diff options
Diffstat (limited to 'converter/serialmouse_usb/config.h')
| -rw-r--r-- | converter/serialmouse_usb/config.h | 119 |
1 files changed, 119 insertions, 0 deletions
diff --git a/converter/serialmouse_usb/config.h b/converter/serialmouse_usb/config.h new file mode 100644 index 0000000000..b257d997cf --- /dev/null +++ b/converter/serialmouse_usb/config.h @@ -0,0 +1,119 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include <avr/interrupt.h> + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x2222 +#define DEVICE_VER 0x0001 +#define MANUFACTURER t.m.k. +#define PRODUCT serial mouse converter +#define DESCRIPTION convert serial mouse into USB + + +/* matrix size */ +#define MATRIX_ROWS 0 +#define MATRIX_COLS 0 + + +/* key combination for command */ +#define IS_COMMAND() false + + + +#ifdef SERIAL_MOUSE_MICROSOFT + /* + * Serial(USART) configuration (for Microsoft serial mice) + * asynchronous, positive logic, 1200baud, bit order: LSB first + * 1-start bit, 7-data bit, no parity, 1-stop bit + */ + #define SERIAL_UART_BAUD 1200 + #define SERIAL_UART_DATA UDR1 + #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1) + #define SERIAL_UART_RXD_VECT USART1_RX_vect + #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1)) + #define SERIAL_UART_INIT() do { \ + UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \ + UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \ + UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \ + UCSR1C = (1<<UCSZ11) | (0<<UCSZ10); /* no parity, 1 stop bit, 7-bit characters */ \ + sei(); \ + } while(0) + + // for Microsoft mouse protocol + /* Serial(USART) configuration + * asynchronous, negative logic, 1200baud, no flow control + * 1-start bit, 7-data bit, non parity, 1-stop bit + */ + #define SERIAL_SOFT_BAUD 1200 + #define SERIAL_SOFT_DATA_7BIT + #define SERIAL_SOFT_PARITY_NONE + #define SERIAL_SOFT_BIT_ORDER_LSB + #define SERIAL_SOFT_LOGIC_NEGATIVE + /* RXD Port */ + #define SERIAL_SOFT_RXD_DDR DDRD + #define SERIAL_SOFT_RXD_PORT PORTD + #define SERIAL_SOFT_RXD_PIN PIND + #define SERIAL_SOFT_RXD_BIT 2 + #define SERIAL_SOFT_RXD_VECT INT2_vect + /* RXD Interupt */ + #define SERIAL_SOFT_RXD_INIT() do { \ + /* pin configuration: input with pull-up */ \ + SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \ + SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \ + /* enable interrupt: INT2(rising edge) */ \ + EICRA |= ((1<<ISC21)|(1<<ISC20)); \ + EIMSK |= (1<<INT2); \ + sei(); \ + } while (0) + #define SERIAL_SOFT_RXD_INT_ENTER() + #define SERIAL_SOFT_RXD_INT_EXIT() do { \ + /* clear interrupt flag */ \ + EIFR = (1<<INTF2); \ + } while (0) + #define SERIAL_SOFT_RXD_READ() (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT)) + /* TXD Port */ + #define SERIAL_SOFT_TXD_HI() + #define SERIAL_SOFT_TXD_LO() + #define SERIAL_SOFT_TXD_INIT() +#elif defined(SERIAL_MOUSE_MOUSESYSTEMS) + /* + * Serial(USART) configuration (for Mousesystems serial mice) + * asynchronous, positive logic, 1200baud, bit order: LSB first + * 1-start bit, 8-data bit, no parity, 1-stop bit + */ + #define SERIAL_UART_BAUD 1200 + #define SERIAL_UART_DATA UDR1 + #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1) + #define SERIAL_UART_RXD_VECT USART1_RX_vect + #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1)) + #define SERIAL_UART_INIT() do { \ + UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \ + UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \ + UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \ + UCSR1C = (1<<UCSZ11) | (1<<UCSZ10); /* no parity, 1 stop bit, 8-bit characters */ \ + sei(); \ + } while(0) +#endif + + + + +#endif |