summaryrefslogtreecommitdiffstats
path: root/docs/feature_rgb_matrix.md
diff options
context:
space:
mode:
Diffstat (limited to 'docs/feature_rgb_matrix.md')
-rw-r--r--docs/feature_rgb_matrix.md176
1 files changed, 117 insertions, 59 deletions
diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md
index 08d5c9c4c6..670d7e09bf 100644
--- a/docs/feature_rgb_matrix.md
+++ b/docs/feature_rgb_matrix.md
@@ -52,7 +52,7 @@ Here is an example using 2 drivers.
Define these arrays listing all the LEDs in your `<keyboard>.c`:
```c
-const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
* driver
* | R location
@@ -64,7 +64,7 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
}
```
-Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](https://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/issi/is31fl3731.h`. The `driver` is the index of the driver you defined in your `config.h` (`0`, `1`, `2`, or `3`).
+Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](https://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/led/issi/is31fl3731.h`. The `driver` is the index of the driver you defined in your `config.h` (`0`, `1`, `2`, or `3`).
---
### IS31FL3733 :id=is31fl3733
@@ -122,7 +122,7 @@ Currently only 4 drivers are supported, but it would be trivial to support all 8
Define these arrays listing all the LEDs in your `<keyboard>.c`:
```c
-const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
* driver
* | R location
@@ -134,7 +134,7 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
}
```
-Where `X_Y` is the location of the LED in the matrix defined by [the datasheet](https://www.issi.com/WW/pdf/31FL3733.pdf) and the header file `drivers/issi/is31fl3733.h`. The `driver` is the index of the driver you defined in your `config.h` (`0`, `1`, `2`, or `3` for now).
+Where `X_Y` is the location of the LED in the matrix defined by [the datasheet](https://www.issi.com/WW/pdf/31FL3733.pdf) and the header file `drivers/led/issi/is31fl3733.h`. The `driver` is the index of the driver you defined in your `config.h` (`0`, `1`, `2`, or `3` for now).
---
### IS31FL3737 :id=is31fl3737
@@ -145,9 +145,22 @@ There is basic support for addressable RGB matrix lighting with the I2C IS31FL37
RGB_MATRIX_ENABLE = yes
RGB_MATRIX_DRIVER = IS31FL3737
```
+You can use between 1 and 2 IS31FL3737 IC's. Do not specify `DRIVER_ADDR_2` define for second IC if not present on your keyboard.
Configure the hardware via your `config.h`:
+| Variable | Description | Default |
+|----------|-------------|---------|
+| `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
+| `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
+| `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
+| `DRIVER_LED_TOTAL` | (Required) How many RGB lights are present across all drivers | |
+| `DRIVER_ADDR_1` | (Required) Address for the first RGB driver | |
+| `DRIVER_ADDR_2` | (Optional) Address for the second RGB driver | |
+
+
+Here is an example using 2 drivers.
+
```c
// This is a 7-bit address, that gets left-shifted and bit 0
// set to 0 for write, 1 for read (as per I2C protocol)
@@ -159,19 +172,21 @@ Configure the hardware via your `config.h`:
// ADDR represents A3:A0 of the 7-bit address.
// The result is: 0b101(ADDR)
#define DRIVER_ADDR_1 0b1010000
-#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons.
+#define DRIVER_ADDR_2 0b1010001
#define DRIVER_COUNT 2
-#define DRIVER_1_LED_TOTAL 64
-#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
+#define DRIVER_1_LED_TOTAL 30
+#define DRIVER_2_LED_TOTAL 36
+#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
```
+!> Note the parentheses, this is so when `DRIVER_LED_TOTAL` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`.
-Currently only a single drivers is supported, but it would be trivial to support all 4 combinations. For now define `DRIVER_ADDR_2` as `DRIVER_ADDR_1`
+Currently only 2 drivers are supported, but it would be trivial to support all 4 combinations.
Define these arrays listing all the LEDs in your `<keyboard>.c`:
```c
-const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
* driver
* | R location
@@ -183,7 +198,7 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
}
```
-Where `X_Y` is the location of the LED in the matrix defined by [the datasheet](https://www.issi.com/WW/pdf/31FL3737.pdf) and the header file `drivers/issi/is31fl3737.h`. The `driver` is the index of the driver you defined in your `config.h` (Only `0` right now).
