24 files changed, 626 insertions, 360 deletions

diff --git a/docs/breaking_changes.md b/docs/breaking_changes.md
index e660182c32..f4560b746f 100644
--- a/docs/breaking_changes.md
+++ b/docs/breaking_changes.md
@@ -119,6 +119,7 @@ This happens immediately after the previous `develop` branch is merged to `maste
     * `git commit -m 'Branch point for <DATE> Breaking Change'`
     * `git tag breakpoint_<YYYY>_<MM>_<DD>`
     * `git push upstream breakpoint_<YYYY>_<MM>_<DD>`
+    * `git push upstream develop`
 
 * All submodules under `lib` now need to be checked against their QMK-based forks:
     * `git submodule foreach git log -n1`
diff --git a/docs/compatible_microcontrollers.md b/docs/compatible_microcontrollers.md
index cc9c0b7f92..197033f78b 100644
--- a/docs/compatible_microcontrollers.md
+++ b/docs/compatible_microcontrollers.md
@@ -43,6 +43,8 @@ You can also use any ARM chip with USB that [ChibiOS](https://www.chibios.org) s
  * [STM32F446](https://www.st.com/en/microcontrollers-microprocessors/stm32f446.html)
  * [STM32G431](https://www.st.com/en/microcontrollers-microprocessors/stm32g4x1.html)
  * [STM32G474](https://www.st.com/en/microcontrollers-microprocessors/stm32g4x4.html)
+ * [STM32H723](https://www.st.com/en/microcontrollers-microprocessors/stm32h723-733.html)
+ * [STM32H733](https://www.st.com/en/microcontrollers-microprocessors/stm32h723-733.html)
  * [STM32L412](https://www.st.com/en/microcontrollers-microprocessors/stm32l4x2.html)
  * [STM32L422](https://www.st.com/en/microcontrollers-microprocessors/stm32l4x2.html)
  * [STM32L432](https://www.st.com/en/microcontrollers-microprocessors/stm32l4x2.html)
diff --git a/docs/data_driven_config.md b/docs/data_driven_config.md
index ba287f5688..b288f9901a 100644
--- a/docs/data_driven_config.md
+++ b/docs/data_driven_config.md
@@ -79,8 +79,8 @@ If you are not sure how to edit this file or are not comfortable with Python [op
 
 The final piece of the puzzle is providing your new option to the build system. This is done by generating two files:
 
-* `.build/obj_<keyboard>/src/info_config.h`
-* `.build/obj_<keyboard>/src/rules.mk`
+* `.build/obj_<keyboard>_<keymap>/src/info_config.h`
+* `.build/obj_<keyboard>_<keymap>/src/rules.mk`
 
 These two files are generated by the code here:
 
diff --git a/docs/feature_auto_shift.md b/docs/feature_auto_shift.md
index 1719807e26..6241cbaeb1 100644
--- a/docs/feature_auto_shift.md
+++ b/docs/feature_auto_shift.md
@@ -133,7 +133,17 @@ groups in the below fallback switch.
 ### NO_AUTO_SHIFT_SPECIAL (simple define)
 
 Do not Auto Shift special keys, which include -\_, =+, [{, ]}, ;:, '", ,<, .>,
-and /?
+/?, and the KC_TAB.
+
+### NO_AUTO_SHIFT_TAB (simple define)
+
+Do not Auto Shift KC_TAB but leave Auto Shift enabled for the other special
+characters.
+
+### NO_AUTO_SHIFT_SYMBOLS (simple define)
+
+Do not Auto Shift symbol keys, which include -\_, =+, [{, ]}, ;:, '", ,<, .>,
+and /?.
 
 ### NO_AUTO_SHIFT_NUMERIC (simple define)
 
@@ -143,9 +153,13 @@ Do not Auto Shift numeric keys, zero through nine.
 
 Do not Auto Shift alpha characters, which include A through Z.
 
+### AUTO_SHIFT_ENTER (simple define)
+
+Auto Shift the enter key.
+
 ### Auto Shift Per Key
 
-There are functions that allows you to determine which keys shold be autoshifted, much like the tap-hold keys.
+There are functions that allows you to determine which keys should be autoshifted, much like the tap-hold keys.
 
 The first of these, used to simply add a key to Auto Shift, is `get_custom_auto_shifted_key`:
 
@@ -172,9 +186,15 @@ bool get_auto_shifted_key(uint16_t keycode, keyrecord_t *record) {
         case KC_1 ... KC_0:
 #    endif
 #    ifndef NO_AUTO_SHIFT_SPECIAL
+#    ifndef NO_AUTO_SHIFT_TAB
         case KC_TAB:
-        case KC_MINUS ... KC_SLASH:
-        case KC_NONUS_BACKSLASH:
+#    endif
+#    ifndef NO_AUTO_SHIFT_SYMBOLS
+        case AUTO_SHIFT_SYMBOLS:
+#    endif
+#    endif
+#    ifdef AUTO_SHIFT_ENTER
+        case KC_ENT:
 #    endif
             return true;
     }
@@ -192,6 +212,25 @@ Enables keyrepeat.
 
 Disables automatically keyrepeating when `AUTO_SHIFT_TIMEOUT` is exceeded.
 
+
+### AUTO_SHIFT_ALPHA (predefined key group)
+
+A predefined group of keys representing A through Z.
+
+### AUTO_SHIFT_NUMERIC (predefined key group)
+
+A predefined group of keys representing 0 through 9. Note, these are defined as
+1 through 0 since that is the order they normally appear in.
+
+### AUTO_SHIFT_SYMBOLS (predefined key group)
+
+A predefined group of keys representing symbolic characters which include -\_, =+, [{, ]}, ;:, '", ,<, .>,
+and /?.
+
+### AUTO_SHIFT_SPECIAL (predefined key group)
+
+A predefined group of keys that combines AUTO_SHIFT_SYMBOLS and KC_TAB.
+
 ## Custom Shifted Values
 
 Especially on small keyboards, the default shifted value for many keys is not
diff --git a/docs/feature_autocorrect.md b/docs/feature_autocorrect.md
index 9f80c93f82..3a0a49095c 100644
--- a/docs/feature_autocorrect.md
+++ b/docs/feature_autocorrect.md
@@ -198,7 +198,9 @@ bool process_autocorrect_user(uint16_t *keycode, keyrecord_t *record, uint8_t *t
 
 ### Apply Autocorrect
 
-Additionally, `apply_autocorrect(uint8_t backspaces, const char *str)` allows for users to add additional handling to the autocorrection, or replace the functionality entirely. This passes on the number of backspaces needed to replace the words, as well as the replacement string (partial word, not the full word).
+Additionally, `apply_autocorrect(uint8_t backspaces, const char *str, char *typo, char *correct)` allows for users to add additional handling to the autocorrection, or replace the functionality entirely. This passes on the number of backspaces needed to replace the words, as well as the replacement string (partial word, not the full word), and the typo and corrected strings (complete words).
+
+?> Due to the way code works (no notion of words, just a stream of letters), the `typo` and `correct` strings are a best bet and could be "wrong". For example you may get `wordtpyo` & `wordtypo` instead of the expected `tpyo` & `typo`. 
 
 #### Apply Autocorrect Example
 
@@ -209,7 +211,7 @@ This following example will play a sound when a typo is autocorrected and execut
 float autocorrect_song[][2] = SONG(TERMINAL_SOUND);
 #endif
 
-bool apply_autocorrect(uint8_t backspaces, const char *str) {
+bool apply_autocorrect(uint8_t backspaces, const char *str, char *typo, char *correct) {
 #ifdef AUDIO_ENABLE
     PLAY_SONG(autocorrect_song);
 #endif
@@ -223,15 +225,18 @@ bool apply_autocorrect(uint8_t backspaces, const char *str) {
 
 ?> In this callback function, `return false` will stop the normal processing of autocorrect, which requires manually handling of removing the "bad" characters and typing the new characters.
 
-!> ***IMPORTANT***: `str` is a pointer to `PROGMEM` data for the autocorrection.  If you return false, and want to send the string, this needs to use `send_string_P` and not `send_string` or `SEND_STRING`.
+!> ***IMPORTANT***: `str` is a pointer to `PROGMEM` data for the autocorrection.  If you return false, and want to send the string, this needs to use `send_string_P` and not `send_string` nor `SEND_STRING`.
 
