summaryrefslogtreecommitdiffstats
path: root/converter/serialmouse_usb/config.h
diff options
context:
space:
mode:
Diffstat (limited to 'converter/serialmouse_usb/config.h')
-rw-r--r--converter/serialmouse_usb/config.h119
1 files changed, 119 insertions, 0 deletions
diff --git a/converter/serialmouse_usb/config.h b/converter/serialmouse_usb/config.h
new file mode 100644
index 0000000000..b257d997cf
--- /dev/null
+++ b/converter/serialmouse_usb/config.h
@@ -0,0 +1,119 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include <avr/interrupt.h>
+
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x2222
+#define DEVICE_VER 0x0001
+#define MANUFACTURER t.m.k.
+#define PRODUCT serial mouse converter
+#define DESCRIPTION convert serial mouse into USB
+
+
+/* matrix size */
+#define MATRIX_ROWS 0
+#define MATRIX_COLS 0
+
+
+/* key combination for command */
+#define IS_COMMAND() false
+
+
+
+#ifdef SERIAL_MOUSE_MICROSOFT
+ /*
+ * Serial(USART) configuration (for Microsoft serial mice)
+ * asynchronous, positive logic, 1200baud, bit order: LSB first
+ * 1-start bit, 7-data bit, no parity, 1-stop bit
+ */
+ #define SERIAL_UART_BAUD 1200
+ #define SERIAL_UART_DATA UDR1
+ #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
+ #define SERIAL_UART_RXD_VECT USART1_RX_vect
+ #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
+ #define SERIAL_UART_INIT() do { \
+ UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
+ UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
+ UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
+ UCSR1C = (1<<UCSZ11) | (0<<UCSZ10); /* no parity, 1 stop bit, 7-bit characters */ \
+ sei(); \
+ } while(0)
+
+ // for Microsoft mouse protocol
+ /* Serial(USART) configuration
+ * asynchronous, negative logic, 1200baud, no flow control
+ * 1-start bit, 7-data bit, non parity, 1-stop bit
+ */
+ #define SERIAL_SOFT_BAUD 1200
+ #define SERIAL_SOFT_DATA_7BIT
+ #define SERIAL_SOFT_PARITY_NONE
+ #define SERIAL_SOFT_BIT_ORDER_LSB
+ #define SERIAL_SOFT_LOGIC_NEGATIVE
+ /* RXD Port */
+ #define SERIAL_SOFT_RXD_DDR DDRD
+ #define SERIAL_SOFT_RXD_PORT PORTD
+ #define SERIAL_SOFT_RXD_PIN PIND
+ #define SERIAL_SOFT_RXD_BIT 2
+ #define SERIAL_SOFT_RXD_VECT INT2_vect
+ /* RXD Interupt */
+ #define SERIAL_SOFT_RXD_INIT() do { \
+ /* pin configuration: input with pull-up */ \
+ SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \
+ SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \
+ /* enable interrupt: INT2(rising edge) */ \
+ EICRA |= ((1<<ISC21)|(1<<ISC20)); \
+ EIMSK |= (1<<INT2); \
+ sei(); \
+ } while (0)
+ #define SERIAL_SOFT_RXD_INT_ENTER()
+ #define SERIAL_SOFT_RXD_INT_EXIT() do { \
+ /* clear interrupt flag */ \
+ EIFR = (1<<INTF2); \
+ } while (0)
+ #define SERIAL_SOFT_RXD_READ() (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT))
+ /* TXD Port */
+ #define SERIAL_SOFT_TXD_HI()
+ #define SERIAL_SOFT_TXD_LO()
+ #define SERIAL_SOFT_TXD_INIT()
+#elif defined(SERIAL_MOUSE_MOUSESYSTEMS)
+ /*
+ * Serial(USART) configuration (for Mousesystems serial mice)
+ * asynchronous, positive logic, 1200baud, bit order: LSB first
+ * 1-start bit, 8-data bit, no parity, 1-stop bit
+ */
+ #define SERIAL_UART_BAUD 1200
+ #define SERIAL_UART_DATA UDR1
+ #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
+ #define SERIAL_UART_RXD_VECT USART1_RX_vect
+ #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
+ #define SERIAL_UART_INIT() do { \
+ UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
+ UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
+ UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
+ UCSR1C = (1<<UCSZ11) | (1<<UCSZ10); /* no parity, 1 stop bit, 8-bit characters */ \
+ sei(); \
+ } while(0)
+#endif
+
+
+
+
+#endif