+Where `X_Y` is the location of the LED in the matrix defined by [the datasheet](https://www.issi.com/WW/pdf/31FL3737.pdf) and the header file `drivers/led/issi/is31fl3737.h`. The `driver` is the index of the driver you defined in your `config.h` (Only `0`, `1` for now).
---
@@ -228,6 +243,75 @@ Configure the hardware via your `config.h`:
```
---
+### AW20216 :id=aw20216
+There is basic support for addressable RGB matrix lighting with the SPI AW20216 RGB controller. To enable it, add this to your `rules.mk`:
+
+```makefile
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = AW20216
+```
+
+You can use up to 2 AW20216 IC's. Do not specify `DRIVER_<N>_xxx` defines for IC's that are not present on your keyboard. You can define the following items in `config.h`:
+
+| Variable | Description | Default |
+|----------|-------------|---------|
+| `DRIVER_1_CS` | (Required) MCU pin connected to first RGB driver chip select line | B13 |
+| `DRIVER_2_CS` | (Optional) MCU pin connected to second RGB driver chip select line | |
+| `DRIVER_1_EN` | (Required) MCU pin connected to first RGB driver hardware enable line | C13 |
+| `DRIVER_2_EN` | (Optional) MCU pin connected to second RGB driver hardware enable line | |
+| `DRIVER_1_LED_TOTAL` | (Required) How many RGB lights are connected to first RGB driver | |
+| `DRIVER_2_LED_TOTAL` | (Optional) How many RGB lights are connected to second RGB driver | |
+| `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
+| `DRIVER_LED_TOTAL` | (Required) How many RGB lights are present across all drivers | |
+| `AW_SCALING_MAX` | (Optional) LED current scaling value (0-255, higher values mean LED is brighter at full PWM) | 150 |
+| `AW_GLOBAL_CURRENT_MAX` | (Optional) Driver global current limit (0-255, higher values means the driver may consume more power) | 150 |
+| `AW_SPI_DIVISOR` | (Optional) Clock divisor for SPI communication (powers of 2, smaller numbers means faster communication, should not be less than 4) | 4 |
+
+Here is an example using 2 drivers.
+
+```c
+#define DRIVER_1_CS B13
+#define DRIVER_2_CS B14
+// Hardware enable lines may be connected to the same pin
+#define DRIVER_1_EN C13
+#define DRIVER_2_EN C13
+
+#define DRIVER_COUNT 2
+#define DRIVER_1_LED_TOTAL 66
+#define DRIVER_2_LED_TOTAL 32
+#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
+```
+
+!> Note the parentheses, this is so when `DRIVER_LED_TOTAL` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`.
+
+Define these arrays listing all the LEDs in your `<keyboard>.c`:
+
+```c
+const aw_led __flash g_aw_leds[DRIVER_LED_TOTAL] = {
+/* Each AW20216 channel is controlled by a register at some offset between 0x00
+ * and 0xD7 inclusive.
+ * See drivers/awinic/aw20216.h for the mapping between register offsets and
+ * driver pin locations.
+ * driver
+ * | R location
+ * | | G location
+ * | | | B location
+ * | | | | */
+ { 0, CS1_SW1, CS2_SW1, CS3_SW1 },
+ { 0, CS4_SW1, CS5_SW1, CS6_SW1 },
+ { 0, CS7_SW1, CS8_SW1, CS9_SW1 },
+ { 0, CS10_SW1, CS11_SW1, CS12_SW1 },
+ { 0, CS13_SW1, CS14_SW1, CS15_SW1 },
+ ...
+ { 1, CS1_SW1, CS2_SW1, CS3_SW1 },
+ { 1, CS13_SW1, CS14_SW1, CS15_SW1 },
+ { 1, CS16_SW1, CS17_SW1, CS18_SW1 },
+ { 1, CS4_SW2, CS5_SW2, CS6_SW2 },
+ ...