 You can also use `apply_autocorrect` to detect and display the event but allow internal code to execute the autocorrection with `return true`:
 
 ```c
-bool apply_autocorrect(uint8_t backspaces, const char *str) {
+bool apply_autocorrect(uint8_t backspaces, const char *str, char *typo, char *correct) {
 #ifdef OLED_ENABLE
     oled_write_P(PSTR("Auto-corrected"), false);
 #endif
+#ifdef CONSOLE_ENABLE
+    printf("'%s' was corrected to '%s'\n", typo, correct);
+#endif
     return true;
 }
 ```
diff --git a/docs/feature_backlight.md b/docs/feature_backlight.md
index 24057c608f..d032c33f18 100644
--- a/docs/feature_backlight.md
+++ b/docs/feature_backlight.md
@@ -1,12 +1,12 @@
 # Backlighting :id=backlighting
 
-Many keyboards support backlit keys by way of individual LEDs placed through or underneath the keyswitches. This feature is distinct from both the [RGB underglow](feature_rgblight.md) and [RGB matrix](feature_rgb_matrix.md) features as it usually allows for only a single colour per switch, though you can obviously install multiple different single coloured LEDs on a keyboard.
+Many keyboards support backlit keys by way of individual LEDs placed through or underneath the keyswitches. This feature is distinct from both the [RGB Underglow](feature_rgblight.md) and [RGB Matrix](feature_rgb_matrix.md) features as it usually allows for only a single colour per switch, though you can obviously install multiple different single coloured LEDs on a keyboard.
 
 QMK is able to control the brightness of these LEDs by switching them on and off rapidly in a certain ratio, a technique known as *Pulse Width Modulation*, or PWM. By altering the duty cycle of the PWM signal, it creates the illusion of dimming.
 
-The MCU can only supply so much current to its GPIO pins. Instead of powering the backlight directly from the MCU, the backlight pin is connected to a transistor or MOSFET that switches the power to the LEDs.
+## Usage :id=usage
 
