diff options
Diffstat (limited to 'docs/feature_haptic_feedback.md')
| -rw-r--r-- | docs/feature_haptic_feedback.md | 21 |
1 files changed, 18 insertions, 3 deletions
diff --git a/docs/feature_haptic_feedback.md b/docs/feature_haptic_feedback.md index 1f36f5b054..c8c74cb8f0 100644 --- a/docs/feature_haptic_feedback.md +++ b/docs/feature_haptic_feedback.md @@ -4,9 +4,22 @@ The following options are currently available for haptic feedback in `rules.mk`: -`HAPTIC_ENABLE += DRV2605L` +``` +HAPTIC_ENABLE = yes + +HAPTIC_DRIVER += DRV2605L +HAPTIC_DRIVER += SOLENOID +``` + +The following `config.h` settings are available for all types of haptic feedback: -`HAPTIC_ENABLE += SOLENOID` +| Settings | Default | Description | +|--------------------------------------|---------------|---------------------------------------------------------------------------------------------------------------| +|`HAPTIC_ENABLE_PIN` | *Not defined* |Configures a pin to enable a boost converter for some haptic solution, often used with solenoid drivers. | +|`HAPTIC_ENABLE_PIN_ACTIVE_LOW` | *Not defined* |If defined then the haptic enable pin is active-low. | +|`HAPTIC_ENABLE_STATUS_LED` | *Not defined* |Configures a pin to reflect the current enabled/disabled status of haptic feedback. | +|`HAPTIC_ENABLE_STATUS_LED_ACTIVE_LOW` | *Not defined* |If defined then the haptic status led will be active-low. | +|`HAPTIC_OFF_IN_LOW_POWER` | `0` |If set to `1`, haptic feedback is disabled before the device is configured, and while the device is suspended. | ## Known Supported Hardware @@ -45,6 +58,7 @@ First you will need a build a circuit to drive the solenoid through a mosfet as | Settings | Default | Description | |----------------------------|----------------------|-------------------------------------------------------| |`SOLENOID_PIN` | *Not defined* |Configures the pin that the Solenoid is connected to. | +|`SOLENOID_PIN_ACTIVE_LOW` | *Not defined* |If defined then the solenoid trigger pin is active low.| |`SOLENOID_DEFAULT_DWELL` | `12` ms |Configures the default dwell time for the solenoid. | |`SOLENOID_MIN_DWELL` | `4` ms |Sets the lower limit for the dwell. | |`SOLENOID_MAX_DWELL` | `100` ms |Sets the upper limit for the dwell. | @@ -170,8 +184,9 @@ The Haptic Exclusion is implemented as `__attribute__((weak)) bool get_haptic_en ### NO_HAPTIC_MOD With the entry of `#define NO_HAPTIC_MOD` in config.h, the following keys will not trigger feedback: -* Usual modifier keys such as Control/Shift/Alt/Gui (For example `KC_LCTRL`) +* Usual modifier keys such as Control/Shift/Alt/Gui (For example `KC_LCTL`) * `MO()` momentary keys. See also [Layers](feature_layers.md). +* `LM()` momentary keys with mod active. * `LT()` layer tap keys, when held to activate a layer. However when tapped, and the key is quickly released, and sends a keycode, haptic feedback is still triggered. * `TT()` layer tap toggle keys, when held to activate a layer. However when tapped `TAPPING_TOGGLE` times to permanently toggle the layer, on the last tap haptic feedback is still triggered. * `MT()` mod tap keys, when held to keep a usual modifier key pressed. However when tapped, and the key is quickly released, and sends a keycode, haptic feedback is still triggered. See also [Mod-Tap](mod_tap.md). |