined(RGBLED_SPLIT) && defined(PROTOCOL_CHIBIOS) && defined(WS2812_DRIVER_BITBANG)
-# warning "RGBLED_SPLIT not supported with bitbang WS2812 driver"
-#endif
-
-// default wait implementation cannot be called within interrupt
-// this method seems to be more accurate than GPT timers
-#if PORT_SUPPORTS_RT == FALSE
-# error "chSysPolledDelayX method not supported on this platform"
-#else
-# undef wait_us
-# define wait_us(x) chSysPolledDelayX(US2RTC(STM32_SYSCLK, x))
-#endif
-
-#ifndef SELECT_SOFT_SERIAL_SPEED
-# define SELECT_SOFT_SERIAL_SPEED 1
-// TODO: correct speeds...
-// 0: about 189kbps (Experimental only)
-// 1: about 137kbps (default)
-// 2: about 75kbps
-// 3: about 39kbps
-// 4: about 26kbps
-// 5: about 20kbps
-#endif
-
-// Serial pulse period in microseconds. At the moment, going lower than 12 causes communication failure
-#if SELECT_SOFT_SERIAL_SPEED == 0
-# define SERIAL_DELAY 12
-#elif SELECT_SOFT_SERIAL_SPEED == 1
-# define SERIAL_DELAY 16
-#elif SELECT_SOFT_SERIAL_SPEED == 2
-# define SERIAL_DELAY 24
-#elif SELECT_SOFT_SERIAL_SPEED == 3
-# define SERIAL_DELAY 32
-#elif SELECT_SOFT_SERIAL_SPEED == 4
-# define SERIAL_DELAY 48
-#elif SELECT_SOFT_SERIAL_SPEED == 5
-# define SERIAL_DELAY 64
-#else
-# error invalid SELECT_SOFT_SERIAL_SPEED value
-#endif
-
-inline static void serial_delay(void) { wait_us(SERIAL_DELAY); }
-inline static void serial_delay_half(void) { wait_us(SERIAL_DELAY / 2); }
-inline static void serial_delay_blip(void) { wait_us(1); }
-inline static void serial_output(void) { setPinOutput(SOFT_SERIAL_PIN); }
-inline static void serial_input(void) { setPinInputHigh(SOFT_SERIAL_PIN); }
-inline static bool serial_read_pin(void) { return !!readPin(SOFT_SERIAL_PIN); }
-inline static void serial_low(void) { writePinLow(SOFT_SERIAL_PIN); }
-inline static void serial_high(void) { writePinHigh(SOFT_SERIAL_PIN); }
-
-void interrupt_handler(void *arg);
-
-// Use thread + palWaitLineTimeout instead of palSetLineCallback
-// - Methods like setPinOutput and palEnableLineEvent/palDisableLineEvent
-// cause the interrupt to lock up, which would limit to only receiving data...
-static THD_WORKING_AREA(waThread1, 128);
-static THD_FUNCTION(Thread1, arg) {
- (void)arg;
- chRegSetThreadName("blinker");
- while (true) {
- palWaitLineTimeout(SOFT_SERIAL_PIN, TIME_INFINITE);
- interrupt_handler(NULL);
- }
-}
-
-static SSTD_t *Transaction_table = NULL;
-static uint8_t Transaction_table_size = 0;
-
-void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size) {
- Transaction_table = sstd_table;
- Transaction_table_size = (uint8_t)sstd_table_size;
-
- serial_output();
- serial_high();
-}
-
-void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size) {
- Transaction_table = sstd_table;
- Transaction_table_size = (uint8_t)sstd_table_size;
-
- serial_input();
-
- palEnablePadEvent(PAL_PORT(SOFT_SERIAL_PIN), PAL_PAD(SOFT_SERIAL_PIN), PAL_EVENT_MODE_FALLING_EDGE);
- chThdCreateStatic(waThread1, sizeof(waThread1), HIGHPRIO, Thread1, NULL);
-}
-
-// Used by the master to synchronize timing with the slave.
-static void __attribute__((noinline)) sync_recv(void) {
- serial_input();
- // This shouldn't hang if the slave disconnects because the
- // serial line will float to high if the slave does disconnect.
- while (!serial_read_pin()) {
- }
-
- serial_delay();
-}
-
-// Used by the slave to send a synchronization signal to the master.