+};
+```
+
+---
## Common Configuration :id=common-configuration
@@ -485,28 +569,29 @@ For inspiration and examples, check out the built-in effects under `quantum/rgb_
These are shorthands to popular colors. The `RGB` ones can be passed to the `setrgb` functions, while the `HSV` ones to the `sethsv` functions.
-|RGB |HSV |
-|-------------------|-------------------|
-|`RGB_WHITE` |`HSV_WHITE` |
-|`RGB_RED` |`HSV_RED` |
-|`RGB_CORAL` |`HSV_CORAL` |
-|`RGB_ORANGE` |`HSV_ORANGE` |
-|`RGB_GOLDENROD` |`HSV_GOLDENROD` |
-|`RGB_GOLD` |`HSV_GOLD` |
-|`RGB_YELLOW` |`HSV_YELLOW` |
-|`RGB_CHARTREUSE` |`HSV_CHARTREUSE` |
-|`RGB_GREEN` |`HSV_GREEN` |
-|`RGB_SPRINGGREEN` |`HSV_SPRINGGREEN` |
-|`RGB_TURQUOISE` |`HSV_TURQUOISE` |
-|`RGB_TEAL` |`HSV_TEAL` |
-|`RGB_CYAN` |`HSV_CYAN` |
-|`RGB_AZURE` |`HSV_AZURE` |
-|`RGB_BLUE` |`HSV_BLUE` |
-|`RGB_PURPLE` |`HSV_PURPLE` |
-|`RGB_MAGENTA` |`HSV_MAGENTA` |
-|`RGB_PINK` |`HSV_PINK` |
-
-These are defined in [`rgblight_list.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight_list.h). Feel free to add to this list!
+|RGB |HSV |
+|---------------------|---------------------|
+|`RGB_AZURE` |`HSV_AZURE` |
+|`RGB_BLACK`/`RGB_OFF`|`HSV_BLACK`/`HSV_OFF`|
+|`RGB_BLUE` |`HSV_BLUE` |
+|`RGB_CHARTREUSE` |`HSV_CHARTREUSE` |
+|`RGB_CORAL` |`HSV_CORAL` |
+|`RGB_CYAN` |`HSV_CYAN` |
+|`RGB_GOLD` |`HSV_GOLD` |
+|`RGB_GOLDENROD` |`HSV_GOLDENROD` |
+|`RGB_GREEN` |`HSV_GREEN` |
+|`RGB_MAGENTA` |`HSV_MAGENTA` |
+|`RGB_ORANGE` |`HSV_ORANGE` |
+|`RGB_PINK` |`HSV_PINK` |
+|`RGB_PURPLE` |`HSV_PURPLE` |
+|`RGB_RED` |`HSV_RED` |
+|`RGB_SPRINGGREEN` |`HSV_SPRINGGREEN` |
+|`RGB_TEAL` |`HSV_TEAL` |
+|`RGB_TURQUOISE` |`HSV_TURQUOISE` |
+|`RGB_WHITE` |`HSV_WHITE` |
+|`RGB_YELLOW` |`HSV_YELLOW` |
+
+These are defined in [`color.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/color.h). Feel free to add to this list!
## Additional `config.h` Options :id=additional-configh-options
@@ -656,30 +741,3 @@ void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) {
}
}
```
-
-### Suspended state :id=suspended-state
-To use the suspend feature, make sure that `#define RGB_DISABLE_WHEN_USB_SUSPENDED true` is added to the `config.h` file.
-
-Additionally add this to your `<keyboard>.c`:
-
-```c
-void suspend_power_down_kb(void) {
- rgb_matrix_set_suspend_state(true);
- suspend_power_down_user();
-}
-
-void suspend_wakeup_init_kb(void) {
- rgb_matrix_set_suspend_state(false);
- suspend_wakeup_init_user();
-}
-```
-or add this to your `keymap.c`:
-```c
-void suspend_power_down_user(void) {
- rgb_matrix_set_suspend_state(true);
-}
-
-void suspend_wakeup_init_user(void) {
- rgb_matrix_set_suspend_state(false);
-}
-```