summaryrefslogtreecommitdiffstats
path: root/converter/terminal_bluefruit/config.h
diff options
context:
space:
mode:
Diffstat (limited to 'converter/terminal_bluefruit/config.h')
-rw-r--r--converter/terminal_bluefruit/config.h112
1 files changed, 0 insertions, 112 deletions
diff --git a/converter/terminal_bluefruit/config.h b/converter/terminal_bluefruit/config.h
deleted file mode 100644
index 8bf139d35f..0000000000
--- a/converter/terminal_bluefruit/config.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
-Converter for 70% IBM Terminal Keyboard
-Author: Benjamin Gould, 2013
-Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6535
-#define DEVICE_VER 0x0100
-#define MANUFACTURER t.m.k.
-#define PRODUCT 70% IBM Terminal Keyboard Converter w/ Bluetooth
-#define DESCRIPTION USB converter for IBM Terminal Keyboard w/ Bluetooth
-
-
-/* matrix size */
-#define MATRIX_ROWS 17 // keycode bit: 3-0
-#define MATRIX_COLS 8 // keycode bit: 6-4
-
-
-/* legacy keymap support */
-// #define USE_LEGACY_KEYMAP
-
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) || \
- (keyboard_report->mods == (MOD_BIT(KC_RALT) | MOD_BIT(KC_RCTL))) \
-)
-
-/* USART configuration
- * asynchronous, 9600baud, 8-data bit, non parity, 1-stop bit, no flow control
- */
-#ifdef __AVR_ATmega32U4__
- #define SERIAL_UART_BAUD 9600
- #define SERIAL_UART_DATA UDR1
- #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
- #define SERIAL_UART_RXD_VECT USART1_RX_vect
- #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
- #define SERIAL_UART_INIT() do { \
- UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
- UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
- UCSR1B = (1<<TXEN1); /* TX: enable */ \
- UCSR1C = (0<<UPM11) | (0<<UPM10) | /* parity: none(00), even(01), odd(11) */ \
- (0<<UCSZ12) | (1<<UCSZ11) | (1<<UCSZ10); /* data-8bit(011) */ \
- sei(); \
- } while(0)
-#else
-# error "USART configuration is needed."
-#endif
-
-/*
- * PS/2 Interrupt configuration
- */
-#ifdef PS2_USE_INT
-/* uses INT1 for clock line(ATMega32U4) */
-#define PS2_CLOCK_PORT PORTD
-#define PS2_CLOCK_PIN PIND
-#define PS2_CLOCK_DDR DDRD
-#define PS2_CLOCK_BIT 1
-
-#define PS2_DATA_PORT PORTD
-#define PS2_DATA_PIN PIND
-#define PS2_DATA_DDR DDRD
-#define PS2_DATA_BIT 0
-
-#define PS2_INT_INIT() do { \
- EICRA |= ((1<<ISC11) | \
- (0<<ISC10)); \
-} while (0)
-#define PS2_INT_ON() do { \
- EIMSK |= (1<<INT1); \
-} while (0)
-#define PS2_INT_OFF() do { \
- EIMSK &= ~(1<<INT1); \
-} while (0)
-#define PS2_INT_VECT INT1_vect
-#endif
-
-
-/*
- * PS/2 Busywait configuration
- */
-#ifdef PS2_USE_BUSYWAIT
-#define PS2_CLOCK_PORT PORTD
-#define PS2_CLOCK_PIN PIND
-#define PS2_CLOCK_DDR DDRD
-#define PS2_CLOCK_BIT 1
-
-#define PS2_DATA_PORT PORTD
-#define PS2_DATA_PIN PIND
-#define PS2_DATA_DDR DDRD
-#define PS2_DATA_BIT 0
-#endif
-
-#endif