summaryrefslogtreecommitdiffstats
path: root/drivers/chibios/serial_usart_duplex.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/chibios/serial_usart_duplex.c')
-rw-r--r--drivers/chibios/serial_usart_duplex.c261
1 files changed, 0 insertions, 261 deletions
diff --git a/drivers/chibios/serial_usart_duplex.c b/drivers/chibios/serial_usart_duplex.c
deleted file mode 100644
index cc9b889ac2..0000000000
--- a/drivers/chibios/serial_usart_duplex.c
+++ /dev/null
@@ -1,261 +0,0 @@
-/* Copyright 2021 QMK
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "serial_usart.h"
-
-#include <stdatomic.h>
-
-#if !defined(USE_GPIOV1)
-// The default PAL alternate modes are used to signal that the pins are used for USART
-# if !defined(SERIAL_USART_TX_PAL_MODE)
-# define SERIAL_USART_TX_PAL_MODE 7
-# endif
-# if !defined(SERIAL_USART_RX_PAL_MODE)
-# define SERIAL_USART_RX_PAL_MODE 7
-# endif
-#endif
-
-#if !defined(SERIAL_USART_DRIVER)
-# define SERIAL_USART_DRIVER UARTD1
-#endif
-
-#if !defined(SERIAL_USART_TX_PIN)
-# define SERIAL_USART_TX_PIN A9
-#endif
-
-#if !defined(SERIAL_USART_RX_PIN)
-# define SERIAL_USART_RX_PIN A10
-#endif
-
-#define SIGNAL_HANDSHAKE_RECEIVED 0x1
-
-void handle_transactions_slave(uint8_t sstd_index);
-static void receive_transaction_handshake(UARTDriver* uartp, uint16_t received_handshake);
-
-/*
- * UART driver configuration structure. We use the blocking DMA enabled API and
- * the rxchar callback to receive handshake tokens but only on the slave halve.
- */
-// clang-format off
-static UARTConfig uart_config = {
- .txend1_cb = NULL,
- .txend2_cb = NULL,
- .rxend_cb = NULL,
- .rxchar_cb = NULL,
- .rxerr_cb = NULL,
- .timeout_cb = NULL,
- .speed = (SERIAL_USART_SPEED),
- .cr1 = (SERIAL_USART_CR1),
- .cr2 = (SERIAL_USART_CR2),
- .cr3 = (SERIAL_USART_CR3)
-};
-// clang-format on
-
-static SSTD_t* Transaction_table = NULL;
-static uint8_t Transaction_table_size = 0;
-static atomic_uint_least8_t handshake = 0xFF;
-static thread_reference_t tp_target = NULL;
-
-/*
- * This callback is invoked when a character is received but the application
- * was not ready to receive it, the character is passed as parameter.
- * Receive transaction table index from initiator, which doubles as basic handshake token. */
-static void receive_transaction_handshake(UARTDriver* uartp, uint16_t received_handshake) {
- /* Check if received handshake is not a valid transaction id.
- * Please note that we can still catch a seemingly valid handshake
- * i.e. a byte from a ongoing transfer which is in the allowed range.
- * So this check mainly prevents any obviously wrong handshakes and
- * subsequent wakeups of the receiving thread, which is a costly operation. */
- if (received_handshake > Transaction_table_size) {
- return;
- }
-
- handshake = (uint8_t)received_handshake;
- chSysLockFromISR();
- /* Wakeup receiving thread to start a transaction. */
- chEvtSignalI(tp_target, (eventmask_t)SIGNAL_HANDSHAKE_RECEIVED);
- chSysUnlockFromISR();
-}
-
-__attribute__((weak)) void usart_init(void) {
-#if defined(USE_GPIOV1)
- palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_STM32_ALTERNATE_PUSHPULL);
- palSetLineMode(SERIAL_USART_RX_PIN, PAL_MODE_INPUT);
-#else
- palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_ALTERNATE(SERIAL_USART_TX_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
- palSetLineMode(SERIAL_USART_RX_PIN, PAL_MODE_ALTERNATE(SERIAL_USART_RX_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
-#endif
-}
-
-/*
- * This thread runs on the slave half and reacts to transactions initiated from the master.
- */
-static THD_WORKING_AREA(waSlaveThread, 1024);
-static THD_FUNCTION(SlaveThread, arg) {
- (void)arg;
- chRegSetThreadName("slave_usart_tx_rx");
-
- while (true) {
- /* We sleep as long as there is no handshake waiting for us. */
- chEvtWaitAny((eventmask_t)SIGNAL_HANDSHAKE_RECEIVED);
- handle_transactions_slave(handshake);
- }
-}
-
-void soft_serial_target_init(SSTD_t* const sstd_table, int sstd_table_size) {
- Transaction_table = sstd_table;
- Transaction_table_size = (uint8_t)sstd_table_size;
- usart_init();
-
-#if defined(USART_REMAP)
- USART_REMAP;
-#endif
-
- tp_target = chThdCreateStatic(waSlaveThread, sizeof(waSlaveThread), HIGHPRIO, SlaveThread, NULL);
-
- // Start receiving handshake tokens on slave halve
- uart_config.rxchar_cb = receive_transaction_handshake;
- uartStart(&SERIAL_USART_DRIVER, &uart_config);
-}
-
-/**
- * @brief React to transactions started by the master.
- * This version uses duplex send and receive usart pheriphals and DMA backed transfers.
