summaryrefslogtreecommitdiffstats
path: root/docs
diff options
context:
space:
mode:
Diffstat (limited to 'docs')
-rw-r--r--docs/feature_rgb_matrix.md2
-rw-r--r--docs/keycodes.md3
-rw-r--r--docs/one_shot_keys.md3
-rw-r--r--docs/ws2812_driver.md3
4 files changed, 11 insertions, 0 deletions
diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md
index 6917de5ab4..a83e1d2a21 100644
--- a/docs/feature_rgb_matrix.md
+++ b/docs/feature_rgb_matrix.md
@@ -441,6 +441,8 @@ These are defined in [`rgblight_list.h`](https://github.com/qmk/qmk_firmware/blo
#define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS // Sets the default brightness value, if none has been set
#define RGB_MATRIX_STARTUP_SPD 127 // Sets the default animation speed, if none has been set
#define RGB_MATRIX_DISABLE_KEYCODES // disables control of rgb matrix by keycodes (must use code functions to control the feature)
+#define RGB_MATRIX_SPLIT { X, Y } // (Optional) For split keyboards, the number of LEDs connected on each half. X = left, Y = Right.
+ // If RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is enabled, you also will want to enable SPLIT_TRANSPORT_MIRROR
```
## EEPROM storage :id=eeprom-storage
diff --git a/docs/keycodes.md b/docs/keycodes.md
index 9acf8b6839..f3c519b130 100644
--- a/docs/keycodes.md
+++ b/docs/keycodes.md
@@ -516,6 +516,9 @@ See also: [One Shot Keys](one_shot_keys.md)
|------------|----------------------------------|
|`OSM(mod)` |Hold `mod` for one keypress |
|`OSL(layer)`|Switch to `layer` for one keypress|
+|`OS_ON` |Turns One Shot keys on |
+|`OS_OFF` |Turns One Shot keys off |
+|`OS_TOGG` |Toggles One Shot keys status |
## Space Cadet :id=space-cadet
diff --git a/docs/one_shot_keys.md b/docs/one_shot_keys.md
index 9a082d7d6d..9fc5486299 100644
--- a/docs/one_shot_keys.md
+++ b/docs/one_shot_keys.md
@@ -17,6 +17,9 @@ You can control the behavior of one shot keys by defining these in `config.h`:
* `OSM(mod)` - Momentarily hold down *mod*. You must use the `MOD_*` keycodes as shown in [Mod Tap](mod_tap.md), not the `KC_*` codes.
* `OSL(layer)` - momentary switch to *layer*.
+* `OS_ON` - Turns on One Shot keys.
+* `OS_OFF` - Turns off One Shot keys. OSM act as regular mod keys, OSL act like `MO`.
+* `ON_TOGG` - Toggles the one shot key status.
Sometimes, you want to activate a one-shot key as part of a macro or tap dance routine.
diff --git a/docs/ws2812_driver.md b/docs/ws2812_driver.md
index cca6827ec8..fa14f02fdb 100644
--- a/docs/ws2812_driver.md
+++ b/docs/ws2812_driver.md
@@ -102,11 +102,14 @@ Configure the hardware via your config.h:
#define WS2812_PWM_DRIVER PWMD2 // default: PWMD2
#define WS2812_PWM_CHANNEL 2 // default: 2
#define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
+//#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy).
#define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
#define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
#define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM2_UP // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU.
```
+Note that using a complementary timer output (TIMx_CHyN) is possible only for advanced-control timers (TIM1, TIM8, TIM20 on STM32), and the `STM32_PWM_USE_ADVANCED` option in mcuconf.h must be set to `TRUE`. Complementary outputs of general-purpose timers are not supported due to ChibiOS limitations.
+
You must also turn on the PWM feature in your halconf.h and mcuconf.h
#### Testing Notes