diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/ChangeLog/20230226/PR15741.md | 43 | ||||
| -rw-r--r-- | docs/_summary.md | 2 | ||||
| -rw-r--r-- | docs/config_options.md | 20 | ||||
| -rw-r--r-- | docs/feature_auto_shift.md | 11 | ||||
| -rw-r--r-- | docs/feature_leader_key.md | 12 | ||||
| -rw-r--r-- | docs/feature_led_indicators.md | 2 | ||||
| -rw-r--r-- | docs/feature_os_detection.md | 77 | ||||
| -rw-r--r-- | docs/feature_pointing_device.md | 21 | ||||
| -rw-r--r-- | docs/feature_tap_dance.md | 64 | ||||
| -rw-r--r-- | docs/feature_unicode.md | 10 | ||||
| -rw-r--r-- | docs/hardware_keyboard_guidelines.md | 2 | ||||
| -rw-r--r-- | docs/ja/config_options.md | 2 | ||||
| -rw-r--r-- | docs/ja/feature_grave_esc.md | 4 | ||||
| -rw-r--r-- | docs/ja/feature_led_indicators.md | 2 | ||||
| -rw-r--r-- | docs/ja/hardware_keyboard_guidelines.md | 2 | ||||
| -rw-r--r-- | docs/ja/tap_hold.md | 19 | ||||
| -rw-r--r-- | docs/newbs_building_firmware.md | 2 | ||||
| -rw-r--r-- | docs/platformdev_rp2040.md | 6 | ||||
| -rw-r--r-- | docs/quantum_painter_lvgl.md | 55 | ||||
| -rw-r--r-- | docs/reference_info_json.md | 35 | ||||
| -rw-r--r-- | docs/tap_hold.md | 124 | ||||
| -rw-r--r-- | docs/zh-cn/feature_grave_esc.md | 4 |
22 files changed, 390 insertions, 129 deletions
diff --git a/docs/ChangeLog/20230226/PR15741.md b/docs/ChangeLog/20230226/PR15741.md new file mode 100644 index 0000000000..385816d65b --- /dev/null +++ b/docs/ChangeLog/20230226/PR15741.md @@ -0,0 +1,43 @@ +`IGNORE_MOD_TAP_INTERRUPT_PER_KEY` has been removed and `IGNORE_MOD_TAP_INTERRUPT` deprecated as a stepping stone towards making `IGNORE_MOD_TAP_INTERRUPT` the new default behavior for mod-taps in the future. + +In place of the now removed `IGNORE_MOD_TAP_INTERRUPT_PER_KEY`, one must use the pre-existing `HOLD_ON_OTHER_KEY_PRESS` option. + +In most cases, updating `get_ignore_mod_tap_interrupt` to `get_hold_on_other_key_press` is simply a matter of renaming the function and swapping every `true` by `false` and vice versa. The one subtlety you may need to look out for is that the `get_ignore_mod_tap_interrupt` was only ever called with mod-taps passed in as the `keycode` argument, while the `keycode` argument of `get_hold_on_other_key_press` can be any dual-role key. This includes not only mod-taps, but also layer-taps, one shot keys, `TT(layer)` and more. This has an impact on the effect of the `default` case in a typical per-key configuration making use of a `switch(keycode)` statement. + +To illustrate, let's take the example of a configuration where we'd want all mod-taps to activate the modifier if another key is pressed while held with the exception of `LCTL_T(KC_A)`, which should ignore keys pressed while it is held and activate the modifier only if it has been held for longer than the tapping term. In addition, we would like to keep the default "ignore-interrupt" behavior of layer taps. + +An old way to do this would be via the following code: + +```c +bool get_ignore_mod_tap_interrupt(uint16_t keycode, keyrecord_t *record) { + switch(keycode) { + case LCTL_T(KC_A): + return true; + default: + return false; + } +} +``` + +The correct way to update this code without accidentally changing how the layer-taps work would be the following: + +```c +bool get_hold_on_other_key_press(uint16_t keycode, keyrecord_t *record) { + switch(keycode) { + // Capture all mod-tap keycodes. + case QK_MOD_TAP ... QK_MOD_TAP_MAX: + if (keycode == LCTL_T(KC_A)) { + // Disable HOLD_ON_OTHER_KEY_PRESS for LCTL_T(KC_A) + // aka enable IGNORE_MOD_TAP_INTERRUPT for LCTL_T(KC_A). + return false; + } else { + // Enable HOLD_ON_OTHER_KEY_PRESS for every other mod-tap keycode. + return true; + } + default: + return false; + } +} +``` + +For more information, you are invited to read the sections on [IGNORE_MOD_TAP_INTERRUPT](tap_hold.md#ignore-mod-tap-interrupt) and [HOLD_ON_OTHER_KEY_PRESS](tap_hold.md#hold-on-other-key-press) in the page on [Tap-Hold