diff options
Diffstat (limited to 'docs')
80 files changed, 1158 insertions, 694 deletions
diff --git a/docs/_summary.md b/docs/_summary.md index 2f6309e41d..4b528d9967 100644 --- a/docs/_summary.md +++ b/docs/_summary.md @@ -72,6 +72,7 @@ * [Mod-Tap](mod_tap.md) * [Macros](feature_macros.md) * [Mouse Keys](feature_mouse_keys.md) + * [Programmable Button](feature_programmable_button.md) * [Space Cadet Shift](feature_space_cadet.md) * [US ANSI Shifted Keys](keycodes_us_ansi_shifted.md) diff --git a/docs/audio_driver.md b/docs/audio_driver.md index 7cd5a98d9f..81c3390074 100644 --- a/docs/audio_driver.md +++ b/docs/audio_driver.md @@ -57,14 +57,14 @@ This driver needs one Timer per enabled/used DAC channel, to trigger conversion; Additionally, in the board config, you'll want to make changes to enable the DACs, GPT for Timers 6, 7 and 8: -``` c +```c //halconf.h: #define HAL_USE_DAC TRUE #define HAL_USE_GPT TRUE #include_next <halconf.h> ``` -``` c +```c // mcuconf.h: #include_next <mcuconf.h> #undef STM32_DAC_USE_DAC1_CH1 @@ -93,14 +93,14 @@ only needs one timer (GPTD6, Tim6) to trigger the DAC unit to do a conversion; t Additionally, in the board config, you'll want to make changes to enable the DACs, GPT for Timer 6: -``` c +```c //halconf.h: #define HAL_USE_DAC TRUE #define HAL_USE_GPT TRUE #include_next <halconf.h> ``` -``` c +```c // mcuconf.h: #include_next <mcuconf.h> #undef STM32_DAC_USE_DAC1_CH1 @@ -153,7 +153,7 @@ This driver uses the ChibiOS-PWM system to produce a square-wave on specific out The hardware directly toggles the pin via its alternate function. See your MCU's data-sheet for which pin can be driven by what timer - looking for TIMx_CHy and the corresponding alternate function. A configuration example for the STM32F103C8 would be: -``` c +```c //halconf.h: #define HAL_USE_PWM TRUE #define HAL_USE_PAL TRUE @@ -161,7 +161,7 @@ A configuration example for the STM32F103C8 would be: #include_next <halconf.h> ``` -``` c +```c // mcuconf.h: #include_next <mcuconf.h> #undef STM32_PWM_USE_TIM1 @@ -177,7 +177,7 @@ If we now target pin A8, looking through the data-sheet of the STM32F103C8, for - TIM1_CH4 = PA11 with all this information, the configuration would contain these lines: -``` c +```c //config.h: #define AUDIO_PIN A8 #define AUDIO_PWM_DRIVER PWMD1 diff --git a/docs/chibios_upgrade_instructions.md b/docs/chibios_upgrade_instructions.md index 40c2faafcf..b0a71142a3 100644 --- a/docs/chibios_upgrade_instructions.md +++ b/docs/chibios_upgrade_instructions.md @@ -14,10 +14,10 @@ ChibiOS and ChibiOS-Contrib need to be updated in tandem -- the latter has a bra * First time around this will take several hours * Subsequent updates will be incremental only * Tagging example (work out which version first!): - * `git tag -a ver20.3.3 -m ver20.3.3 svn/tags/ver20.3.3` - * `git push qmk ver20.3.3` - * `git tag -a breaking_YYYY_qN -m breaking_YYYY_qN svn/tags/ver20.3.3` - * `git push qmk breaking_YYYY_qN` + * `git tag -a ver20.3.4 -m ver20.3.4 svn/tags/ver20.3.4` + * `git push qmk ver20.3.4` + * `git tag -a develop_YYYY_qN -m develop_YYYY_qN svn/tags/ver20.3.4` + * `git push qmk develop_YYYY_qN` ## Getting ChibiOS-Contrib @@ -30,8 +30,8 @@ ChibiOS and ChibiOS-Contrib need to be updated in tandem -- the latter has a bra * `git checkout chibios-20.3.x` * `git pull --ff-only` * `git push origin chibios-20.3.x` - * `git tag -a breaking_YYYY_qN -m breaking_YYYY_qN chibios-20.3.x` - * `git push origin breaking_YYYY_qN` + * `git tag -a develop_YYYY_qN -m develop_YYYY_qN chibios-20.3.x` + * `git