- */
-void inline handle_transactions_slave(uint8_t sstd_index) {
- size_t buffer_size = 0;
- msg_t msg = 0;
- SSTD_t* trans = &Transaction_table[sstd_index];
-
- /* Send back the handshake which is XORed as a simple checksum,
- to signal that the slave is ready to receive possible transaction buffers */
- sstd_index ^= HANDSHAKE_MAGIC;
- buffer_size = (size_t)sizeof(sstd_index);
- msg = uartSendTimeout(&SERIAL_USART_DRIVER, &buffer_size, &sstd_index, TIME_MS2I(SERIAL_USART_TIMEOUT));
-
- if (msg != MSG_OK) {
- if (trans->status) {
- *trans->status = TRANSACTION_NO_RESPONSE;
- }
- return;
- }
-
- /* Receive transaction buffer from the master. If this transaction requires it.*/
- buffer_size = (size_t)trans->initiator2target_buffer_size;
- if (buffer_size) {
- msg = uartReceiveTimeout(&SERIAL_USART_DRIVER, &buffer_size, trans->initiator2target_buffer, TIME_MS2I(SERIAL_USART_TIMEOUT));
- if (msg != MSG_OK) {
- if (trans->status) {
- *trans->status = TRANSACTION_NO_RESPONSE;
- }
- return;
- }
- }
-
- /* Send transaction buffer to the master. If this transaction requires it. */
- buffer_size = (size_t)trans->target2initiator_buffer_size;
- if (buffer_size) {
- msg = uartSendFullTimeout(&SERIAL_USART_DRIVER, &buffer_size, trans->target2initiator_buffer, TIME_MS2I(SERIAL_USART_TIMEOUT));
- if (msg != MSG_OK) {
- if (trans->status) {
- *trans->status = TRANSACTION_NO_RESPONSE;
- }
- return;
- }
- }
-
- if (trans->status) {
- *trans->status = TRANSACTION_ACCEPTED;
- }
-}
-
-void soft_serial_initiator_init(SSTD_t* const sstd_table, int sstd_table_size) {
- Transaction_table = sstd_table;
- Transaction_table_size = (uint8_t)sstd_table_size;
- usart_init();
-
-#if defined(SERIAL_USART_PIN_SWAP)
- uart_config.cr2 |= USART_CR2_SWAP; // master has swapped TX/RX pins
-#endif
-
-#if defined(USART_REMAP)
- USART_REMAP;
-#endif
-
- uartStart(&SERIAL_USART_DRIVER, &uart_config);
-}
-
-/**
- * @brief Start transaction from the master to the slave.
- * This version uses duplex send and receive usart pheriphals and DMA backed transfers.
- *
- * @param index Transaction Table index of the transaction to start.
- * @return int TRANSACTION_NO_RESPONSE in case of Timeout.
- * TRANSACTION_TYPE_ERROR in case of invalid transaction index.
- * TRANSACTION_END in case of success.
- */
-#if !defined(SERIAL_USE_MULTI_TRANSACTION)
-int soft_serial_transaction(void) {
- uint8_t sstd_index = 0;
-#else
-int soft_serial_transaction(int index) {
- uint8_t sstd_index = index;
-#endif
-
- if (sstd_index > Transaction_table_size) {
- return TRANSACTION_TYPE_ERROR;
- }
-
- SSTD_t* const trans = &Transaction_table[sstd_index];
- msg_t msg = 0;
- size_t buffer_size = (size_t)sizeof(sstd_index);
-
- /* Send transaction table index to the slave, which doubles as basic handshake token. */
- uartSendFullTimeout(&SERIAL_USART_DRIVER, &buffer_size, &sstd_index, TIME_MS2I(SERIAL_USART_TIMEOUT));
-
- uint8_t sstd_index_shake = 0xFF;
- buffer_size = (size_t)sizeof(sstd_index_shake);
-
- /* Receive the handshake token from the slave. The token was XORed by the slave as a simple checksum.
- If the tokens match, the master will start to send and receive possible transaction buffers. */
- msg = uartReceiveTimeout(&SERIAL_USART_DRIVER, &buffer_size, &sstd_index_shake, TIME_MS2I(SERIAL_USART_TIMEOUT));
- if (msg != MSG_OK || (sstd_index_shake != (sstd_index ^ HANDSHAKE_MAGIC))) {
- dprintln("USART: Handshake Failed");
- return TRANSACTION_NO_RESPONSE;
- }
-
- /* Send transaction buffer to the slave. If this transaction requires it. */
- buffer_size = (size_t)trans->initiator2target_buffer_size;
- if (buffer_size) {
- msg = uartSendFullTimeout(&SERIAL_USART_DRIVER, &buffer_size, trans->initiator2target_buffer, TIME_MS2I(SERIAL_USART_TIMEOUT));
- if (msg != MSG_OK) {
- dprintln("USART: Send Failed");
- return TRANSACTION_NO_RESPONSE;
- }
- }
-
- /* Receive transaction buffer from the slave. If this transaction requires it. */
- buffer_size = (size_t)trans->target2initiator_buffer_size;
- if (buffer_size) {
- msg = uartReceiveTimeout(&SERIAL_USART_DRIVER, &buffer_size, trans->target2initiator_buffer, TIME_MS2I(SERIAL_USART_TIMEOUT));
- if (msg != MSG_OK) {
- dprintln("USART: Receive Failed");
- return TRANSACTION_NO_RESPONSE;
- }
- }
-
- return TRANSACTION_END;
-}