diff options
Diffstat (limited to 'drivers/avr')
| -rw-r--r-- | drivers/avr/analog.c | 69 | ||||
| -rw-r--r-- | drivers/avr/analog.h | 52 | ||||
| -rw-r--r-- | drivers/avr/glcdfont.c | 276 | ||||
| -rw-r--r-- | drivers/avr/pro_micro.h | 362 | ||||
| -rw-r--r-- | drivers/avr/ssd1306.c | 470 | ||||
| -rw-r--r-- | drivers/avr/ssd1306.h | 17 | ||||
| -rw-r--r-- | drivers/avr/ws2812.c | 342 | ||||
| -rw-r--r-- | drivers/avr/ws2812.h | 91 |
8 files changed, 1679 insertions, 0 deletions
diff --git a/drivers/avr/analog.c b/drivers/avr/analog.c new file mode 100644 index 0000000000..1ec38df75d --- /dev/null +++ b/drivers/avr/analog.c @@ -0,0 +1,69 @@ +/* Copyright 2015 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +// Simple analog to digitial conversion + +#include <avr/io.h> +#include <avr/pgmspace.h> +#include <stdint.h> +#include "analog.h" + + +static uint8_t aref = (1<<REFS0); // default to AREF = Vcc + + +void analogReference(uint8_t mode) +{ + aref = mode & 0xC0; +} + + +// Arduino compatible pin input +int16_t analogRead(uint8_t pin) +{ +#if defined(__AVR_ATmega32U4__) + static const uint8_t PROGMEM pin_to_mux[] = { + 0x00, 0x01, 0x04, 0x05, 0x06, 0x07, + 0x25, 0x24, 0x23, 0x22, 0x21, 0x20}; + if (pin >= 12) return 0; + return adc_read(pgm_read_byte(pin_to_mux + pin)); +#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) + if (pin >= 8) return 0; + return adc_read(pin); +#else + return 0; +#endif +} + +// Mux input +int16_t adc_read(uint8_t mux) +{ +#if defined(__AVR_AT90USB162__) + return 0; +#else + uint8_t low; + + ADCSRA = (1<<ADEN) | ADC_PRESCALER; // enable ADC + ADCSRB = (1<<ADHSM) | (mux & 0x20); // high speed mode + ADMUX = aref | (mux & 0x1F); // configure mux input + ADCSRA = (1<<ADEN) | ADC_PRESCALER | (1<<ADSC); // start the conversion + while (ADCSRA & (1<<ADSC)) ; // wait for result + low = ADCL; // must read LSB first + return (ADCH << 8) | low; // must read MSB only once! +#endif +} + + diff --git a/drivers/avr/analog.h b/drivers/avr/analog.h new file mode 100644 index 0000000000..8d93de7dc2 --- /dev/null +++ b/drivers/avr/analog.h @@ -0,0 +1,52 @@ +/* Copyright 2015 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _analog_h_included__ +#define _analog_h_included__ + +#include <stdint.h> + +void analogReference(uint8_t mode); +int16_t analogRead(uint8_t pin); +int16_t adc_read(uint8_t mux); + +#define ADC_REF_POWER (1<<REFS0) +#define ADC_REF_INTERNAL ((1<<REFS1) | (1<<REFS0)) +#define ADC_REF_EXTERNAL (0) + +// These prescaler values are for high speed mode, ADHSM = 1 +#if F_CPU == 16000000L +#define ADC_PRESCALER ((1<<ADPS2) | (1<<ADPS1)) +#elif F_CPU == 8000000L +#define ADC_PRESCALER ((1<<ADPS2) | (1<<ADPS0)) +#elif F_CPU == 4000000L +#define ADC_PRESCALER ((1<<ADPS2)) +#elif F_CPU == 2000000L +#define ADC_PRESCALER ((1<<ADPS1) | (1<<ADPS0)) +#elif F_CPU == 1000000L +#define ADC_PRESCALER ((1<<ADPS1)) +#else +#define ADC_PRESCALER ((1<<ADPS0)) +#endif + +// some avr-libc versions do not properly define ADHSM +#if defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) +#if !defined(ADHSM) +#define ADHSM (7) +#endif +#endif + +#endif diff --git a/drivers/avr/glcdfont.c b/drivers/avr/glcdfont.c new file mode 100644 index 0000000000..6f88bd23a7 --- /dev/null +++ b/drivers/avr/glcdfont.c @@ -0,0 +1,276 @@ +// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. +// See gfxfont.h for newer custom bitmap