configuration options](tap_hold.md). diff --git a/docs/_summary.md b/docs/_summary.md index 738c24ee42..d2d4bb9b32 100644 --- a/docs/_summary.md +++ b/docs/_summary.md @@ -85,6 +85,7 @@ * [Key Overrides](feature_key_overrides.md) * [Layers](feature_layers.md) * [One Shot Keys](one_shot_keys.md) + * [OS Detection](feature_os_detection.md) * [Raw HID](feature_rawhid.md) * [Secure](feature_secure.md) * [Send String](feature_send_string.md) @@ -99,6 +100,7 @@ * Hardware Features * Displays * [Quantum Painter](quantum_painter.md) + * [Quantum Painter LVGL Integration](quantum_painter_lvgl.md) * [HD44780 LCD Driver](feature_hd44780.md) * [ST7565 LCD Driver](feature_st7565.md) * [OLED Driver](feature_oled_driver.md) diff --git a/docs/config_options.md b/docs/config_options.md index 6b1f83214c..7a91160bcd 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -169,14 +169,18 @@ If you define these options you will enable the associated feature, which may in * `#define IGNORE_MOD_TAP_INTERRUPT` * makes it possible to do rolling combos (zx) with keys that convert to other keys on hold, by enforcing the `TAPPING_TERM` for both keys. * See [Ignore Mod Tap Interrupt](tap_hold.md#ignore-mod-tap-interrupt) for details -* `#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY` - * enables handling for per key `IGNORE_MOD_TAP_INTERRUPT` settings -* `#define TAPPING_FORCE_HOLD` - * makes it possible to use a dual role key as modifier shortly after having been tapped - * See [Tapping Force Hold](tap_hold.md#tapping-force-hold) - * Breaks any Tap Toggle functionality (`TT` or the One Shot Tap Toggle) -* `#define TAPPING_FORCE_HOLD_PER_KEY` - * enables handling for per key `TAPPING_FORCE_HOLD` settings +* `#define QUICK_TAP_TERM 100` + * tap-then-hold timing to use a dual role key to repeat keycode + * See [Quick Tap Term](tap_hold.md#quick-tap-term) + * Changes the timing of Tap Toggle functionality (`TT` or the One Shot Tap Toggle) + * Defaults to `TAPPING_TERM` if not defined +* `#define QUICK_TAP_TERM_PER_KEY` + * enables handling for per key `QUICK_TAP_TERM` settings +* `#define HOLD_ON_OTHER_KEY_PRESS` + * selects the hold action of a dual-role key as soon as the tap of the dual-role key is interrupted by the press of another key. + * See "[hold on other key press](tap_hold.md#hold-on-other-key-press)" for details +* `#define HOLD_ON_OTHER_KEY_PRESS_PER_KEY` + * enables handling for per key `HOLD_ON_OTHER_KEY_PRESS` settings * `#define LEADER_TIMEOUT 300` * how long before the leader key times out * If you're having issues finishing the sequence before it times out, you may need to increase the timeout setting. Or you may want to enable the `LEADER_PER_KEY_TIMING` option, which resets the timeout after each key is tapped. diff --git a/docs/feature_auto_shift.md b/docs/feature_auto_shift.md index d3437a9c60..1719807e26 100644 --- a/docs/feature_auto_shift.md +++ b/docs/feature_auto_shift.md @@ -281,16 +281,7 @@ Tap Hold Configurations work a little differently when using Retro Shift. Referencing `TAPPING_TERM` makes little sense, as holding longer would result in shifting one of the keys. -`IGNORE_MOD_TAP_INTERRUPT` changes *only* rolling from a mod tap (releasing it -first), sending both keys instead of the modifier on the second. Its effects on -nested presses are ignored. - -As nested taps were changed to act as though `PERMISSIVE_HOLD` is set unless only -`IGNORE_MOD_TAP_INTERRUPT` is (outside of Retro Shift), and Retro Shift ignores -`IGNORE_MOD_TAP_INTERRUPT`, `PERMISSIVE_HOLD` has no effect on Mod Taps. - -Nested taps will *always* act as though the `TAPPING_TERM` was exceeded for both -Mod and Layer Tap keys. +`RETRO_SHIFT` enables [`PERMISSIVE_HOLD`-like behaviour](tap_hold.md#permissive-hold) (even if not explicitly enabled) on all mod-taps for which `RETRO_SHIFT` applies. ## Using Auto Shift Setup diff --git a/docs/feature_leader_key.md b/docs/feature_leader_key.md index e285d10597..4e7a487be7 