-Most keyboards have backlighting enabled by default if they support it, but if it is not working for you, check that your `rules.mk` includes the following:
+Most keyboards have backlighting enabled by default if they support it, but if it is not working for you (or you have added support), check that your `rules.mk` includes the following:
 
 ```make
 BACKLIGHT_ENABLE = yes
@@ -14,57 +14,23 @@ BACKLIGHT_ENABLE = yes
 
 ## Keycodes :id=keycodes
 
-Once enabled, the following keycodes below can be used to change the backlight level.
+|Key                            |Aliases  |Description                        |
+|-------------------------------|---------|-----------------------------------|
+|`QK_BACKLIGHT_TOGGLE`          |`BL_TOGG`|Turn the backlight on or off       |
+|`QK_BACKLIGHT_STEP`            |`BL_STEP`|Cycle through backlight levels     |
+|`QK_BACKLIGHT_ON`              |`BL_ON`  |Set the backlight to max brightness|
+|`QK_BACKLIGHT_OFF`             |`BL_OFF` |Turn the backlight off             |
+|`QK_BACKLIGHT_UP`              |`BL_UP`  |Increase the backlight level       |
+|`QK_BACKLIGHT_DOWN`            |`BL_DOWN`|Decrease the backlight level       |
+|`QK_BACKLIGHT_TOGGLE_BREATHING`|`BL_BRTG`|Toggle backlight breathing         |
 
-| Key                             | Aliases   | Description                         |
-|---------------------------------|-----------|-------------------------------------|
-| `QK_BACKLIGHT_TOGGLE`           | `BL_TOGG` | Turn the backlight on or off        |
-| `QK_BACKLIGHT_STEP`             | `BL_STEP` | Cycle through backlight levels      |
-| `QK_BACKLIGHT_ON`               | `BL_ON`   | Set the backlight to max brightness |
-| `QK_BACKLIGHT_OFF`              | `BL_OFF`  | Turn the backlight off              |
-| `QK_BACKLIGHT_UP`               | `BL_UP`   | Increase the backlight level        |
-| `QK_BACKLIGHT_DOWN`             | `BL_DOWN` | Decrease the backlight level        |
-| `QK_BACKLIGHT_TOGGLE_BREATHING` | `BL_BRTG` | Toggle backlight breathing          |
+## Basic Configuration :id=basic-configuration
 
-## Functions :id=functions
-
-These functions can be used to change the backlighting in custom code:
-
-|Function                |Description                                 |
-|------------------------|--------------------------------------------|
-|`backlight_toggle()`    |Turn the backlight on or off                |
-|`backlight_enable()`    |Turn the backlight on                       |
-|`backlight_disable()`   |Turn the backlight off                      |
-|`backlight_step()`      |Cycle through backlight levels              |
-|`backlight_increase()`  |Increase the backlight level                |
-|`backlight_decrease()`  |Decrease the backlight level                |
-|`backlight_level(x)`    |Sets the backlight level to specified level |
-|`get_backlight_level()` |Return the current backlight level          |
-|`is_backlight_enabled()`|Return whether the backlight is currently on|
-
-If backlight breathing is enabled (see below), the following functions are also available:
-
-|Function             |Description                           |
-|---------------------|--------------------------------------|
-|`breathing_toggle()` |Turn the backlight breathing on or off|
-|`breathing_enable()` |Turns on backlight breathing          |
-|`breathing_disable()`|Turns off backlight breathing         |
-
-## Configuration :id=configuration
-
-To select which driver to use, configure your `rules.mk` with the following:
-
-```make
-BACKLIGHT_DRIVER = software
-```
-
-Valid driver values are `pwm`, `software`, `custom` or `no`. See below for help on individual drivers.
-
-To configure the backlighting, `#define` these in your `config.h`:
+Add the following to your `config.h`:
 
 |Define                       |Default           |Description                                                                                                      |
 |-----------------------------|------------------|-----------------------------------------------------------------------------------------------------------------|
-|`BACKLIGHT_PIN`              |*Not defined*     |The pin that controls the LED(s)                                                                                 |
+|`BACKLIGHT_PIN`              |*Not defined*     |The pin that controls the LEDs                                                                                   |
 |`BACKLIGHT_LEVELS`           |`3`               |The number of brightness levels (maximum 31 excluding off)                                                       |
 |`BACKLIGHT_CAPS_LOCK`        |*Not defined*     |Enable Caps Lock indicator using backlight (for keyboards without dedicated LED)                                 |
 |`BACKLIGHT_BREATHING`        |*Not defined*     |Enable backlight breathing, if supported                                                                         |
@@ -76,24 +42,88 @@ To configure the backlighting, `#define` these in your `config.h`:
 
 Unless you are designing your own keyboard, you generally should not need to change the `BACKLIGHT_PIN` or `BACKLIGHT_ON_STATE`.
 
-### Backlight On State :id=backlight-on-state
+### "On" State :id=on-state
 
 Most backlight circuits are driven by an N-channel MOSFET or NPN transistor. This means that to turn the transistor *on* and light the LEDs, you must drive the backlight pin, connected to the gate or base, *high*.
 Sometimes, however, a P-channel MOSFET, or a PNP transistor is used. In this case, when the transistor is on, the pin is driven *low* instead.
 
-This functionality is configured at the keyboard level with the `BACKLIGHT_ON_STATE` define.
+To configure the "on" state of the backlight circuit, add the following to your `config.h`:
+
+```c
+#define BACKLIGHT_ON_STATE 0
+```
+
+### Multiple Backlight Pins :id=multiple-backlight-pins
+
+Most keyboards have only one backlight pin which controls all backlight LEDs (especially if the backlight is connected to a hardware PWM pin).
+The `timer` and `software` drivers allow you to define multiple backlight pins, which will be turned on and off at the same time during the PWM duty cycle.
+
+This feature allows to set, for instance, the Caps Lock LED's (or any other controllable LED) brightness at the same level as the other LEDs of the backlight. This is useful if you have mapped Control in place of Caps Lock and you need the Caps Lock LED to be part of the backlight instead of being activated when Caps Lock is on, as it is usually wired to a separate pin from the backlight.
+
+To configure multiple backlight pins, add something like this to your `config.h`, instead of `BACKLIGHT_PIN`:
+
+```c
+#define BACKLIGHT_PINS { F5, B2 }
+```
+
+## Driver Configuration :id=driver-configuration
+
+Backlight driver selection is configured in `rules.mk`. Valid drivers are `pwm` (default), `timer`, `software`, or `custom`. See below for information on individual drivers.
 
-### AVR Driver :id=avr-driver
+### PWM Driver :id=pwm-driver
 
-The `pwm` driver is configured by default, however the equivalent setting within `rules.mk` would be:
+This is the default backlight driver, which leverages the hardware PWM output capability of the microcontroller.
 
