summaryrefslogtreecommitdiffstats
path: root/docs/config_options.md
diff options
context:
space:
mode:
Diffstat (limited to 'docs/config_options.md')
-rw-r--r--docs/config_options.md10
1 files changed, 7 insertions, 3 deletions
diff --git a/docs/config_options.md b/docs/config_options.md
index 8227a0e074..34034f7c8d 100644
--- a/docs/config_options.md
+++ b/docs/config_options.md
@@ -107,8 +107,10 @@ This is a C header file that is one of the first things included, and will persi
* sets the maximum power (in mA) over USB for the device (default: 500)
* `#define USB_POLLING_INTERVAL_MS 10`
* sets the USB polling rate in milliseconds for the keyboard, mouse, and shared (NKRO/media keys) interfaces
-* `#define USB_SUSPEND_WAKEUP_DELAY 200`
- * set the number of milliseconde to pause after sending a wakeup packet
+* `#define USB_SUSPEND_WAKEUP_DELAY 0`
+ * sets the number of milliseconds to pause after sending a wakeup packet.
+ Disabled by default, you might want to set this to 200 (or higher) if the
+ keyboard does not wake up properly after suspending.
* `#define F_SCL 100000L`
* sets the I2C clock rate speed for keyboards using I2C. The default is `400000L`, except for keyboards using `split_common`, where the default is `100000L`.
@@ -141,7 +143,7 @@ If you define these options you will enable the associated feature, which may in
## Behaviors That Can Be Configured
* `#define TAPPING_TERM 200`
- * how long before a tap becomes a hold, if set above 500, a key tapped during the tapping term will turn it into a hold too
+ * how long before a key press becomes a hold
* `#define TAPPING_TERM_PER_KEY`
* enables handling for per key `TAPPING_TERM` settings
* `#define RETRO_TAPPING`
@@ -174,6 +176,8 @@ If you define these options you will enable the associated feature, which may in
* sets the timer for leader key chords to run on each key press rather than overall
* `#define LEADER_KEY_STRICT_KEY_PROCESSING`
* Disables keycode filtering for Mod-Tap and Layer-Tap keycodes. Eg, if you enable this, you would need to specify `MT(MOD_CTL, KC_A)` if you want to use `KC_A`.
+* `#define MOUSE_EXTENDED_REPORT`
+ * Enables support for extended reports (-32767 to 32767, instead of -127 to 127), which may allow for smoother reporting, and prevent maxing out of the reports. Applies to both Pointing Device and Mousekeys.
* `#define ONESHOT_TIMEOUT 300`
* how long before oneshot times out
* `#define ONESHOT_TAP_TOGGLE 2`