100644 --- a/docs/feature_leader_key.md +++ b/docs/feature_leader_key.md @@ -93,18 +93,18 @@ While, this may be fine for most, if you want to specify the whole keycode (eg, ## Customization -The Leader Key feature has some additional customization to how the Leader Key feature works. It has two functions that can be called at certain parts of the process. Namely `leader_start()` and `leader_end()`. +The Leader Key feature has some additional customization to how the Leader Key feature works. It has two functions that can be called at certain parts of the process. Namely `leader_start_user()` and `leader_end_user()`. -The `leader_start()` function is called when you tap the `QK_LEAD` key, and the `leader_end()` function is called when either the leader sequence is completed, or the leader timeout is hit. +The `leader_start_user()` function is called when you tap the `QK_LEAD` key, and the `leader_end_user()` function is called when either the leader sequence is completed, or the leader timeout is hit. You can add these functions to your code (`keymap.c` usually) to add feedback to the Leader sequences (such as beeping or playing music). ```c -void leader_start(void) { +void leader_start_user(void) { // sequence started } -void leader_end(void) { +void leader_end_user(void) { // sequence ended (no success/failure detection) } ``` @@ -139,13 +139,13 @@ void matrix_scan_user(void) { } } -void leader_start(void) { +void leader_start_user(void) { #ifdef AUDIO_ENABLE PLAY_SONG(leader_start); #endif } -void leader_end(void) { +void leader_end_user(void) { if (did_leader_succeed) { #ifdef AUDIO_ENABLE PLAY_SONG(leader_succeed); diff --git a/docs/feature_led_indicators.md b/docs/feature_led_indicators.md index d89562a377..1f71cdb1c8 100644 --- a/docs/feature_led_indicators.md +++ b/docs/feature_led_indicators.md @@ -19,7 +19,7 @@ There are three ways to get the lock LED state: Two deprecated functions that provide the LED state as `uint8_t`: -* `uint8_t led_set_kb(uint8_t usb_led)` and `_user(uint8_t usb_led)` +* `uint8_t led_set_user(uint8_t usb_led)` * `uint8_t host_keyboard_leds()` ## Configuration Options diff --git a/docs/feature_os_detection.md b/docs/feature_os_detection.md new file mode 100644 index 0000000000..f32e419807 --- /dev/null +++ b/docs/feature_os_detection.md @@ -0,0 +1,77 @@ +# OS Detection + +This feature makes a best guess at the host OS based on OS specific behavior during USB setup. It may not always get the correct OS, and shouldn't be relied on as for critical functionality. + +Using it you can have OS specific key mappings or combos which work differently on different devices. + +It is available for keyboards which use ChibiOS, LUFA and V-USB. + +## Usage + +In your `rules.mk` add: + +```make +OS_DETECTION_ENABLE = yes +``` + +Include `"os_detection.h"` in your `keymap.c`. +It declares `os_variant_t detected_host_os(void);` which you can call to get detected OS. + +It returns one of the following values: + +```c +enum { + OS_UNSURE, + OS_LINUX, + OS_WINDOWS, + OS_MACOS, + OS_IOS, +} os_variant_t; +``` + +?> Note that it takes some time after firmware is booted to detect the OS. +This time is quite short, probably hundreds of milliseconds, but this data may be not ready in keyboard and layout setup functions which run very early during firmware startup. + +## Debug + +If OS is guessed incorrectly, you may want to collect data about USB setup packets to refine the detection logic. + +To do so in your `rules.mk` add: + +```make +OS_DETECTION_DEBUG_ENABLE = yes +CONSOLE_ENABLE = yes +``` + +And also include `"os_detection.h"` in your `keymap.c`. + +Then you can define custom keycodes to store data about USB setup packets in EEPROM (persistent memory) and to print it later on host where you can run `qmk console`: + +```c +enum custom_keycodes { + STORE_SETUPS = SAFE_RANGE, + PRINT_SETUPS, +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case STORE_SETUPS: + if (record->event.pressed) { + store_setups_in_eeprom(); + } + return false; + case PRINT_SETUPS: + if (record->event.pressed) { + print_stored_setups(); + } + return false; + } +} +``` + +Then please open an issue on Github with this information and tell what OS was not detected correctly and if you have any intermediate devices between keyboard and your computer. + + +## Credits + +Original idea is coming from [FingerprintUSBHost](https://github.com/keyboardio/FingerprintUSBHost) project. diff --git a/docs/feature_pointing_device.md b/docs/feature_pointing_device.md index be984dd5a5..ecb7ee42cb 100644 --- a/docs/feature_pointing_device.md +++ b/docs/feature_pointing_device.md @@ -22,11 +22,11 @@ POINTING_DEVICE_DRIVER = adns5050 The ADNS 5050 sensor uses a serial type protocol for communication, and requires an additional light source. -| Setting | Description | Default | -| ------------------- | ------------------------------------------------------------------- | -------------------------- | -| `ADNS5050_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. | `POINTING_DEVICE_SCLK_PIN` | -| `ADNS5050_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. | `POINTING_DEVICE_SDIO_PIN` | -| `ADNS5050_CS_PIN` | (Required) The pin connected to the cable select pin of the sensor. | `POINTING_DEVICE_CS_PIN` | +| Setting | Description | Default | +| ------------------- | ------------------------------------------------------------------ | -------------------------- | +| `ADNS5050_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. | `POINTING_DEVICE_SCLK_PIN` | +| `ADNS5050_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. | `POINTING_DEVICE_SDIO_PIN` | +| `ADNS5050_CS_PIN` | (Required) The pin connected to the Chip Select pin of the sensor. | `POINTING_DEVICE_CS_PIN` | @@ -48,7 +48,7 @@ The ADNS 9800 is an SPI driven optical sensor, that uses laser output for surfac | `ADNS9800_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` | | `ADNS9800_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `3` | | `ADNS9800_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ | -| `ADNS9800_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | `POINTING_DEVICE_CS_PIN` | +| `ADNS9800_CS_PIN` | (Required) Sets the Chip Select pin connected to the sensor. | `POINTING_DEVICE_CS_PIN` | The CPI range is 800-8200, in increments of 200. Defaults to 1800 CPI. @@ -124,7 +124,7 @@ Default attenuation is set to 4X, although if you are using a thicker overlay (s | `CIRQUE_PINNACLE_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` | | `CIRQUE_PINNACLE_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `1` | | `CIRQUE_PINNACLE_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ | -| `CIRQUE_PINNACLE_SPI_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | `POINTING_DEVICE_CS_PIN` | +| `CIRQUE_PINNACLE_SPI_CS_PIN` | (Required) Sets the Chip Select pin connected to the sensor. | `POINTING_DEVICE_CS_PIN` | Default Scaling is 1024. Actual CPI depends on trackpad diameter. @@ -218,11 +218,14 @@ POINTING_DEVICE_DRIVER = pmw3389 The CPI range is 50-16000, in increments of 50. Defaults to 2000 CPI. Both PMW 3360 and PMW 3389 are SPI driven optical sensors, that use a built in IR LED for surface tracking. +If you have different CS wiring on each half you can use `PMW33XX_CS_PIN_RIGHT` or `PMW33XX_CS_PINS_RIGHT` in combination with `PMW33XX_CS_PIN` or `PMW33XX_CS_PINS` to configure both sides independently. If `_RIGHT` values aren't provided, they default to be the same as the left ones. | Setting | Description | Default | | ---------------------------- | ------------------------------------------------------------------------------------------- | ------------------------ | -| `PMW33XX_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | `POINTING_DEVICE_CS_PIN` | -| `PMW33XX_CS_PINS` | (Alternative) Sets the Cable Select pins connected to multiple sensors. | _not defined_ | +| `PMW33XX_CS_PIN` | (Required) Sets the