 ```make
 BACKLIGHT_DRIVER = pwm
 ```
 
-#### Caveats :id=avr-caveats
+### Timer Driver :id=timer-driver
+
+This driver is similar to the PWM driver, but instead of directly configuring the pin to output a PWM signal, an interrupt handler is attached to the timer to turn the pin on and off as appropriate.
+
+```make
+BACKLIGHT_DRIVER = timer
+```
+
+### Software Driver :id=software-driver
+
+In this mode, PWM is "emulated" while running other keyboard tasks. It offers maximum hardware compatibility without extra platform configuration. However, breathing is not supported, and the backlight can flicker when the keyboard is busy.
+
+```make
+BACKLIGHT_DRIVER = software
+```
+
+### Custom Driver :id=custom-driver
+
+If none of the above drivers apply to your board (for example, you are using a separate IC to control the backlight), you can implement a custom backlight driver using a simple API.
+
+```make
+BACKLIGHT_DRIVER = custom
+```
+
+```c
+void backlight_init_ports(void) {
+    // Optional - runs on startup
+    //   Usually you want to configure pins here
+}
+void backlight_set(uint8_t level) {
+    // Optional - runs on level change
+    //   Usually you want to respond to the new value
+}
+
+void backlight_task(void) {
+    // Optional - runs periodically
+    //   Note that this is called in the main keyboard loop,
+    //   so long running actions here can cause performance issues
+}
+```
+
+## AVR Configuration :id=avr-configuration
+
+### PWM Driver :id=avr-pwm-driver
 
-On AVR boards, QMK automatically decides which driver to use according to the following table:
+The following table describes the supported pins for the PWM driver. Only cells marked with a timer number are capable of hardware PWM output; any others must use the `timer` driver.
 
 |Backlight Pin|AT90USB64/128|AT90USB162|ATmega16/32U4|ATmega16/32U2|ATmega32A|ATmega328/P|
 |-------------|-------------|----------|-------------|-------------|---------|-----------|
@@ -108,113 +138,169 @@ On AVR boards, QMK automatically decides which driver to use according to the fo
 |`D4`         |             |          |             |             |Timer 1  |           |
 |`D5`         |             |          |             |             |Timer 1  |           |
 
-All other pins will use timer-assisted software PWM:
+### Timer Driver :id=avr-timer-driver
 
-|Audio Pin|Audio Timer|Software PWM Timer|
-|---------|-----------|------------------|
-|`C4`     |Timer 3    |Timer 1           |
-|`C5`     |Timer 3    |Timer 1           |
-|`C6`     |Timer 3    |Timer 1           |
-|`B5`     |Timer 1    |Timer 3           |
-|`B6`     |Timer 1    |Timer 3           |
-|`B7`     |Timer 1    |Timer 3           |
+Any GPIO pin can be used with this driver. The following table describes the supported timers:
 
-When both timers are in use for Audio, the backlight PWM cannot use a hardware timer, and will instead be triggered during the matrix scan. In this case, breathing is not supported, and the backlight might flicker, because the PWM computation may not be called with enough timing precision.
+|AT90USB64/128|AT90USB162|ATmega16/32U4|ATmega16/32U2|ATmega32A|ATmega328/P|
+|-------------|----------|-------------|-------------|---------|-----------|
+|Timers 1 & 3 |Timer 1   |Timers 1 & 3 |Timer 1      |Timer 1  |Timer 1    |
 
-#### Hardware PWM Implementation :id=hardware-pwm-implementation
+The following `#define`s apply only to the `timer` driver:
 
-When using the supported pins for backlighting, QMK will use a hardware timer configured to output a PWM signal. This timer will count up to `ICRx` (by default `0xFFFF`) before resetting to 0.
-The desired brightness is calculated and stored in the `OCRxx` register. When the counter reaches this value, the backlight pin will go low, and is pulled high again when the counter resets.
-In this way `OCRxx` essentially controls the duty cycle of the LEDs, and thus the brightness, where `0x0000` is completely off and `0xFFFF` is completely on.
+|Define                 |Default|Description     |
+|-----------------------|-------|----------------|
+|`BACKLIGHT_PWM_TIMER`  |`1`    |The timer to use|
 
-The breathing effect is achieved by registering an interrupt handler for `TIMER1_OVF_vect` that is called whenever the counter resets, roughly 244 times per second.
-In this handler, the value of an incrementing counter is mapped onto a precomputed brightness curve. To turn off breathing, the interrupt handler is simply disabled, and the brightness reset to the level stored in EEPROM.
+Note that the choice of timer may conflict with the [Audio](feature_audio.md) feature.
 
-#### Timer Assisted PWM Implementation :id=timer-assisted-implementation
+## ChibiOS/ARM Configuration :id=arm-configuration
 
-When `BACKLIGHT_PIN` is not set to a hardware backlight pin, QMK will use a hardware timer configured to trigger software interrupts. This time will count up to `ICRx` (by default `0xFFFF`) before resetting to 0.
-When resetting to 0, the CPU will fire an OVF (overflow) interrupt that will turn the LEDs on, starting the duty cycle.
-The desired brightness is calculated and stored in the `OCRxx` register. When the counter reaches this value, the CPU will fire a Compare Output match interrupt, which will turn the LEDs off.
-In this way `OCRxx` essentially controls the duty cycle of the LEDs, and thus the brightness, where `0x0000` is completely off and `0xFFFF` is completely on.
+### PWM Driver :id=arm-pwm-driver
 
-The breathing effect is the same as in the hardware PWM implementation.
+Depending on the ChibiOS board configuration, you may need to enable PWM at the keyboard level. For STM32, this would look like:
 
-### ARM Driver :id=arm-configuration
+`halconf.h`:
+```c
+#define HAL_USE_PWM TRUE
+```
+`mcuconf.h`:
+```c
+#undef STM32_PWM_USE_TIM4
+#define STM32_PWM_USE_TIM4 TRUE
+```
 
-While still in its early stages, ARM backlight support aims to eventually have feature parity with AVR. The `pwm` driver is configured by default, however the equivalent setting within `rules.mk` would be:
+The following `#define`s apply only to the `pwm` driver:
 
-```make
-BACKLIGHT_DRIVER = pwm
+|Define                 |Default |Description                        |
+|-----------------------|--------|-----------------------------------|
+|`BACKLIGHT_PWM_DRIVER` |`PWMD4` |The PWM driver to use              |
+|`BACKLIGHT_PWM_CHANNEL`|`3`     |The PWM channel to use             |
+|`BACKLIGHT_PAL_MODE`   |`2`     |The pin alternative function to use|
+
+Refer to the ST datasheet for your particular MCU to determine these values. For example, these defaults are set up for pin `B8` on a Proton-C (STM32F303) using `TIM4_CH3` on AF2. Unless you are designing your own keyboard, you generally should not need to change them.
+
+### Timer Driver :id=arm-timer-driver
+
+Depending on the ChibiOS board configuration, you may need to enable general-purpose timers at the keyboard level. For STM32, this would look like:
+
+`halconf.h`:
+```c
+#define HAL_USE_GPT TRUE
+```
+`mcuconf.h`:
+```c
+#undef STM32_GPT_USE_TIM15
+#define STM32_GPT_USE_TIM15 TRUE
 ```
 
