summaryrefslogtreecommitdiffstats
path: root/docs
diff options
context:
space:
mode:
Diffstat (limited to 'docs')
-rw-r--r--docs/_summary.md1
-rw-r--r--docs/data_driven_config.md59
-rw-r--r--docs/feature_macros.md113
-rw-r--r--docs/feature_mouse_keys.md28
-rw-r--r--docs/feature_rgb_matrix.md22
-rw-r--r--docs/feature_rgblight.md13
-rw-r--r--docs/feature_split_keyboard.md10
-rw-r--r--docs/ja/feature_macros.md113
-rw-r--r--docs/ja/proton_c_conversion.md1
-rw-r--r--docs/proton_c_conversion.md1
-rw-r--r--docs/reference_info_json.md158
-rw-r--r--docs/reference_keymap_extras.md2
-rw-r--r--docs/serial_driver.md1
13 files changed, 284 insertions, 238 deletions
diff --git a/docs/_summary.md b/docs/_summary.md
index 19498f6a20..8d401bb40c 100644
--- a/docs/_summary.md
+++ b/docs/_summary.md
@@ -159,6 +159,7 @@
* [Contributing to QMK](contributing.md)
* [Translating the QMK Docs](translating.md)
* [Config Options](config_options.md)
+ * [Data Driven Configuration](data_driven_config.md)
* [Make Documentation](getting_started_make_guide.md)
* [Documentation Best Practices](documentation_best_practices.md)
* [Documentation Templates](documentation_templates.md)
diff --git a/docs/data_driven_config.md b/docs/data_driven_config.md
new file mode 100644
index 0000000000..7e4f232846
--- /dev/null
+++ b/docs/data_driven_config.md
@@ -0,0 +1,59 @@
+# Data Driven Configuration
+
+This page describes how QMK's data driven JSON configuration system works. It is aimed at developers who want to work on QMK itself.
+
+## History
+
+Historically QMK has been configured through a combination of two mechanisms- `rules.mk` and `config.h`. While this worked well when QMK was only a handful of keyboards we've grown to encompass nearly 1500 supported keyboards. That extrapolates out to 6000 configuration files under `keyboards/` alone! The freeform nature of these files and the unique patterns people have used to avoid duplication have made ongoing maintenance a challenge, and a large number of our keyboards follow patterns that are outdated and sometimes harder to understand.
+
+We have also been working on bringing the power of QMK to people who aren't comformable with a CLI, and other projects such as VIA are working to make using QMK as easy as installing a program. These tools need information about how a keyboard is laid out or what pins and features are available so that users can take full advantage of QMK. We introduced `info.json` as a first step towards this. The QMK API is an effort to combine these 3 sources of information- `config.h`, `rules.mk`, and `info.json`- into a single source of truth that end-user tools can use.
+
+Now we have support for generating `rules.mk` and `config.h` values from `info.json`, allowing us to have a single source of truth. This will allow us to use automated tooling to maintain keyboards saving a lot of time and maintenance work.
+
+## Overview
+
+On the C side of things nothing really changes. When you need to create a new rule or define you follow the same process:
+
+1. Add it to `docs/config_options.md`
+1. Set a default in the appropriate core file
+1. Add your `ifdef` and/or `#ifdef` statements as needed
+
+You will then need to add support for your new configuration to `info.json`. The basic process is:
+
+1. Add it to the schema in `data/schemas/keyboards.jsonschema`
+1. Add code to extract it from `config.h`/`rules.mk` to `lib/python/qmk/info.py`
+1. Add code to generate it to one of:
+ * `lib/python/qmk/cli/generate/config_h.py`
+ * `lib/python/qmk/cli/generate/rules_mk.py`
+
+## Adding an option to info.json
+
+This section describes adding support for a `config.h`/`rules.mk` value to info.json.
+
+### Add it to the schema
+
+QMK maintains schema files in `data/schemas`. The values that go into keyboard-specific `info.json` files are kept in `keyboard.jsonschema`. Any value you want to make available to end users to edit must go in here.
+
+In some cases you can simply add a new top-level key. Some examples to follow are `keyboard_name`, `maintainer`, `processor`, and `url`. This is appropriate when your option is self-contained and not directly related to other options. In other cases you should group like options together in an `object`. This is particularly true when adding support for a feature. Some examples to follow for this are `indicators`, `matrix_pins`, and `rgblight`. If you are not sure how to integrate your new option(s) [open an issue](https://github.com/qmk/qmk_firmware/issues/new?assignees=&labels=cli%2C+python&template=other_issues.md&title=) or [join #cli on Discord](https://discord.gg/heQPAgy) and start a conversation there.
