summaryrefslogtreecommitdiffstats
path: root/docs/feature_joystick.md
diff options
context:
space:
mode:
Diffstat (limited to 'docs/feature_joystick.md')
-rw-r--r--docs/feature_joystick.md121
1 files changed, 63 insertions, 58 deletions
diff --git a/docs/feature_joystick.md b/docs/feature_joystick.md
index 2635298587..a5e4921f9b 100644
--- a/docs/feature_joystick.md
+++ b/docs/feature_joystick.md
@@ -70,71 +70,44 @@ When the ADC reads 900 or higher, the returned axis value will be -127, whereas
In this example, the first axis will be read from the `A4` pin while `B0` is set high and `A7` is set low, using `analogReadPin()`, whereas the second axis will not be read.
-In order to give a value to the second axis, you can do so in any customizable entry point: as an action, in `process_record_user()` or in `matrix_scan_user()`, or even in `joystick_task()` which is called even when no key has been pressed.
-You assign a value by writing to `joystick_status.axes[axis_index]` a signed 8-bit value (ranging from -127 to 127). Then it is necessary to assign the flag `JS_UPDATED` to `joystick_status.status` in order for an updated HID report to be sent.
+#### Virtual Axes
-The following example writes two axes based on keypad presses, with `KC_P5` as a precision modifier:
+To give a value to virtual axes, call `joystick_set_axis(axis, value)`.
+
+The following example adjusts two virtual axes (X and Y) based on keypad presses, with `KC_P5` as a precision modifier:
```c
-#ifdef ANALOG_JOYSTICK_ENABLE
-static uint8_t precision_val = 70;
-static uint8_t axesFlags = 0;
-enum axes {
- Precision = 1,
- Axis1High = 2,
- Axis1Low = 4,
- Axis2High = 8,
- Axis2Low = 16
+joystick_config_t joystick_axes[JOYSTICK_AXES_COUNT] = {
+ [0] = JOYSTICK_AXIS_VIRTUAL, // x
+ [1] = JOYSTICK_AXIS_VIRTUAL // y
};
-#endif
+
+static bool precision = false;
+static uint16_t precision_mod = 64;
+static uint16_t axis_val = 127;
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- switch(keycode) {
-#ifdef ANALOG_JOYSTICK_ENABLE
- // virtual joystick
-# if JOYSTICK_AXES_COUNT > 1
+ int16_t precision_val = axis_val;
+ if (precision) {
+ precision_val -= precision_mod;
+ }
+
+ switch (keycode) {
case KC_P8:
- if (record->event.pressed) {
- axesFlags |= Axis2Low;
- } else {
- axesFlags &= ~Axis2Low;
- }
- joystick_status.status |= JS_UPDATED;
- break;
+ joystick_set_axis(1, record->event.pressed ? -precision_val : 0);
+ return false;
case KC_P2:
- if (record->event.pressed) {
- axesFlags |= Axis2High;
- } else {
- axesFlags &= ~Axis2High;
- }
- joystick_status.status |= JS_UPDATED;
- break;
-# endif
+ joystick_set_axis(1, record->event.pressed ? precision_val : 0);
+ return false;
case KC_P4:
- if (record->event.pressed) {
- axesFlags |= Axis1Low;
- } else {
- axesFlags &= ~Axis1Low;
- }
- joystick_status.status |= JS_UPDATED;
- break;
+ joystick_set_axis(0, record->event.pressed ? -precision_val : 0);
+ return false;
case KC_P6:
- if (record->event.pressed) {
- axesFlags |= Axis1High;
- } else {
- axesFlags &= ~Axis1High;
- }
- joystick_status.status |= JS_UPDATED;
- break;
+ joystick_set_axis(0, record->event.pressed ? precision_val : 0);
+ return false;
case KC_P5:
- if (record->event.pressed) {
- axesFlags |= Precision;
- } else {
- axesFlags &= ~Precision;
- }
- joystick_status.status |= JS_UPDATED;
- break;
-#endif
+ precision = record->event.pressed;
+ return false;
}
return true;
}
@@ -146,9 +119,41 @@ By default, the resolution of each axis is 8 bit, giving a range of -127 to +127
Note that the supported AVR MCUs have a 10-bit ADC, and 12-bit for most STM32 MCUs.