-#### ChibiOS Configuration :id=arm-configuration
+The following `#define`s apply only to the `timer` driver:
 
-The following `#define`s apply only to ARM-based keyboards:
+|Define                |Default |Description     |
+|----------------------|--------|----------------|
+|`BACKLIGHT_GPT_DRIVER`|`GPTD15`|The timer to use|
 
-|Define                 |Default|Description                        |
-|-----------------------|-------|-----------------------------------|
-|`BACKLIGHT_PWM_DRIVER` |`PWMD4`|The PWM driver to use              |
-|`BACKLIGHT_PWM_CHANNEL`|`3`    |The PWM channel to use             |
-|`BACKLIGHT_PAL_MODE`   |`2`    |The pin alternative function to use|
+## Example Schematic
 
-See the ST datasheet for your particular MCU to determine these values. Unless you are designing your own keyboard, you generally should not need to change them.
+Since the MCU can only supply so much current to its GPIO pins, instead of powering the backlight directly from the MCU, the backlight pin is connected to a transistor or MOSFET that switches the power to the LEDs.
 
-#### Caveats :id=arm-caveats
+In this typical example, the backlight LEDs are all connected in parallel towards an N-channel MOSFET. Its gate pin is wired to one of the microcontroller's GPIO pins through a 470Ω resistor to avoid ringing.
+A pulldown resistor is also placed between the gate pin and ground to keep it at a defined state when it is not otherwise being driven by the MCU.
+The values of these resistors are not critical - see [this Electronics StackExchange question](https://electronics.stackexchange.com/q/68748) for more information.
 