+
+### Add code to extract it
+
+Whenever QMK generates a complete `info.json` it extracts information from `config.h` and `rules.mk`. You will need to add code for your new config value to `lib/python/qmk/info.py`. Typically this means adding a new `_extract_<feature>()` function and then calling your function in either `_extract_config_h()` or `_extract_rules_mk()`.
+
+If you are not sure how to edit this file or are not comfortable with Python [open an issue](https://github.com/qmk/qmk_firmware/issues/new?assignees=&labels=cli%2C+python&template=other_issues.md&title=) or [join #cli on Discord](https://discord.gg/heQPAgy) and someone can help you with this part.
+
+### Add code to generate it
+
+The final piece of the puzzle is providing your new option to the build system. This is done by generating two files:
+
+* `.build/obj_<keyboard>/src/info_config.h`
+* `.build/obj_<keyboard>/src/rules.mk`
+
+These two files are generated by the code here:
+
+* `lib/python/qmk/cli/generate/config_h.py`
+* `lib/python/qmk/cli/generate/rules_mk.py`
+
+For `config.h` values you'll need to write a function for your rule(s) and call that function in `generate_config_h()`.
+
+If you have a new top-level `info.json` key for `rules.mk` you can simply add your keys to `info_to_rules` at the top of `lib/python/qmk/cli/generate/rules_mk.py`. Otherwise you'll need to create a new if block for your feature in `generate_rules_mk()`.
diff --git a/docs/feature_macros.md b/docs/feature_macros.md
index 36fa761d21..aa1ebc337a 100644
--- a/docs/feature_macros.md
+++ b/docs/feature_macros.md
@@ -4,7 +4,7 @@ Macros allow you to send multiple keystrokes when pressing just one key. QMK has
!> **Security Note**: While it is possible to use macros to send passwords, credit card numbers, and other sensitive information it is a supremely bad idea to do so. Anyone who gets a hold of your keyboard will be able to access that information by opening a text editor.
-## The New Way: `SEND_STRING()` & `process_record_user`
+## `SEND_STRING()` & `process_record_user`
Sometimes you want a key to type out words or phrases. For the most common situations, we've provided `SEND_STRING()`, which will type out a string (i.e. a sequence of characters) for you. All ASCII characters that are easily translatable to a keycode are supported (e.g. `qmk 123\n\t`).
@@ -262,15 +262,15 @@ This will clear all keys besides the mods currently pressed.
This macro will register `KC_LALT` and tap `KC_TAB`, then wait for 1000ms. If the key is tapped again, it will send another `KC_TAB`; if there is no tap, `KC_LALT` will be unregistered, thus allowing you to cycle through windows.
```c
-bool is_alt_tab_active = false; # ADD this near the begining of keymap.c
-uint16_t alt_tab_timer = 0; # we will be using them soon.
+bool is_alt_tab_active = false; // ADD this near the begining of keymap.c
+uint16_t alt_tab_timer = 0; // we will be using them soon.
-enum custom_keycodes { # Make sure have the awesome keycode ready
+enum custom_keycodes { // Make sure have the awesome keycode ready
ALT_TAB = SAFE_RANGE,
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- switch (keycode) { # This will do most of the grunt work with the keycodes.
+ switch (keycode) { // This will do most of the grunt work with the keycodes.
case ALT_TAB:
if (record->event.pressed) {
if (!is_alt_tab_active) {
@@ -287,7 +287,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}
-void matrix_scan_user(void) { # The very important timer.
+void matrix_scan_user(void) { // The very important timer.
if (is_alt_tab_active) {
if (timer_elapsed(alt_tab_timer) > 1000) {
unregister_code(KC_LALT);
@@ -296,104 +296,3 @@ void matrix_scan_user(void) { # The very important timer.
}
}
```
-
----
-
-## **(DEPRECATED)** The Old Way: `MACRO()` & `action_get_macro`
-
-!> This is inherited from TMK, and hasn't been updated - it's recommended that you use `SEND_STRING` and `process_record_user` instead.