font info. + +#ifndef FONT5X7_H +#define FONT5X7_H + +#ifdef __AVR__ + #include <avr/io.h> + #include <avr/pgmspace.h> +#elif defined(ESP8266) + #include <pgmspace.h> +#else + #define PROGMEM +#endif + +// Standard ASCII 5x7 font + +static const unsigned char font[] PROGMEM = { + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, + 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, + 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, + 0x18, 0x3C, 0x7E, 0x3C, 0x18, + 0x1C, 0x57, 0x7D, 0x57, 0x1C, + 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, + 0x00, 0x18, 0x3C, 0x18, 0x00, + 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, + 0x00, 0x18, 0x24, 0x18, 0x00, + 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, + 0x30, 0x48, 0x3A, 0x06, 0x0E, + 0x26, 0x29, 0x79, 0x29, 0x26, + 0x40, 0x7F, 0x05, 0x05, 0x07, + 0x40, 0x7F, 0x05, 0x25, 0x3F, + 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, + 0x7F, 0x3E, 0x1C, 0x1C, 0x08, + 0x08, 0x1C, 0x1C, 0x3E, 0x7F, + 0x14, 0x22, 0x7F, 0x22, 0x14, + 0x5F, 0x5F, 0x00, 0x5F, 0x5F, + 0x06, 0x09, 0x7F, 0x01, 0x7F, + 0x00, 0x66, 0x89, 0x95, 0x6A, + 0x60, 0x60, 0x60, 0x60, 0x60, + 0x94, 0xA2, 0xFF, 0xA2, 0x94, + 0x08, 0x04, 0x7E, 0x04, 0x08, + 0x10, 0x20, 0x7E, 0x20, 0x10, + 0x08, 0x08, 0x2A, 0x1C, 0x08, + 0x08, 0x1C, 0x2A, 0x08, 0x08, + 0x1E, 0x10, 0x10, 0x10, 0x10, + 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, + 0x30, 0x38, 0x3E, 0x38, 0x30, + 0x06, 0x0E, 0x3E, 0x0E, 0x06, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x5F, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x07, 0x00, + 0x14, 0x7F, 0x14, 0x7F, 0x14, + 0x24, 0x2A, 0x7F, 0x2A, 0x12, + 0x23, 0x13, 0x08, 0x64, 0x62, + 0x36, 0x49, 0x56, 0x20, 0x50, + 0x00, 0x08, 0x07, 0x03, 0x00, + 0x00, 0x1C, 0x22, 0x41, 0x00, + 0x00, 0x41, 0x22, 0x1C, 0x00, + 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, + 0x08, 0x08, 0x3E, 0x08, 0x08, + 0x00, 0x80, 0x70, 0x30, 0x00, + 0x08, 0x08, 0x08, 0x08, 0x08, + 0x00, 0x00, 0x60, 0x60, 0x00, + 0x20, 0x10, 0x08, 0x04, 0x02, + 0x3E, 0x51, 0x49, 0x45, 0x3E, + 0x00, 0x42, 0x7F, 0x40, 0x00, + 0x72, 0x49, 0x49, 0x49, 0x46, + 0x21, 0x41, 0x49, 0x4D, 0x33, + 0x18, 0x14, 0x12, 0x7F, 0x10, + 0x27, 0x45, 0x45, 0x45, 0x39, + 0x3C, 0x4A, 0x49, 0x49, 0x31, + 0x41, 0x21, 0x11, 0x09, 0x07, + 0x36, 0x49, 0x49, 0x49, 0x36, + 0x46, 0x49, 0x49, 0x29, 0x1E, + 0x00, 0x00, 0x14, 0x00, 0x00, + 0x00, 0x40, 0x34, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x41, + 0x14, 0x14, 0x14, 0x14, 0x14, + 0x00, 0x41, 0x22, 0x14, 0x08, + 0x02, 0x01, 0x59, 0x09, 0x06, + 0x3E, 0x41, 0x5D, 0x59, 0x4E, + 0x7C, 0x12, 0x11, 0x12, 0x7C, + 0x7F, 0x49, 0x49, 0x49, 0x36, + 0x3E, 0x41, 0x41, 0x41, 0x22, + 0x7F, 0x41, 0x41, 0x41, 0x3E, + 0x7F, 0x49, 0x49, 0x49, 0x41, + 0x7F, 0x09, 0x09, 0x09, 0x01, + 0x3E, 0x41, 0x41, 0x51, 0x73, + 0x7F, 0x08, 0x08, 0x08, 0x7F, + 0x00, 0x41, 0x7F, 0x41, 0x00, + 0x20, 0x40, 0x41, 0x3F, 0x01, + 0x7F, 0x08, 0x14, 0x22, 0x41, + 0x7F, 0x40, 0x40, 0x40, 0x40, + 0x7F, 0x02, 0x1C, 0x02, 0x7F, + 0x7F, 0x04, 0x08, 0x10, 0x7F, + 0x3E, 0x41, 0x41, 0x41, 0x3E, + 0x7F, 0x09, 0x09, 0x09, 0x06, + 0x3E, 0x41, 0x51, 0x21, 0x5E, + 0x7F, 0x09, 0x19, 0x29, 0x46, + 0x26, 0x49, 0x49, 0x49, 0x32, + 0x03, 0x01, 0x7F, 0x01, 0x03, + 0x3F, 0x40, 0x40, 0x40, 0x3F, + 0x1F, 0x20, 0x40, 0x20, 0x1F, + 0x3F, 0x40, 0x38, 0x40, 0x3F, + 0x63, 0x14, 0x08, 0x14, 0x63, + 0x03, 0x04, 0x78, 0x04, 0x03, + 0x61, 