-Currently only hardware PWM is supported, not timer assisted, and does not provide automatic configuration.
+![Backlight example circuit](https://i.imgur.com/BmAvoUC.png)
 
-### Software PWM Driver :id=software-pwm-driver
+## API :id=api
 
-In this mode, PWM is "emulated" while running other keyboard tasks. It offers maximum hardware compatibility without extra platform configuration. The tradeoff is the backlight might jitter when the keyboard is busy. To enable, add this to your `rules.mk`:
+### `void backlight_toggle(void)` :id=api-backlight-toggle
 
-```make
-BACKLIGHT_DRIVER = software
-```
+Toggle the backlight on or off.
 
-#### Multiple Backlight Pins :id=multiple-backlight-pins
+---
 
-Most keyboards have only one backlight pin which controls all backlight LEDs (especially if the backlight is connected to a hardware PWM pin).
-In software PWM, it is possible to define multiple backlight pins, which will be turned on and off at the same time during the PWM duty cycle.
+### `void backlight_enable(void)` :id=api-backlight-enable
 
-This feature allows to set, for instance, the Caps Lock LED's (or any other controllable LED) brightness at the same level as the other LEDs of the backlight. This is useful if you have mapped Control in place of Caps Lock and you need the Caps Lock LED to be part of the backlight instead of being activated when Caps Lock is on, as it is usually wired to a separate pin from the backlight.
+Turn the backlight on.
 
-To activate multiple backlight pins, add something like this to your `config.h`, instead of `BACKLIGHT_PIN`:
+---
 
-```c
-#define BACKLIGHT_PINS { F5, B2 }
-```
+### `void backlight_disable(void)` :id=api-backlight-disable
 
-### Custom Driver :id=custom-driver
+Turn the backlight off.
 
-If none of the above drivers apply to your board (for example, you are using a separate IC to control the backlight), you can implement a custom backlight driver using this simple API provided by QMK. To enable, add this to your `rules.mk`:
+---
 
-```make
-BACKLIGHT_DRIVER = custom
-```
+### `void backlight_step(void)` :id=api-backlight-step
 
-Then implement any of these hooks:
+Cycle through backlight levels.
 
-```c
-void backlight_init_ports(void) {
-    // Optional - runs on startup
-    //   Usually you want to configure pins here
-}
-void backlight_set(uint8_t level) {
-    // Optional - runs on level change
-    //   Usually you want to respond to the new value
-}
+---
 
-void backlight_task(void) {
-    // Optional - runs periodically
-    //   Note that this is called in the main keyboard loop,
-    //   so long running actions here can cause performance issues
-}
-```
+### `void backlight_increase(void)` :id=api-backlight-increase
 
-## Example Schematic
+Increase the backlight level.
 
-In this typical example, the backlight LEDs are all connected in parallel towards an N-channel MOSFET. Its gate pin is wired to one of the microcontroller's GPIO pins through a 470Ω resistor to avoid ringing.
-A pulldown resistor is also placed between the gate pin and ground to keep it at a defined state when it is not otherwise being driven by the MCU.
-The values of these resistors are not critical - see [this Electronics StackExchange question](https://electronics.stackexchange.com/q/68748) for more information.
+---
 
-![Backlight example circuit](https://i.imgur.com/BmAvoUC.png)
+### `void backlight_decrease(void)` :id=api-backlight-decrease
+
+Decrease the backlight level.
+
+---
+
+### `void backlight_level(uint8_t level)` :id=api-backlight-level
+
+Set the backlight level.
+
+#### Arguments :id=api-backlight-level-arguments
+
+ - `uint8_t level`  
+   The level to set, from 0 to `BACKLIGHT_LEVELS`.
+
+---
+
+### `uint8_t get_backlight_level(void)` :id=api-get-backlight-level
+
+Get the current backlight level.
+
+#### Return Value :id=api-get-backlight-level-return
+
+The current backlight level, from 0 to `BACKLIGHT_LEVELS`.
+
+---
+
+### `bool is_backlight_enabled(void)` :id=api-is-backlight-enabled
+
+Get the current backlight state.
+
+#### Return Value :id=api-is-backlight-enabled-return
+
+`true` if the backlight is enabled.
+
+---
+
+### `void backlight_toggle_breathing(void)` :id=api-backlight-toggle-breathing
+
+Toggle backlight breathing on or off.
+
+---
+
+### `void backlight_enable_breathing(void)` :id=api-backlight-enable-breathing
+
+Turn backlight breathing on.
+
+---
+
+### `void backlight_disable_breathing(void)` :id=api-backlight-disable-breathing
+
+Turn backlight breathing off.
+
+---
+
+### `bool is_backlight_breathing(void)` :id=api-is-backlight-breathing
+
+Get the current backlight breathing state.
+
+#### Return Value :id=api-is-backlight-breathing-return
+
+`true` if backlight breathing is enabled.
diff --git a/docs/feature_haptic_feedback.md b/docs/feature_haptic_feedback.md
index b456bad736..02a231138d 100644
--- a/docs/feature_haptic_feedback.md
+++ b/docs/feature_haptic_feedback.md
@@ -4,11 +4,12 @@
 
 The following options are currently available for haptic feedback in `rules.mk`:
 
-```
+```make
 HAPTIC_ENABLE = yes
 
-HAPTIC_DRIVER += DRV2605L
-HAPTIC_DRIVER += SOLENOID
+HAPTIC_DRIVER = drv2605l
+# or
+HAPTIC_DRIVER = solenoid
 ```
 
 The following `config.h` settings are available for all types of haptic feedback:
@@ -92,7 +93,7 @@ This driver supports 2 different feedback motors. Set the following in your `con
 
 Eccentric Rotating Mass vibration motors (ERM) is motor with a off-set weight attached so when drive signal is attached, the off-set weight spins and causes a sinusoidal wave that translate into vibrations.
 
-```
+```c
 #define FB_ERM_LRA 0
 #define FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
 #define FB_LOOPGAIN 1 /* For  Low:0, Medium:1, High:2, Very High:3 */
@@ -105,7 +106,7 @@ Eccentric Rotating Mass vibration motors (ERM) is motor with a off-set weight at
 
 Linear resonant actuators (LRA, also know as a linear vibrator) works different from a ERM. A LRA has a weight and magnet suspended by springs and a voice coil. When the drive signal is applied, the weight would be vibrate on a single axis (side to side or up and down). Since the weight is attached to a spring, there is a resonance effect at a specific frequency. This frequency is where the LRA will operate the most efficiently. Refer to the motor's datasheet for the recommanded range for this frequency.
 
-``` 
+```c
 #define FB_ERM_LRA 1
 #define FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
 #define FB_LOOPGAIN 1 /* For  Low:0, Medium:1, High:2, Very High:3 */
@@ -170,13 +171,13 @@ List of waveform sequences from the datasheet:
 | 42  | lg_dblclick_med_80  | 84  | transition_rampup_med_smooth1     |     |                                      |
 ### Optional DRV2605L defines
 
-```
-#define DRV_GREETING *sequence name or number*
+```c
+#define DRV2605L_GREETING *sequence name or number*
 ```
 If haptic feedback is enabled, the keyboard will vibrate to a specific sequence during startup. That can be selected using the following define:
 
-```
-#define DRV_MODE_DEFAULT *sequence name or number*
+```c
+#define DRV2605L_DEFAULT_MODE *sequence name or number*
 ```
 This will set what sequence `HF_RST` will set as the active mode. If not defined, mode will be set to 1 when `HF_RST` is pressed.
 
diff --git a/docs/feature_hd44780.md b/docs/feature_hd44780.md
index 4ade640baa..dcbd656bbe 100644
--- a/docs/feature_hd44780.md
+++ b/docs/feature_hd44780.md
@@ -1,6 +1,6 @@
-# HD44780 LCD Driver
+# HD44780 LCD Driver :id=hd44780-lcd-driver
 
-## Supported Hardware
+## Supported Hardware :id=supported-hardware
 
 LCD modules using [HD44780U](https://www.sparkfun.com/datasheets/LCD/HD44780.pdf) IC or equivalent, communicating in 4-bit mode.
 
@@ -11,7 +11,7 @@ LCD modules using [HD44780U](https://www.sparkfun.com/datasheets/LCD/HD44780.pdf
 
 To run these modules at 3.3V, an additional MAX660 voltage converter IC must be soldered on, along with two 10µF capacitors. See [this page](https://www.codrey.com/electronic-circuits/hack-your-16x2-lcd/) for more details.
 
-## Usage
+## Usage :id=usage
 
 Add the following to your `rules.mk`:
 
@@ -19,7 +19,7 @@ Add the following to your `rules.mk`: