summaryrefslogtreecommitdiffstats
path: root/converter/x68k_usb
diff options
context:
space:
mode:
Diffstat (limited to 'converter/x68k_usb')
-rw-r--r--converter/x68k_usb/Makefile19
-rw-r--r--converter/x68k_usb/README22
-rw-r--r--converter/x68k_usb/config_pjrc.h29
-rw-r--r--converter/x68k_usb/keymap.c20
-rw-r--r--converter/x68k_usb/led.c21
-rw-r--r--converter/x68k_usb/matrix.c13
6 files changed, 93 insertions, 31 deletions
diff --git a/converter/x68k_usb/Makefile b/converter/x68k_usb/Makefile
index 62b976c56f..948622c7c8 100644
--- a/converter/x68k_usb/Makefile
+++ b/converter/x68k_usb/Makefile
@@ -16,7 +16,7 @@ TARGET_DIR = .
SRC = keymap.c \
matrix.c \
led.c \
- x68k.c
+ protocol/serial_uart.c
CONFIG_H = config_pjrc.h
@@ -37,12 +37,23 @@ MCU = atmega32u4 # Teensy 2.0
F_CPU = 16000000
+# Boot Section Size in bytes
+# Teensy halfKay 512
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
# Build Options
# *Comment out* to disable the options.
#
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-NKRO_ENABLE = yes # USB Nkey Rollover
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
diff --git a/converter/x68k_usb/README b/converter/x68k_usb/README
index 0b61b2c4b3..5f1c2072cb 100644
--- a/converter/x68k_usb/README
+++ b/converter/x68k_usb/README
@@ -5,6 +5,7 @@ http://en.wikipedia.org/wiki/Sharp_X68000
X68000 keyboard has ALPS linear switches.
- DSETK0016CE01 green linear
+- DSETK0022CE02 yellow linear
- DSETK0023CE03 yellow linear
@@ -127,3 +128,24 @@ Scan Codes
`-----------------------------------------------------------| .---=====---. |-----------| 4E|
| 5F| 55 | 56 | 35 | 57 | 58 | 59 | 60| | 72 | 73 | | 4F| 50| 51| |
`---------------------------------------------' `-----------' `---------------'
+
+
+
+LED Special Functions
+---------------------
+http://homepage2.nifty.com/m_kamada/docs/unlistedx68k.htm#keyboard
+
+1. Random Illumination
+ Plug in with pressing F1, F2 and F3.
+
+2. Sequential Illumination
+ Plug in with pressing 記号入力(52), 登録(53) and HELP.
+
+3. Scan code Display
+ Plug in with pressing かな(5A), ローマ字(5B) and コード入力(5C).
+ You can see its scan code on LEDs by pressing a key.
+ +---------------------------------------------------+
+ |bit|6 |5 |4 |3 |2 |1 |0 |
+ |---+----+--------+---+----+----------+--------+----|
+ |LED|全角|ひらがな|INS|CAPS|コード入力|ローマ字|かな|
+ +---------------------------------------------------+
diff --git a/converter/x68k_usb/config_pjrc.h b/converter/x68k_usb/config_pjrc.h
index 2df83a2cb4..c49b4a73e1 100644
--- a/converter/x68k_usb/config_pjrc.h
+++ b/converter/x68k_usb/config_pjrc.h
@@ -34,30 +34,31 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \
- keyboard_report->mods == (MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RSHIFT)) \
+ keyboard_report->mods == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
+ keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) \
)
/* legacy keymap support */
#define USE_LEGACY_KEYMAP
-/* mouse keys */
-#ifdef MOUSEKEY_ENABLE
-# define MOUSEKEY_DELAY_TIME 255
-#endif
-
/* USART configuration
* asynchronous, 2400baud, 8-data bit, non parity, 1-stop bit, no flow control
*/
#ifdef __AVR_ATmega32U4__
-# define KBD_RX_VECT USART1_RX_vect
-# define KBD_RX_DATA UDR1
-# define KBD_RX_BAUD 2400
-# define KBD_RX_UBBR ((F_CPU/(16UL*KBD_RX_BAUD))-1)
-# define KBD_RX_INIT() do { \
- UBRR1L = (uint8_t) KBD_RX_UBBR; \
- UBRR1H = (uint8_t) (KBD_RX_UBBR>>8); \
- UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); \
+ #define SERIAL_UART_BAUD 2400
+ #define SERIAL_UART_DATA UDR1
+ #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
+ #define SERIAL_UART_RXD_VECT USART1_RX_vect
+ #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
+ #define SERIAL_UART_INIT() do { \
+ UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
+ UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
+ UCSR1B = (1<<RXCIE1) | (1<<RXEN1) | /* RX: interrupt, RX: enable */ \
+ (1<<TXEN1); /* TX: enable */ \
+ UCSR1C = (0<<UPM11) | (0<<UPM10) | /* parity: none(00), even(01), odd(11) */ \
+ (0<<UCSZ12) | (1<<UCSZ11) | (1<<UCSZ10); /* data-8bit(011) */ \
+ sei(); \
} while(0)
#else
# error "USART configuration is needed."
diff --git a/converter/x68k_usb/keymap.c b/converter/x68k_usb/keymap.c
index 90abb39666..5e09f55d20 100644
--- a/converter/x68k_usb/keymap.c
+++ b/converter/x68k_usb/keymap.c
@@ -113,13 +113,23 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
| 5F| 55 | 56 | 35 | 57 | 58 | 59 | 60| | 72 | 73 | | 4F| 50| 51| |
`---------------------------------------------' `-----------' `---------------'
*/
+ /* ANSI */
KEYMAP(
- NO, NO, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, PSCR,SLCK,PAUS, CAPS,NO, NO, NO,
- ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, ENT, DEL, END, PGDN, P7, P8, P9, PPLS,
- LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, UP, P4, P5, P6, PEQL,
+ F16, F17, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, PSCR,SLCK,PAUS, CAPS,F11, F12, F13,
+ ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,BSPC, HOME,INS, DEL, NLCK,PSLS,PAST,PMNS,
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, ENT, PGDN,PGUP,END, P7, P8, P9, PPLS,
+ LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,F18, UP, P4, P5, P6, PEQL,
LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH,GRV, LEFT,DOWN,RGHT, P1, P2, P3, PENT,
- LGUI,LALT,NO, SPC, RALT,RGUI,RCTL,APP, NO, NO, P0, PCMM,PDOT
+ F19, LGUI,LALT, SPC, RALT,RGUI,RCTL,APP, F14, F15, P0, PCMM,PDOT
+ ),
+ /* JIS */
+ KEYMAP(
+ F16, F17, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, PSCR,SLCK,PAUS, CAPS,F11, F12, F13,
+ ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, HOME,INS, DEL, NLCK,PSLS,PAST,PMNS,
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, ENT, PGDN,PGUP,END, P7, P8, P9, PPLS,
+ LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,NUHS, UP, P4, P5, P6, PEQL,
+ LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH,RO, LEFT,DOWN,RGHT, P1, P2, P3, PENT,
+ LGUI,LALT,MHEN, SPC, HENK,KANA,APP, ZKHK, F14, F15, P0, PCMM,PDOT
),
};
diff --git a/converter/x68k_usb/led.c b/converter/x68k_usb/led.c
index 40156cf4ac..ccc38699c7 100644
--- a/converter/x68k_usb/led.c
+++ b/converter/x68k_usb/led.c
@@ -16,11 +16,28 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "stdint.h"
-#include "x68k.h"
+#include "serial.h"
#include "led.h"
+#include "debug.h"
void led_set(uint8_t usb_led)
{
- // not supported now
+ /* X68000 LED bits 0: on, 1: off
+ * bit 7 1(fixed)
+ * bit 6 全角
+ * bit 5 ひらがな
+ * bit 4 INS
+ * bit 3 CAPS
+ * bit 2 コード入力
+ * bit 1 ローマ字
+ * bit 0 かな
+ */
+ uint8_t led = 0xFF;
+ if (usb_led&(1<<USB_LED_NUM_LOCK)) led &= ~(1<<2);
+ if (usb_led&(1<<USB_LED_CAPS_LOCK)) led &= ~(1<<3);
+ if (usb_led&(1<<USB_LED_SCROLL_LOCK)) led &= ~(1<<1);
+ if (usb_led&(1<<USB_LED_COMPOSE)) led &= ~(1<<4);
+ if (usb_led&(1<<USB_LED_KANA)) led &= ~(1<<0);
+ serial_send(led);
}
diff --git a/converter/x68k_usb/matrix.c b/converter/x68k_usb/matrix.c
index 954e7ef129..2d5a1e1169 100644
--- a/converter/x68k_usb/matrix.c
+++ b/converter/x68k_usb/matrix.c
@@ -21,8 +21,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include <util/delay.h>
#include "print.h"
#include "util.h"
-#include "x68k.h"
+#include "serial.h"
#include "matrix.h"
+#include "debug.h"
/*
@@ -63,7 +64,7 @@ uint8_t matrix_cols(void)
void matrix_init(void)
{
- x68k_init();
+ serial_init();
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
@@ -75,13 +76,13 @@ uint8_t matrix_scan(void)
{
is_modified = false;
- uint8_t code;
- code = x68k_recv();
- if (code == 0) {
+ uint16_t code;
+ code = serial_recv2();
+ if (code == -1) {
return 0;
}
- phex(code); print(" ");
+ dprintf("%02X\n", code);
if (code&0x80) {
// break code
if (matrix_is_on(ROW(code), COL(code))) {
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 00:09:21 +0000