-
-By default QMK assumes you don't have any macros. To define your macros you create an `action_get_macro()` function. For example:
-
-```c
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
- if (record->event.pressed) {
- switch(id) {
- case 0:
- return MACRO(D(LSFT), T(H), U(LSFT), T(I), D(LSFT), T(1), U(LSFT), END);
- case 1:
- return MACRO(D(LSFT), T(B), U(LSFT), T(Y), T(E), D(LSFT), T(1), U(LSFT), END);
- }
- }
- return MACRO_NONE;
-};
-```
-
-This defines two macros which will be run when the key they are assigned to is pressed. If instead you'd like them to run when the key is released you can change the if statement:
-
- if (!record->event.pressed) {
-
-### Macro Commands
-
-A macro can include the following commands:
-
-* I() change interval of stroke in milliseconds.
-* D() press key.
-* U() release key.
-* T() type key(press and release).
-* W() wait (milliseconds).
-* END end mark.
-
-### Mapping a Macro to a Key
-
-Use the `M()` function within your keymap to call a macro. For example, here is the keymap for a 2-key keyboard:
-
-```c
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- [0] = LAYOUT(
- M(0), M(1)
- ),
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
- if (record->event.pressed) {
- switch(id) {
- case 0:
- return MACRO(D(LSFT), T(H), U(LSFT), T(I), D(LSFT), T(1), U(LSFT), END);
- case 1:
- return MACRO(D(LSFT), T(B), U(LSFT), T(Y), T(E), D(LSFT), T(1), U(LSFT), END);
- }
- }
- return MACRO_NONE;
-};
-```
-
-When you press the key on the left it will type "Hi!" and when you press the key on the right it will type "Bye!".
-
-### Naming Your Macros
-
-If you have a bunch of macros you want to refer to from your keymap while keeping the keymap easily readable you can name them using `#define` at the top of your file.
-
-```c
-#define M_HI M(0)
-#define M_BYE M(1)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- [0] = LAYOUT(
- M_HI, M_BYE
- ),
-};
-```
-
-
-## Advanced Example:
-
-### Single-Key Copy/Paste
-
-This example defines a macro which sends `Ctrl-C` when pressed down, and `Ctrl-V` when released.
-
-```c
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
- switch(id) {
- case 0: {
- if (record->event.pressed) {
- return MACRO( D(LCTL), T(C), U(LCTL), END );
- } else {
- return MACRO( D(LCTL), T(V), U(LCTL), END );
- }
- break;
- }
- }
- return MACRO_NONE;
-};
-```
diff --git a/docs/feature_mouse_keys.md b/docs/feature_mouse_keys.md
index ffde133892..a0d02416f2 100644
--- a/docs/feature_mouse_keys.md
+++ b/docs/feature_mouse_keys.md
@@ -42,6 +42,7 @@ In your keymap you can use the following keycodes to map key presses to mouse ac
Mouse keys supports three different modes to move the cursor:
* **Accelerated (default):** Holding movement keys accelerates the cursor until it reaches its maximum speed.
+* **Kinetic:** Holding movement keys accelerates the cursor with its speed following a quadratic curve until it reaches its maximum speed.
* **Constant:** Holding movement keys moves the cursor at constant speeds.
* **Combined:** Holding movement keys accelerates the cursor until it reaches its maximum speed, but holding acceleration and movement keys simultaneously moves the cursor at constant speeds.
@@ -56,7 +57,8 @@ This is the default mode. You can adjust the cursor and scrolling acceleration u
|Define |Default|Description |
|----------------------------|-------|---------------------------------------------------------|
|`MOUSEKEY_DELAY` |300 |Delay between pressing a movement key and cursor movement|
-|`MOUSEKEY_INTERVAL` |50 |Time between cursor movements |
+|`MOUSEKEY_INTERVAL` |50 |Time between cursor movements in milliseconds |
+|`MOUSEKEY_MOVE_DELTA` |5 |Step size |
|`MOUSEKEY_MAX_SPEED` |10 |Maximum cursor speed at which acceleration stops |
|`MOUSEKEY_TIME_TO_MAX` |20 |Time until maximum cursor speed is reached |
|`MOUSEKEY_WHEEL_DELAY` |300 |Delay between pressing a wheel key and wheel movement |
@@ -73,6 +75,30 @@ Tips:
Cursor acceleration uses the same algorithm as the X Window System MouseKeysAccel feature. You can read more about it [on Wikipedia](https://en.wikipedia.org/wiki/Mouse_keys).
+### Kinetic Mode
+
+This is an extension of the accelerated mode. The kinetic mode uses a quadratic curve on the cursor speed which allows precise movements at the beginning and allows to cover large distances by increasing cursor speed quickly thereafter. You can adjust the cursor and scrolling acceleration using the following settings in your keymap’s `config.h` file:
+
+|Define |Default |Description |
+|--------------------------------------|---------|---------------------------------------------------------------|
+|`MK_KINETIC_SPEED` |undefined|Enable kinetic mode |
+|`MOUSEKEY_DELAY` |8 |Delay between pressing a movement key and cursor movement |
+|`MOUSEKEY_INTERVAL` |8 |Time between cursor movements in milliseconds |
+|`MOUSEKEY_MOVE_DELTA` |25 |Step size for accelerating from initial to base speed |
+|`MOUSEKEY_INITIAL_SPEED` |100 |Initial speed of the cursor in pixel per second |
+|`MOUSEKEY_BASE_SPEED` |1000 |Maximum cursor speed at which acceleration stops |
+|`MOUSEKEY_DECELERATED_SPEED` |400 |Decelerated cursor speed |
+|`MOUSEKEY_ACCELERATED_SPEED` |3000 |Accelerated cursor speed |
+|`MOUSEKEY_WHEEL_INITIAL_MOVEMENTS` |16 |Initial number of movements of the mouse wheel |
+|`MOUSEKEY_WHEEL_BASE_MOVEMENTS` |32 |Maximum number of movements at which acceleration stops |
+|`MOUSEKEY_WHEEL_ACCELERATED_MOVEMENTS`|48 |Accelerated wheel movements |
+|`MOUSEKEY_WHEEL_DECELERATED_MOVEMENTS`|8 |Decelerated wheel movements |
+
+Tips:
+
+* The smoothness of the cursor movement depends on the `MOUSEKEY_INTERVAL` setting. The shorter the interval is set the smoother the movement will be. Setting the value too low makes the cursor unresponsive. Lower settings are possible if the micro processor is fast enough. For example: At an interval of `8` milliseconds, `125` movements per second will be initiated. With a base speed of `1000` each movement will move the cursor by `8` pixels.
+* Mouse wheel movements are implemented differently from cursor movements. While it's okay for the cursor to move multiple pixels at once for the mouse wheel this would lead to jerky movements. Instead, the mouse wheel operates at step size `1`. Setting mouse wheel speed is done by adjusting the number of wheel movements per second.
+
### Constant mode
In this mode you can define multiple different speeds for both the cursor and the mouse wheel. There is no acceleration. `KC_ACL0`, `KC_ACL1` and `KC_ACL2` change the cursor and scroll speed to their respective setting.
diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md
index 7b597143c9..e7ede48395 100644
--- a/docs/feature_rgb_matrix.md
+++ b/docs/feature_rgb_matrix.md
@@ -129,6 +129,28 @@ Configure the hardware via your `config.h`:
---
+### APA102 :id=apa102
+
+There is basic support for APA102 based addressable LED strands. To enable it, add this to your `rules.mk`:
+
+```makefile
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = APA102
+```
+
+Configure the hardware via your `config.h`:
+
+```c
+// The pin connected to the data pin of the LEDs
+#define RGB_DI_PIN D7
+// The pin connected to the clock pin of the LEDs
+#define RGB_CI_PIN D6
+// The number of LEDs connected
+#define DRIVER_LED_TOTAL 70
+```
+
+---
+
From this point forward the configuration is the same for all the drivers. The `led_config_t` struct provides a key electrical matrix to led index lookup table, what the physical position of each LED is on the board, and what type of key or usage the LED if the LED represents. Here is a brief example:
```c
diff --git a/docs/feature_rgblight.md b/docs/feature_rgblight.md
index 844e3e6d76..24a13a1129 100644
--- a/docs/feature_rgblight.md
+++ b/docs/feature_rgblight.md
@@ -10,6 +10,7 @@ Currently QMK supports the following addressable LEDs (however, the white LED in
* WS2811, WS2812, WS2812B, WS2812C, etc.
* SK6812, SK6812MINI, SK6805
+ * APA102
These LEDs are called "addressable" because instead of using a wire per color, each LED contains a small microchip that understands a special protocol sent over a single wire. The chip passes on the remaining data to the next LED, allowing them to be chained together. In this way, you can easily control the color of the individual LEDs.
@@ -21,11 +22,19 @@ On keyboards with onboard RGB LEDs, it is usually enabled by default. If it is n
RGBLIGHT_ENABLE = yes
```
-At minimum you must define the data pin your LED strip is connected to, and the number of LEDs in the strip, in your `config.h`. If your keyboard has onboard RGB LEDs, and you are simply creating a keymap, you usually won't need to modify these.
+For APA102 LEDs, add the following to your `rules.mk`:
+
+```make
+RGBLIGHT_ENABLE = yes
+RGBLIGHT_DRIVER = APA102
+```
+
+At minimum you must define the data pin your LED strip is connected to, and the number of LEDs in the strip, in your `config.h`. For APA102 LEDs, you must also define the clock pin. If your keyboard has onboard RGB LEDs, and you are simply creating a keymap, you usually won't need to modify these.
|Define |Description |
|---------------|---------------------------------------------------------------------------------------------------------|
|`RGB_DI_PIN` |The pin connected to the data pin of the LEDs |
+|`RGB_CI_PIN` |The pin connected to the clock pin of the LEDs (APA102 only) |
|`RGBLED_NUM` |The number of LEDs connected |
|`RGBLED_SPLIT` |(Optional) For split keyboards, the number of LEDs connected on each half directly wired to `RGB_DI_PIN` |
@@ -139,7 +148,7 @@ The following options are used to tweak the various animations:
|`RGBLIGHT_EFFECT_KNIGHT_OFFSET` |`0` |The number of LEDs to start the "Knight" animation from the start of the strip by |
|`RGBLIGHT_RAINBOW_SWIRL_RANGE` |`255` |Range adjustment for the rainbow swirl effect to get different swirls |
|`RGBLIGHT_EFFECT_SNAKE_LENGTH` |`4` |The number of LEDs to light up for the "Snake" animation |
-|`RGBLIGHT_EFFECT_TWINKLE_LIFE` |`75` |Adjusts how quickly each LED brightens and dims when twinkling (in animation steps) |
+|`RGBLIGHT_EFFECT_TWINKLE_LIFE` |`200` |Adjusts how quickly each LED brightens and dims when twinkling (in animation steps) |
|`RGBLIGHT_EFFECT_TWINKLE_PROBABILITY`|`1/127` |Adjusts how likely each LED is to twinkle (on each animation step) |
### Example Usage to Reduce Memory Footprint
diff --git a/docs/feature_split_keyboard.md b/docs/feature_split_keyboard.md
index b234114200..c285e353d4 100644
--- a/docs/feature_split_keyboard.md
+++ b/docs/feature_split_keyboard.md
@@ -181,6 +181,16 @@ If you're having issues with serial communication, you can change this value, as
* **`4`**: about 26kbps
* **`5`**: about 20kbps
+```c
+#define SPLIT_MODS_ENABLE
+```
+
+This enables transmitting modifier state (normal, weak and oneshot) to the non
+primary side of the split keyboard. This adds a few bytes of data to the split
+communication protocol and may impact the matrix scan speed when enabled.
+The purpose of this feature is to support cosmetic use of modifer state (e.g.
+displaying status on an OLED screen).
+
### Hardware Configuration Options
There are some settings that you may need to configure, based on how the hardware is set up.
diff --git a/docs/ja/feature_macros.md b/docs/ja/feature_macros.md
index 14a58ad244..c42a61b5fb 100644
--- a/docs/ja/feature_macros.md
+++ b/docs/ja/feature_macros.md
@@ -9,7 +9,7 @@
!> **セキュリティの注意**: マクロを使って、パスワード、クレジットカード番号、その他の機密情報のいずれも送信することが可能ですが、それは非常に悪い考えです。あなたのキーボードを手に入れた人は誰でもテキストエディタを開いてその情報にアクセスすることができます。
-## 新しい方法: `SEND_STRING()` と `process_record_user`
+## `SEND_STRING()` と `process_record_user`
単語またはフレーズを入力するキーが欲しい時があります。最も一般的な状況のために `SEND_STRING()` を提供しています。これは文字列(つまり、文字のシーケンス)を入力します。簡単にキーコードに変換することができる全ての ASCII 文字がサポートされています (例えば、`qmk 123\n\t`)。
@@ -267,15 +267,15 @@ SEND_STRING(".."SS_TAP(X_END));
このマクロは `KC_LALT` を登録し、`KC_TAB` をタップして、1000ms 待ちます。キーが再度タップされると、別の `KC_TAB` が送信されます; タップが無い場合、`KC_LALT` が登録解除され、ウィンドウを切り替えることができます。
```c
-bool is_alt_tab_active = false; # keymap.c の先頭付近にこれを追加します
-uint16_t alt_tab_timer = 0; # すぐにそれらを使います
+bool is_alt_tab_active = false; // keymap.c の先頭付近にこれを追加します
+uint16_t alt_tab_timer = 0; // すぐにそれらを使います
-enum custom_keycodes { # 素晴らしいキーコードを用意してください
+enum custom_keycodes { // 素晴らしいキーコードを用意してください
ALT_TAB = SAFE_RANGE,
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- switch (keycode) { # これはキーコードを利用したつまらない作業のほとんどを行います。
+ switch (keycode) { // これはキーコードを利用したつまらない作業のほとんどを行います。
case ALT_TAB:
if (record->event.pressed) {
if (!is_alt_tab_active) {
@@ -292,7 +292,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}
-void matrix_scan_user(void) { # とても重要なタイマー
+void matrix_scan_user(void) { // とても重要なタイマー
if (is_alt_tab_active) {
if (timer_elapsed(alt_tab_timer) > 1000) {
unregister_code(KC_LALT);
@@ -301,104 +301,3 @@ void matrix_scan_user(void) { # とても重要なタイマー
}
}
```
-
----
-
-## **(非推奨)** 古い方法: `MACRO()` と `action_get_macro`
-
-!> これは TMK から継承されており、更新されていません - 代わりに `SEND_STRING` と `process_record_user` を使うことをお勧めします。
-
-デフォルトでは、QMK はマクロが無いことを前提としています。マクロを定義するには、`action_get_macro()` 関数を作成します。例えば:
-
-```c
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
- if (record->event.pressed) {
- switch(id) {
- case 0:
- return MACRO(D(LSFT), T(H), U(LSFT), T(I), D(LSFT), T(1), U(LSFT), END);
- case 1:
- return MACRO(D(LSFT), T(B), U(LSFT), T(Y), T(E), D(LSFT), T(1), U(LSFT), END);
- }
- }
- return MACRO_NONE;
-};
-```
-
-これは割り当てられているキーが押された時に実行される2つのマクロを定義します。キーが放された時にそれらを実行したい場合は、if 文を変更することができます。
-
- if (!record->event.pressed) {
-
-### マクロコマンド
-
-マクロは以下のコマンドを含めることができます:
-
-* I() はストロークの間隔をミリ秒単位で変更します。
-* D() はキーを押します。
-* U() はキーを放します。
-* T() はキーをタイプ(押して放す)します。
-* W() は待ちます (ミリ秒)。
-* END 終了マーク。
-
-### マクロをキーにマッピングする
-
-マクロを呼び出すにはキーマップ内で `M()` 関数を使います。例えば、2キーのキーボードのキーマップは以下の通りです:
-
-```c
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- [0] = LAYOUT(
- M(0), M(1)
- ),
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
- if (record->event.pressed) {
- switch(id) {
- case 0:
- return MACRO(D(LSFT), T(H), U(LSFT), T(I), D(LSFT), T(1), U(LSFT), END);
- case 1:
- return MACRO(D(LSFT), T(B), U(LSFT), T(Y), T(E), D(LSFT), T(1), U(LSFT), END);
- }
- }
- return MACRO_NONE;
-};
-```
-
-左側のキーを押すと、"Hi!" を入力し、右側のキーを押すと "Bye!" を入力します。
-
-### マクロに名前を付ける
-
-キーマップを読みやすくしながらキーマップから参照したいマクロがたくさんある場合は、ファイルの先頭で `#define` を使って名前を付けることができます。
-
-```c
-#define M_HI M(0)
-#define M_BYE M(1)
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- [0] = LAYOUT(
- M_HI, M_BYE
- ),
-};
-```
-
-
-## 高度な例:
-
-### 単一キーのコピーと貼り付け
-
-この例は、押された時に `Ctrl-C` を送信し、放される時に `Ctrl-V` を送信するマクロを定義します。
-
-```c
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
- switch(id) {
- case 0: {
- if (record->event.pressed) {
- return MACRO( D(LCTL), T(C), U(LCTL), END );
- } else {
- return MACRO( D(LCTL), T(V), U(LCTL), END );
- }
- break;
- }
- }
- return MACRO_NONE;
-};
-```
diff --git a/docs/ja/proton_c_conversion.md b/docs/ja/proton_c_conversion.md
index 6e4f7dcb66..e7c07413ce 100644
--- a/docs/ja/proton_c_conversion.md
+++ b/docs/ja/proton_c_conversion.md
