diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/breaking_changes.md | 1 | ||||
| -rw-r--r-- | docs/data_driven_config.md | 4 | ||||
| -rw-r--r-- | docs/feature_hd44780.md | 84 | ||||
| -rw-r--r-- | docs/feature_led_matrix.md | 4 | ||||
| -rw-r--r-- | docs/feature_rgb_matrix.md | 4 | ||||
| -rw-r--r-- | docs/feature_rgblight.md | 31 | ||||
| -rw-r--r-- | docs/feature_send_string.md | 60 | ||||
| -rw-r--r-- | docs/feature_unicode.md | 8 | ||||
| -rw-r--r-- | docs/getting_started_make_guide.md | 2 | ||||
| -rw-r--r-- | docs/i2c_driver.md | 50 | ||||
| -rw-r--r-- | docs/ja/data_driven_config.md | 4 | ||||
| -rw-r--r-- | docs/keycodes.md | 4 | ||||
| -rw-r--r-- | docs/spi_driver.md | 40 | ||||
| -rw-r--r-- | docs/uart_driver.md | 32 |
14 files changed, 149 insertions, 179 deletions
diff --git a/docs/breaking_changes.md b/docs/breaking_changes.md index e660182c32..f4560b746f 100644 --- a/docs/breaking_changes.md +++ b/docs/breaking_changes.md @@ -119,6 +119,7 @@ This happens immediately after the previous `develop` branch is merged to `maste * `git commit -m 'Branch point for <DATE> Breaking Change'` * `git tag breakpoint_<YYYY>_<MM>_<DD>` * `git push upstream breakpoint_<YYYY>_<MM>_<DD>` + * `git push upstream develop` * All submodules under `lib` now need to be checked against their QMK-based forks: * `git submodule foreach git log -n1` diff --git a/docs/data_driven_config.md b/docs/data_driven_config.md index ba287f5688..b288f9901a 100644 --- a/docs/data_driven_config.md +++ b/docs/data_driven_config.md @@ -79,8 +79,8 @@ If you are not sure how to edit this file or are not comfortable with Python [op The final piece of the puzzle is providing your new option to the build system. This is done by generating two files: -* `.build/obj_<keyboard>/src/info_config.h` -* `.build/obj_<keyboard>/src/rules.mk` +* `.build/obj_<keyboard>_<keymap>/src/info_config.h` +* `.build/obj_<keyboard>_<keymap>/src/rules.mk` These two files are generated by the code here: diff --git a/docs/feature_hd44780.md b/docs/feature_hd44780.md index 4ade640baa..dcbd656bbe 100644 --- a/docs/feature_hd44780.md +++ b/docs/feature_hd44780.md @@ -1,6 +1,6 @@ -# HD44780 LCD Driver +# HD44780 LCD Driver :id=hd44780-lcd-driver -## Supported Hardware +## Supported Hardware :id=supported-hardware LCD modules using [HD44780U](https://www.sparkfun.com/datasheets/LCD/HD44780.pdf) IC or equivalent, communicating in 4-bit mode. @@ -11,7 +11,7 @@ LCD modules using [HD44780U](https://www.sparkfun.com/datasheets/LCD/HD44780.pdf To run these modules at 3.3V, an additional MAX660 voltage converter IC must be soldered on, along with two 10µF capacitors. See [this page](https://www.codrey.com/electronic-circuits/hack-your-16x2-lcd/) for more details. -## Usage +## Usage :id=usage Add the following to your `rules.mk`: @@ -19,7 +19,7 @@ Add the following to your `rules.mk`: HD44780_ENABLE = yes ``` -## Basic Configuration +## Basic Configuration :id=basic-configuration Add the following to your `config.h`: @@ -33,9 +33,9 @@ Add the following to your `config.h`: |`HD44780_DISPLAY_LINES`|`2` |The number of visible lines on the display | |`HD44780_WRAP_LINES` |*Not defined* |If defined, input characters will wrap to the next line | -## Examples +## Examples :id=examples -### Hello World +### Hello World :id=example-hello-world Add the following to your `keymap.c`: @@ -46,7 +46,7 @@ void keyboard_post_init_user(void) { } ``` -### Custom Character Definition +### Custom Character Definition :id=example-custom-character Up to eight custom characters can be defined. This data is stored in the Character Generator RAM (CGRAM), and is not persistent across power cycles. @@ -77,15 +77,15 @@ void keyboard_post_init_user(void) { } ``` -## API +## API :id=api -### `void hd44780_init(bool cursor, bool blink)` +### `void hd44780_init(bool cursor, bool blink)` :id=api-hd44780-init