0x59, 0x49, 0x4D, 0x43, + 0x00, 0x7F, 0x41, 0x41, 0x41, + 0x02, 0x04, 0x08, 0x10, 0x20, + 0x00, 0x41, 0x41, 0x41, 0x7F, + 0x04, 0x02, 0x01, 0x02, 0x04, + 0x40, 0x40, 0x40, 0x40, 0x40, + 0x00, 0x03, 0x07, 0x08, 0x00, + 0x20, 0x54, 0x54, 0x78, 0x40, + 0x7F, 0x28, 0x44, 0x44, 0x38, + 0x38, 0x44, 0x44, 0x44, 0x28, + 0x38, 0x44, 0x44, 0x28, 0x7F, + 0x38, 0x54, 0x54, 0x54, 0x18, + 0x00, 0x08, 0x7E, 0x09, 0x02, + 0x18, 0xA4, 0xA4, 0x9C, 0x78, + 0x7F, 0x08, 0x04, 0x04, 0x78, + 0x00, 0x44, 0x7D, 0x40, 0x00, + 0x20, 0x40, 0x40, 0x3D, 0x00, + 0x7F, 0x10, 0x28, 0x44, 0x00, + 0x00, 0x41, 0x7F, 0x40, 0x00, + 0x7C, 0x04, 0x78, 0x04, 0x78, + 0x7C, 0x08, 0x04, 0x04, 0x78, + 0x38, 0x44, 0x44, 0x44, 0x38, + 0xFC, 0x18, 0x24, 0x24, 0x18, + 0x18, 0x24, 0x24, 0x18, 0xFC, + 0x7C, 0x08, 0x04, 0x04, 0x08, + 0x48, 0x54, 0x54, 0x54, 0x24, + 0x04, 0x04, 0x3F, 0x44, 0x24, + 0x3C, 0x40, 0x40, 0x20, 0x7C, + 0x1C, 0x20, 0x40, 0x20, 0x1C, + 0x3C, 0x40, 0x30, 0x40, 0x3C, + 0x44, 0x28, 0x10, 0x28, 0x44, + 0x4C, 0x90, 0x90, 0x90, 0x7C, + 0x44, 0x64, 0x54, 0x4C, 0x44, + 0x00, 0x08, 0x36, 0x41, 0x00, + 0x00, 0x00, 0x77, 0x00, 0x00, + 0x00, 0x41, 0x36, 0x08, 0x00, + 0x02, 0x01, 0x02, 0x04, 0x02, + 0x3C, 0x26, 0x23, 0x26, 0x3C, + 0x1E, 0xA1, 0xA1, 0x61, 0x12, + 0x3A, 0x40, 0x40, 0x20, 0x7A, + 0x38, 0x54, 0x54, 0x55, 0x59, + 0x21, 0x55, 0x55, 0x79, 0x41, + 0x22, 0x54, 0x54, 0x78, 0x42, // a-umlaut + 0x21, 0x55, 0x54, 0x78, 0x40, + 0x20, 0x54, 0x55, 0x79, 0x40, + 0x0C, 0x1E, 0x52, 0x72, 0x12, + 0x39, 0x55, 0x55, 0x55, 0x59, + 0x39, 0x54, 0x54, 0x54, 0x59, + 0x39, 0x55, 0x54, 0x54, 0x58, + 0x00, 0x00, 0x45, 0x7C, 0x41, + 0x00, 0x02, 0x45, 0x7D, 0x42, + 0x00, 0x01, 0x45, 0x7C, 0x40, + 0x7D, 0x12, 0x11, 0x12, 0x7D, // A-umlaut + 0xF0, 0x28, 0x25, 0x28, 0xF0, + 0x7C, 0x54, 0x55, 0x45, 0x00, + 0x20, 0x54, 0x54, 0x7C, 0x54, + 0x7C, 0x0A, 0x09, 0x7F, 0x49, + 0x32, 0x49, 0x49, 0x49, 0x32, + 0x3A, 0x44, 0x44, 0x44, 0x3A, // o-umlaut + 0x32, 0x4A, 0x48, 0x48, 0x30, + 0x3A, 0x41, 0x41, 0x21, 0x7A, + 0x3A, 0x42, 0x40, 0x20, 0x78, + 0x00, 0x9D, 0xA0, 0xA0, 0x7D, + 0x3D, 0x42, 0x42, 0x42, 0x3D, // O-umlaut + 0x3D, 0x40, 0x40, 0x40, 0x3D, + 0x3C, 0x24, 0xFF, 0x24, 0x24, + 0x48, 0x7E, 0x49, 0x43, 0x66, + 0x2B, 0x2F, 0xFC, 0x2F, 0x2B, + 0xFF, 0x09, 0x29, 0xF6, 0x20, + 0xC0, 0x88, 0x7E, 0x09, 0x03, + 0x20, 0x54, 0x54, 0x79, 0x41, + 0x00, 0x00, 0x44, 0x7D, 0x41, + 0x30, 0x48, 0x48, 0x4A, 0x32, + 0x38, 0x40, 0x40, 0x22, 0x7A, + 0x00, 0x7A, 0x0A, 0x0A, 0x72, + 0x7D, 0x0D, 0x19, 0x31, 0x7D, + 0x26, 0x29, 0x29, 0x2F, 0x28, + 0x26, 0x29, 0x29, 0x29, 0x26, + 0x30, 0x48, 0x4D, 0x40, 0x20, + 0x38, 0x08, 0x08, 0x08, 0x08, + 0x08, 0x08, 0x08, 0x08, 0x38, + 0x2F, 0x10, 0xC8, 0xAC, 0xBA, + 0x2F, 0x10, 0x28, 0x34, 0xFA, + 0x00, 0x00, 0x7B, 0x00, 0x00, + 0x08, 0x14, 0x2A, 0x14, 0x22, + 0x22, 0x14, 0x2A, 0x14, 0x08, + 0x55, 0x00, 0x55, 0x00, 0x55, // #176 (25% block) missing in old code + 0xAA, 0x55, 0xAA, 0x55, 0xAA, // 50% block + 0xFF, 0x55, 0xFF, 0x55, 0xFF, // 75% block + 0x00, 0x00, 0x00, 0xFF, 0x00, + 0x10, 0x10, 0x10, 0xFF, 0x00, + 0x14, 0x14, 0x14, 0xFF, 0x00, + 0x10, 0x10, 0xFF, 0x00, 0xFF, + 0x10, 0x10, 0xF0, 0x10, 0xF0, + 0x14, 0x14, 0x14, 0xFC, 0x00, + 0x14, 0x14, 0xF7, 0x00, 0xFF, + 0x00, 0x00, 0xFF, 0x00, 0xFF, + 0x14, 0x14, 0xF4, 0x04, 0xFC, + 0x14, 0x14, 0x17, 0x10, 0x1F, + 0x10, 0x10, 0x1F, 0x10, 0x1F, + 0x14, 0x14, 0x14, 0x1F, 0x00, + 0x10, 0x10, 0x10, 0xF0, 0x00, + 0x00, 0x00, 0x00, 0x1F, 