diff options
Diffstat (limited to 'docs/config_options.md')
| -rw-r--r-- | docs/config_options.md | 33 |
1 files changed, 12 insertions, 21 deletions
diff --git a/docs/config_options.md b/docs/config_options.md index 8227a0e074..3e011a5cc9 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -57,8 +57,6 @@ This is a C header file that is one of the first things included, and will persi * may be omitted by the keyboard designer if matrix reads are handled in an alternate manner. See [low-level matrix overrides](custom_quantum_functions.md?id=low-level-matrix-overrides) for more information. * `#define MATRIX_IO_DELAY 30` * the delay in microseconds when between changing matrix pin state and reading values -* `#define UNUSED_PINS { D1, D2, D3, B1, B2, B3 }` - * pins unused by the keyboard for reference * `#define MATRIX_HAS_GHOST` * define is matrix has ghost (unlikely) * `#define MATRIX_UNSELECT_DRIVE_HIGH` @@ -107,8 +105,10 @@ This is a C header file that is one of the first things included, and will persi * sets the maximum power (in mA) over USB for the device (default: 500) * `#define USB_POLLING_INTERVAL_MS 10` * sets the USB polling rate in milliseconds for the keyboard, mouse, and shared (NKRO/media keys) interfaces -* `#define USB_SUSPEND_WAKEUP_DELAY 200` - * set the number of milliseconde to pause after sending a wakeup packet +* `#define USB_SUSPEND_WAKEUP_DELAY 0` + * sets the number of milliseconds to pause after sending a wakeup packet. + Disabled by default, you might want to set this to 200 (or higher) if the + keyboard does not wake up properly after suspending. * `#define F_SCL 100000L` * sets the I2C clock rate speed for keyboards using I2C. The default is `400000L`, except for keyboards using `split_common`, where the default is `100000L`. @@ -141,7 +141,7 @@ If you define these options you will enable the associated feature, which may in ## Behaviors That Can Be Configured * `#define TAPPING_TERM 200` - * how long before a tap becomes a hold, if set above 500, a key tapped during the tapping term will turn it into a hold too + * how long before a key press becomes a hold * `#define TAPPING_TERM_PER_KEY` * enables handling for per key `TAPPING_TERM` settings * `#define RETRO_TAPPING` @@ -174,19 +174,12 @@ If you define these options you will enable the associated feature, which may in * sets the timer for leader key chords to run on each key press rather than overall * `#define LEADER_KEY_STRICT_KEY_PROCESSING` * Disables keycode filtering for Mod-Tap and Layer-Tap keycodes. Eg, if you enable this, you would need to specify `MT(MOD_CTL, KC_A)` if you want to use `KC_A`. +* `#define MOUSE_EXTENDED_REPORT` + * Enables support for extended reports (-32767 to 32767, instead of -127 to 127), which may allow for smoother reporting, and prevent maxing out of the reports. Applies to both Pointing Device and Mousekeys. * `#define ONESHOT_TIMEOUT 300` * how long before oneshot times out * `#define ONESHOT_TAP_TOGGLE 2` * how many taps before oneshot toggle is triggered -* `#define QMK_KEYS_PER_SCAN 4` - * Allows sending more than one key per scan. By default, only one key event gets - sent via `process_record()` per scan. This has little impact on most typing, but - if you're doing a lot of chords, or your scan rate is slow to begin with, you can - have some delay in processing key events. Each press and release is a separate - event. For a keyboard with 1ms or so scan times, even a very fast typist isn't - going to produce the 500 keystrokes a second needed to actually get more than a - few ms of delay from this. But if you're doing chording on something with 3-4ms - scan times? You probably want this. * `#define COMBO_COUNT 2` * Set this to the number of combos that you're using in the [Combo](feature_combo.md) feature. Or leave it undefined and programmatically set the count. * `#define COMBO_TERM 200` @@ -194,7 +187,7 @@ If you define these options you will enable the associated feature, which may in * `#define COMBO_MUST_HOLD_MODS` * Flag for enabling extending timeout on Combos containing modifers * `#define COMBO_MOD_TERM 200` - * Allows for extending COMBO_TERM for mod keys while mid-combo. + * Allows for extending COMBO_TERM for mod keys while mid-combo. * `#define COMBO_MUST_HOLD_PER_COMBO` * Flag to enable per-combo COMBO_TERM extension and `get_combo_must_hold()` function * `#define COMBO_TERM_PER_COMBO` @@ -214,14 +207,12 @@ If you define these options you will enable the associated feature, which may in * `#define RGB_DI_PIN D7` * pin the DI on the WS2812 is hooked-up to -* `#define RGBLIGHT_ANIMATIONS` - * run RGB animations * `#define RGBLIGHT_LAYERS` * Lets you define [lighting layers](feature_rgblight.md?id=lighting-layers) that can be toggled on or off. Great for showing the current keyboard layer or caps lock state. * `#define RGBLIGHT_MAX_LAYERS` * Defaults to 8. Can be expanded up to 32 if more [lighting layers](feature_rgblight.md?id=lighting-layers) are needed. * Note: Increasing the maximum will increase the firmware size and slow sync on split keyboards. -* `#define RGBLIGHT_LAYER_BLINK` +* `#define RGBLIGHT_LAYER_BLINK` * Adds ability to [blink](feature_rgblight.md?id=lighting-layer-blink) a lighting layer for a specified number of milliseconds (e.g. to acknowledge an action). * `#define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF` * If defined, then [lighting layers](feature_rgblight?id=overriding-rgb-lighting-onoff-status) will be shown even if RGB Light is off. @@ -366,8 +357,8 @@ This is a [make](https://www.gnu.org/software/make/manual/make.html) file that i * `SRC` * Used to add files to the compilation/linking list. * `LIB_SRC` - * Used to add files as a library to the compilation/linking list. - The files specified by `LIB_SRC` is linked after the files specified by `SRC`. + * Used to add files as a library to the compilation/linking list. + The files specified by `LIB_SRC` is linked after the files specified by `SRC`. For example, if you specify: ``` SRC += a.c @@ -420,7 +411,7 @@ Use these to enable or disable building certain features. The more you have enab * `NKRO_ENABLE` * USB N-Key Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work * `RING_BUFFERED_6KRO_REPORT_ENABLE` - * USB 6-Key Rollover - Instead of stopping any new input once 6 keys are pressed, the oldest key is released and the new key is pressed. + * USB 6-Key Rollover - Instead of stopping any new input once 6 keys are pressed, the oldest key is released and the new key is pressed. * `AUDIO_ENABLE` * Enable the audio subsystem. * `KEY_OVERRIDE_ENABLE` |