-### Triggering Joystick Buttons
-
-Joystick buttons are normal Quantum keycodes, defined as `JS_BUTTON0` to `JS_BUTTON31`, depending on the number of buttons you have configured.
-To trigger a joystick button, just add the corresponding keycode to your keymap.
+### Keycodes
+
+|Key |Aliases|Description|
+|-----------------------|-------|-----------|
+|`QK_JOYSTICK_BUTTON_0` |`JS_0` |Button 0 |
+|`QK_JOYSTICK_BUTTON_1` |`JS_1` |Button 1 |
+|`QK_JOYSTICK_BUTTON_2` |`JS_2` |Button 2 |
+|`QK_JOYSTICK_BUTTON_3` |`JS_3` |Button 3 |
+|`QK_JOYSTICK_BUTTON_4` |`JS_4` |Button 4 |
+|`QK_JOYSTICK_BUTTON_5` |`JS_5` |Button 5 |
+|`QK_JOYSTICK_BUTTON_6` |`JS_6` |Button 6 |
+|`QK_JOYSTICK_BUTTON_7` |`JS_7` |Button 7 |
+|`QK_JOYSTICK_BUTTON_8` |`JS_8` |Button 8 |
+|`QK_JOYSTICK_BUTTON_9` |`JS_9` |Button 9 |
+|`QK_JOYSTICK_BUTTON_10`|`JS_10`|Button 10 |
+|`QK_JOYSTICK_BUTTON_11`|`JS_11`|Button 11 |
+|`QK_JOYSTICK_BUTTON_12`|`JS_12`|Button 12 |
+|`QK_JOYSTICK_BUTTON_13`|`JS_13`|Button 13 |
+|`QK_JOYSTICK_BUTTON_14`|`JS_14`|Button 14 |
+|`QK_JOYSTICK_BUTTON_15`|`JS_15`|Button 15 |
+|`QK_JOYSTICK_BUTTON_16`|`JS_16`|Button 16 |
+|`QK_JOYSTICK_BUTTON_17`|`JS_17`|Button 17 |
+|`QK_JOYSTICK_BUTTON_18`|`JS_18`|Button 18 |
+|`QK_JOYSTICK_BUTTON_19`|`JS_19`|Button 19 |
+|`QK_JOYSTICK_BUTTON_20`|`JS_20`|Button 20 |
+|`QK_JOYSTICK_BUTTON_21`|`JS_21`|Button 21 |
+|`QK_JOYSTICK_BUTTON_22`|`JS_22`|Button 22 |
+|`QK_JOYSTICK_BUTTON_23`|`JS_23`|Button 23 |
+|`QK_JOYSTICK_BUTTON_24`|`JS_24`|Button 24 |
+|`QK_JOYSTICK_BUTTON_25`|`JS_25`|Button 25 |
+|`QK_JOYSTICK_BUTTON_26`|`JS_26`|Button 26 |
+|`QK_JOYSTICK_BUTTON_27`|`JS_27`|Button 27 |
+|`QK_JOYSTICK_BUTTON_28`|`JS_28`|Button 28 |
+|`QK_JOYSTICK_BUTTON_29`|`JS_29`|Button 29 |
+|`QK_JOYSTICK_BUTTON_30`|`JS_30`|Button 30 |
+|`QK_JOYSTICK_BUTTON_31`|`JS_31`|Button 31 |
You can also trigger joystick buttons in code with `register_joystick_button(button)` and `unregister_joystick_button(button)`, where `button` is the 0-based button index (0 = button 1).
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 23:48:09 +0000