diff options
Diffstat (limited to 'docs/feature_rgblight.md')
| -rw-r--r-- | docs/feature_rgblight.md | 64 |
1 files changed, 47 insertions, 17 deletions
diff --git a/docs/feature_rgblight.md b/docs/feature_rgblight.md index d48941a04f..52d5c5fe8a 100644 --- a/docs/feature_rgblight.md +++ b/docs/feature_rgblight.md @@ -63,8 +63,6 @@ Changing the **Value** sets the overall brightness. |`RGB_MODE_GRADIENT`|`RGB_M_G` |Static gradient animation mode | |`RGB_MODE_RGBTEST` |`RGB_M_T` |Red, Green, Blue test animation mode | -?> For backwards compatibility, `RGB_SMOD` is another alias of `RGB_MOD`. - ## Configuration Your RGB lighting can be configured by placing these `#define`s in your `config.h`: @@ -79,28 +77,41 @@ Your RGB lighting can be configured by placing these `#define`s in your `config. ## Animations -Not only can this lighting be whatever color you want, if `RGBLIGHT_ANIMATIONS` is defined, you also have a number of animation modes at your disposal: - -|Mode |Description | -|-----|---------------------| -|1 |Solid color | -|2-5 |Solid color breathing| -|6-8 |Cycling rainbow | -|9-14 |Swirling rainbow | -|15-20|Snake | -|21-23|Knight | -|24 |Christmas | -|25-34|Static gradient | -|35 |RGB Test | -|36 |Alternating | + +Not only can this lighting be whatever color you want, +if `RGBLIGHT_EFFECT_xxxx` or `RGBLIGHT_ANIMATIONS` is defined, you also have a number of animation modes at your disposal: + +|Mode number symbol |Additional number |Description | +|-----------------------------|-------------------|---------------------------------------| +|`RGBLIGHT_MODE_STATIC_LIGHT` | *None* |Solid color (this mode is always enabled) | +|`RGBLIGHT_MODE_BREATHING` | 0,1,2,3 |Solid color breathing | +|`RGBLIGHT_MODE_RAINBOW_MOOD` | 0,1,2 |Cycling rainbow | +|`RGBLIGHT_MODE_RAINBOW_SWIRL`| 0,1,2,3,4,5 |Swirling rainbow | +|`RGBLIGHT_MODE_SNAKE` | 0,1,2,3,4,5 |Snake | +|`RGBLIGHT_MODE_KNIGHT` | 0,1,2 |Knight | +|`RGBLIGHT_MODE_CHRISTMAS` | *None* |Christmas | +|`RGBLIGHT_MODE_STATIC_GRADIENT`| 0,1,..,9 |Static gradient | +|`RGBLIGHT_MODE_RGB_TEST` | *None* |RGB Test | +|`RGBLIGHT_MODE_ALTERNATING` | *None* |Alternating | Check out [this video](https://youtube.com/watch?v=VKrpPAHlisY) for a demonstration. +Note: For versions older than 0.6.117, The mode numbers were written directly. In `quantum/rgblight.h` there is a contrast table between the old mode number and the current symbol. + The following options can be used to tweak the various animations: |Define |Default |Description | |------------------------------------|-------------|-------------------------------------------------------------------------------------| -|`RGBLIGHT_ANIMATIONS` |*Not defined*|If defined, enables additional animation modes | +|`RGBLIGHT_EFFECT_BREATHING` |*Not defined*|If defined, enable breathing animation mode. | +|`RGBLIGHT_EFFECT_RAINBOW_MOOD` |*Not defined*|If defined, enable rainbow mood animation mode. | +|`RGBLIGHT_EFFECT_RAINBOW_SWIRL` |*Not defined*|If defined, enable rainbow swirl animation mode. | +|`RGBLIGHT_EFFECT_SNAKE` |*Not defined*|If defined, enable snake animation mode. | +|`RGBLIGHT_EFFECT_KNIGHT` |*Not defined*|If defined, enable knight animation mode. | +|`RGBLIGHT_EFFECT_CHRISTMAS` |*Not defined*|If defined, enable christmas animation mode. | +|`RGBLIGHT_EFFECT_STATIC_GRADIENT` |*Not defined*|If defined, enable static gradient mode. | +|`RGBLIGHT_EFFECT_RGB_TEST` |*Not defined*|If defined, enable RGB test animation mode. | +|`RGBLIGHT_EFFECT_ALTERNATING` |*Not defined*|If defined, enable alternating animation mode. | +|`RGBLIGHT_ANIMATIONS` |*Not defined*|If defined, enables all additional animation modes | |`RGBLIGHT_EFFECT_BREATHE_CENTER` |`1.85` |Used to calculate the curve for the breathing animation. Valid values are 1.0 to 2.7 | |`RGBLIGHT_EFFECT_BREATHE_MAX` |`255` |The maximum brightness for the breathing mode. Valid values are 1 to 255 | |`RGBLIGHT_EFFECT_SNAKE_LENGTH` |`4` |The number of LEDs to light up for the "Snake" animation | @@ -109,6 +120,7 @@ The following options can be used to tweak the various animations: |`RGBLIGHT_EFFECT_KNIGHT_LED_NUM` |`RGBLED_NUM` |The number of LEDs to have the "Knight" animation travel | |`RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL`|`1000` |How long to wait between light changes for the "Christmas" animation, in milliseconds| |`RGBLIGHT_EFFECT_CHRISTMAS_STEP` |`2` |The number of LEDs to group the red/green colors by for the "Christmas" animation | +|`RGBLIGHT_RAINBOW_SWIRL_RANGE` |`360` |Range adjustment for the rainbow swirl effect to get different swirls | You can also modify the speeds that the different modes animate at: @@ -149,6 +161,24 @@ If you need to change your RGB lighting in code, for example in a macro to chang |`rgblight_sethsv(h, s, v)` |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255 | |`rgblight_sethsv_noeeprom(h, s, v)`|Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255 (not written to EEPROM) | |`rgblight_sethsv_at(h, s, v, led)` |Set a single LED to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)| +|`rgblight_toggle()` |Toggle all LEDs between on and off | +|`rgblight_toggle_noeeprom()` |Toggle all LEDs between on and off (not written to EEPROM) | +|`rgblight_step()` |Change the mode to the next RGB animation in the list of enabled RGB animations | +|`rgblight_step_noeeprom()` |Change the mode to the next RGB animation in the list of enabled RGB animations (not written to EEPROM) | +|`rgblight_step_reverse()` |Change the mode to the previous RGB animation in the list of enabled RGB animations | +|`rgblight_step_reverse_noeeprom()` |Change the mode to the previous RGB animation in the list of enabled RGB animations (not written to EEPROM) | +|`rgblight_increase_hue()` |Increase the hue for all LEDs. This wraps around at maximum hue | +|`rgblight_increase_hue_noeeprom()` |Increase the hue for all LEDs. This wraps around at maximum hue (not written to EEPROM) | +|`rgblight_decrease_hue()` |Decrease the hue for all LEDs. This wraps around at minimum hue | +|`rgblight_decrease_hue_noeeprom()` |Decrease the hue for all LEDs. This wraps around at minimum hue (not written to EEPROM) | +|`rgblight_increase_sat()` |Increase the saturation for all LEDs. This wraps around at maximum saturation | +|`rgblight_increase_sat_noeeprom()` |Increase the saturation for all LEDs. This wraps around at maximum saturation (not written to EEPROM) | +|`rgblight_decrease_sat()` |Decrease the saturation for all LEDs. This wraps around at minimum saturation | +|`rgblight_decrease_sat_noeeprom()` |Decrease the saturation for all LEDs. This wraps around at minimum saturation (not written to EEPROM) | +|`rgblight_increase_val()` |Increase the value for all LEDs. This wraps around at maximum value | +|`rgblight_increase_val_noeeprom()` |Increase the value for all LEDs. This wraps around at maximum value (not written to EEPROM) | +|`rgblight_decrease_val()` |Decrease the value for all LEDs. This wraps around at minimum value | +|`rgblight_decrease_val_noeeprom()` |Decrease the value for all LEDs. This wraps around at minimum value (not written to EEPROM) | Additionally, [`rgblight_list.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight_list.h) defines several predefined shortcuts for various colors. Feel free to add to this list! |