Initialize the display. This function should be called only once, before any of the other functions can be called. -#### Arguments +#### Arguments :id=api-hd44780-init-arguments - `bool cursor` Whether to show the cursor. @@ -94,7 +94,7 @@ This function should be called only once, before any of the other functions can --- -### `void hd44780_clear(void)` +### `void hd44780_clear(void)` :id=api-hd44780-clear Clear the display. @@ -102,7 +102,7 @@ This function is called on init. --- -### `void hd44780_home(void)` +### `void hd44780_home(void)` :id=api-hd44780-home Move the cursor to the home position. @@ -110,13 +110,13 @@ This function is called on init. --- -### `void hd44780_on(bool cursor, bool blink)` +### `void hd44780_on(bool cursor, bool blink)` :id=api-hd44780-on Turn the display on, and/or set the cursor properties. This function is called on init. -#### Arguments +#### Arguments :id=api-hd44780-on-arguments - `bool cursor` Whether to show the cursor. @@ -125,17 +125,17 @@ This function is called on init. --- -### `void hd44780_off(void)` +### `void hd44780_off(void)` :id=api-hd44780-off Turn the display off. --- -### `void hd44780_set_cursor(uint8_t col, uint8_t line)` +### `void hd44780_set_cursor(uint8_t col, uint8_t line)` :id=api-hd44780-set-cursor Move the cursor to the specified position on the display. -#### Arguments +#### Arguments :id=api-hd44780-set-cursor-arguments - `uint8_t col` The column number to move to, from 0 to 15 on 16x2 displays. @@ -144,48 +144,48 @@ Move the cursor to the specified position on the display. --- -### `void hd44780_putc(char c)` +### `void hd44780_putc(char c)` :id=api-hd44780-putc Print a character to the display. The newline character `\n` will move the cursor to the start of the next line. The exact character shown may depend on the ROM code of your particular display - refer to the datasheet for the full character set. -#### Arguments +#### Arguments :id=api-hd44780-putc-arguments - `char c` The character to print. --- -### `void hd44780_puts(const char *s)` +### `void hd44780_puts(const char *s)` :id=api-hd44780-puts Print a string of characters to the display. -#### Arguments +#### Arguments :id=api-hd44780-puts-arguments - `const char *s` The string to print. --- -### `void hd44780_puts_P(const char *s)` +### `void hd44780_puts_P(const char *s)` :id=api-hd44780-puts-p Print a string of characters from PROGMEM to the display. On ARM devices, this function is simply an alias of `hd44780_puts()`. -#### Arguments +#### Arguments :id=api-hd44780-puts-p-arguments - `const char *s` The PROGMEM string to print (ie. `PSTR("Hello")`). --- -### `void hd44780_define_char(uint8_t index, uint8_t *data)` +### `void hd44780_define_char(uint8_t index, uint8_t *data)` :id=api-hd44780-define-char Define a custom character. -#### Arguments +#### Arguments :id=api-hd44780-define-char-arguments - `uint8_t index` The index of the custom character to define, from 0 to 7. @@ -194,13 +194,13 @@ Define a custom character. --- -### `void hd44780_define_char_P(uint8_t index, const uint8_t *data)` +### `void hd44780_define_char_P(uint8_t index, const uint8_t *data)` :id=api-hd44780-define-char-p Define a custom character from PROGMEM. On ARM devices, this function is simply an alias of `hd44780_define_char()`. -#### Arguments +#### Arguments :id=api-hd44780-define-char-p-arguments - `uint8_t index` The index of the custom character to define, from 0 to 7. @@ -209,21 +209,21 @@ On ARM devices, this function is simply an alias of `hd44780_define_char()`. --- -### `bool hd44780_busy(void)` +### `bool hd44780_busy(void)` :id=api-hd44780-busy Indicates whether the display is currently processing, and cannot accept instructions. -#### Return Value +#### Return Value :id=api-hd44780-busy-arguments `true` if the display is busy. --- -### `void hd44780_write(uint8_t data, bool