-static void __attribute__((noinline)) sync_send(void) {
- serial_output();
-
- serial_low();
- serial_delay();
-
- serial_high();
-}
-
-// Reads a byte from the serial line
-static uint8_t __attribute__((noinline)) serial_read_byte(void) {
- uint8_t byte = 0;
- serial_input();
- for (uint8_t i = 0; i < 8; ++i) {
- byte = (byte << 1) | serial_read_pin();
- serial_delay();
- }
-
- return byte;
-}
-
-// Sends a byte with MSB ordering
-static void __attribute__((noinline)) serial_write_byte(uint8_t data) {
- uint8_t b = 8;
- serial_output();
- while (b--) {
- if (data & (1 << b)) {
- serial_high();
- } else {
- serial_low();
- }
- serial_delay();
- }
-}
-
-// interrupt handle to be used by the slave device
-void interrupt_handler(void *arg) {
- chSysLockFromISR();
-
- sync_send();
-
- // read mid pulses
- serial_delay_blip();
-
- uint8_t checksum_computed = 0;
- int sstd_index = 0;
-
-#ifdef SERIAL_USE_MULTI_TRANSACTION
- sstd_index = serial_read_byte();
- sync_send();
-#endif
-
- SSTD_t *trans = &Transaction_table[sstd_index];
- for (int i = 0; i < trans->initiator2target_buffer_size; ++i) {
- trans->initiator2target_buffer[i] = serial_read_byte();
- sync_send();
- checksum_computed += trans->initiator2target_buffer[i];
- }
- checksum_computed ^= 7;
- uint8_t checksum_received = serial_read_byte();
- sync_send();
-
- // wait for the sync to finish sending
- serial_delay();
-
- uint8_t checksum = 0;
- for (int i = 0; i < trans->target2initiator_buffer_size; ++i) {
- serial_write_byte(trans->target2initiator_buffer[i]);
- sync_send();
- serial_delay_half();
- checksum += trans->target2initiator_buffer[i];
- }
- serial_write_byte(checksum ^ 7);
- sync_send();
-
- // wait for the sync to finish sending
- serial_delay();
-
- *trans->status = (checksum_computed == checksum_received) ? TRANSACTION_ACCEPTED : TRANSACTION_DATA_ERROR;
-
- // end transaction
- serial_input();
-
- // TODO: remove extra delay between transactions
- serial_delay();
-
- chSysUnlockFromISR();
-}
-
-/////////
-// start transaction by initiator
-//
-// int soft_serial_transaction(int sstd_index)
-//
-// Returns:
-// TRANSACTION_END
-// TRANSACTION_NO_RESPONSE
-// TRANSACTION_DATA_ERROR
-// this code is very time dependent, so we need to disable interrupts
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_transaction(void) {
- int sstd_index = 0;
-#else
-int soft_serial_transaction(int sstd_index) {
-#endif
-
- if (sstd_index > Transaction_table_size) return TRANSACTION_TYPE_ERROR;
- SSTD_t *trans = &Transaction_table[sstd_index];
-
- // TODO: remove extra delay between transactions
- serial_delay();
-
- // this code is very time dependent, so we need to disable interrupts
- chSysLock();
-
- // signal to the slave that we want to start a transaction
- serial_output();
- serial_low();
- serial_delay_blip();
-
- // wait for the slaves response
- serial_input();
- serial_high();
- serial_delay();
-
- // check if the slave is present
- if (serial_read_pin()) {
- // slave failed to pull the line low, assume not present
- dprintf("serial::NO_RESPONSE\n");
- chSysUnlock();
- return TRANSACTION_NO_RESPONSE;
- }
-
- // if the slave is present syncronize with it
-
- uint8_t checksum = 0;
- // send data to the slave
-#ifdef SERIAL_USE_MULTI_TRANSACTION
- serial_write_byte(sstd_index); // first chunk is transaction id
- sync_recv();
-#endif
- for (int i = 0; i < trans->initiator2target_buffer_size; ++i) {
- serial_write_byte(trans->initiator2target_buffer[i]);
- sync_recv();
- checksum += trans->initiator2target_buffer[i];
- }
- serial_write_byte(checksum ^ 7);
- sync_recv();
-
- serial_delay();
- serial_delay(); // read mid pulses
-
- // receive data from the slave
- uint8_t checksum_computed = 0;
- for (int i = 0; i < trans->target2initiator_buffe