@@ -51,6 +51,7 @@ Proton C には1つのオンボード LED(C13)しかなく、デフォルトで
```
MCU = STM32F303
+BOARD = QMK_PROTON_C
```
次の変数が存在する場合は削除します。
diff --git a/docs/proton_c_conversion.md b/docs/proton_c_conversion.md
index 1b5e496e74..47511e1b1e 100644
--- a/docs/proton_c_conversion.md
+++ b/docs/proton_c_conversion.md
@@ -44,6 +44,7 @@ To use the Proton C natively, without having to specify `CTPC=yes`, you need to
```
MCU = STM32F303
+BOARD = QMK_PROTON_C
```
Remove these variables if they exist:
diff --git a/docs/reference_info_json.md b/docs/reference_info_json.md
index 3ca62c719e..c9864ea2de 100644
--- a/docs/reference_info_json.md
+++ b/docs/reference_info_json.md
@@ -19,8 +19,20 @@ The `info.json` file is a JSON formatted dictionary with the following keys avai
* Width of the board in Key Units
* `height`
* Height of the board in Key Units
+* `debounce`
+ * How many milliseconds (ms) to wait for debounce to happen. (Default: 5)
+* `diode_direction`
+ * The direction diodes face. See [`DIRECT_PINS` in the hardware configuration](https://docs.qmk.fm/#/config_options?id=hardware-options) for more details.
+* `layout_aliases`
+ * A dictionary containing layout aliases. The key is the alias and the value is a layout in `layouts` it maps to.
* `layouts`
- * Physical Layout representations. See the next section for more detail.
+ * Physical Layout representations. See the [Layout Format](#layout_format) section for more detail.
+* `matrix_pins`
+ * Configure the pins corresponding to columns and rows, or direct pins. See [Matrix Pins](#matrix_pins) for more detail.
+* `rgblight`
+ * Configure the [RGB Lighting feature](feature_rgblight.md). See the [RGB Lighting](#rgb_lighting) section for more detail.
+* `usb`
+ * Configure USB VID, PID, and other parameters. See [USB](#USB) for more detail.
### Layout Format
@@ -49,25 +61,129 @@ All key positions and rotations are specified in relation to the top-left corner
* The width of the key, in Key Units. Ignored if `ks` is provided. Default: `1`
* `h`
* The height of the key, in Key Units. Ignored if `ks` is provided. Default: `1`
-* `r`
- * How many degrees clockwise to rotate the key.
-* `rx`
- * The absolute position of the point to rotate the key around in the horizontal axis. Default: `x`
-* `ry`
- * The absolute position of the point to rotate the key around in the vertical axis. Default: `y`
-* `ks`
- * Key Shape: define a polygon by providing a list of points, in Key Units.
- * **Important**: These are relative to the top-left of the key, not absolute.
- * Example ISO Enter: `[ [0,0], [1.5,0], [1.5,2], [0.25,2], [0.25,1], [0,1], [0,0] ]`
* `label`
* What to name this position in the matrix.
- * This should usually be the same name as what is silkscreened on the PCB at this location.
-
-## How is the Metadata Exposed?
-
-This metadata is primarily used in two ways:
-
-* To allow web-based configurators to dynamically generate UI
-* To support the new `make keyboard:keymap:qmk` target, which bundles this metadata up with the firmware to allow QMK Toolbox to be smarter.
-
-Configurator authors can see the [QMK Compiler](https://docs.api.qmk.fm/using-the-api) docs for more information on using the JSON API.
+ * This should usually correspond to the keycode for the first layer of the default keymap.
+* `matrix`
+ * A 2 item list describing the row and column location for this key.
+
+### Matrix Pins
+
+Currently QMK supports connecting switches either directly to GPIO pins or via a switch matrix. At this time you can not combine these, they are mutually exclusive.
+
+#### Switch Matrix
+
+Most keyboards use a switch matrix to connect keyswitches to the MCU. You can define your pin columns and rows to configure your switch matrix. When defining switch matrices you should also define your `diode_direction`.
+
+Example:
+
+```json
+{
+ "diode_direction": "COL2ROW",
+ "matrix_pins": {
+ "cols": ["F4", "E6", "B1", "D2"],
+ "rows": ["B0", "D3", "D5", "D4", "D6"]
+ }
+}
+```
+
+#### Direct Pins
+
+Direct pins are when you connect one side of the switch to GND and the other side to a GPIO pin on your MCU. No diode is required, but there is a 1:1 mapping between switches and pins.
+
+When specifying direct pins you need to arrange them in nested arrays. The outer array consists of rows, while the inner array is a text string corresponding to a pin. You can use `null` to indicate an empty spot in the matrix.
+
+Example:
+
+```json
+{
+ "matrix_pins": {
+ "direct": [
+ ["A10", "A9"],
+ ["A0", "B8"],
+ [null, "B11"],
+ ["B9", "A8"],
+ ["A7", "B1"],
+ [null, "B2"]
+ ]
+ }
+}
+```
+
+### RGB Lighting
+
+This section controls the legacy WS2812 support in QMK. This should not be confused with the RGB Matrix feature, which can be used to control both WS2812 and ISSI RGB LEDs.
+
+The following items can be set. Not every value is required.
+
+* `led_count`
+ * The number of LEDs in your strip
+* `pin`
+ * The GPIO pin that your LED strip is connected to
+* `animations`
+ * A dictionary that lists enabled and disabled animations. See [RGB Light Animations](#rgb_light_animations) below.
+* `sleep`
+ * Set to `true` to enable lighting during host sleep
+* `split`
+ * Set to `true` to enable synchronization functionality between split halves
+* `split_count`
+ * For split keyboards, the number of LEDs on each side
+* `max_brightness`
+ * (0-255) What the maxmimum brightness (value) level is
+* `hue_steps`
+ * How many steps of adjustment to have for hue
+* `saturation_steps`
+ * How many steps of adjustment to have for saturation
+* `brightness_steps`
+ * How many steps of adjustment to have for brightness (value)
+
+Example:
+
+```json
+{
+ "rgblight": {
+ "led_count": 4,
+ "pin": "F6",
+ "hue_steps": 10,
+ "saturation_steps": 17,
+ "brightness_steps": 17,
+ "animations": {
+ "all": true
+ }
+ }
+}
+```
+
+#### RGB Light Animations
+
+The following animations can be enabled:
+
+| Key | Description |
+|-----|-------------|
+| `all` | Enable all additional animation modes. |
+| `alternating` | Enable alternating animation mode. |
+| `breathing` | Enable breathing animation mode. |
+| `christmas` | Enable christmas animation mode. |
+| `knight` | Enable knight animation mode. |
+| `rainbow_mood` | Enable rainbow mood animation mode. |
+| `rainbow_swirl` | Enable rainbow swirl animation mode. |
+| `rgb_test` | Enable RGB test animation mode. |
+| `snake` | Enable snake animation mode. |
+| `static_gradient` | Enable static gradient mode. |
+| `twinkle` | Enable twinkle animation mode. |
+
+### USB
+
+Every USB keyboard needs to have its USB parmaters defined. At a minimum you need to set vid, pid, and device version.
+
+Example:
+
+```json
+{
+ "usb": {
+ "vid": "0xC1ED",
+ "pid": "0x23B0",
+ "device_ver": "0x0001"
+ }
+}
+```
diff --git a/docs/reference_keymap_extras.md b/docs/reference_keymap_extras.md
index f2abb4e596..40a1956844 100644
--- a/docs/reference_keymap_extras.md
+++ b/docs/reference_keymap_extras.md
@@ -18,7 +18,9 @@ To use these, simply `#include` the corresponding [header file](https://github.c
|Dutch (Belgium) |`keymap_belgian.h` |
|English (Ireland) |`keymap_irish.h` |
|English (UK) |`keymap_uk.h` |
+|English (US Extended) |`keymap_us_extended.h` |
|English (US International) |`keymap_us_international.h` |
+|English (US International, Linux)|`keymap_us_international_linux.h`|
|Estonian |`keymap_estonian.h` |
|Finnish |`keymap_finnish.h` |
|French |`keymap_french.h` |
diff --git a/docs/serial_driver.md b/docs/serial_driver.md
index bc376b6ddd..c98f4c1176 100644
--- a/docs/serial_driver.md
+++ b/docs/serial_driver.md
@@ -60,6 +60,7 @@ Configure the hardware via your config.h:
// 5: about 19200 baud
#define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1
#define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
+#define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100
```
You must also enable the ChibiOS `SERIAL` feature: