summaryrefslogtreecommitdiffstats
path: root/docs/feature_haptic_feedback.md
diff options
context:
space:
mode:
Diffstat (limited to 'docs/feature_haptic_feedback.md')
-rw-r--r--docs/feature_haptic_feedback.md36
1 files changed, 18 insertions, 18 deletions
diff --git a/docs/feature_haptic_feedback.md b/docs/feature_haptic_feedback.md
index f4546b6914..b456bad736 100644
--- a/docs/feature_haptic_feedback.md
+++ b/docs/feature_haptic_feedback.md
@@ -32,21 +32,21 @@ The following `config.h` settings are available for all types of haptic feedback
Not all keycodes below will work depending on which haptic mechanism you have chosen.
-| Name | Description |
-|-----------|-------------------------------------------------------|
-|`HPT_ON` | Turn haptic feedback on |
-|`HPT_OFF` | Turn haptic feedback off |
-|`HPT_TOG` | Toggle haptic feedback on/off |
-|`HPT_RST` | Reset haptic feedback config to default |
-|`HPT_FBK` | Toggle feedback to occur on keypress, release or both |
-|`HPT_BUZ` | Toggle solenoid buzz on/off |
-|`HPT_MODI` | Go to next DRV2605L waveform |
-|`HPT_MODD` | Go to previous DRV2605L waveform |
-|`HPT_CONT` | Toggle continuous haptic mode on/off |
-|`HPT_CONI` | Increase DRV2605L continous haptic strength |
-|`HPT_COND` | Decrease DRV2605L continous haptic strength |
-|`HPT_DWLI` | Increase Solenoid dwell time |
-|`HPT_DWLD` | Decrease Solenoid dwell time |
+| Key | Aliases | Description |
+|-----------------------------|---------|-------------------------------------------------------|
+|`QK_HAPTIC_ON` |`HF_ON` | Turn haptic feedback on |
+|`QK_HAPTIC_OFF` |`HF_OFF` | Turn haptic feedback off |
+|`QK_HAPTIC_TOGGLE` |`HF_TOGG`| Toggle haptic feedback on/off |
+|`QK_HAPTIC_RESET` |`HF_RST` | Reset haptic feedback config to default |
+|`QK_HAPTIC_FEEDBACK_TOGGLE` |`HF_FDBK`| Toggle feedback to occur on keypress, release or both |
+|`QK_HAPTIC_BUZZ_TOGGLE` |`HF_BUZZ`| Toggle solenoid buzz on/off |
+|`QK_HAPTIC_MODE_NEXT` |`HF_NEXT`| Go to next DRV2605L waveform |
+|`QK_HAPTIC_MODE_PREVIOUS` |`HF_PREV`| Go to previous DRV2605L waveform |
+|`QK_HAPTIC_CONTINUOUS_TOGGLE`|`HF_CONT`| Toggle continuous haptic mode on/off |
+|`QK_HAPTIC_CONTINUOUS_UP` |`HF_CONU`| Increase DRV2605L continous haptic strength |
+|`QK_HAPTIC_CONTINUOUS_DOWN` |`HF_COND`| Decrease DRV2605L continous haptic strength |
+|`QK_HAPTIC_DWELL_UP` |`HF_DWLU`| Increase Solenoid dwell time |
+|`QK_HAPTIC_DWELL_DOWN` |`HF_DWLD`| Decrease Solenoid dwell time |
### Solenoids
@@ -68,8 +68,8 @@ For relay switches, the hardware may already contain all of that ciruitry, and j
|`SOLENOID_DEFAULT_DWELL` | `12` ms |Configures the default dwell time for the switch. |
|`SOLENOID_MIN_DWELL` | `4` ms |Sets the lower limit for the dwell. |
|`SOLENOID_MAX_DWELL` | `100` ms |Sets the upper limit for the dwell. |
-|`SOLENOID_DWELL_STEP_SIZE` | `1` ms |The step size to use when `HPT_DWL*` keycodes are sent. |
-|`SOLENOID_DEFAULT_BUZZ` | `0` (disabled) |On HPT_RST buzz is set "on" if this is "1" |
+|`SOLENOID_DWELL_STEP_SIZE` | `1` ms |The step size to use when `HF_DWL*` keycodes are sent. |
+|`SOLENOID_DEFAULT_BUZZ` | `0` (disabled) |On `HF_RST` buzz is set "on" if this is "1" |
|`SOLENOID_BUZZ_ACTUATED` | `SOLENOID_MIN_DWELL` |Actuated-time when the switch is in buzz mode. |
|`SOLENOID_BUZZ_NONACTUATED` | `SOLENOID_MIN_DWELL` |Non-Actuated-time when the switch is in buzz mode. |
@@ -178,7 +178,7 @@ If haptic feedback is enabled, the keyboard will vibrate to a specific sequence
```
#define DRV_MODE_DEFAULT *sequence name or number*
```
-This will set what sequence HPT_RST will set as the active mode. If not defined, mode will be set to 1 when HPT_RST is pressed.
+This will set what sequence `HF_RST` will set as the active mode. If not defined, mode will be set to 1 when `HF_RST` is pressed.
### DRV2605L Continuous Haptic Mode