isData)` +### `void hd44780_write(uint8_t data, bool isData)` :id=api-hd44780-write Write a byte to the display. -#### Arguments +#### Arguments :id=api-hd44780-write-arguments - `uint8_t data` The byte to send to the display. @@ -232,67 +232,67 @@ Write a byte to the display. --- -### `uint8_t hd44780_read(bool isData)` +### `uint8_t hd44780_read(bool isData)` :id=api-hd44780-read Read a byte from the display. -#### Arguments +#### Arguments :id=api-hd44780-read-arguments - `bool isData` Whether to read the current cursor position, or the character at the cursor. -#### Return Value +#### Return Value :id=api-hd44780-read-return If `isData` is `true`, the returned byte will be the character at the current DDRAM address. Otherwise, it will be the current DDRAM address and the busy flag. --- -### `void hd44780_command(uint8_t command)` +### `void hd44780_command(uint8_t command)` :id=api-hd44780-command Send a command to the display. Refer to the datasheet and `hd44780.h` for the valid commands and defines. This function waits for the display to clear the busy flag before sending the command. -#### Arguments +#### Arguments :id=api-hd44780-command-arguments - `uint8_t command` The command to send. --- -### `void hd44780_data(uint8_t data)` +### `void hd44780_data(uint8_t data)` :id=api-hd44780-data Send a byte of data to the display. This function waits for the display to clear the busy flag before sending the data. -#### Arguments +#### Arguments :id=api-hd44780-data-arguments - `uint8_t data` The byte of data to send. --- -### `void hd44780_set_cgram_address(uint8_t address)` +### `void hd44780_set_cgram_address(uint8_t address)` :id=api-hd44780-set-cgram-address Set the CGRAM address. This function is used when defining custom characters. -#### Arguments +#### Arguments :id=api-hd44780-set-cgram-address-arguments - `uint8_t address` The CGRAM address to move to, from `0x00` to `0x3F`. --- -### `void hd44780_set_ddram_address(uint8_t address)` +### `void hd44780_set_ddram_address(uint8_t address)` :id=api-hd44780-set-ddram-address Set the DDRAM address. This function is used when printing characters to the display, and setting the cursor. -#### Arguments +#### Arguments :id=api-hd44780-set-ddram-address-arguments - `uint8_t address` The DDRAM address to move to, from `0x00` to `0x7F`. diff --git a/docs/feature_led_matrix.md b/docs/feature_led_matrix.md index bc86099f1f..b967f943d3 100644 --- a/docs/feature_led_matrix.md +++ b/docs/feature_led_matrix.md @@ -139,7 +139,7 @@ Currently only 4 drivers are supported, but it would be trivial to support for m Define these arrays listing all the LEDs in your `<keyboard>.c`: ```c -const is31_led __flash g_is31_leds[LED_MATRIX_LED_COUNT] = { +const is31_led PROGMEM g_is31_leds[LED_MATRIX_LED_COUNT] = { /* Refer to IS31 manual for these locations * driver * | LED address @@ -158,7 +158,7 @@ Eg `#define ISSI_MANUAL_SCALING 3` Then Define the array listing all the LEDs you want to override in your `<keyboard>.c`: ```c -const is31_led __flash g_is31_scaling[ISSI_MANUAL_SCALING] = { +const is31_led PROGMEM g_is31_scaling[ISSI_MANUAL_SCALING] = { * LED Index * | Scaling * | | */ diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 75f07b5e64..89c9268ca4 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -386,7 +386,7 @@ Currently only 4 drivers are supported, but it would be trivial to support for m Define these arrays listing all the LEDs in your `<keyboard>.c`: ```c -const is31_led __flash g_is31_leds[RGB_MATRIX_LED_COUNT] = { +const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -406,7 +406,7 @@ Eg `#define ISSI_MANUAL_SCALING 3` Then Define the array listing all the LEDs you want to override in your `<keyboard>.c`: ```c -const is31_led __flash g_is31_scaling[ISSI_MANUAL_SCALING] = { +const is31_led PROGMEM g_is31_scaling[ISSI_MANUAL_SCALING] = { * LED