diff options
Diffstat (limited to 'docs/faq.md')
| -rw-r--r-- | docs/faq.md | 70 |
1 files changed, 22 insertions, 48 deletions
diff --git a/docs/faq.md b/docs/faq.md index 0636d8b544..c46861030c 100644 --- a/docs/faq.md +++ b/docs/faq.md @@ -1,31 +1,33 @@ -## READ FIRST -- **README** of top directory : https://github.com/tmk/tmk_keyboard/blob/master/README.md -- **README** of target project(keyboard/converter) directory. +# Frequently Asked Questions -Note that you'll need to read **both**. +## What is QMK? +[QMK](https://github.com/qmk), short for Quantum Mechanical Keyboard, is a group of people building tools for custom keyboards. We started with the [QMK firmware](https://github.com/qmk/qmk_firmware), a heavily modified fork of [TMK](https://github.com/tmk/tmk_keyboard). -# Build -- [[FAQ/Build]] +## What Differences Are There Between QMK and TMK? +TMK was originally designed and implemented by [Jun Wako](https://github.com/tmk). QMK started as [Jack Humbert's](https://github.com/jackhumbert) fork of TMK for the Planck. After a while Jack's fork had diverged quite a bit from TMK, and in 2015 Jack decided to rename his fork to QMK. -# Keymap -- [[FAQ/Keymap]] +From a technical standpoint QMK builds upon TMK by adding several new features. Most notably QMK has expanded the number of available keycodes and uses these to implement advanced features like `S()`, `LCTL()`, and `MO()`. You can see a complete list of these keycodes in [Quantum Keycodes](quantum_keycodes.html). +From a project and community management standpoint TMK prefers to have keyboards maintained in separate forks while QMK prefers to have keyboards maintained in one central repository. # Debug Console ## hid_listen can't recognize device When debug console of your device is not ready you will see like this: - Waiting for device:......... +``` +Waiting for device:......... +``` once the device is pluged in then *hid_listen* finds it you will get this message: - Waiting for new device:......................... - Listening: +``` +Waiting for new device:......................... +Listening: +``` -Check if you can't get this 'Listening:' message: -- build with `CONSOLE_ENABLE=yes` in **Makefile**. +If you can't get this 'Listening:' message try building with `CONSOLE_ENABLE=yes` in [Makefile] You may need privilege to access the device on OS like Linux. - try `sudo hid_listen` @@ -73,41 +75,13 @@ Without reset circuit you will have inconsistent reuslt due to improper initiali ## Can't read column of matrix beyond 16 -Use `1UL<<16` instead of `1<<16` in `read_cols()` in **matrix.h** when your columns goes beyond 16. +Use `1UL<<16` instead of `1<<16` in `read_cols()` in [matrix.h] when your columns goes beyond 16. -In C `1` means one of **int** type which is **16bit** in case of AVR so you can't shift left more than 15. You will get unexpected zero when you say `1<<16`. You have to use **unsigned long** type with `1UL`. +In C `1` means one of [int] type which is [16bit] in case of AVR so you can't shift left more than 15. You will get unexpected zero when you say `1<<16`. You have to use [unsigned long] type with `1UL`. http://deskthority.net/workshop-f7/rebuilding-and-redesigning-a-classic-thinkpad-keyboard-t6181-60.html#p146279 - -## Pull-up Resistor -In some case converters needed to have pull-up resistors to work correctly. Place the resistor between VCC and signal line in parallel. - -For example: -``` -Keyboard Conveter - ,------. -5V------+------|VCC | - | | | - R | | - | | | -Signal--+------|PD0 | - | | -GND------------|GND | - `------' -R: 1K Ohm resistor -``` - -https://github.com/tmk/tmk_keyboard/issues/71 - - -## Arduino Micro's pin naming is confusing -Note that Arduino Micro PCB marking is different from real AVR port name. D0 of Arduino Micro is not PD0, PD0 is D3. Check schematic yourself. -http://arduino.cc/en/uploads/Main/arduino-micro-schematic.pdf - - - ## Bootloader jump doesn't work Properly configure bootloader size in **Makefile**. With wrong section size bootloader won't probably start with **Magic command** and **Boot Magic**. ``` @@ -157,20 +131,20 @@ https://github.com/tmk/tmk_keyboard/issues/179 ## Special Extra key doesn't work(System, Audio control keys) -You need to define `EXTRAKEY_ENABLE` in **makefile** to use them in TMK. +You need to define `EXTRAKEY_ENABLE` in `rules.mk` to use them in QMK. + ``` EXTRAKEY_ENABLE = yes # Audio control and System control ``` -http://deskthority.net/workshop-f7/tmk-keyboard-firmware-collection-t4478-60.html#p157919 - ## Wakeup from sleep doesn't work + In Windows check `Allow this device to wake the computer` setting in Power **Management property** tab of **Device Manager**. Also check BIOS setting. Pressing any key during sleep should wake host. - ## Using Arduino? + **Note that Arduino pin naming is different from actual chip.** For example, Arduino pin `D0` is not `PD0`. Check circuit with its schematics yourself. - http://arduino.cc/en/uploads/Main/arduino-leonardo-schematic_3b.pdf @@ -235,4 +209,4 @@ https://geekhack.org/index.php?topic=41989.msg1967778#msg1967778 ## FLIP doesn't work ### AtLibUsbDfu.dll not found Remove current driver and reinstall one FLIP provides from DeviceManager. -http://imgur.com/a/bnwzy
\ No newline at end of file +http://imgur.com/a/bnwzy |