0x10, + 0x10, 0x10, 0x10, 0x1F, 0x10, + 0x10, 0x10, 0x10, 0xF0, 0x10, + 0x00, 0x00, 0x00, 0xFF, 0x10, + 0x10, 0x10, 0x10, 0x10, 0x10, + 0x10, 0x10, 0x10, 0xFF, 0x10, + 0x00, 0x00, 0x00, 0xFF, 0x14, + 0x00, 0x00, 0xFF, 0x00, 0xFF, + 0x00, 0x00, 0x1F, 0x10, 0x17, + 0x00, 0x00, 0xFC, 0x04, 0xF4, + 0x14, 0x14, 0x17, 0x10, 0x17, + 0x14, 0x14, 0xF4, 0x04, 0xF4, + 0x00, 0x00, 0xFF, 0x00, 0xF7, + 0x14, 0x14, 0x14, 0x14, 0x14, + 0x14, 0x14, 0xF7, 0x00, 0xF7, + 0x14, 0x14, 0x14, 0x17, 0x14, + 0x10, 0x10, 0x1F, 0x10, 0x1F, + 0x14, 0x14, 0x14, 0xF4, 0x14, + 0x10, 0x10, 0xF0, 0x10, 0xF0, + 0x00, 0x00, 0x1F, 0x10, 0x1F, + 0x00, 0x00, 0x00, 0x1F, 0x14, + 0x00, 0x00, 0x00, 0xFC, 0x14, + 0x00, 0x00, 0xF0, 0x10, 0xF0, + 0x10, 0x10, 0xFF, 0x10, 0xFF, + 0x14, 0x14, 0x14, 0xFF, 0x14, + 0x10, 0x10, 0x10, 0x1F, 0x00, + 0x00, 0x00, 0x00, 0xF0, 0x10, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, + 0xFF, 0xFF, 0xFF, 0x00, 0x00, + 0x00, 0x00, 0x00, 0xFF, 0xFF, + 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, + 0x38, 0x44, 0x44, 0x38, 0x44, + 0xFC, 0x4A, 0x4A, 0x4A, 0x34, // sharp-s or beta + 0x7E, 0x02, 0x02, 0x06, 0x06, + 0x02, 0x7E, 0x02, 0x7E, 0x02, + 0x63, 0x55, 0x49, 0x41, 0x63, + 0x38, 0x44, 0x44, 0x3C, 0x04, + 0x40, 0x7E, 0x20, 0x1E, 0x20, + 0x06, 0x02, 0x7E, 0x02, 0x02, + 0x99, 0xA5, 0xE7, 0xA5, 0x99, + 0x1C, 0x2A, 0x49, 0x2A, 0x1C, + 0x4C, 0x72, 0x01, 0x72, 0x4C, + 0x30, 0x4A, 0x4D, 0x4D, 0x30, + 0x30, 0x48, 0x78, 0x48, 0x30, + 0xBC, 0x62, 0x5A, 0x46, 0x3D, + 0x3E, 0x49, 0x49, 0x49, 0x00, + 0x7E, 0x01, 0x01, 0x01, 0x7E, + 0x2A, 0x2A, 0x2A, 0x2A, 0x2A, + 0x44, 0x44, 0x5F, 0x44, 0x44, + 0x40, 0x51, 0x4A, 0x44, 0x40, + 0x40, 0x44, 0x4A, 0x51, 0x40, + 0x00, 0x00, 0xFF, 0x01, 0x03, + 0xE0, 0x80, 0xFF, 0x00, 0x00, + 0x08, 0x08, 0x6B, 0x6B, 0x08, + 0x36, 0x12, 0x36, 0x24, 0x36, + 0x06, 0x0F, 0x09, 0x0F, 0x06, + 0x00, 0x00, 0x18, 0x18, 0x00, + 0x00, 0x00, 0x10, 0x10, 0x00, + 0x30, 0x40, 0xFF, 0x01, 0x01, + 0x00, 0x1F, 0x01, 0x01, 0x1E, + 0x00, 0x19, 0x1D, 0x17, 0x12, + 0x00, 0x3C, 0x3C, 0x3C, 0x3C, + 0x00, 0x00, 0x00, 0x00, 0x00 // #255 NBSP +}; +#endif // FONT5X7_H diff --git a/drivers/avr/pro_micro.h b/drivers/avr/pro_micro.h new file mode 100644 index 0000000000..f9e7ed75d9 --- /dev/null +++ b/drivers/avr/pro_micro.h @@ -0,0 +1,362 @@ +/* + pins_arduino.h - Pin definition functions for Arduino + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2007 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ +*/ + +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include <avr/pgmspace.h> + +// Workaround for wrong definitions in "iom32u4.h". +// This should be fixed in the AVR toolchain. +#undef UHCON +#undef UHINT +#undef UHIEN +#undef UHADDR +#undef UHFNUM +#undef UHFNUML +#undef UHFNUMH +#undef UHFLEN +#undef UPINRQX +#undef UPINTX +#undef UPNUM +#undef UPRST +#undef UPCONX +#undef UPCFG0X +#undef UPCFG1X +#undef UPSTAX +#undef UPCFG2X +#undef UPIENX +#undef UPDATX +#undef TCCR2A +#undef WGM20 +#undef WGM21 +#undef COM2B0 +#undef COM2B1 +#undef COM2A0 +#undef COM2A1 +#undef TCCR2B +#undef CS20 +#undef CS21 +#undef CS22 +#undef WGM22 +#undef FOC2B +#undef FOC2A +#undef TCNT2 +#undef TCNT2_0 +#undef TCNT2_1 +#undef TCNT2_2 +#undef TCNT2_3 +#undef TCNT2_4 +#undef TCNT2_5 +#undef TCNT2_6 +#undef TCNT2_7 +#undef OCR2A +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 +#undef OCR2B +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 + +#define NUM_DIGITAL_PINS 30 +#define NUM_ANALOG_INPUTS 12 + +#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0) +#define TXLED0 PORTD |= (1<<5) +#define TXLED1 PORTD &= ~(1<<5) +#define RXLED0 PORTB |= (1<<0) +#define RXLED1 PORTB &= ~(1<<0) + +static const uint8_t SDA = 2; +static const uint8_t SCL = 3; +#define LED_BUILTIN 13 + +// Map SPI port to 'new' pins D14..D17 +static const uint8_t SS = 17; +static const uint8_t MOSI = 16; +static const uint8_t MISO = 14; +static const uint8_t SCK = 15; + +// Mapping of analog pins as digital I/O +// A6-A11 share with digital pins +static const uint8_t ADC0 = 18; +static const uint8_t ADC1 = 19; +static const uint8_t ADC2 = 20; +static const uint8_t ADC3 = 21; +static const uint8_t ADC4 = 22; +static const uint8_t ADC5 = 23; +static const uint8_t ADC6 = 24; // D4 +static const uint8_t ADC7 = 25; // D6 +static const uint8_t ADC8 = 26; // D8 +static const uint8_t ADC9 = 27; // D9 +static const uint8_t ADC10 = 28; // D10 +static const uint8_t ADC11 = 29; // D12 + +#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0)) +#define digitalPinToPCICRbit(p) 0 +#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0)) +#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4)))))) + +// __AVR_ATmega32U4__ has an unusual mapping of pins to channels +extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; +#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) + +#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) + +#ifdef ARDUINO_MAIN + +// On the Arduino board, digital pins are also used +// for the analog output (software PWM). Analog input +// pins are a separate set. + +// ATMEL ATMEGA32U4 / ARDUINO LEONARDO +// +// D0 PD2 RXD1/INT2 +// D1 PD3 TXD1/INT3 +// D2 PD1 SDA SDA/INT1 +// D3# PD0 PWM8/SCL OC0B/SCL/INT0 +// D4 A6 PD4 ADC8 +// D5# PC6 ??? OC3A/#OC4A +// D6# A7 PD7 FastPWM #OC4D/ADC10 +// D7 PE6 INT6/AIN0 +// +// D8 A8 PB4 ADC11/PCINT4 +// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5 +// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6 +// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7 +// D12 A11 PD6 T1/#OC4D/ADC9 +// D13# PC7 PWM10 CLK0/OC4A +// +// A0 D18 PF7 ADC7 +// A1 D19 PF6 ADC6 +// A2 D20 PF5 ADC5 +// A3 D21 PF4 ADC4 +// A4 D22 PF1 ADC1 +// A5 D23 PF0 ADC0 +// +// New pins D14..D17 to map SPI port to digital pins +// +// MISO D14 PB3 MISO,PCINT3 +// SCK D15 PB1 SCK,PCINT1 +// MOSI D16 PB2 MOSI,PCINT2 +// SS D17 PB0 RXLED,SS/PCINT0 +// +// Connected LEDs on board for TX and RX +// TXLED D24 PD5 XCK1 +// RXLED D17 PB0 +// HWB PE2 HWB + +// these arrays map port names (e.g. port B) to the +// appropriate addresses for various functions (e.g. reading +// and writing) +const uint16_t PROGMEM port_to_mode_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &DDRB, + (uint16_t) &DDRC, + (uint16_t) &DDRD, + (uint16_t) &DDRE, + (uint16_t) &DDRF, +}; + +const uint16_t PROGMEM port_to_output_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &PORTB, + (uint16_t) &PORTC, + (uint16_t) &PORTD, + (uint16_t) &PORTE, + (uint16_t) &PORTF, +}; + +const uint16_t PROGMEM port_to_input_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &PINB, + (uint16_t) &PINC, + (uint16_t) &PIND, + (uint16_t) &PINE, + (uint16_t) &PINF, +}; + +const uint8_t PROGMEM digital_pin_to_port_PGM[] = { + PD, // D0 - PD2 + PD, // D1 - PD3 + PD, // D2 - PD1 + PD, // D3 - PD0 + PD, // D4 - PD4 + PC, // D5 - PC6 + PD, // D6 - PD7 + PE, // D7 - PE6 + + PB, // D8 - PB4 + PB, // D9 - PB5 + PB, // D10 - PB6 + PB, // D11 - PB7 + PD, // D12 - PD6 + PC, // D13 - PC7 + + PB, // D14 - MISO - PB3 + PB, // D15 - SCK - PB1 + PB, // D16 - MOSI - PB2 + PB, // D17 - SS - PB0 + + PF, // D18 - A0 - PF7 + PF, // D19 - A1 - PF6 + PF, // D20 - A2 - PF5 + PF, // D21 - A3 - PF4 + PF, // D22 - A4 - PF1 + PF, // D23 - A5 - PF0 + + PD, // D24 - PD5 + PD, // D25 / D6 - A7 - PD7 + PB, // D26 / D8 - A8 - PB4 + PB, // D27 / D9 - A9 - PB5 + PB, // D28 / D10 - A10 - PB6 + PD, // D29 / D12 - A11 - PD6 +}; + +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { + _BV(2), // D0 - PD2 + _BV(3), // D1 - PD3 + _BV(1), // D2 - PD1 + _BV(0), // D3 - PD0 + _BV(4), // D4 - PD4 + _BV(6), // D5 - PC6 + _BV(7), // D6 - PD7 + _BV(6), // D7 - PE6 + + _BV(4), // D8 - PB4 + _BV(5), // D9 - PB5 + _BV(6), // D10 - PB6 + _BV(7), // D11 - PB7 + _BV(6), // D12 - PD6 + _BV(7), // D13 - PC7 + + _BV(3), // D14 - MISO - PB3 + _BV(1), // D15 - SCK - PB1 + _BV(2), // D16 - MOSI - PB2 + _BV(0), // D17 - SS - PB0 + + _BV(7), // D18 - A0 - PF7 + _BV(6), // D19 - A1 - PF6 + _BV(5), // D20 - A2 - PF5 + _BV(4), // D21 - A3 - PF4 + _BV(1), // D22 - A4 - PF1 + _BV(0), // D23 - A5 - PF0 + + _BV(5), // D24 - PD5 + _BV(7), // D25 / D6 - A7 - PD7 + _BV(4), // D26 / D8 - A8 - PB4 + _BV(5), // D27 / D9 - A9 - PB5 + _BV(6), // D28 / D10 - A10 - PB6 + _BV(6), // D29 / D12 - A11 - PD6 +}; + +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + TIMER0B, /* 3 */ + NOT_ON_TIMER, + TIMER3A, /* 5 */ + TIMER4D, /* 6 */ + NOT_ON_TIMER, + + NOT_ON_TIMER, + TIMER1A, /* 9 */ + TIMER1B, /* 10 */ + TIMER0A, /* 11 */ + + NOT_ON_TIMER, + TIMER4A, /* 13 */ + + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, +}; + +const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { + 7, // A0 PF7 ADC7 + 6, // A1 PF6 ADC6 + 5, // A2 PF5 ADC5 + 4, // A3 PF4 ADC4 + 1, // A4 PF1 ADC1 + 0, // A5 PF0 ADC0 + 8, // A6 D4 PD4 ADC8 + 10, // A7 D6 PD7 ADC10 + 11, // A8 D8 PB4 ADC11 + 12, // A9 D9 PB5 ADC12 + 13, // A10 D10 PB6 ADC13 + 9 // A11 D12 PD6 ADC9 +}; + +#endif /* ARDUINO_MAIN */ + +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_USBVIRTUAL Serial +#define SERIAL_PORT_HARDWARE Serial1 +#define SERIAL_PORT_HARDWARE_OPEN Serial1 + +#endif /* Pins_Arduino_h */ diff --git a/drivers/avr/ssd1306.c b/drivers/avr/ssd1306.c new file mode 100644 index 0000000000..f9312d2dc1 --- /dev/null +++ b/drivers/avr/ssd1306.c @@ -0,0 +1,470 @@ +#ifdef SSD1306OLED + +#include "ssd1306.h" +#include "config.h" +#include "i2c.h" +#include <string.h> +#include "print.h" +#include "lets_split.h" +#include "glcdfont.c" +#ifdef ADAFRUIT_BLE_ENABLE +#include "adafruit_ble.h" +#endif +#ifdef PROTOCOL_LUFA +#include "lufa.h" +#endif +#include "sendchar.h" +#include "pincontrol.h" + +//assign the right code to your layers +#define _BASE 0 +#define _LOWER 8 +#define _RAISE 16 +#define _FNLAYER 64 +#define _NUMLAY 128 +#define _NLOWER 136 +#define _NFNLAYER 192 +#define _MOUSECURSOR 256 +#define _ADJUST 65560 + +// Set this to 1 to help diagnose early startup problems +// when testing power-on with ble. Turn it off otherwise, +// as the latency of printing most of the debug info messes +// with the matrix scan, causing keys to drop. +#define DEBUG_TO_SCREEN 0 + +// Controls the SSD1306 128x32 OLED display via i2c + +#define i2cAddress 0x3C + +#define DisplayHeight 32 +#define DisplayWidth 128 + +#define FontHeight 8 +#define FontWidth 6 + +#define MatrixRows (DisplayHeight / FontHeight) +#define MatrixCols (DisplayWidth / FontWidth) + +struct CharacterMatrix { + uint8_t display[MatrixRows][MatrixCols]; + uint8_t *cursor; + bool dirty; +}; + +static struct CharacterMatrix display; +//static uint16_t last_battery_update; +//static uint32_t vbat; +//#define BatteryUpdateInterval 10000 /* milliseconds */ +#define ScreenOffInterval 300000 /* milliseconds */ +#if DEBUG_TO_SCREEN +static uint8_t displaying; +#endif +static uint16_t last_flush; + +enum ssd1306_cmds { + DisplayOff = 0xAE, + DisplayOn = 0xAF, + + SetContrast = 0x81, + DisplayAllOnResume = 0xA4, + + DisplayAllOn = 0xA5, + NormalDisplay = 0xA6, + InvertDisplay = 0xA7, + SetDisplayOffset = 0xD3, + SetComPins = 0xda, + SetVComDetect = 0xdb, + SetDisplayClockDiv = 0xD5, + SetPreCharge = 0xd9, + SetMultiPlex = 0xa8, + SetLowColumn = 0x00, + SetHighColumn = 0x10, + SetStartLine = 0x40, + + SetMemoryMode = 0x20, + ColumnAddr = 0x21, + PageAddr = 0x22, + + ComScanInc = 0xc0, + ComScanDec = 0xc8, + SegRemap = 0xa0, + SetChargePump = 0x8d, + ExternalVcc = 0x01, + SwitchCapVcc = 0x02, + + ActivateScroll = 0x2f, + DeActivateScroll = 0x2e, + SetVerticalScrollArea = 0xa3, + RightHorizontalScroll = 0x26, + LeftHorizontalScroll = 0x27, + VerticalAndRightHorizontalScroll = 0x29, + VerticalAndLeftHorizontalScroll = 0x2a, +}; + + +// Write command sequence. +// Returns true on success. +static inline bool _send_cmd1(uint8_t cmd) { + bool res = false; + + if (i2c_start_write(i2cAddress)) { + xprintf("failed to start write to %d\n", i2cAddress); + goto done; + } + + if (i2c_master_write(0x0 /* command byte follows */)) { + print("failed to write control byte\n"); + + goto done; + } + + if (i2c_master_write(cmd)) { + xprintf("failed to write command %d\n", cmd); + goto done; + } + res = true; +done: + i2c_master_stop(); + return res; +} + +// Write 2-byte command sequence. +// Returns true on success +static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) { + if (!_send_cmd1(cmd)) { + return false; + } + return _send_cmd1(opr); +} + +// Write 3-byte command sequence. +// Returns true on success +static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) { + if (!_send_cmd1(cmd)) { + return false; + } + if (!_send_cmd1(opr1)) { + return false; + } + return _send_cmd1(opr2); +} + +#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;} +#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;} +#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;} + +static void matrix_clear(struct CharacterMatrix *matrix); + +static void clear_display(void) { + matrix_clear(&display); + + // Clear all of the display bits (there can be random noise + // in the RAM on startup) + send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1); + send_cmd3(ColumnAddr, 0, DisplayWidth - 1); + + if (i2c_start_write(i2cAddress)) { + goto done; + } + if (i2c_master_write(0x40)) { + // Data mode + goto done; + } + for (uint8_t row = 0; row < MatrixRows; ++row) { + for (uint8_t col = 0; col < DisplayWidth; ++col) { + i2c_master_write(0); + } + } + + display.dirty = false; + +done: + i2c_master_stop(); +} + +#if DEBUG_TO_SCREEN +#undef sendchar +static int8_t capture_sendchar(uint8_t c) { + sendchar(c); + iota_gfx_write_char(c); + + if (!displaying) { + iota_gfx_flush(); + } + return 