diff options
Diffstat (limited to 'docs/qmk_overview.md')
| -rw-r--r-- | docs/qmk_overview.md | 75 |
1 files changed, 0 insertions, 75 deletions
diff --git a/docs/qmk_overview.md b/docs/qmk_overview.md deleted file mode 100644 index 6fdb68c49f..0000000000 --- a/docs/qmk_overview.md +++ /dev/null @@ -1,75 +0,0 @@ -# QMK Overview - -This page attempts to explain the basic information you need to know to work with the QMK project. It assumes that you are familiar with navigating a UNIX shell, but does not assume you are familiar with C or with compiling using make. - -# Basic QMK structure - -QMK is a fork of @tmk's [tmk_keyboard](https://github.com/tmk/tmk_keyboard) project. The original TMK code, with modifications, can be found in the `tmk` folder. The QMK additions to the project may be found in the `quantum` folder. Keyboard projects may be found in the `handwired` and `keyboard` folders. - -## Keyboard project structure - -Within the `handwired` and `keyboard` folders is a directory for each keyboard project, for example `qmk_firmware/keyboards/clueboard`. Within you'll find the following structure: - -* `keymaps/`: Different keymaps that can be built -* `rules.mk`: The file that sets the default "make" options. Do not edit this file directly, instead use a keymap specific `Makefile`. -* `config.h`: The file that sets the default compile time options. Do not edit this file directly, instead use a keymap specific `config.h`. - -### Keymap structure - -In every keymap folder, the following files may be found. Only `keymap.c` is required, if the rest of the files are not found the default options will be chosen. - -* `config.h`: the options to configure your keymap -* `keymap.c`: all of your keymap code, required -* `Makefile`: the features of QMK that are enabled, required to run `make` in your keymap folder -* `readme.md`: a description of your keymap, how others might use it, and explanations of features -* Other files: Some people choose to include an image depicting the layout, and other files that help people to use or understand a particular keymap. - -# The `make` command - -The `make` command is how you compile the firmware into a .hex file, which can be loaded by a dfu programmer (like dfu-progammer via `make dfu`) or the [Teensy loader](https://www.pjrc.com/teensy/loader.html) (only used with Teensys). It it recommended that you always run make from within the `root` folder. - -**NOTE:** To abort a make command press `Ctrl-c` - -For more details on the QMK build process see [Make Instructions](make_instructions.md). - -### Simple instructions for building and uploading a keyboard - -**Most keyboards have more specific instructions in the keyboard specific readme.md file, so please check that first** - -1. Enter the `root` folder -2. Run `make <keyboard>-<subproject>-<keymap>-<programmer>` - -In the above commands, replace: - -* `<keyboard>` with the name of your keyboard -* `<keymap>` with the name of your keymap -* `<subproject>` with the name of the subproject (revision or sub-model of your keyboard). For example, for Ergodox it can be `ez` or `infinity`, and for Planck `rev3` or `rev4`. - * If the keyboard doesn't have a subproject, or if you are happy with the default (defined in `rules.mk` file of the `keyboard` folder), you can leave it out. But remember to also remove the dash (`-`) from the command. -* `<programmer>` The programmer to use. Most keyboards use `dfu`, but some use `teensy`. Infinity keyboards use `dfu-util`. Check the readme file in the keyboard folder to find out which programmer to use. - * If you don't add `-<programmer` to the command line, the firmware will be still be compiled into a hex file, but the upload will be skipped. - -**NOTE:** Some operating systems will refuse to program unless you run the make command as root for example `sudo make clueboard-default-dfu` - -## Make Examples - -* Build all Clueboard keymaps: `make clueboard` -* Build the default Planck keymap: `make planck-rev4-default` -* Build and flash your ergodox-ez: `make ergodox-ez-default-teensy` - -# The `config.h` file - -There are 2 `config.h` locations: - -* keyboard (`/keyboards/<keyboard>/`) -* keymap (`/keyboards/<keyboard>/keymaps/<keymap>/`) - -The keyboard `config.h` is included only if the keymap one doesn't exist. The format to use for your custom one [is here](https://github.com/qmk/qmk_firmware/blob/master/doc/keymap_config_h_example.h). If you want to override a setting from the parent `config.h` file, you need to do this: - -```c -#undef MY_SETTING -#define MY_SETTING 4 -``` - -For a value of `4` for this imaginary setting. So we `undef` it first, then `define` it. - -You can then override any settings, rather than having to copy and paste the whole thing.
\ No newline at end of file |