Chip Select pin connected to the sensor. | `POINTING_DEVICE_CS_PIN` | +| `PMW33XX_CS_PINS` | (Alternative) Sets the Chip Select pins connected to multiple sensors. | `{PMW33XX_CS_PIN}` | +| `PMW33XX_CS_PIN_RIGHT` | (Optional) Sets the Chip Select pin connected to the sensor on the right half. | `PMW33XX_CS_PIN` | +| `PMW33XX_CS_PINS_RIGHT` | (Optional) Sets the Chip Select pins connected to multiple sensors on the right half. | `{PMW33XX_CS_PIN_RIGHT}` | | `PMW33XX_CPI` | (Optional) Sets counts per inch sensitivity of the sensor. | _varies_ | | `PMW33XX_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` | | `PMW33XX_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ | diff --git a/docs/feature_tap_dance.md b/docs/feature_tap_dance.md index 1062e32243..b7d8a5528f 100644 --- a/docs/feature_tap_dance.md +++ b/docs/feature_tap_dance.md @@ -64,7 +64,7 @@ enum { }; // Tap Dance definitions -qk_tap_dance_action_t tap_dance_actions[] = { +tap_dance_action_t tap_dance_actions[] = { // Tap once for Escape, twice for Caps Lock [TD_ESC_CAPS] = ACTION_TAP_DANCE_DOUBLE(KC_ESC, KC_CAPS), }; @@ -96,14 +96,14 @@ enum { #### Example 1: Send "Safety Dance!" After 100 Taps :id=example-1 ```c -void dance_egg(qk_tap_dance_state_t *state, void *user_data) { +void dance_egg(tap_dance_state_t *state, void *user_data) { if (state->count >= 100) { SEND_STRING("Safety dance!"); reset_tap_dance(state); } } -qk_tap_dance_action_t tap_dance_actions[] = { +tap_dance_action_t tap_dance_actions[] = { [CT_EGG] = ACTION_TAP_DANCE_FN(dance_egg), }; ``` @@ -113,7 +113,7 @@ qk_tap_dance_action_t tap_dance_actions[] = { ```c // On each tap, light up one LED, from right to left // On the fourth tap, turn them off from right to left -void dance_flsh_each(qk_tap_dance_state_t *state, void *user_data) { +void dance_flsh_each(tap_dance_state_t *state, void *user_data) { switch (state->count) { case 1: ergodox_right_led_3_on(); @@ -134,14 +134,14 @@ void dance_flsh_each(qk_tap_dance_state_t *state, void *user_data) { } // On the fourth tap, set the keyboard on flash state -void dance_flsh_finished(qk_tap_dance_state_t *state, void *user_data) { +void dance_flsh_finished(tap_dance_state_t *state, void *user_data) { if (state->count >= 4) { reset_keyboard(); } } // If the flash state didn't happen, then turn off LEDs, left to right -void dance_flsh_reset(qk_tap_dance_state_t *state, void *user_data) { +void dance_flsh_reset(tap_dance_state_t *state, void *user_data) { ergodox_right_led_1_off(); wait_ms(50); ergodox_right_led_2_off(); @@ -150,7 +150,7 @@ void dance_flsh_reset(qk_tap_dance_state_t *state, void *user_data) { } // All tap dances now put together. Example 2 is "CT_FLSH" -qk_tap_dance_action_t tap_dance_actions[] = { +tap_dance_action_t tap_dance_actions[] = { [TD_ESC_CAPS] = ACTION_TAP_DANCE_DOUBLE(KC_ESC, KC_CAPS), [CT_EGG] = ACTION_TAP_DANCE_FN(dance_egg), [CT_FLSH] = ACTION_TAP_DANCE_FN_ADVANCED(dance_flsh_each, dance_flsh_finished, dance_flsh_reset) @@ -169,7 +169,7 @@ typedef struct { } tap_dance_tap_hold_t; bool process_record_user(uint16_t keycode, keyrecord_t *record) { - qk_tap_dance_action_t *action; + tap_dance_action_t *action; switch (keycode) { case TD(CT_CLN): // list all tap dance keycodes with tap-hold configurations @@ -182,7 +182,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } -void tap_dance_tap_hold_finished(qk_tap_dance_state_t *state, void *user_data) { +void tap_dance_tap_hold_finished(tap_dance_state_t *state, void *user_data) { tap_dance_tap_hold_t *tap_hold = (tap_dance_tap_hold_t *)user_data; if (state->pressed) { @@ -200,7 +200,7 @@ void tap_dance_tap_hold_finished(qk_tap_dance_state_t *state, void *user_data) { } } -void tap_dance_tap_hold_reset(qk_tap_dance_state_t *state, void *user_data) { +void tap_dance_tap_hold_reset(tap_dance_state_t *state, void *user_data) { tap_dance_tap_hold_t *tap_hold = (tap_dance_tap_hold_t *)user_data; if (tap_hold->held) { @@ -212,7 +212,7 @@ void