push origin develop_YYYY_qN` ## Updating submodules @@ -42,15 +42,18 @@ ChibiOS and ChibiOS-Contrib need to be updated in tandem -- the latter has a bra * `git checkout -b chibios-version-bump` * `cd lib/chibios` * `git fetch --all --tags --prune` - * `git checkout breaking_YYYY_qN` + * `git checkout develop_YYYY_qN` * `cd ../chibios-contrib` * `git fetch --all --tags --prune` - * `git checkout breaking_YYYY_qN` + * `git checkout develop_YYYY_qN` +* Update ChibiOS configs within QMK + * `cd $QMK_FIRMWARE` + * `./util/chibios_conf_updater.sh` * Build everything * `cd $QMK_FIRMWARE` * `qmk multibuild -j4` * Make sure there are no errors * Push to the repo - * `git commit -am 'Update ChibiOS to XXXXXXXXX'` + * `git commit -am 'Update ChibiOS to 99.9.9'` * `git push --set-upstream origin chibios-version-bump` -* Make a PR to qmk_firmware with the new branch
\ No newline at end of file +* Make a PR to qmk_firmware with the new branch diff --git a/docs/cli_commands.md b/docs/cli_commands.md index 8f5117633f..520da06c41 100644 --- a/docs/cli_commands.md +++ b/docs/cli_commands.md @@ -382,6 +382,33 @@ qmk format-c qmk format-c -b branch_name ``` +## `qmk generate-compilation-database` + +**Usage**: + +``` +qmk generate-compilation-database [-kb KEYBOARD] [-km KEYMAP] +``` + +Creates a `compile_commands.json` file. + +Does your IDE/editor use a language server but doesn't _quite_ find all the necessary include files? Do you hate red squigglies? Do you wish your editor could figure out `#include QMK_KEYBOARD_H`? You might need a [compilation database](https://clang.llvm.org/docs/JSONCompilationDatabase.html)! The qmk tool can build this for you. + +This command needs to know which keyboard and keymap to build. It uses the same configuration options as the `qmk compile` command: arguments, current directory, and config files. + +**Example:** + +``` +$ cd ~/qmk_firmware/keyboards/gh60/satan/keymaps/colemak +$ qmk generate-compilation-database +Ψ Making clean +Ψ Gathering build instructions from make -n gh60/satan:colemak +Ψ Found 50 compile commands +Ψ Writing build database to /Users/you/src/qmk_firmware/compile_commands.json +``` + +Now open your dev environment and live a squiggly-free life. + ## `qmk docs` This command starts a local HTTP server which you can use for browsing or improving the docs. Default port is 8936. diff --git a/docs/cli_development.md b/docs/cli_development.md index 0f4f401b33..62be3b3d8c 100644 --- a/docs/cli_development.md +++ b/docs/cli_development.md @@ -14,7 +14,7 @@ If you intend to maintain keyboards and/or contribute to QMK, you can enable the This will allow you to see all available subcommands. **Note:** You will have to install additional requirements: -```bash +``` python3 -m pip install -r requirements-dev.txt ``` diff --git a/docs/compatible_microcontrollers.md b/docs/compatible_microcontrollers.md index 2bf3b0ebb7..39e9061c20 100644 --- a/docs/compatible_microcontrollers.md +++ b/docs/compatible_microcontrollers.md @@ -27,6 +27,7 @@ You can also use any ARM chip with USB that [ChibiOS](https://www.chibios.org) s * [STM32F103](https://www.st.com/en/microcontrollers-microprocessors/stm32f103.html) * [STM32F303](https://www.st.com/en/microcontrollers-microprocessors/stm32f303.html) * [STM32F401](https://www.st.com/en/microcontrollers-microprocessors/stm32f401.html) + * [STM32F405](https://www.st.com/en/microcontrollers-microprocessors/stm32f405-415.html) * [STM32F407](https://www.st.com/en/microcontrollers-microprocessors/stm32f407-417.html) * [STM32F411](https://www.st.com/en/microcontrollers-microprocessors/stm32f411.html) * [STM32F446](https://www.st.com/en/microcontrollers-microprocessors/stm32f446.html) @@ -42,7 +43,14 @@ You can also use any ARM chip with USB that [ChibiOS](https://www.chibios.org) s * [MKL26Z64](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/kl-series-cortex-m0-plus/kinetis-kl2x-72-96-mhz-usb-ultra-low-power-microcontrollers-mcus-based-on-arm-cortex-m0-plus-core:KL2x) * [MK20DX128](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/k-series-cortex-m4/k2x-usb/kinetis-k20-50-mhz-full-speed-usb-mixed-signal-integration-microcontrollers-based-on-arm-cortex-m4-core:K20_50) * [MK20DX256](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/k-series-cortex-m4/k2x-usb/kinetis-k20-72-mhz-full-speed-usb-mixed-signal-integration-microcontrollers-mcus-based-on-arm-cortex-m4-core:K20_72) + * [MK66FX1M0](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/k-series-cortex-m4/k6x-ethernet/kinetis-k66-180-mhz-dual-high-speed-full-speed-usbs-2mb-flash-microcontrollers-mcus-based-on-arm-cortex-m4-core:K66_180) ## Atmel ATSAM There is limited support for one of Atmel's ATSAM microcontrollers, that being the [ATSAMD51J18A](https://www.microchip.com/wwwproducts/en/ATSAMD51J18A) used by the [Massdrop keyboards](https://github.com/qmk/qmk_firmware/tree/master/keyboards/massdrop). + +## RISC-V + +### GigaDevice + +[ChibiOS-Contrib](https://github.com/ChibiOS/ChibiOS-Contrib) has support for the GigaDevice [GD32VF103 series](https://www.gigadevice.com/products/microcontrollers/gd32/risc-v/mainstream-line/gd32vf103-series/) microcontrollers and provides configurations for the [SiPeed Longan Nano](https://longan.sipeed.com/en/) development board that uses this microcontroller. It is largely pin and feature compatible with STM32F103 and STM32F303 microcontrollers.
\ No newline at end of file diff --git a/docs/config_options.md b/docs/config_options.md index cfbe39f0d3..9f2453b698 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -206,7 +206,7 @@ If you define these options you will enable the associated feature, which may in * `#define TAP_CODE_DELAY 100` * Sets the delay between `register_code` and `unregister_code`, if you're having issues with it registering properly (common on VUSB boards). The value is in milliseconds. * `#define TAP_HOLD_CAPS_DELAY 80` - * Sets the delay for Tap Hold keys (`LT`, `MT`) when using `KC_CAPSLOCK` keycode, as this has some special handling on MacOS. The value is in milliseconds, and defaults to 80 ms if not defined. For macOS, you may want to set this to 200 or higher. + * Sets the delay for Tap Hold keys (`LT`, `MT`) when using `KC_CAPS_LOCK` keycode, as this has some special handling on MacOS. The value is in milliseconds, and defaults to 80 ms if not defined. For macOS, you may want to set this to 200 or higher. * `#define KEY_OVERRIDE_REPEAT_DELAY 500` * Sets the key repeat interval for [key overrides](feature_key_overrides.md). @@ -407,7 +407,7 @@ Use these to enable or disable building certain features. The more you have enab * `MAGIC_ENABLE` * MAGIC actions (BOOTMAGIC without the boot) * `BOOTMAGIC_ENABLE` - * Virtual DIP switch configuration + * Enable Bootmagic Lite * `MOUSEKEY_ENABLE` * Mouse keys * `EXTRAKEY_ENABLE` @@ -446,6 +446,8 @@ Use these to enable or disable building certain features. The more you have enab * Forces the keyboard to wait for a USB connection to be established before it starts up * `NO_USB_STARTUP_CHECK` * Disables usb suspend check after keyboard startup. Usually the keyboard waits for the host to wake it up before any tasks are performed. This is useful for split keyboards as one half will not get a wakeup call but must send commands to the master. +* `DEFERRED_EXEC_ENABLE` + * Enables deferred executor support -- timed delays before callbacks are invoked. See [deferred execution](custom_quantum_functions.md#deferred-execution) for more information. ## USB Endpoint Limitations diff --git a/docs/configurator_default_keymaps.md b/docs/configurator_default_keymaps.md index 30f9fa72f3..d2b14ec411 100644 --- a/docs/configurator_default_keymaps.md +++ b/docs/configurator_default_keymaps.md @@ -20,7 +20,7 @@ Keymaps in this directory require four key-value pairs: Additionally, most keymaps contain a `commit` key. This key is not consumed by the API that back-stops QMK Configurator, but is used by Configurator's maintainers to tell which version of a keymap was used to create the JSON keymap in this repository. The value is the SHA of the last commit to modify a board's default `keymap.c` in the `qmk_firmware` repository. The SHA is found by checking out [the `master` branch of the `qmk/qmk_firmware` repository](https://github.com/qmk/qmk_firmware/tree/master/) and running `git log -1 --pretty=oneline -- keyboards/<keyboard>/keymaps/default/keymap.c` (use `keymap.json` if the keyboard in question has this file instead), which should return something similar to: -```shell +``` f14629ed1cd7c7ec9089604d64f29a99981558e8 Remove/migrate action_get_macro()s from default keymaps (#5625) ``` @@ -31,7 +31,7 @@ In this example, `f14629ed1cd7c7ec9089604d64f29a99981558e8` is the value that sh If one wished to add a default keymap for the H87a by Hineybush, one would run the `git log` command above against the H87a's default keymap in `qmk_firmware`: -```shell +``` user ~/qmk_firmware (master) $ git log -1 --pretty=oneline master -- keyboards/hineybush/h87a/keymaps/default/keymap.c ef8878fba5d3786e3f9c66436da63a560cd36ac9 Hineybush h87a lock indicators (#8237) @@ -46,7 +46,7 @@ Now that we have the commit hash, we need the keymap (edited for readability): const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_all( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SCRL, KC_PAUS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, @@ -74,7 +74,7 @@ The default keymap uses the `LAYOUT_all` macro, so that will be the value of the "layout": "LAYOUT_all", "layers": [ [ - "KC_ESC", "KC_F1", "KC_F2", "KC_F3", "KC_F4", "KC_F5", "KC_F6", "KC_F7", "KC_F8", "KC_F9", "KC_F10", "KC_F11", "KC_F12", "KC_PSCR", "KC_SLCK", "KC_PAUS", + "KC_ESC", "KC_F1", "KC_F2", "KC_F3", "KC_F4", "KC_F5", "KC_F6", "KC_F7", "KC_F8", "KC_F9", "KC_F10", "KC_F11", "KC_F12", "KC_PSCR", "KC_SCRL", "KC_PAUS", "KC_GRV", "KC_1", "KC_2", "KC_3", "KC_4", "KC_5", "KC_6", "KC_7", "KC_8", "KC_9", "KC_0", "KC_MINS", "KC_EQL", "KC_BSPC", "KC_BSPC", "KC_INS", "KC_HOME", "KC_PGUP", "KC_TAB", "KC_Q", "KC_W", "KC_E", "KC_R", "KC_T", "KC_Y", "KC_U", "KC_I", "KC_O", "KC_P", "KC_LBRC", "KC_RBRC", "KC_BSLS", "KC_DEL", "KC_END", "KC_PGDN", "KC_CAPS", "KC_A", "KC_S", "KC_D", "KC_F", "KC_G", "KC_H", "KC_J", "KC_K", "KC_L", "KC_SCLN", "KC_QUOT", "KC_NUHS", "KC_ENT", diff --git a/docs/contributing.md b/docs/contributing.md index 1d68d22d9f..eb033d167f 100644 --- a/docs/contributing.md +++ b/docs/contributing.md @@ -105,7 +105,7 @@ enum my_keycodes { Before opening a pull request, you can preview your changes if you have set up the development environment by running this command from the `qmk_firmware/` folder: - ./bin/qmk docs + |