diff options
Diffstat (limited to 'docs')
29 files changed, 161 insertions, 344 deletions
diff --git a/docs/_summary.md b/docs/_summary.md index 01808bd675..ce579cb071 100644 --- a/docs/_summary.md +++ b/docs/_summary.md @@ -41,7 +41,6 @@ * [Keymap Overview](keymap.md) * Development Environments * [Docker Guide](getting_started_docker.md) - * [Vagrant Guide](getting_started_vagrant.md) * Flashing * [Flashing](flashing.md) * [Flashing ATmega32A (ps2avrgb)](flashing_bootloadhid.md) diff --git a/docs/config_options.md b/docs/config_options.md index 5bfb7c5d58..5ea71d993e 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -150,7 +150,7 @@ If you define these options you will enable the associated feature, which may in * `#define TAPPING_TERM_PER_KEY` * enables handling for per key `TAPPING_TERM` settings * `#define RETRO_TAPPING` - * tap anyway, even after TAPPING_TERM, if there was no other key interruption between press and release + * tap anyway, even after `TAPPING_TERM`, if there was no other key interruption between press and release * See [Retro Tapping](tap_hold.md#retro-tapping) for details * `#define RETRO_TAPPING_PER_KEY` * enables handling for per key `RETRO_TAPPING` settings @@ -161,9 +161,6 @@ If you define these options you will enable the associated feature, which may in * See [Permissive Hold](tap_hold.md#permissive-hold) for details * `#define PERMISSIVE_HOLD_PER_KEY` * enabled handling for per key `PERMISSIVE_HOLD` settings -* `#define IGNORE_MOD_TAP_INTERRUPT` - * makes it possible to do rolling combos (zx) with keys that convert to other keys on hold, by enforcing the `TAPPING_TERM` for both keys. - * See [Ignore Mod Tap Interrupt](tap_hold.md#ignore-mod-tap-interrupt) for details * `#define QUICK_TAP_TERM 100` * tap-then-hold timing to use a dual role key to repeat keycode * See [Quick Tap Term](tap_hold.md#quick-tap-term) @@ -217,7 +214,7 @@ If you define these options you will enable the associated feature, which may in ## RGB Light Configuration -* `#define RGB_DI_PIN D7` +* `#define WS2812_DI_PIN D7` * pin the DI on the WS2812 is hooked-up to * `#define RGBLIGHT_LAYERS` * Lets you define [lighting layers](feature_rgblight.md?id=lighting-layers) that can be toggled on or off. Great for showing the current keyboard layer or caps lock state. @@ -233,7 +230,7 @@ If you define these options you will enable the associated feature, which may in * `#define RGBLIGHT_SPLIT` * Needed if both halves of the board have RGB LEDs wired directly to the RGB output pin on the controllers instead of passing the output of the left half to the input of the right half * `#define RGBLED_SPLIT { 6, 6 }` - * number of LEDs connected that are directly wired to `RGB_DI_PIN` on each half of a split keyboard + * number of LEDs connected that are directly wired to the RGB pin on each half of a split keyboard * First value indicates number of LEDs for left half, second value is for the right half * When RGBLED_SPLIT is defined, RGBLIGHT_SPLIT is implicitly defined. * `#define RGBLIGHT_HUE_STEP 12` diff --git a/docs/feature_caps_word.md b/docs/feature_caps_word.md index c58d1a56e2..7f726b059d 100644 --- a/docs/feature_caps_word.md +++ b/docs/feature_caps_word.md @@ -90,6 +90,26 @@ by defining `IS_COMMAND()` in config.h: ## Customizing Caps Word :id=customizing-caps-word +### Invert on shift :id=invert-on-shift + +By default, Caps Word turns off when Shift keys are pressed, considering them as +word-breaking. Alternatively with the `CAPS_WORD_INVERT_ON_SHIFT` option, +pressing the Shift key continues Caps Word and inverts the shift state. This +is convenient for uncapitalizing one or a few letters within a word, for +example with Caps Word on, typing "D, B, Shift+A, Shift+A, S" produces "DBaaS", +or typing "P, D, F, Shift+S" produces "PDFs". + +Enable it by adding in config.h + +```c +#define CAPS_WORD_INVERT_ON_SHIFT +``` + +This option works with regular Shift keys `KC_LSFT` and `KC_RSFT`, mod-tap Shift +keys, and one-shot Shift keys. Note that while Caps Word is on, one-shot Shift +keys behave like regular Shift keys, and have effect only while they are held. + + ### Idle timeout :id=idle-timeout Caps Word turns off automatically if no keys are pressed for diff --git a/docs/feature_converters.md b/docs/feature_converters.md index ec1f3915ee..b1abfa373a 100644 --- a/docs/feature_converters.md +++ b/docs/feature_converters.md @@ -20,11 +20,13 @@ Currently the following converters are available: | `promicro` | `rp2040_ce` | | `promicro` | `elite_pi` | | `promicro` | `helios` | +| `promicro` | `liatris` | | `promicro` | `michi` | | `elite_c` | `stemcell` | | `elite_c` | `rp2040_ce` | | `elite_c` | `elite_pi` | | `elite_c` | `helios` | +| `elite_c` | `liatris` | See below for more in depth information on each converter. @@ -87,6 +89,7 @@ If a board currently supported in QMK uses a [Pro Micro](https://www.sparkfun.co | [customMK Bonsai C4](https://shop.custommk.com/products/bonsai-c4-microcontroller-board) | `bonsai_c4` | | [Elite-Pi](https://keeb.io/products/elite-pi-usb-c-pro-micro-replacement-rp2040) | `elite_pi` | | [0xCB Helios](https://keeb.supply/products/0xcb-helios) | `helios` | +| [Liatris](https://splitkb.com/products/liatris) | `liatris` | | [Michi](https://github.com/ci-bus/michi-promicro-rp2040) | `michi` | Converter summary: @@ -103,6 +106,7 @@ Converter summary: | `rp2040_ce` | `-e CONVERT_TO=rp2040_ce` | `CONVERT_TO=rp2040_ce` | `#ifdef CONVERT_TO_RP2040_CE` | | `elite_pi` | `-e CONVERT_TO=elite_pi` | `CONVERT_TO=elite_pi` | `#ifdef CONVERT_TO_ELITE_PI` | | `helios` | `-e CONVERT_TO=helios` | `CONVERT_TO=helios` | `#ifdef CONVERT_TO_HELIOS` | +| `liatris` | `-e CONVERT_TO=liatris` | `CONVERT_TO=liatris` | `#ifdef CONVERT_TO_LIATRIS` | | `michi` | `-e CONVERT_TO=michi` | `CONVERT_TO=michi` | `#ifdef CONVERT_TO_MICHI` | ### Proton C :id=proton_c @@ -167,7 +171,7 @@ The Bonsai C4 only has one on-board LED (B2), and by default, both the Pro Micro #define B0 PAL_LINE(GPIOA, 9) ``` -### RP2040 Community Edition - Elite-Pi and Helios :id=rp2040_ce +### RP2040 Community Edition - Elite-Pi, Helios, and Liatris :id=rp2040_ce Feature set currently identical to [Adafruit KB2040](#kb2040). @@ -184,6 +188,7 @@ If a board currently supported in QMK uses an [Elite-C](https://keeb.io/products | [STeMCell](https://github.com/megamind4089/STeMCell) | `stemcell` | | [Elite-Pi](https://keeb.io/products/elite-pi-usb-c-pro-micro-replacement-rp2040) | `elite_pi` | | [0xCB Helios](https://keeb.supply/products/0xcb-helios) | `helios` | +| [Liatris](https://splitkb.com/products/liatris) | `liatris` | Converter summary: @@ -193,6 +198,7 @@ Converter summary: | `rp2040_ce` | `-e CONVERT_TO=rp2040_ce` | `CONVERT_TO=rp2040_ce` | `#ifdef CONVERT_TO_RP2040_CE` | | `elite_pi` | `-e CONVERT_TO=elite_pi` | `CONVERT_TO=elite_pi` | `#ifdef CONVERT_TO_ELITE_PI` | | `helios` | `-e CONVERT_TO=helios` | `CONVERT_TO=helios` | `#ifdef