tap_dance_tap_hold_reset(qk_tap_dance_state_t *state, void *user_data) { #define ACTION_TAP_DANCE_TAP_HOLD(tap, hold) \ { .fn = {NULL, tap_dance_tap_hold_finished, tap_dance_tap_hold_reset}, .user_data = (void *)&((tap_dance_tap_hold_t){tap, hold, 0}), } -qk_tap_dance_action_t tap_dance_actions[] = { +tap_dance_action_t tap_dance_actions[] = { [CT_CLN] = ACTION_TAP_DANCE_TAP_HOLD(KC_COLN, KC_SCLN), }; ``` @@ -256,11 +256,11 @@ enum { SOME_OTHER_DANCE }; -td_state_t cur_dance(qk_tap_dance_state_t *state); +td_state_t cur_dance(tap_dance_state_t *state); // For the x tap dance. Put it here so it can be used in any keymap -void x_finished(qk_tap_dance_state_t *state, void *user_data); -void x_reset(qk_tap_dance_state_t *state, void *user_data); +void x_finished(tap_dance_state_t *state, void *user_data); +void x_reset(tap_dance_state_t *state, void *user_data); ``` Now, at the bottom of your `keymap.c` file, you'll need to add the following: @@ -293,7 +293,7 @@ Now, at the bottom of your `keymap.c` file, you'll need to add the following: * For the third point, there does exist the 'TD_DOUBLE_SINGLE_TAP', however this is not fully tested * */ -td_state_t cur_dance(qk_tap_dance_state_t *state) { +td_state_t cur_dance(tap_dance_state_t *state) { if (state->count == 1) { if (state->interrupted || !state->pressed) return TD_SINGLE_TAP; // Key has not been interrupted, but the key is still held. Means you want to send a 'HOLD'. @@ -322,7 +322,7 @@ static td_tap_t xtap_state = { .state = TD_NONE }; -void x_finished(qk_tap_dance_state_t *state, void *user_data) { +void x_finished(tap_dance_state_t *state, void *user_data) { xtap_state.state = cur_dance(state); switch (xtap_state.state) { case TD_SINGLE_TAP: register_code(KC_X); break; @@ -337,7 +337,7 @@ void x_finished(qk_tap_dance_state_t *state, void *user_data) { } } -void x_reset(qk_tap_dance_state_t *state, void *user_data) { +void x_reset(tap_dance_state_t *state, void *user_data) { switch (xtap_state.state) { case TD_SINGLE_TAP: unregister_code(KC_X); break; case TD_SINGLE_HOLD: unregister_code(KC_LCTL); break; @@ -349,7 +349,7 @@ void x_reset(qk_tap_dance_state_t *state, void *user_data) { xtap_state.state = TD_NONE; } -qk_tap_dance_action_t tap_dance_actions[] = { +tap_dance_action_t tap_dance_actions[] = { [X_CTL] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, x_finished, x_reset) }; ``` @@ -385,18 +385,18 @@ static td_state_t td_state; // Declare your tapdance functions: // Function to determine the current tapdance state -td_state_t cur_dance(qk_tap_dance_state_t *state); +td_state_t cur_dance(tap_dance_state_t *state); // `finished` and `reset` functions for each tapdance keycode -void altlp_finished(qk_tap_dance_state_t *state, void *user_data); -void altlp_reset(qk_tap_dance_state_t *state, void *user_data); +void altlp_finished(tap_dance_state_t *state, void *user_data); +void altlp_reset(tap_dance_state_t *state, void *user_data); ``` Below your `LAYOUT`, define each of the tapdance functions: ```c // Determine the tapdance state to return -td_state_t cur_dance(qk_tap_dance_state_t *state) { +td_state_t cur_dance(tap_dance_state_t *state) { if (state->count == 1) { if (state->interrupted || !state->pressed) return TD_SINGLE_TAP; else return TD_SINGLE_HOLD; @@ -408,7 +408,7 @@ td_state_t cur_dance(qk_tap_dance_state_t *state) { // Handle the possible states for each tapdance keycode you define: -void altlp_finished(qk_tap_dance_state_t *state, void *user_data) { +void altlp_finished(tap_dance_state_t *state, void *user_data) { td_state = cur_dance(state); switch (td_state) { case TD_SINGLE_TAP: @@ -426,7 +426,7 @@ void altlp_finished(qk_tap_dance_state_t *state, void *user_data) { } } -void altlp_reset(qk_tap_dance_state_t *state, void *user_data) { +void altlp_reset(tap_dance_state_t *state, void *user_data) { switch (td_state) { case TD_SINGLE_TAP: unregister_code16(KC_LPRN); @@ -443,7 +443,7 @@ void altlp_reset(qk_tap_dance_state_t *state, void *user_data) { } // Define `ACTION_TAP_DANCE_FN_ADVANCED()` for each tapdance keycode, passing in `finished` and `reset` functions -qk_tap_dance_action_t tap_dance_actions[] = { +tap_dance_action_t tap_dance_actions[] = { [ALT_LP] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, altlp_finished, altlp_reset) }; ``` @@ -478,18 +478,18 @@ enum { // Declare the functions to be used with your tap dance key(s) // Function associated with all tap dances -td_state_t cur_dance(qk_tap_dance_state_t *state); +td_state_t cur_dance(tap_dance_state_t *state); // Functions associated with individual tap dances -void ql_finished(qk_tap_dance_state_t *state, void *user_data); -void ql_reset(qk_tap_dance_state_t *state, void *user_data); +void ql_finished(tap_dance_state_t *state, void *user_data); +void ql_reset(tap_dance_state_t *state, void *user_data); ``` Towards the bottom of your `keymap.c`, include the following code: ```c // Determine the current tap dance state -td_state_t cur_dance(qk_tap_dance_state_t *state) { +td_state_t cur_dance(tap_dance_state_t *state) { if (state->count == 1) { if (!state->pressed) return TD_SINGLE_TAP; else return TD_SINGLE_HOLD; @@ -504,7 +504,7 @@ static td_tap_t ql_tap_state = { }; // Functions that control what our tap dance key does -void ql_finished(qk_tap_dance_state_t *state, void *user_data) { +void ql_finished(tap_dance_state_t *state, void *user_data) { ql_tap_state.state = cur_dance(state); switch (ql_tap_state.state) { case TD_SINGLE_TAP: @@ -528,7 +528,7 @@ void ql_finished(qk_tap_dance_state_t *state, void *user_data) { } } -void ql_reset(qk_tap_dance_state_t *state, void *user_data) { +void ql_reset(tap_dance_state_t *state, void *user_data) { // If the key was held down and now is released then switch off the layer if (ql_tap_state.state == TD_SINGLE_HOLD) { layer_off(_MY_LAYER); @@ -537,7 +537,7 @@ void ql_reset(qk_tap_dance_state_t *state, void *user_data) { } // Associate our tap dance key with its functionality -qk_tap_dance_action_t tap_dance_actions[] = { +tap_dance_action_t tap_dance_actions[] = { [QUOT_LAYR] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, ql_finished, ql_reset) }; diff --git a/docs/feature_unicode.md b/docs/feature_unicode.md index a93e9ad2ba..1ea411191e 100644 --- a/docs/feature_unicode.md +++ b/docs/feature_unicode.md @@ -83,7 +83,7 @@ UCIS_ENABLE = yes Then define a table like this in your keymap file: ```c -const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE( +const ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE( UCIS_SYM("poop", 0x1F4A9), // 💩 UCIS_SYM("rofl", 0x1F923), // 🤣 UCIS_SYM("cuba", 0x1F1E8, 0x1F1FA), // 🇨🇺 @@ -93,15 +93,15 @@ const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE( By default, each table entry may be up to 3 code points long. This number can be changed by adding `#define UCIS_MAX_CODE_POINTS n` to your `config.h` file. -To use UCIS input, call `qk_ucis_start()`. Then, type the mnemonic for the character (such as "rofl") and hit Space, Enter or Esc. QMK should erase the "rofl" text and insert the laughing emoji. +To use UCIS input, call `ucis_start()`. Then, type the mnemonic for the character (such as "rofl") and hit Space, Enter or Esc. QMK should erase the "rofl" text and insert the laughing emoji. #### Customization There are several functions that you can define in your keymap to customize the functionality of this feature. -* `void qk_ucis_start_user(void)` – This runs when you call the "start" function, and can be used to provide feedback. By default, it types out a keyboard emoji. -* `void qk_ucis_success(uint8_t symbol_index)` – This runs when the input has matched something and has completed. By default, it doesn't do anything. -* `void qk_ucis_symbol_fallback (void)` – This runs when the input doesn't match anything. By default, it falls back to trying that input as a Unicode code. +* `void ucis_start_user(void)` – This runs when you call