diff options
Diffstat (limited to 'converter/terminal_bluefruit/config.h')
| -rw-r--r-- | converter/terminal_bluefruit/config.h | 112 |
1 files changed, 0 insertions, 112 deletions
diff --git a/converter/terminal_bluefruit/config.h b/converter/terminal_bluefruit/config.h deleted file mode 100644 index 8bf139d35f..0000000000 --- a/converter/terminal_bluefruit/config.h +++ /dev/null @@ -1,112 +0,0 @@ -/* -Converter for 70% IBM Terminal Keyboard -Author: Benjamin Gould, 2013 -Based on code Copyright 2011 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6535 -#define DEVICE_VER 0x0100 -#define MANUFACTURER t.m.k. -#define PRODUCT 70% IBM Terminal Keyboard Converter w/ Bluetooth -#define DESCRIPTION USB converter for IBM Terminal Keyboard w/ Bluetooth - - -/* matrix size */ -#define MATRIX_ROWS 17 // keycode bit: 3-0 -#define MATRIX_COLS 8 // keycode bit: 6-4 - - -/* legacy keymap support */ -// #define USE_LEGACY_KEYMAP - - -/* key combination for command */ -#define IS_COMMAND() ( \ - (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) || \ - (keyboard_report->mods == (MOD_BIT(KC_RALT) | MOD_BIT(KC_RCTL))) \ -) - -/* USART configuration - * asynchronous, 9600baud, 8-data bit, non parity, 1-stop bit, no flow control - */ -#ifdef __AVR_ATmega32U4__ - #define SERIAL_UART_BAUD 9600 - #define SERIAL_UART_DATA UDR1 - #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1) - #define SERIAL_UART_RXD_VECT USART1_RX_vect - #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1)) - #define SERIAL_UART_INIT() do { \ - UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \ - UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \ - UCSR1B = (1<<TXEN1); /* TX: enable */ \ - UCSR1C = (0<<UPM11) | (0<<UPM10) | /* parity: none(00), even(01), odd(11) */ \ - (0<<UCSZ12) | (1<<UCSZ11) | (1<<UCSZ10); /* data-8bit(011) */ \ - sei(); \ - } while(0) -#else -# error "USART configuration is needed." -#endif - -/* - * PS/2 Interrupt configuration - */ -#ifdef PS2_USE_INT -/* uses INT1 for clock line(ATMega32U4) */ -#define PS2_CLOCK_PORT PORTD -#define PS2_CLOCK_PIN PIND -#define PS2_CLOCK_DDR DDRD -#define PS2_CLOCK_BIT 1 - -#define PS2_DATA_PORT PORTD -#define PS2_DATA_PIN PIND -#define PS2_DATA_DDR DDRD -#define PS2_DATA_BIT 0 - -#define PS2_INT_INIT() do { \ - EICRA |= ((1<<ISC11) | \ - (0<<ISC10)); \ -} while (0) -#define PS2_INT_ON() do { \ - EIMSK |= (1<<INT1); \ -} while (0) -#define PS2_INT_OFF() do { \ - EIMSK &= ~(1<<INT1); \ -} while (0) -#define PS2_INT_VECT INT1_vect -#endif - - -/* - * PS/2 Busywait configuration - */ -#ifdef PS2_USE_BUSYWAIT -#define PS2_CLOCK_PORT PORTD -#define PS2_CLOCK_PIN PIND -#define PS2_CLOCK_DDR DDRD -#define PS2_CLOCK_BIT 1 - -#define PS2_DATA_PORT PORTD -#define PS2_DATA_PIN PIND -#define PS2_DATA_DDR DDRD -#define PS2_DATA_BIT 0 -#endif - -#endif |