Index * | R scaling * | | G scaling diff --git a/docs/feature_rgblight.md b/docs/feature_rgblight.md index 5131658ae1..7deda1f8d5 100644 --- a/docs/feature_rgblight.md +++ b/docs/feature_rgblight.md @@ -524,37 +524,6 @@ By defining `RGBLIGHT_LED_MAP` as in the example below, you can specify the LED ``` <img src="https://user-images.githubusercontent.com/2170248/55743725-08ad7a80-5a6e-11e9-83ed-126a2b0209fc.JPG" alt="simple mapped" width="50%"/> -For keyboards that use the RGB LEDs as a backlight for each key, you can also define it as in the example below. - -```c -// config.h - -#define RGBLED_NUM 30 - -/* RGB LED Conversion macro from physical array to electric array */ -#define LED_LAYOUT( \ - L00, L01, L02, L03, L04, L05, \ - L10, L11, L12, L13, L14, L15, \ - L20, L21, L22, L23, L24, L25, \ - L30, L31, L32, L33, L34, L35, \ - L40, L41, L42, L43, L44, L45 ) \ - { \ - L05, L04, L03, L02, L01, L00, \ - L10, L11, L12, L13, L14, L15, \ - L25, L24, L23, L22, L21, L20, \ - L30, L31, L32, L33, L34, L35, \ - L46, L45, L44, L43, L42, L41 \ - } - -/* RGB LED logical order map */ -/* Top->Bottom, Right->Left */ -#define RGBLIGHT_LED_MAP LED_LAYOUT( \ - 25, 20, 15, 10, 5, 0, \ - 26, 21, 16, 11, 6, 1, \ - 27, 22, 17, 12, 7, 2, \ - 28, 23, 18, 13, 8, 3, \ - 29, 24, 19, 14, 9, 4 ) - ``` ## Clipping Range diff --git a/docs/feature_send_string.md b/docs/feature_send_string.md index 67df0224e9..7d3f3ba32a 100644 --- a/docs/feature_send_string.md +++ b/docs/feature_send_string.md @@ -1,4 +1,4 @@ -# Send String +# Send String :id=send-string The Send String API is part of QMK's macro system. It allows for sequences of keystrokes to be sent automatically. @@ -6,7 +6,7 @@ The full ASCII character set is supported, along with all of the keycodes in the ?> Unicode characters are **not** supported with this API -- see the [Unicode](feature_unicode.md) feature instead. -## Usage +## Usage :id=usage Send String is enabled by default, so there is usually no need for any special setup. However, if it is disabled, add the following to your `rules.mk`: @@ -14,7 +14,7 @@ Send String is enabled by default, so there is usually no need for any special s SEND_STRING_ENABLE = yes ``` -## Basic Configuration +## Basic Configuration :id=basic-configuration Add the following to your `config.h`: @@ -23,7 +23,7 @@ Add the following to your `config.h`: |`SENDSTRING_BELL`|*Not defined* |If the [Audio](feature_audio.md) feature is enabled, the `\a` character (ASCII `BEL`) will beep the speaker.| |`BELL_SOUND` |`TERMINAL_SOUND`|The song to play when the `\a` character is encountered. By default, this is an eighth note of C5. | -## Keycodes +## Keycodes :id=keycodes The Send String functions accept C string literals, but specific keycodes can be injected with the below macros. All of the keycodes in the [Basic Keycode range](keycodes_basic.md) are supported (as these are the only ones that will actually be sent to the host), but with an `X_` prefix instead of `KC_`. @@ -44,13 +44,13 @@ The following characters are also mapped to their respective keycodes for conven |`\t` |`\x1B`|`TAB`|`KC_TAB` | | |`\x7F`|`DEL`|`KC_DELETE` | -### Language Support +### Language Support :id=language-support By default, Send String assumes your OS keyboard layout is set to US ANSI. If you are using a different keyboard layout, you can [override the lookup tables used to convert ASCII characters to keystrokes](reference_keymap_extras.md#sendstring-support). -## Examples +## Examples :id=examples -### Hello World +### Hello World :id=example-hello-world A simple custom keycode which types out "Hello, world!" and the Enter key when pressed. @@ -70,7 +70,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } ``` -### Keycode Injection +### Keycode Injection :id=example-keycode-injection This example types out opening and closing curly braces, then taps the left arrow key to move the cursor between the two. @@ -84,26 +84,26 @@ This example types Ctrl+A, then Ctrl+C, without releasing Ctrl. SEND_STRING(SS_LCTL("ac")); ``` -## API +## API :id=api -### `void send_string(const char *string)` +### `void send_string(const char *string)` :id=api-send-string Type out a string of ASCII characters. This function simply calls `send_string_with_delay(string, 0)`. -#### Arguments +#### Arguments :id=api-send-string-arguments - `const char *string` The string to type out. --- -### `void send_string_with_delay(const char *string, uint8_t interval)` +### `void send_string_with_delay(const char *string, uint8_t interval)` :id=api-send-string-with-delay Type out a string of ASCII characters, with a delay between each character. -#### Arguments +#### Arguments :id=api-send-string-with-delay-arguments - `const char *string` The string to type out. @@ -112,26 +112,26 @@ Type out a string of ASCII characters, with a delay between each character. --- -### `void send_string_P(const char *string)` +### `void send_string_P(const char *string)` :id=api-send-string-p Type out a PROGMEM string of ASCII characters. On ARM devices, this function is simply an alias for `send_string_with_delay(string, 0)`. -#### Arguments +#### Arguments :id=api-send-string-p-arguments - `const char *string` The string to type out. --- -### `void send_string_with_delay_P(const char *string, uint8_t interval)` +### `void send_string_with_delay_P(const char *string, uint8_t interval)` :id=api-send-string-with-delay-p Type out a PROGMEM string of ASCII characters, with a delay between each character. On ARM devices, this function is simply an alias for `send_string_with_delay(string, interval)`. -#### Arguments +#### Arguments :id=api-send-string-with-delay-p-arguments - `const char *string` The string to type out. @@ -140,76 +140,76 @@ On ARM devices, this function is simply an alias for `send_string_with_delay(str --- -### `void send_char(char ascii_code)` +### `void send_char(char ascii_code)` :id=api-send-char Type out an ASCII character. -#### Arguments +#### Arguments :id=api-send-char-arguments - `char ascii_code` The character to type. --- -### `void send_dword(uint32_t number)` +### `void send_dword(uint32_t number)` :id=api-send-dword Type out an eight digit (unsigned 32-bit) hexadecimal value. The format is `[0-9a-f]{8}`, eg. `00000000` through `ffffffff`. -#### Arguments +#### Arguments :id=api-send-dword-arguments - `uint32_t number` The value to type, from 0 to 4,294,967,295. --- -### `void send_word(uint16_t number)` +### `void send_word(uint16_t number)` :id=api-send-word Type out a four digit (unsigned 16-bit) hexadecimal value. The format is `[0-9a-f]{4}`, eg. `0000` through `ffff`. -#### Arguments +#### Arguments :id=api-send-word-arguments - `uint16_t number` The value to type, from 0 to 65,535. --- -### `void send_byte(uint8_t number)` +### `void send_byte(uint8_t number)` :id=api-send-bytes Type out a two digit (8-bit) hexadecimal value. The format is `[0-9a-f]{2}`, eg. `00` through `ff`. -#### Arguments +#### Arguments :id=api-send-byte-arguments - `uint8_t number` The value to type, from 0 to 255. --- -### `void send_nibble(uint8_t number)` +### `void send_nibble(uint8_t number)` :id=api-send-nibble Type out a single hexadecimal digit. The format is `[0-9a-f]{1}`, eg. `0` through `f`. -#### Arguments +#### Arguments :id=api-send-nibble-arguments - `uint8_t number` The value to type, from 0 to 15. --- -### `void tap_random_base64(void)` +### `void tap_random_base64(void)` :id=api-tap-random-base64 Type a pseudorandom character from the set `A-Z`, `a-z`, `0-9`, `+` and `/`. --- -### `SEND_STRING(string)` +### `SEND_STRING(string)` :id=api-send-string-macro Shortcut macro for `send_string_with_delay_P(PSTR(string), 0)`. @@ -217,7 +217,7 @@ On ARM devices, this define evaluates to `send_string_with_delay(string, 0)`. --- -### `SEND_STRING_DELAY(string, interval)` +### `SEND_STRING_DELAY(string, interval)` :id=api-send-string-delay-macro Shortcut macro for `send_string_with_delay_P(PSTR(string), interval)`. diff --git a/docs/feature_unicode.md b/docs/feature_unicode.md index 455596dab5..312a033257 100644 --- a/docs/feature_unicode.md +++ b/docs/feature_unicode.md @@ -42,7 +42,7 @@ Add the following to your `rules.mk`: UNICODEMAP_ENABLE = yes ``` -Then add `X(i)` keycodes to your keymap, where _i_ is the desired character's index in the mapping table. This can be a numeric value, but it's recommended to keep the indices in an enum and access them by name. +Then add `UM(i)` keycodes to your keymap, where _i_ is the desired character's index in the mapping table. This can be a numeric value, but it's recommended to keep the indices in an enum and access them by name. ```c enum unicode_names { @@ -58,13 +58,13 @@ const uint32_t unicode_map[] PROGMEM = { }; ``` -Then you can use `X(BANG)`, `X(SNEK)` etc. in your keymap. +Then you can use `UM(BANG)`, `UM(SNEK)` etc. in your keymap. #### Lower and Upper Case -Characters often come in lower and upper case pairs, such as å and Å. To make inputting these characters easier, you can use `XP(i, j)` in your keymap, where _i_ and _j_ are the mapping table indices of the lower and upper case character, respectively. If you're holding down Shift or have Caps Lock turned on when you press the key, the second (upper case) character will be inserted; otherwise, the first (lower case) version will appear. +Characters often come in lower and upper case pairs, such as å and Å. To make inputting these characters easier, you can use `UP(i, j)` in your keymap, where _i_ and _j_ are the mapping table indices of the lower and upper case character, respectively. If you're holding down Shift or have Caps Lock turned on when you press the key, the second (upper case) character will be inserted; otherwise, the first (lower case) version will appear. -This is most useful when creating a keymap for an international layout with special characters. Instead of having to put the lower and upper case versions of a character on separate keys, you can have them both on the same key by using `XP()`. This helps blend Unicode keys in with regular alphas. +This is most useful when creating a keymap for an international layout with special characters. Instead of having to put the lower and upper case versions of a character on separate keys, you can have them both on the same key by using `UP()`. This helps blend Unicode keys in with regular alphas. Due to keycode size constraints, _i_ and _j_ can each only refer to one of the first 128 characters in your `unicode_map`. In other words, 0 ≤ _i_ ≤ 127 and 0 ≤ _j_ ≤ 127. This is enough for most use cases, but if you'd like to customize the index calculation, you can override the [`unicodemap_index()`](https://github.com/qmk/qmk_firmware/blob/71f640d47ee12c862c798e1f56392853c7b1c1a8/quantum/process_keycode/process_unicodemap.c#L36) function. This also allows you to, say, check Ctrl instead of Shift/Caps. diff --git a/docs/getting_started_make_guide.md b/docs/getting_started_make_guide.md index 1a7e276098..3d98e4602b 100644 --- a/docs/getting_started_make_guide.md +++ b/docs/getting_started_make_guide.md @@ -109,7 +109,7 @@ This allows you to send Unicode characters using `UC(<code point>)` in your keym `UNICODEMAP_ENABLE` -This allows you to send Unicode characters using `X(<map index>)` in your keymap. You will need to maintain a mapping table in your keymap file. All possible code points (up to `0x10FFFF`) are supported. +This allows you to send Unicode characters using `UM(<map index>)` in your keymap. You will need to maintain a mapping table in your keymap file. All possible code points (up to `0x10FFFF`) are supported. `UCIS_ENABLE` diff --git a/docs/i2c_driver.md b/docs/i2c_driver.md index f4e6c6619e..92b666b5e3 100644 --- a/docs/i2c_driver.md +++ b/docs/i2c_driver.md @@ -72,7 +72,7 @@ Configuration-wise, you'll need to set up the peripheral as per your MCU's datas The following configuration values depend on the specific MCU in use. -### I2Cv1 :id=i2cv1 +### I2Cv1 :id=arm-configuration-i2cv1 * STM32F1xx * STM32F2xx @@ -88,7 +88,7 @@ See [this page](https://www.playembedded.org/blog/stm32-i2c-chibios/#7_I2Cv1_con |`I2C1_CLOCK_SPEED` |`100000` | |`I2C1_DUTY_CYCLE` |`STD_DUTY_CYCLE`| -### I2Cv2 :id=i2cv2 +### I2Cv2 :id=arm-configuration-i2cv2 * STM32F0xx * STM32F3xx @@ -105,9 +105,9 @@ See [this page](https://www.playembedded.org/blog/stm32-i2c-chibios/#8_I2Cv2_I2C |`I2C1_TIMINGR_SCLH` |`38U` | |`I2C1_TIMINGR_SCLL` |`129U` | -## Functions :id=functions +## API :id=api -### `void i2c_init(void)` +### `void i2c_init(void)` :id=api-i2c-init Initialize the I2C driver. This function must be called only once, before any of the below functions can be called. @@ -126,28 +126,28 @@ void i2c_init(void) { --- -### `i2c_status_t i2c_start(uint8_t address, uint16_t timeout)` +### `i2c_status_t i2c_start(uint8_t address, uint16_t timeout)` :id=api-i2c-start Start an I2C transaction. -#### Arguments +#### Arguments :id=api-i2c-start-arguments - `uint8_t address` The 7-bit I2C address of the device (ie. without the read/write bit - this will be set automatically). - `uint16_t timeout` The time in milliseconds to wait for a response from the target device. -#### Return Value +#### Return Value :id=api-i2c-start-return `I2C_STATUS_TIMEOUT` if the timeout period elapses, `I2C_STATUS_ERROR` if some other error occurs, otherwise `I2C_STATUS_SUCCESS`. --- -### `i2c_status_t i2c_transmit(uint8_t address, uint8_t *data, uint16_t length, uint16_t timeout)` +### `i2c_status_t i2c_transmit(uint8_t address, uint8_t *data, uint16_t length, uint16_t timeout)` :id=api-i2c-transmit Send multiple bytes to the selected I2C device. -#### Arguments +#### Arguments :id=api-i2c-transmit-arguments - `uint8_t address` The 7-bit I2C address of the device. @@ -158,17 +158,17 @@ Send multiple bytes to the selected I2C device. - `uint16_t timeout` The time in milliseconds to wait for a response from the target device. -#### Return Value +#### Return Value :id=api-i2c-transmit-return `I2C_STATUS_TIMEOUT` if the timeout period elapses, `I2C_STATUS_ERROR` if some other error occurs, otherwise `I2C_STATUS_SUCCESS`. --- -### `i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)` +### `i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)` :id=api-i2c-receive Receive multiple bytes from the selected I2C device. -#### Arguments +#### Arguments :id=api-i2c-receive-arguments - `uint8_t address` The 7-bit I2C address of the device. @@ -179,17 +179,17 @@ Receive multiple bytes from the selected I2C device. - `uint16_t timeout` The time in milliseconds to wait for a response from the target device. -#### Return Value +#### Return Value :id=api-i2c-receive-return `I2C_STATUS_TIMEOUT` if the timeout period elapses, `I2C_STATUS_ERROR` if some other error occurs, otherwise `I2C_STATUS_SUCCESS`. --- -### `i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)` +### `i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)` :id=api-i2c-writereg Writes to a register with an 8-bit address on the I2C device. -#### Arguments +#### Arguments :id=api-i2c-writereg-arguments - `uint8_t devaddr` The 7-bit I2C address of the device. @@ -202,17 +202,17 @@ Writes to a register with an 8-bit address on the I2C device. - `uint16_t timeout` The time in milliseconds to wait for a response from the target device. -#### Return Value +#### Return Value :id=api-i2c-writereg-return `I2C_STATUS_TIMEOUT` if the timeout period elapses, `I2C_STATUS_ERROR` if some other error occurs, otherwise `I2C_STATUS_SUCCESS`. --- -### `i2c_status_t i2c_writeReg16(uint8_t devaddr, uint16_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)` +### `i2c_status_t i2c_writeReg16(uint8_t devaddr, uint16_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)` :id=api-i2c-writereg16 Writes to a register with a 16-bit address (big endian) on the I2C device. -#### Arguments +#### Arguments :id=api-i2c-writereg16-arguments - `uint8_t devaddr` The 7-bit I2C address of the device. @@ -225,17 +225,17 @@ Writes to a register with a 16-bit address (big endian) on the I2C device. - `uint16_t timeout` The time in milliseconds to wait for a response from the target device. -#### Return Value +#### Return Value :id=api-i2c-writereg16-return `I2C_STATUS_TIMEOUT` if the timeout period elapses, `I2C_STATUS_ERROR` if some other error occurs, otherwise `I2C_STATUS_SUCCESS`. --- -### `i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)` +### `i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)` :id=api-i2c-readreg Reads from a register with an 8-bit address on the I2C device. -#### Arguments +#### Arguments :id=api-i2c-readreg-arguments - `uint8_t devaddr` The 7-bit I2C address of the device. @@ -246,7 +246,7 @@ Reads from a register with an 8-bit address on the I2C device. - `uint16_t timeout` The time in milliseconds to wait for a response from the target device. -#### Return Value +#### Return Value :id=api-i2c-readreg-return `I2C_STATUS_TIMEOUT` if the timeout period elapses, `I2C_STATUS_ERROR` if some other error occurs, otherwise `I2C_STATUS_SUCCESS`. @@ -256,7 +256,7 @@ Reads from a register with an 8-bit address on the I2C device. Reads from a register with a 16-bit address (big endian) on the I2C device. -#### Arguments +#### Arguments :id=api-i2c-readreg16-arguments - `uint8_t devaddr` The 7-bit I2C address of the device. @@ -267,12 +267,12 @@ Reads from a register with a 16-bit address (big endian) on the I2C device. - `uint16_t timeout` The time in milliseconds to wait for a response from the target device. -#### Return Value +#### Return Value :id=api-i2c-readreg16-return `I2C_STATUS_TIMEOUT` if the timeout period elapses, `I2C_STATUS_ERROR` if some other error occurs, otherwise `I2C_STATUS_SUCCESS`. --- -### `i2c_status_t i2c_stop(void)` +### `i2c_status_t i2c_stop(void)` :id=api-i2c-stop Stop the current I2C transaction. diff --git a/docs/ja/data_driven_config.md b/docs/ja/data_driven_config.md index bc8f4d24a5..6296173b66 100644 --- a/docs/ja/data_driven_config.md +++ b/docs/ja/data_driven_config.md @@ -109,8 +109,8 @@ QMK が完全な `info.json` を生成するときはいつでも、`config.h` パズルの最後のピースは、ビルドシステムに新しいオプションを提供することです。 これは、2つのファイルを生成することによって行われます。 -* `.build/obj_<keyboard>/src/info_config.h` -* `.build/obj_<keyboard>/src/rules.mk` +* `.build/obj_<keyboard>_<keymap>/src/info_config.h` +* `.build/obj_<keyboard>_<keymap>/src/rules.mk` この2つのファイルは、次のコードによって生成されます。 diff --git a/docs/keycodes.md b/docs/keycodes.md index e5b6246af7..65762234a4 100644 --- a/docs/keycodes.md +++ b/docs/keycodes.md @@ -848,8 +848,8 @@ See also: [Unicode Support](feature_unicode.md) |Key |Aliases |Description | |----------------------------|---------|----------------------------------------------------------------| |`UC(c)` | |Send Unicode code point `c`, up to `0x7FFF` | -|`X(i)` | |Send Unicode code point at index `i` in `unicode_map` | -|`XP(i, j)` | |Send Unicode code point at index `i`, or `j` if Shift/Caps is on| +|`UM(i)` | |Send Unicode code point at index `i` in `unicode_map` | +|`UP(i, j)` | |Send Unicode code point at index `i`, or `j` if Shift/Caps is on| |`QK_UNICODE_MODE_NEXT` |`UC_NEXT`|Cycle through selected input modes | |`QK_UNICODE_MODE_PREVIOUS` |`UC_PREV`|Cycle through selected input modes in reverse | |`QK_UNICODE_MODE_MACOS` |`UC_MAC` |Switch to macOS input | diff --git a/docs/spi_driver.md b/docs/spi_driver.md index a27a3a13d0..c1c6831e73 100644 --- a/ |