0; +} +#endif + +bool iota_gfx_init(void) { + bool success = false; + + send_cmd1(DisplayOff); + send_cmd2(SetDisplayClockDiv, 0x80); + send_cmd2(SetMultiPlex, DisplayHeight - 1); + + send_cmd2(SetDisplayOffset, 0); + + + send_cmd1(SetStartLine | 0x0); + send_cmd2(SetChargePump, 0x14 /* Enable */); + send_cmd2(SetMemoryMode, 0 /* horizontal addressing */); + +/// Flips the display orientation 0 degrees + send_cmd1(SegRemap | 0x1); + send_cmd1(ComScanDec); +/* +// the following Flip the display orientation 180 degrees + send_cmd1(SegRemap); + send_cmd1(ComScanInc); +// end flip */ + send_cmd2(SetComPins, 0x2); + send_cmd2(SetContrast, 0x8f); + send_cmd2(SetPreCharge, 0xf1); + send_cmd2(SetVComDetect, 0x40); + send_cmd1(DisplayAllOnResume); + send_cmd1(NormalDisplay); + send_cmd1(DeActivateScroll); + send_cmd1(DisplayOn); + + send_cmd2(SetContrast, 0); // Dim + + clear_display(); + + success = true; + + iota_gfx_flush(); + +#if DEBUG_TO_SCREEN + print_set_sendchar(capture_sendchar); +#endif + +done: + return success; +} + +bool iota_gfx_off(void) { + bool success = false; + + send_cmd1(DisplayOff); + success = true; + +done: + return success; +} + +bool iota_gfx_on(void) { + bool success = false; + + send_cmd1(DisplayOn); + success = true; + +done: + return success; +} + +static void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) { + *matrix->cursor = c; + ++matrix->cursor; + + if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { + // We went off the end; scroll the display upwards by one line + memmove(&matrix->display[0], &matrix->display[1], + MatrixCols * (MatrixRows - 1)); + matrix->cursor = &matrix->display[MatrixRows - 1][0]; + memset(matrix->cursor, ' ', MatrixCols); + } +} + +static void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) { + matrix->dirty = true; + + if (c == '\n') { + // Clear to end of line from the cursor and then move to the + // start of the next line + uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; + + while (cursor_col++ < MatrixCols) { + matrix_write_char_inner(matrix, ' '); + } + return; + } + + matrix_write_char_inner(matrix, c); +} + +void iota_gfx_write_char(uint8_t c) { + matrix_write_char(&display, c); +} + +static void matrix_write(struct CharacterMatrix *matrix, const char *data) { + const char *end = data + strlen(data); + while (data < end) { + matrix_write_char(matrix, *data); + ++data; + } +} + +void iota_gfx_write(const char *data) { + matrix_write(&display, data); +} + +static void matrix_write_P(struct CharacterMatrix *matrix, const char *data) { + while (true) { + uint8_t c = pgm_read_byte(data); + if (c == 0) { + return; + } + matrix_write_char(matrix, c); + ++data; + } +} + +void iota_gfx_write_P(const char *data) { + matrix_write_P(&display, data); +} + +static void matrix_clear(struct CharacterMatrix *matrix) { + memset(matrix->display, ' ', sizeof(matrix->display)); + matrix->cursor = &matrix->display[0][0]; + matrix->dirty = true; +} + +void iota_gfx_clear_screen(void) { + matrix_clear(&display); +} + +static void matrix_render(struct CharacterMatrix *matrix) { + last_flush = timer_read(); + iota_gfx_on(); +#if DEBUG_TO_SCREEN + ++displaying; +#endif + + // Move to the home position + send_cmd3(PageAddr, 0, MatrixRows - 1); + send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1); + + if (i2c_start_write(i2cAddress)) { + goto done; |