diff options
Diffstat (limited to 'docs/feature_split_keyboard.md')
| -rw-r--r-- | docs/feature_split_keyboard.md | 15 |
1 files changed, 13 insertions, 2 deletions
diff --git a/docs/feature_split_keyboard.md b/docs/feature_split_keyboard.md index e53b3525cb..0b475cc63d 100644 --- a/docs/feature_split_keyboard.md +++ b/docs/feature_split_keyboard.md @@ -153,11 +153,11 @@ Example: make crkbd:default:avrdude-split-left ``` -?> ARM controllers using `dfu-util` will require an EEPROM reset after setting handedness. This can be done using the `EEP_RST` keycode or [Bootmagic Lite](feature_bootmagic.md). Controllers using emulated EEPROM will always require handedness parameter when flashing the firmware. +?> ARM controllers using `dfu-util` will require an EEPROM reset after setting handedness. This can be done using the `EE_CLR` keycode or [Bootmagic Lite](feature_bootmagic.md). Controllers using emulated EEPROM will always require handedness parameter when flashing the firmware. ?> [QMK Toolbox]() can also be used to flash EEPROM handedness files. Place the controller in bootloader mode and select menu option Tools -> EEPROM -> Set Left/Right Hand -This setting is not changed when re-initializing the EEPROM using the `EEP_RST` key, or using the `eeconfig_init()` function. However, if you reset the EEPROM outside of the firmware's built in options (such as flashing a file that overwrites the `EEPROM`, like how the [QMK Toolbox]()'s "Reset EEPROM" button works), you'll need to re-flash the controller with the `EEPROM` files. +This setting is not changed when re-initializing the EEPROM using the `EE_CLR` key, or using the `eeconfig_init()` function. However, if you reset the EEPROM outside of the firmware's built in options (such as flashing a file that overwrites the `EEPROM`, like how the [QMK Toolbox]()'s "Reset EEPROM" button works), you'll need to re-flash the controller with the `EEPROM` files. You can find the `EEPROM` files in the QMK firmware repo, [here](https://github.com/qmk/qmk_firmware/tree/master/quantum/split_common). @@ -422,6 +422,17 @@ This sets the maximum timeout when detecting master/slave when using `SPLIT_USB_ ``` This sets the poll frequency when detecting master/slave when using `SPLIT_USB_DETECT` +```c +#define SPLIT_WATCHDOG_ENABLE +``` + +This will enable a software watchdog on any side delegated as slave and will reboot the keyboard if no successful communication occurs within `SPLIT_WATCHDOG_TIMEOUT`. This can be particularly helpful when `SPLIT_USB_DETECT` delegates both sides as slave in some circumstances. + +```c +#define SPLIT_WATCHDOG_TIMEOUT 3000 +``` +This set the maximum slave timeout when waiting for communication from master when using `SPLIT_WATCHDOG_ENABLE` + ## Hardware Considerations and Mods Master/slave delegation is made either by detecting voltage on VBUS connection or waiting for USB communication (`SPLIT_USB_DETECT`). Pro Micro boards can use VBUS detection out of the box and be used with or without `SPLIT_USB_DETECT`. |