the "start" function, and can be used to provide feedback. By default, it types out a keyboard emoji. +* `void ucis_success(uint8_t symbol_index)` – This runs when the input has matched something and has completed. By default, it doesn't do anything. +* `void ucis_symbol_fallback (void)` – This runs when the input doesn't match anything. By default, it falls back to trying that input as a Unicode code. You can find the default implementations of these functions in [`process_ucis.c`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_ucis.c). diff --git a/docs/hardware_keyboard_guidelines.md b/docs/hardware_keyboard_guidelines.md index 6df86fb0fb..247ec9982f 100644 --- a/docs/hardware_keyboard_guidelines.md +++ b/docs/hardware_keyboard_guidelines.md @@ -188,7 +188,7 @@ The following functions are typically defined in this file: * `void matrix_init_kb(void)` * `void matrix_scan_kb(void)` * `bool process_record_kb(uint16_t keycode, keyrecord_t *record)` -* `void led_set_kb(uint8_t usb_led)` +* `bool led_update_kb(led_t led_state)` ### `<keyboard_name.h>` diff --git a/docs/ja/config_options.md b/docs/ja/config_options.md index c95753bd5d..6135721a42 100644 --- a/docs/ja/config_options.md +++ b/docs/ja/config_options.md @@ -162,8 +162,6 @@ QMK ã§ã®å…¨ã¦ã®åˆ©ç”¨å¯èƒ½ãªè¨å®šã«ã¯ãƒ‡ãƒ•ã‚©ãƒ«ãƒˆãŒã‚ã‚Šã¾ã™ã€‚ã * `#define IGNORE_MOD_TAP_INTERRUPT` * 両方ã®ã‚ー㫠`TAPPING_TERM` ã‚’é©ç”¨ã™ã‚‹ã“ã¨ã§ã€ãƒ›ãƒ¼ãƒ«ãƒ‰æ™‚ã«ä»–ã®ã‚ーã«å¤‰æ›ã™ã‚‹ã‚ーを使ã£ã¦ãƒãƒ¼ãƒªãƒ³ã‚°ã‚³ãƒ³ãƒœ (zx) ã‚’ã™ã‚‹ã“ã¨ãŒã§ãるよã†ã«ã—ã¾ã™ * 詳細㯠[Ignore Mod Tap Interrupt](ja/tap_hold.md#ignore-mod-tap-interrupt) を見ã¦ãã ã•ã„ -* `#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY` - * ã‚ーã”ã¨ã® `IGNORE_MOD_TAP_INTERRUPT` è¨å®šã®å‡¦ç†ã‚’有効ã«ã—ã¾ã™ * `#define TAPPING_FORCE_HOLD` * タップã•ã‚ŒãŸç›´å¾Œã«ã€ãƒ‡ãƒ¥ã‚¢ãƒ«ãƒãƒ¼ãƒ«ã‚ーを修飾åã¨ã—ã¦ä½¿ç”¨ã§ãるよã†ã«ã—ã¾ã™ * [Tapping Force Hold](ja/tap_hold.md#tapping-force-hold)を見ã¦ãã ã•ã„ diff --git a/docs/ja/feature_grave_esc.md b/docs/ja/feature_grave_esc.md index 8c6680d74d..746e9e5d14 100644 --- a/docs/ja/feature_grave_esc.md +++ b/docs/ja/feature_grave_esc.md @@ -9,7 +9,7 @@ ## 使用法 -ã‚ーマップ内㮠`KC_GRAVE` ã‚ー (通常ã¯`1` ã‚ーã®å·¦)ã‚’ `KC_GESC` ã«ç½®ãæ›ãˆã¾ã™ã€‚ã»ã¨ã‚“ã©ã®å ´åˆã€ã“ã®ã‚ーã¯æŠ¼ã•ã‚ŒãŸæ™‚ã« `KC_ESC` を出力ã—ã¾ã™ã€‚ãŸã ã—ã€Shift ã‚ã‚‹ã„㯠GUI を押ã—ãŸã¾ã¾ã«ã™ã‚‹ã¨ã€ä»£ã‚ã‚Šã« `KC_GRV` を出力ã—ã¾ã™ã€‚ +ã‚ーマップ内㮠`KC_GRAVE` ã‚ー (通常ã¯`1` ã‚ーã®å·¦)ã‚’ `QK_GESC` ã«ç½®ãæ›ãˆã¾ã™ã€‚ã»ã¨ã‚“ã©ã®å ´åˆã€ã“ã®ã‚ーã¯æŠ¼ã•ã‚ŒãŸæ™‚ã« `KC_ESC` を出力ã—ã¾ã™ã€‚ãŸã ã—ã€Shift ã‚ã‚‹ã„㯠GUI を押ã—ãŸã¾ã¾ã«ã™ã‚‹ã¨ã€ä»£ã‚ã‚Šã« `KC_GRV` を出力ã—ã¾ã™ã€‚ ## OS ã«è¦‹ãˆã‚‹ã‚‚ã® @@ -19,7 +19,7 @@ | ã‚ー | エイリアス | 説明 | |---------|-----------|------------------------------------------------------------------| -| `KC_GESC` | `GRAVE_ESC` | 押ã•ã‚ŒãŸå ´åˆã« Escape。Shift ã‚ã‚‹ã„㯠GUI ãŒæŠ¼ã•ã‚ŒãŸã¾ã¾ã®å ´åˆã¯ <code>`</code> | +| `QK_GESC` | `GRAVE_ESC` | 押ã•ã‚ŒãŸå ´åˆã« Escape。Shift ã‚ã‚‹ã„㯠GUI ãŒæŠ¼ã•ã‚ŒãŸã¾ã¾ã®å ´åˆã¯ <code>`</code> | ### 注æ„äº‹é … diff --git a/docs/ja/feature_led_indicators.md b/docs/ja/feature_led_indicators.md index 764b478c31..94ee063234 100644 --- a/docs/ja/feature_led_indicators.md +++ b/docs/ja/feature_led_indicators.md @@ -22,7 +22,7 @@ QMK 㯠HID 仕様ã§å®šç¾©ã•ã‚ŒãŸ5ã¤ã® LED ã®èªã¿å–りメソッドをæ LED ã®çŠ¶æ…‹ã‚’ `uint8_t` ã¨ã—ã¦æä¾›ã™ã‚‹2ã¤ã®éžæŽ¨å¥¨ã®é–¢æ•°ãŒã‚ã‚Šã¾ã™: -* `uint8_t led_set_kb(uint8_t usb_led)` 㨠`_user(uint8_t usb_led)` +* `uint8_t led_set_user(uint8_t usb_led)` * `uint8_t host_keyboard_leds()` ## è¨å®šã‚ªãƒ—ション :id=configuration-options diff --git a/docs/ja/hardware_keyboard_guidelines.md b/docs/ja/hardware_keyboard_guidelines.md index c0e7c18be0..ef5f6df2b9 100644 --- a/docs/ja/hardware_keyboard_guidelines.md +++ b/docs/ja/hardware_keyboard_guidelines.md @@ -165,7 +165,7 @@ Clueboard ã¯ã€ã‚µãƒ–フォルダをã¾ã¨ã‚ã‚‹ãŸã‚ã¨ã‚ーボードã®ãƒªã * `void matrix_init_kb(void)` * `void matrix_scan_kb(void)` * `bool process_record_kb(uint16_t keycode, keyrecord_t *record)` -* `void led_set_kb(uint8_t usb_led)` +* `bool led_update_kb(led_t led_state)` |