CONVERT_TO_HELIOS` | +| `liatris` | `-e CONVERT_TO=liatris` | `CONVERT_TO=liatris` | `#ifdef CONVERT_TO_LIATRIS` | ### STeMCell :id=stemcell_elite diff --git a/docs/feature_dynamic_macros.md b/docs/feature_dynamic_macros.md index f5a6952b6b..8ab1bad61c 100644 --- a/docs/feature_dynamic_macros.md +++ b/docs/feature_dynamic_macros.md @@ -59,7 +59,7 @@ There are a number of hooks that you can use to add custom functionality and fee Note, that direction indicates which macro it is, with `1` being Macro 1, `-1` being Macro 2, and 0 being no macro. -* `dynamic_macro_record_start_user(void)` - Triggered when you start recording a macro. +* `dynamic_macro_record_start_user(int8_t direction)` - Triggered when you start recording a macro. * `dynamic_macro_play_user(int8_t direction)` - Triggered when you play back a macro. * `dynamic_macro_record_key_user(int8_t direction, keyrecord_t *record)` - Triggered on each keypress while recording a macro. * `dynamic_macro_record_end_user(int8_t direction)` - Triggered when the macro recording is stopped. diff --git a/docs/feature_encoders.md b/docs/feature_encoders.md index 1c521a4eff..74857c265d 100644 --- a/docs/feature_encoders.md +++ b/docs/feature_encoders.md @@ -102,9 +102,9 @@ Using encoder mapping pumps events through the normal QMK keycode processing pip ## Callbacks -When not using `ENCODER_MAP_ENABLE = yes`, the callback functions can be inserted into your `<keyboard>.c`: +?> [**Default Behaviour**](https://github.com/qmk/qmk_firmware/blob/master/quantum/encoder.c#L79-#L98): all encoders installed will function as volume up (`KC_VOLU`) on clockwise rotation and volume down (`KC_VOLD`) on counter-clockwise rotation. If you do not wish to override this, no further configuration is necessary. -?> Those who are adding new keyboard support where encoders are enabled at the keyboard level should include basic encoder functionality at the keyboard level (`<keyboard>.c`) using the `encoder_update_kb()` function, that way it works for QMK Configuator users and exists in general. +If you would like the alter the default behaviour, and are not using `ENCODER_MAP_ENABLE = yes`, the callback functions can be inserted into your `<keyboard>.c`: ```c bool encoder_update_kb(uint8_t index, bool clockwise) { @@ -113,9 +113,9 @@ bool encoder_update_kb(uint8_t index, bool clockwise) { } if (index == 0) { /* First encoder */ if (clockwise) { - tap_code_delay(KC_VOLU, 10); + tap_code(KC_PGDN); } else { - tap_code_delay(KC_VOLD, 10); + tap_code(KC_PGUP); } } else if (index == 1) { /* Second encoder */ if (clockwise) { @@ -134,9 +134,9 @@ or `keymap.c`: bool encoder_update_user(uint8_t index, bool clockwise) { if (index == 0) { /* First encoder */ if (clockwise) { - tap_code_delay(KC_VOLU, 10); + tap_code(KC_PGDN); } else { - tap_code_delay(KC_VOLD, 10); + tap_code(KC_PGUP); } } else if (index == 1) { /* Second encoder */ if (clockwise) { @@ -149,7 +149,7 @@ bool encoder_update_user(uint8_t index, bool clockwise) { } ``` -!> If you return `true` in the keymap level `_user` function, it will allow the keyboard level encoder code to run on top of your own. Returning `false` will override the keyboard level function, if setup correctly. This is generally the safest option to avoid confusion. +!> If you return `true` in the keymap level `_user` function, it will allow the keyboard/core level encoder code to run on top of your own. Returning `false` will override the keyboard level function, if setup correctly. This is generally the safest option to avoid confusion. ## Hardware diff --git a/docs/feature_layers.md b/docs/feature_layers.md index f8cb53eda4..8503603ffe 100644 --- a/docs/feature_layers.md +++ b/docs/feature_layers.md @@ -127,6 +127,54 @@ layer_state_t layer_state_set_user(layer_state_t state) { } ``` +### Example: Keycode to cycle through layers + +This example shows how to implement a custom keycode to cycle through a range of layers. + +```c +// Define the keycode, `QK_USER` avoids collisions with existing keycodes +enum keycodes { + KC_CYCLE_LAYERS = QK_USER, +}; + +// 1st layer on the cycle +#define LAYER_CYCLE_START 0 +// Last layer on the cycle +#define LAYER_CYCLE_END 4 + +// Add the behaviour of this new keycode +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case KC_CYCLE_LAYERS: + // Our logic will happen on presses, nothing is done on releases + if (!record->event.pressed) { + // We've already handled the keycode (doing nothing), let QMK know so no further code is run unnecessarily + return false; + } + + uint8_t current_layer = get_highest_layer(layer_state); + + // Check if we are within the range, if not quit + if (curent_layer > LAYER_CYCLE_END || current_layer < LAYER_CYCLE_START) { + return false; + } + + uint8_t next_layer = current_layer + 1; + if (next_layer > LAYER_CYCLE_END) { + next_layer = LAYER_CYCLE_START; + } + layer_move(next_layer); + return false; + + // Process other keycodes normally + default: + return true; + } +} + +// Place `KC_CYCLE_LAYERS` as a keycode in your keymap +``` + Use the `IS_LAYER_ON_STATE(state, layer)` and `IS_LAYER_OFF_STATE(state, layer)` macros to check the status of a particular layer. Outside of `layer_state_set_*` functions, you can use the `IS_LAYER_ON(layer)` and `IS_LAYER_OFF(layer)` macros to check global layer state. diff --git a/docs/feature_pointing_device.md b/docs/feature_pointing_device.md index 0089dc7024..c459ba4e9d 100644 --- a/docs/feature_pointing_device.md +++ b/docs/feature_pointing_device.md @@ -197,6 +197,24 @@ The Pimoroni Trackball module is a I2C based breakout board with an RGB enable t | `PIMORONI_TRACKBALL_DEBOUNCE_CYCLES` | (Optional) The number of scan cycles used for debouncing on the ball press. | `20` | | `PIMORONI_TRACKBALL_ERROR_COUNT` | (Optional) Specifies the number of read/write errors until the sensor is disabled. | `10` | +### PMW3320 Sensor + +To use the PMW3320 sensor, add this to your `rules.mk` + +```make +POINTING_DEVICE_DRIVER = pmw3320 +``` + +The PMW3320 sensor uses a serial type protocol for communication, and requires an additional light source (it could work without one, but expect it to be out of service early). + +| Setting | Description | Default | +| ------------------- | ------------------------------------------------------------------- | -------------------------- | +| `PMW3320_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. | `POINTING_DEVICE_SCLK_PIN` | +| `PMW3320_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. | `POINTING_DEVICE_SDIO_PIN` | +| `PMW3320_CS_PIN` | (Required) The pin connected to the cable select pin of the sensor. | `POINTING_DEVICE_CS_PIN` | + +The CPI range is 500-3500, in increments of 250. Defaults to 1000 CPI. + ### PMW 3360 and PMW 3389 Sensor This drivers supports both the PMW 3360 and PMW 3389 sensor as well as multiple sensors of the same type _per_ controller, so 2 can be attached at the same side for split keyboards (or unsplit keyboards). @@ -713,7 +731,7 @@ _Note: The Cirque pinnacle track pad already implements a custom activation func When using a custom pointing device (overwriting `pointing_device_task`) the following code should be somewhere in the `pointing_device_task_*` stack: ```c -void pointing_device_task(void) { +bool pointing_device_task(void) { //...Custom pointing device task code // handle automatic mouse layer (needs report_mouse_t as input) @@ -721,7 +739,7 @@ void pointing_device_task(void) { //...More custom pointing device task code - pointing_device_send(); + return pointing_device_send(); } ``` diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 20ad4c7faf..96c1928abd 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -361,7 +361,7 @@ Configure the hardware via your `config.h`: ```c // The pin connected to the data pin of the LEDs -#define RGB_DI_PIN D7 +#define WS2812_DI_PIN D7 // The number of LEDs connected #define RGB_MATRIX_LED_COUNT 70 ``` @@ -383,9 +383,9 @@ Configure the hardware via your `config.h`: ```c // The pin connected to the data pin of the LEDs -#define RGB_DI_PIN D7 +#define APA102_DI_PIN D7 // The pin connected to the clock pin of the LEDs -#define RGB_CI_PIN D6 +#define APA102_CI_PIN D6 // The number of LEDs connected #define RGB_MATRIX_LED_COUNT 70 ``` diff --git a/docs/feature_rgblight.md b/docs/feature_rgblight.md index 060efaf1b3..5131658ae1 100644 --- a/docs/feature_rgblight.md +++ b/docs/feature_rgblight.md @@ -33,12 +33,13 @@ RGBLIGHT_DRIVER = APA102 At minimum you must define the data pin your LED strip is connected to, and the number of LEDs in the strip, in your `config.h`. For APA102 LEDs, you must also define the clock pin. If your keyboard has onboard RGB LEDs, and you are simply creating a keymap, you usually won't need to modify these. -|Define |Description | -|---------------|---------------------------------------------------------------------------------------------------------| -|`RGB_DI_PIN` |The pin connected to the data pin of the LEDs | -|`RGB_CI_PIN` |The pin connected to the clock pin of the LEDs (APA102 only) | -|`RGBLED_NUM` |The number of LEDs connected | -|`RGBLED_SPLIT` |(Optional) For split keyboards, the number of LEDs connected on each half directly wired to `RGB_DI_PIN` | +|Define |Description | +|---------------|-------------------------------------------------------------------------| +|`WS2812_DI_PIN`|The pin connected to the data pin of the LEDs (WS2812) | +|`APA102_DI_PIN`|The pin connected to the data pin of the LEDs (APA102) | +|`APA102_CI_PIN`|The pin connected to the clock pin of the LEDs (APA102) | +|`RGBLED_NUM` |The number of LEDs connected | +|`RGBLED_SPLIT` |(Optional) For split keyboards, the number of LEDs connected on each half| Then you should be able to use the keycodes below to change the RGB lighting to your liking. diff --git a/docs/feature_split_keyboard.md b/docs/feature_split_keyboard.md index c095c8712f..1705ea9222 100644 --- a/docs/feature_split_keyboard.md +++ b/docs/feature_split_keyboard.md @@ -300,6 +300,12 @@ This enables transmitting the pointing device status to the master side of the s This enables triggering of haptic feedback on the slave side of the split keyboard. For DRV2605L this will send the mode, but for solenoids it is expected that the desired mode is already set up on the slave. +```c +#define SPLIT_ACTIVITY_ENABLE +``` + +This synchronizes the activity timestamps between sides of the split keyboard, allowing for activity timeouts to occur. + ### Custom data sync between sides :id=custom-data-sync QMK's split transport allows for arbitrary data transactions at both the keyboard and user levels. This is modelled on a remote procedure call, with the master invoking a function on the slave side, with the ability to send data from master to slave, process it slave side, and send data back from slave to master. diff --git a/docs/feature_stenography.md b/docs/feature_stenography.md index 62d4dabf81..df4c9c6ad3 100644 --- a/docs/feature_stenography.md +++ b/docs/feature_stenography.md @@ -138,7 +138,7 @@ bool post_process_steno_user(uint16_t keycode, keyrecord_t *record, steno_mode_t This function is called after a key has been processed, but before any decision about whether or not to send a chord. This is where to put hooks for things like, say, live displays of steno chords or keys. -If `IS_PRESSED(record->event)` is false, and `n_pressed_keys` is 0 or 1, the chord will be sent shortly, but has not yet been sent. This relieves you of the need of keeping track of where a packet ends and another begins. +If `record->event.pressed` is false, and `n_pressed_keys` is 0 or 1, the chord will be sent shortly, but has not yet been sent. This relieves you of the need of keeping track of where a packet ends and another begins. The `chord` argument contains the packet of the current chord as specified by the protocol in use. This is *NOT* simply a list of chorded steno keys of the form `[STN_E, STN_U, STN_BR, STN_GR]`. Refer to the appropriate protocol section of this document to learn more about the format of the packets in your steno protocol/mode of choice. diff --git a/docs/feature_swap_hands.md b/docs/feature_swap_hands.md index 4d0d554093..e9c1d4b7ba 100644 --- a/docs/feature_swap_hands.md +++ b/docs/feature_swap_hands.md @@ -47,6 +47,11 @@ const uint8_t PROGMEM encoder_hand_swap_config[NUM_ENCODERS] = { 1, 0 }; ### Functions :id=functions -| Function | Description | -|----------------------|---------------------------------------------| -| `is_swap_hands_on()` | Returns true if Swap-Hands is currently on. | +User callback functions to manipulate Swap-Hands: + +| Function | Description | +|-----------------------|---------------------------------------------| +| `swap_hands_on()` | Turns Swap-Hands on. | +| `swap_hands_off()` | Turns Swap-Hands off. | +| `swap_hands_toggle()` | Toggles Swap-Hands. | +| `is_swap_hands_on()` | Returns true if Swap-Hands is currently on. | diff --git a/docs/getting_started_vagrant.md b/docs/getting_started_vagrant.md deleted file mode 100644 index b5b5ce1539..0000000000 --- a/docs/getting_started_vagrant.md +++ /dev/null @@ -1,56 +0,0 @@ -# Vagrant Quick Start - -This project includes a `Vagrantfile` that will allow you to build a new firmware for your keyboard very easily without major changes to your primary operating system. This also ensures that when you clone the project and perform a build, you have the exact same environment as anyone else using the Vagrantfile to build. This makes it much easier for people to help you troubleshoot any issues you encounter. - -## Requirements - -Using the `Vagrantfile` in this repository requires you have [Vagrant](https://www.vagrantup.com/) as well as a supported provider installed: - -* [VirtualBox](https://www.virtualbox.org/) (Version at least 5.0.12) - * Sold as 'the most accessible platform to use Vagrant' -* [VMware Workstation](https://www.vmware.com/products/workstation) and [Vagrant VMware plugin](https://www.vagrantup.com/vmware) - * The (paid) VMware plugin requires a licensed copy of VMware Workstation/Fusion -* [Docker](https://www.docker.com/) - -Other than having Vagrant, a suitable provider installed and possibly a restart of your computer afterwards, you can simple run a 'vagrant up' anywhere inside the folder where you checked out this project and it will start an environment (either a virtual machine or container) that contains all the tools required to build this project. There is a post Vagrant startup hint that will get you off on the right foot, otherwise you can also reference the build documentation below. - -## Flashing the Firmware - -The "easy" way to flash the firmware is using a tool from your host OS: - -* [QMK Toolbox](https://github.com/qmk/qmk_toolbox) (recommended) -* [Teensy Loader](https://www.pjrc.com/teensy/loader.html) - -If you want to program via the command line you can uncomment the ['modifyvm'] lines in the Vagrantfile to enable the USB passthrough into Linux and then program using the command line tools like dfu-util/dfu-programmer or you can install the Teensy CLI version. - -## Vagrantfile Overview -The development environment is configured to run the QMK Docker image, `qmkfm/qmk_cli`. This not only ensures predictability between systems, it also mirrors the CI environment. - -## FAQ - -### Why am I seeing issues under Virtualbox? -Certain versions of Virtualbox 5 appear to have an incompatibility with the Virtualbox extensions installed in the boxes in this Vagrantfile. If you encounter any issues with the /vagrant mount not succeeding, please upgrade your version of Virtualbox to at least 5.0.12. **Alternately, you can try running the following command:** - -``` -vagrant plugin install vagrant-vbguest -``` - -### How do I remove an existing environment? -Finished with your environment? From anywhere inside the folder where you checked out this project, Execute: - -``` -vagrant destroy -``` - -### What if I want to use Docker directly? -Want to benefit from the Vagrant workflow without a virtual machine? The Vagrantfile is configured to bypass running a virtual machine, and run the container directly. Execute the following when bringing up the environment to force the use of Docker: -``` -vagrant up --provider=docker -``` - -### How do I access the virtual machine instead of the Docker container? -Execute the following to bypass the `vagrant` user booting directly to the official qmk builder image: - -``` -vagrant ssh -c 'sudo -i' -``` diff --git a/docs/ja/_summary.md b/docs/ja/_summary.md index 8516a5eaaa..e49853bfd4 100644 --- a/docs/ja/_summary.md +++ b/docs/ja/_summary.md @@ -38,7 +38,6 @@ * [キーマップの概要](ja/keymap.md) * 開発環境 * [Docker のガイド](ja/getting_started_docker.md) - * [Vagrant のガイド](ja/getting_started_vagrant.md) * 書き込み * [書き込み](ja/flashing.md) * [ATmega32A の書き込み (ps2avrgb)](ja/flashing_bootloadhid.md) diff --git a/docs/ja/config_options.md b/docs/ja/config_options.md index 6135721a42..4f9f1f2770 100644 --- a/docs/ja/config_options.md +++ b/docs/ja/config_options.md @@ -159,9 +159,6 @@ QMK での全ての利用可能な設定にはデフォルトがあります。 * 詳細は [Permissive Hold](ja/tap_hold.md#permissive-hold) を見てください * `#define PERMISSIVE_HOLD_PER_KEY` * キーごとの `PERMISSIVE_HOLD` 設定の処理を有効にします -* `#define IGNORE_MOD_TAP_INTERRUPT` - * 両方のキーに `TAPPING_TERM` を適用することで、ホールド時に他のキーに変換するキーを使ってローリングコンボ (zx) をすることができるようにします - * 詳細は [Ignore Mod Tap Interrupt](ja/tap_hold.md#ignore-mod-tap-interrupt) を見てください * `#define TAPPING_FORCE_HOLD` * タップされた直後に、デュアルロールキーを修飾子として使用できるようにします * [Tapping Force Hold](ja/tap_hold.md#tapping-force-hold)を見てください diff --git a/docs/ja/feature_dynamic_macros.md b/docs/ja/feature_dynamic_macros.md index 3cff788007..fa1a1df931 100644 --- a/docs/ja/feature_dynamic_macros.md +++ b/docs/ja/feature_dynamic_macros.md @@ -64,7 +64,7 @@ QMK はその場で作られた一時的なマクロをサポートします。 direction がどのマクロであるかを示すことに注意してください。`1` がマクロ 1、`-1` がマクロ 2、0 がマクロ無しです。 -* `dynamic_macro_record_start_user(void)` - マクロの記録を開始する時に起動されます。 +* `dynamic_macro_record_start_user(int8_t direction)` - マクロの記録を開始する時に起動されます。 * `dynamic_macro_play_user(int8_t direction)` - マクロを再生する時に起動されます。 * `dynamic_macro_record_key_user(int8_t direction, keyrecord_t *record)` - マクロの記録中に各キー押下で起動されます。 * `dynamic_macro_record_end_user(int8_t direction)` - マクロの記録を停止した時に起動されます。 diff --git a/docs/ja/feature_stenography.md b/docs/ja/feature_stenography.md index b280084ae3..9551221696 100644 --- a/docs/ja/feature_stenography.md +++ b/docs/ja/feature_stenography.md @@ -80,7 +80,7 @@ bool process_steno_user(uint16_t keycode, keyrecord_t *record) { return true; } bool post_process_steno_user(uint16_t keycode, keyrecord_t *record, steno_mode_t mode, uint8_t chord[6], int8_t pressed); ``` -この関数はキーが処理された後、ただしコードを送信するかどうかを決める前に呼び出されます。`IS_PRESSED(record->event)` が false で、`pressed` が 0 または 1 の場合は、コードはまもなく送信されますが、まだ送信されてはいません。ここが速記コードあるいはキーのライブ表示などのフックを配置する場所です。 +この関数はキーが処理された後、ただしコードを送信するかどうかを決める前に呼び出されます。`record->event.pressed` が false で、`pressed` が 0 または 1 の場合は、コードはまもなく送信されますが、まだ送信されてはいません。ここが速記コードあるいはキーのライブ表示などのフックを配置する場所です。 ## キーコードリファレンス :id=keycode-reference diff --git a/docs/ja/getting_started_vagrant.md b/docs/ja/getting_started_vagrant.md deleted file mode 100644 index 0888b7f311..0000000000 --- a/docs/ja/getting_started_vagrant.md +++ /dev/null @@ -1,61 +0,0 @@ -# Vagrant クイックスタート - -<!--- - original document: 0.12.43:docs/getting_started_vagrant.md - git diff 0.12.43 HEAD -- docs/getting_started_vagrant.md | cat ---> - -このプロジェクトは、プライマリオペレーティングシステムに大きな変更を加えることなくキーボードの新しいファームウェアを非常に簡単に構築することができる `Vagrantfile` を含みます。これは、あなたがプロジェクトをクローンしビルドを実行した時に、ビルドのために Vagrantfile を使っている他のユーザと全く同じ環境を持つことも保証します。これにより、人々はあなたが遭遇した問題の解決をより簡単に行えるようになります。 - -## 必要事項 - -このリポジトリ内の `Vagrantfile` を使うには、[Vagrant](https://www.vagrantup.com/) およびサポートされるプロバイダがインストールされている必要があります: - -* [VirtualBox](https://www.virtualbox.org/) (バージョン 5.0.12 以降) - * 「Vagrant を使うために最もアクセスしやすいプラットフォーム」とうたわれています。 -* [VMware Workstation](https://www.vmware.com/products/workstation) および [Vagrant VMware プラグイン](https://www.vagrantup.com/vmware) - * (有料) VMware プラグインには、ライセンスされた VMware Workstation/Fusion のコピーが必要です。 -* [Docker](https://www.docker.com/) - -Vagrant 以外に、適切なプロバイダがインストールされ、その後におそらくコンピュータを再起動すると、このプロジェクトをチェックアウトしたフォルダ内の任意の場所で 'vagrant up' を単純に実行することができ、このプロジェクトをビルドするのに必要な全てのツールが含まれる環境(仮想マシンあるいはコンテナ)が開始されます。Vagrant 起動時にうまく始めるためのヒントが表示されますが、それ以外に、以下のビルドドキュメントを参照することもできます。 - -## ファームウェアの書き込み - -ファームウェアを書き込む「簡単な」方法は、ホスト OS からツールを使うことです: - -* [QMK Toolbox](https://github.com/qmk/qmk_toolbox) (推奨) -* [Teensy ローダー](https://www.pjrc.com/teensy/loader.html) - -コマンドラインでプログラムしたい場合は、Vagranfile の ['modifyvm'] 行のコメントを解除して Linux への USB パススルーを有効にし、dfu-util/dfu-programmer のようなコマンドラインツールを使ってプログラムすることができます。あるいは Teensy CLI バージョンをインストールすることができます。 -< |