summaryrefslogtreecommitdiffstats
path: root/converter/ibm4704_usb
diff options
context:
space:
mode:
Diffstat (limited to 'converter/ibm4704_usb')
-rw-r--r--converter/ibm4704_usb/Makefile93
-rw-r--r--converter/ibm4704_usb/README.md72
-rw-r--r--converter/ibm4704_usb/config.h61
-rw-r--r--converter/ibm4704_usb/ibm4704.txt182
-rw-r--r--converter/ibm4704_usb/keymap_50key.c17
-rw-r--r--converter/ibm4704_usb/keymap_alps102key.c50
-rw-r--r--converter/ibm4704_usb/keymap_common.c30
-rw-r--r--converter/ibm4704_usb/keymap_common.h146
-rw-r--r--converter/ibm4704_usb/keymap_hasu.c85
-rw-r--r--converter/ibm4704_usb/keymap_plain.c50
-rw-r--r--converter/ibm4704_usb/led.c24
-rw-r--r--converter/ibm4704_usb/matrix.c162
12 files changed, 0 insertions, 972 deletions
diff --git a/converter/ibm4704_usb/Makefile b/converter/ibm4704_usb/Makefile
deleted file mode 100644
index b5c97d2d31..0000000000
--- a/converter/ibm4704_usb/Makefile
+++ /dev/null
@@ -1,93 +0,0 @@
-# Target file name (without extension).
-TARGET = ibm4704_usb
-
-# Directory common source filess exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# project specific files
-SRC = keymap_common.c \
- matrix.c \
- led.c \
- protocol/ibm4704.c
-
-ifdef KEYMAP
- SRC := keymap_$(KEYMAP).c $(SRC)
-else
- SRC := keymap_plain.c $(SRC)
-endif
-
-CONFIG_H = config.h
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-# comment out to disable the options.
-#
-#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TMK_DIR)
-
-include $(TMK_DIR)/protocol.mk
-include $(TMK_DIR)/protocol/lufa.mk
-include $(TMK_DIR)/common.mk
-include $(TMK_DIR)/rules.mk
diff --git a/converter/ibm4704_usb/README.md b/converter/ibm4704_usb/README.md
deleted file mode 100644
index 68db4bd050..0000000000
--- a/converter/ibm4704_usb/README.md
+++ /dev/null
@@ -1,72 +0,0 @@
-IBM 4704 to USB keyboard converter
-==================================
-This firmware converts IBM 4704 keyboard protocol to USB HID.
-
-Keyboard initialization process takes a few seconds at start up. During that you will hear buzzer from the keyboard. **You need to plug USB cable after hooking up your keyboard to the converter.**
-
-
-Update
-------
-2015/09/07 Added keymap for Alps 102-key. Thanks, tai @ geekhack!
-2015/05/05 Added keymaps for 107-key, 77-key and 50-key. Thanks, orihalcon @ geekhack!
-2015/05/19 Fixed a protocol handling bug.
-
-
-
-Supported Keyboard
-------------------
-### IBM capacitive switch models:
-- 6019273 Model 100 50-key (grid layout) http://kishy.ca/?p=894
-- 6019284 Model 200 62-key Alpha(60% layout) http://kishy.ca/?p=894
-- 6019303 Model 300 77-key Expanded Alpha http://deskthority.net/photos-f62/ibm-6019303-t8502.html
-- 6020218 Model 400 107-key Full key http://kishy.ca/?p=894
-
-### Alps switch(vintage Green) models:
-
-- 5954339 Japanese 102-key http://deskthority.net/post87127.html#p87127
-- 6112883 Japanese 102-key http://geekhack.org/index.php?topic=52888.msg1194489#msg1194489
-- 6112884 Japanese 102-key http://geekhack.org/index.php?topic=50437.msg1193047#msg1193047
-- 6341739 Chinese 102-key http://geekhack.org/index.php?topic=52888.msg1176566#msg1176566
-
-
-Connector
----------
-Keyboard Plug from front:
-
- DSUB-9
- -------------
- \ N 2 3 4 5 /
- \ N N N N /
- ---------
- 2 GND
- 3 VCC 5V
- 4 DATA
- 5 CLOCK
- N No connection/No pin.
-
-
-Connection
-----------
-In case of using ATMega32U4(Teensy2.0):
-
-1. Supply power with VCC and GND.
-2. Connect CLOCK to PD1 and DATA to PD0. You can change pin with config.h.
-3. Optionally you may need pull-up register. 1KOhm probably work.
-
-
-Build Firmware
---------------
-Just run `make`:
-
- $ make
-
-To select keymap:
-
- $ make KEYMAP=[plain|...]
-
-
-Keymap
-------
-Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document(you can find in top README.md) and existent keymap files.
-
-Use `KEYMAP_ALPS102()` to define your keymap for Alps models.
diff --git a/converter/ibm4704_usb/config.h b/converter/ibm4704_usb/config.h
deleted file mode 100644
index 2fee10fd61..0000000000
--- a/converter/ibm4704_usb/config.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
-Copyright 2014 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include <avr/interrupt.h>
-
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x4707
-#define DEVICE_VER 0x0001
-#define MANUFACTURER t.m.k.
-#define PRODUCT IBM 4704 keyboard converter
-#define DESCRIPTION convert IBM 4704 keyboard to USB
-
-
-/* matrix size */
-#define MATRIX_ROWS 16 // keycode bit3-6
-#define MATRIX_COLS 8 // keycode bit0-2
-
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RCTRL)) || \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-
-
-/* Pin configuration */
-#define IBM4704_CLOCK_PORT PORTD
-#define IBM4704_CLOCK_PIN PIND
-#define IBM4704_CLOCK_DDR DDRD
-#define IBM4704_CLOCK_BIT 1
-#define IBM4704_DATA_PORT PORTD
-#define IBM4704_DATA_PIN PIND
-#define IBM4704_DATA_DDR DDRD
-#define IBM4704_DATA_BIT 0
-
-/* Pin interrupt on rising edge of clock */
-#define IBM4704_INT_INIT() do { EICRA |= ((1<<ISC11)|(1<<ISC10)); } while (0)
-#define IBM4704_INT_ON() do { EIFR |= (1<<INTF1); EIMSK |= (1<<INT1); } while (0)
-#define IBM4704_INT_OFF() do { EIMSK &= ~(1<<INT1); } while (0)
-#define IBM4704_INT_VECT INT1_vect
-
-
-#endif
diff --git a/converter/ibm4704_usb/ibm4704.txt b/converter/ibm4704_usb/ibm4704.txt
deleted file mode 100644
index e2d42f08fd..0000000000
--- a/converter/ibm4704_usb/ibm4704.txt
+++ /dev/null
@@ -1,182 +0,0 @@
-IBM 4704 Keyboard
-=================
-IBM capacitive switch models:
- 6019273 Model 100 50-key (grid layout) http://kishy.ca/?p=894
- 6019284 Model 200 62-key Alpha(60% layout) http://kishy.ca/?p=894
- 6019303 Model 300 77-key Expanded Alpha http://deskthority.net/photos-f62/ibm-6019303-t8502.html
- 6020218 Model 400 107-key Full key http://kishy.ca/?p=894
-
-Alps switch(vintage Green) models:
- 5954339 Japanese 102-key http://deskthority.net/post87127.html#p87127
- 6112883 Japanese 102-key http://geekhack.org/index.php?topic=52888.msg1194489#msg1194489
- 6112884 Japanese 102-key http://geekhack.org/index.php?topic=50437.msg1193047#msg1193047
- 6341739 Chinese 102-key http://geekhack.org/index.php?topic=52888.msg1176566#msg1176566
-
-Resourse
---------
-The IBM 4704: lots of pictures and info
-http://kishy.dyndns.org/?p=648#more-648
-
-Brochure:
-http://ed-thelen.org/comp-hist/IBM-ProdAnn/4700.pdf
-
-
-
-IBM 4704 Keyboard Protocol
-==========================
-On powering up keyboard sends keyboard ID; A3h for 6019284(62-key), for example.
-After that the keyboard enters FC command mode and waits for parameter data from host
-so that it doesn't send any scancode until you send 'FF'(End of FC command mode).
-
- Keyboard ID
- -------------------------------
- Model 100 50-key A2h
- Model 200 62-key A3h
- Model 300 77-key A4h
- Model 400 107-key A5h
- Japanese/Chinese 102-key A6h
-
-
-Connector
----------
- Keyboard Plug from front
-
- DSUB-9
- -------------
- \ N 2 3 4 5 /
- \ N N N N /
- ---------
- 2 GND
- 3 VCC 5V
- 4 DATA
- 5 CLOCK
- N No connection/No pin.
-
-
-Keyboard to Host
-----------------
-Data bits are LSB first and Pairty is odd. Clock has around 60us high and 30us low part.
-
- ____ __ __ __ __ __ __ __ __ __ _______
- Clock \_____/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/
- ____ ____ ____ ____ ____ ____ ____ ____ ____ ____
- Data ____/ X____X____X____X____X____X____X____X____X____X________
- Start 0 1 2 3 4 5 6 7 P Stop
-
-Start bit: can be long as 300-350us.
-Inhibit: Pull Data line down to inhibit keyboard to send.
-Timing: Host reads bit while Clock is hi.(rising edge)
-Stop bit: Keyboard pulls down Data line to lo after 9th clock.
-
-
-Host to Keyboard
-----------------
-Data bits are LSB first and Pairty is odd. Clock has around 60us high and 30us low part.
-
- ____ __ __ __ __ __ __ __ __ __ ________
- Clock \______/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/
- ^ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ___
- Data ____|__/ X____X____X____X____X____X____X____X____X____X \___
- | Start 0 1 2 3 4 5 6 7 P Stop
- Request by host
-
-Start bit: can be long as 300-350us.
-Request: Host pulls Clock line down to request to send a command.
-Timing: After Request keyboard pull up Data and down Clock line to low for start bit.
- After request host release Clock line once Data line becomes hi.
- Host wirtes a bit while Clock is hi and Keyboard reads while low.
-Stop bit: Host releases or pulls up Data line to hi after 9th clock and waits for keybaord pull down the line to lo.
-
-
-Scancodes
----------
-Keyboard doesn't send Break code for all keys except for Alt by default.
-
- 6019284 62-key:
- ,-----------------------------------------------------------.
- | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|???|BS |
- |-----------------------------------------------------------|
- |Tab | Q| W| E| R| T| Y| U| I| O| P| ￠| \| PD2|
- |-----------------------------------------------------------|
- |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| {}| PD3|
- |-----------------------------------------------------------|
- |Shif| <>| Z| X| C| V| B| N| M| ,| ,| /|???|Shift |
- |-----------------------------------------------------------|
- |Reset|blk|Alt | Space |Alt |blk|Enter|
- `-----------------------------------------------------------'
- +----------+---------------------+----------+----------+
- |` 00|PD1 04|Caps 20|LShift 30|Reset 31|
- |1 18|q 05|a 21|<> 3E|Rblank 41|
- |2 19|w 06|s 22|z 32|Alt 3F|
- |3 1A|e 13|d 23|x 33|Space 40|
- |4 10|r 14|f 24|c 34|Alt 3F|
- |5 11|t 15|g 25|v 35|Lblank 42|
- |6 12|y 16|h 26|b 36|Enter 2F|
- |7 08|u 17|j 27|n 37| |
- |8 09|i 01|k 28|m 38| |
- |9 0A|o 02|l 29|, 39| |
- |0 0F|p 03|; 2A|. 3A| |
- |- 1F|￠ 1B|' 2B|/ 3B| |
- |= 0D|\ 1C|{} 2C|??? 3C| |
- |??? 0C|PD2 1D|PD3 2D|RShift 3D| |
- |BS 0E| | | | |
- +----------+---------------------+----------+----------+
- Bit7 is 'press flag' which set 1 on press and 0 on release when break code is enabled.
-
-NOTE: When break code is enabled the key sends scancode with setting 7th bit on press
-and without it on release. That is, '`' sends 80h on press and 00h on release.
-
-
-Keyboard command
-----------------
-Keyboard accepts these commands from host.
-
- Description Entry point
- -----------------------------------------------------------
- FF Soft Reset 0008h
- FE Resend 00e8h
- FD Buzzer(emits a short beep) 00edh
- FC Set Key Flag 00f6h
- FB Soft Reset 0008h
- FA Reset 0000h
-
-
-Keyboard response
------------------
-Keyobard sends these bytes to host.
-
- Description Entry point
- -----------------------------------------------------------
- FE Overflow(key event/receive data) 00c5h, 0346h
- Memory test error 0224h
- FD Command out of bound 00d8h
- Key out of bound
- 7E Read/Parity error in receive from host 00bch
-
-
-Set Key Flag command(FC)
-------------------------
-After 'Power on Reset' firmware enters this command mode and waits for data from host,
-so that you don't need to send 'FC' and it doesn't send any scancode until you send 'FF'.
-
-Data sent from host:
-
- bit: 7 6 ... 0
- en | |
- | `-----`--- scan code
- `------------- enable bit(0: enable repeat, 1: enable break)
-
- 00-79 Enable repeat
- 80-F9 Enable break(FA-FF are used as other commands, see above.)
- FE Resend(011ah) no need to use
- FF End(0114h) exits FC command mode.
-
-Response from keyboard:
- FD Out of bound - Invalid scancode
- -- OK - No response means that command is accepted.
-
-Examples:
- To enable break code of all keys.
-
- FC 80 81 ... F7 FF
-
diff --git a/converter/ibm4704_usb/keymap_50key.c b/converter/ibm4704_usb/keymap_50key.c
deleted file mode 100644
index 97294fb45d..0000000000
--- a/converter/ibm4704_usb/keymap_50key.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include "keymap_common.h"
-
-
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- KEYMAP_50(
- F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, \
- 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, \
- Q, W, E, R, T, Y, U, I, O, P, \
- A, S, D, F, G, H, J, K, L, SCLN, \
- Z, X, C, V, B, N, M, COMM,DOT, SLSH \
- ),
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-};
-
-
diff --git a/converter/ibm4704_usb/keymap_alps102key.c b/converter/ibm4704_usb/keymap_alps102key.c
deleted file mode 100644
index f3dda718ac..0000000000
--- a/converter/ibm4704_usb/keymap_alps102key.c
+++ /dev/null
@@ -1,50 +0,0 @@
-#include "keymap_common.h"
-
-
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* Layer 0:
- * ,---------------------------------------------------------------. ,-----------. ,---------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|BS |BS |F21| |PSC|SLK|PAU| |F1 |F2 |F3 |F4 |
- * |---------------------------------------------------------------| |-----------| |---------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|F22| |Ins|Hom|PgU| |F5 |F6 |F7 |F8 |
- * |---------------------------------------------------------------| |-----------| |---------------|
- * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '|Ret|Ret |F23| |Del|End|PgD| |F9 |F10|F11|F12|
- * |---------------------------------------------------------------| |-----------| |---------------|
- * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shf|Shift |F24| | |Up | | |F13|F14|F15|F16|
- * |---------------------------------------------------------------| |-----------| |---------------|
- * |Fn0 |Gui|Alt | Space |Alt* |Gui|Fn0 | |Lef|Dow|Rig| |F17|F18|F19|F20|
- * `---------------------------------------------------------------' `-----------' `---------------'
- */
- KEYMAP_ALPS102(
- ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC,BSPC,F21, PSCR,SLCK,PAUS, F1, F2, F3, F4, \
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, F22, INS, HOME,PGUP, F5, F6, F7, F8, \
- LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,GRV, ENT, F23, DEL, END, PGDN, F9, F10, F11, F12, \
- LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH,RSFT,RSFT, F24, NO, UP, NO, F13, F14, F15, F16, \
- FN0, LGUI,LALT, SPC, RALT,RGUI, FN0, LEFT,DOWN,RGHT, F17, F18, F19, F20 \
- ),
-
- /* Layer 1:
- * ,---------------------------------------------------------------. ,-----------. ,---------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|BS |BS |F21| |VoD|VoU|Mut| |F1 |F2 |F3 |F4 |
- * |---------------------------------------------------------------| |-----------| |---------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|F22| |Ins|Hom|PgU| |F5 |F6 |F7 |F8 |
- * |---------------------------------------------------------------| |-----------| |---------------|
- * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '|Ret|Ret |F23| |Del|End|PgD| |F9 |F10|F11|F12|
- * |---------------------------------------------------------------| |-----------| |---------------|
- * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shf|Shift |F24| | |PgU| | |F13|F14|F15|F16|
- * |---------------------------------------------------------------| |-----------| |---------------|
- * |Fn0 |Gui|Alt | Space |Alt* |Gui|Fn0 | |Hom|PgD|End| |F17|F18|F19|F20|
- * `---------------------------------------------------------------' `-----------' `---------------'
- */
- KEYMAP_ALPS102(
- TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, VOLD,VOLU,MUTE, TRNS,TRNS,TRNS,TRNS, \
- TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, \
- TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, \
- TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,PGUP,TRNS, TRNS,TRNS,TRNS,TRNS, \
- TRNS,TRNS,TRNS, TRNS, TRNS,TRNS, TRNS, HOME,PGDN,END, TRNS,TRNS,TRNS,TRNS \
- ),
-};
-
-const uint16_t PROGMEM fn_actions[] = {
- [0] = ACTION_LAYER_MOMENTARY(1),
-};
diff --git a/converter/ibm4704_usb/keymap_common.c b/converter/ibm4704_usb/keymap_common.c
deleted file mode 100644
index 55a13793cb..0000000000
--- a/converter/ibm4704_usb/keymap_common.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
-Copyright 2011,2012,2013 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-#include "keymap_common.h"
-
-
-/* translates key to keycode */
-uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
-{
- return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
-}
-
-/* translates Fn keycode to action */
-action_t keymap_fn_to_action(uint8_t keycode)
-{
- return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) };
-}
diff --git a/converter/ibm4704_usb/keymap_common.h b/converter/ibm4704_usb/keymap_common.h
deleted file mode 100644
index 9cb23b0b83..0000000000
--- a/converter/ibm4704_usb/keymap_common.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
-Copyright 2011,2012,2013 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-#ifndef KEYMAP_COMMON_H
-#define KEYMAP_COMMON_H
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/pgmspace.h>
-#include "keycode.h"
-#include "action.h"
-#include "action_macro.h"
-#include "report.h"
-#include "print.h"
-#include "debug.h"
-#include "keymap.h"
-
-
-// 32*8(256) byte array which converts PS/2 code into USB code
-extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
-extern const uint16_t fn_actions[];
-
-
-/* 107-key */
-#define KEYMAP( \
- K46,K64, K00,K18,K19,K1A,K10,K11,K12,K08,K09,K0A,K0F,K1F,K0D,K0C,K0E, K6A,K6B,K6C, K47,K48,K49,K4A, \
- K56,K66, K04,K05,K06,K13,K14,K15,K16,K17,K01,K02,K03,K1B,K1C,K1D, K6D,K6E,K6F, K4B,K4C,K4D,K4E, \
- K71,K77, K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K2A,K2B,K2C,K2D, K70,K65,K72, K50,K51,K52,K53, \
- K44,K45, K30,K3E,K32,K33,K34,K35,K36,K37,K38,K39,K3A,K3B,K3C,K3D, K74,K75,K76, K5E,K58,K59,K5A, \
- K54,K55, K31,K41,K3F, K40, K42,K2F, K78,K67,K79, K5B,K5C,K5D,K57 \
-) { \
- { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_NO }, \
- { KC_##K08, KC_##K09, KC_##K0A, KC_NO, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \
- { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
- { KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_NO, KC_##K1F }, \
- { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
- { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_NO, KC_##K2F }, \
- { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \
- { KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F }, \
- { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \
- { KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_NO }, \
- { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
- { KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_NO }, \
- { KC_NO, KC_NO, KC_NO, KC_NO, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \
- { KC_NO, KC_NO, KC_##K6A, KC_##K6B, KC_##K6C, KC_##K6D, KC_##K6E, KC_##K6F }, \
- { KC_##K70, KC_##K71, KC_##K72, KC_NO, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \
- { KC_##K78, KC_##K79, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO } \
-}
-
-/* 77-key */
-#define KEYMAP_77( \
- K00,K18,K19,K1A,K10,K11,K12,K08,K09,K0A,K0F,K1F,K0D,K0C,K0E, K6A,K6B,K6C, \
- K04,K05,K06,K13,K14,K15,K16,K17,K01,K02,K03,K1B,K1C,K1D, K6D,K6E,K6F, \
- K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K2A,K2B,K2C,K2D, K70,K65,K72, \
- K30,K3E,K32,K33,K34,K35,K36,K37,K38,K39,K3A,K3B,K3C,K3D, K74,K75,K76, \
- K31,K41,K3F, K40, K42,K2F, K78,K67,K79 \
-) KEYMAP( \
- F1, F2, K00,K18,K19,K1A,K10,K11,K12,K08,K09,K0A,K0F,K1F,K0D,K0C,K0E, K6A,K6B,K6C, NLCK,PSLS,PAST,PMNS, \
- F3, F4, K04,K05,K06,K13,K14,K15,K16,K17,K01,K02,K03,K1B,K1C,K1D, K6D,K6E,K6F, P7, P8, P9, PPLS, \
- F5, F6, K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K2A,K2B,K2C,K2D, K70,K65,K72, P4, P5, P6, PPLS, \
- F7, F8, K30,K3E,K32,K33,K34,K35,K36,K37,K38,K39,K3A,K3B,K3C,K3D, K74,K75,K76, P1, P2, P3, PENT, \
- F9, F10, K31,K41,K3F, K40, K42,K2F, K78,K67,K79 P0, P0, PDOT,PENT \
-)
-
-/* 62-key */
-#define KEYMAP_62( \
- K00,K18,K19,K1A,K10,K11,K12,K08,K09,K0A,K0F,K1F,K0D,K0C,K0E, \
- K04,K05,K06,K13,K14,K15,K16,K17,K01,K02,K03,K1B,K1C,K1D, \
- K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K2A,K2B,K2C,K2D, \
- K30,K3E,K32,K33,K34,K35,K36,K37,K38,K39,K3A,K3B,K3C,K3D, \
- K31,K41,K3F, K40, K42,K2F \
-) KEYMAP( \
- F1, F2, K00,K18,K19,K1A,K10,K11,K12,K08,K09,K0A,K0F,K1F,K0D,K0C,K0E, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, \
- F3, F4, K04,K05,K06,K13,K14,K15,K16,K17,K01,K02,K03,K1B,K1C,K1D, DEL, END, PGDN, P7, P8, P9, PPLS, \
- F5, F6, K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K2A,K2B,K2C,K2D, PSCR,SLCK,PAUS, P4, P5, P6, PPLS, \
- F7, F8, K30,K3E,K32,K33,K34,K35,K36,K37,K38,K39,K3A,K3B,K3C,K3D, F11, UP, F12, P1, P2, P3, PENT, \
- F9, F10, K31,K41,K3F, K40, K42,K2F, LEFT,DOWN,RGHT, P0, P0, PDOT,PENT \
-)
-
-/* 50-key */
-#define KEYMAP_50( \
- K00,K01,K02, K03,K04,K05, K20,K21,K22,K23, \
- K08,K09,K0A, K0B,K0C,K0D, K28,K29,K2A,K35, \
- K10,K11,K12, K13,K14,K15, K30,K31,K32,K36, \
- K18,K19,K1A, K1B,K1C,K1D, K38,K39,K3A,K37, \
- K16,K1E,K0E, K0F,K1F,K17, K33,K3B,K2B,K3F \
-) { \
- { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_NO, KC_NO, }, \
- { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \
- { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
- { KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \
- { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_NO, KC_NO, KC_NO, KC_NO, }, \
- { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_NO, KC_NO, KC_NO, KC_NO, }, \
- { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_NO, KC_##K35, KC_##K36, KC_##K37 }, \
- { KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_NO, KC_NO, KC_NO, KC_##K3F }, \
- { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, }, \
- { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, }, \
- { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, }, \
- { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, }, \
- { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, }, \
- { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, }, \
- { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, }, \
- { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, } \
-}
-
-/* Alps 102-key */
-#define KEYMAP_ALPS102( \
- K00, K0F, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K44, K45, K46, K43, K41, K42, K4A, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K54, K55, K56, K50, K51, K52, K5A, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K64, K65, K66, K60, K61, K62, K6B, \
- K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K74, K75, K76, K70, K71, K72, K7B, \
- K31, K47, K3F, K40, K4F, K48, K2F, K77, K67, K57, K73, K63, K53, K4E \
-) { \
- { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
- { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \
- { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
- { KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_NO, }, \
- { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
- { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \
- { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \
- { KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F }, \
- { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \
- { KC_##K48, KC_NO, KC_##K4A, KC_NO, KC_NO, KC_NO, KC_##K4E, KC_##K4F }, \
- { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
- { KC_NO, KC_NO, KC_##K5A, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, }, \
- { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \
- { KC_NO, KC_NO, KC_NO, KC_##K6B, KC_NO, KC_NO, KC_NO, KC_NO, }, \
- { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \
- { KC_NO, KC_NO, KC_NO, KC_##K7B, KC_NO, KC_NO, KC_NO, KC_NO, } \
-}
-
-
-#endif
diff --git a/converter/ibm4704_usb/keymap_hasu.c b/converter/ibm4704_usb/keymap_hasu.c
deleted file mode 100644
index 14c171179c..0000000000
--- a/converter/ibm4704_usb/keymap_hasu.c
+++ /dev/null
@@ -1,85 +0,0 @@
-#include "keymap_common.h"
-
-
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* 0: default
- * ,-----------------------------------------------------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|???|BS |
- * |-----------------------------------------------------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
- * |-----------------------------------------------------------|
- * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '|xxx|Ret |
- * |-----------------------------------------------------------|
- * |Shif|xxx| Z| X| C| V| B| N| M| ,| ,| /|xxx|Shift |
- * |-----------------------------------------------------------|
- * |Ctrl |Gui|Alt | Space |Alt |Gui|Ctrl |
- * `-----------------------------------------------------------'
- */
- KEYMAP_62(
- ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,GRV, \
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSPC, \
- LCTL,A, S, D, F, G, H, J, K, L, FN1, QUOT,NO, ENT, \
- LSFT,NO, Z, X, C, V, B, N, M, COMM,DOT, FN2, NO, FN0, \
- LCTL,LGUI,LALT, FN3, RGUI,RCTL \
- ),
-
- KEYMAP_62(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
- CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,PAUS, UP, NO, BSPC, \
- LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,NO, ENT, \
- LSFT,NO, NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,NO, TRNS, \
- LCTL,LGUI,LALT, SPC, RGUI,RCTL \
- ),
-
- KEYMAP_62(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
- TAB, NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,WSTP,WBAK,WFWD,BSPC, \
- LCTL,NO, ACL0,ACL1,ACL2,NO, MS_L,MS_D,MS_U,MS_R,TRNS,NO, NO, ENT, \
- LSFT,NO, NO, NO, NO, NO, BTN3,BTN2,BTN1,BTN4,BTN5,NO, NO, RSFT,\
- LCTL,LGUI,LALT, BTN1, RGUI,RCTL \
- ),
-
- KEYMAP_62(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
- TAB, HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, BSPC, \
- LCTL,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, NO, ENT, \
- LSFT,NO, NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, TRNS,NO, RSFT, \
- LCTL,LGUI,LALT, SPC, RGUI,RCTL \
- ),
-
- KEYMAP_62(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
- TAB, NO, NO, NO, NO, NO, WH_L,WH_D,MS_U,WH_U,WH_R,BTN4,BTN5,FN4, \
- LCTL,VOLD,VOLU,MUTE,NO, NO, BTN2,MS_L,MS_D,MS_R,BTN1,NO, NO, ENT, \
- LSFT,NO, NO, NO, NO, NO, BTN3,BTN2,BTN1,BTN4,BTN5,NO, NO, NO, \
- LCTL,LGUI,LALT, TRNS, RGUI,RCTL \
- ),
-};
-
-enum macro_id {
- ALT_TAB,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
- [0] = ACTION_LAYER_MOMENTARY(1),
- [1] = ACTION_LAYER_TAP_KEY(2, KC_SCLN),
- [2] = ACTION_LAYER_TAP_KEY(3, KC_SLASH),
- [3] = ACTION_LAYER_TAP_KEY(4, KC_SPC),
- [4] = ACTION_MACRO(ALT_TAB),
-};
-
-/*
- * Macro definition
- */
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
- keyevent_t event = record->event;
-
- switch (id) {
- case ALT_TAB:
- return (event.pressed ?
- MACRO( D(LALT), D(TAB), END ) :
- MACRO( U(TAB), END ));
- }
- return MACRO_NONE;
-}
diff --git a/converter/ibm4704_usb/keymap_plain.c b/converter/ibm4704_usb/keymap_plain.c
deleted file mode 100644
index 4aed684e4c..0000000000
--- a/converter/ibm4704_usb/keymap_plain.c
+++ /dev/null
@@ -1,50 +0,0 @@
-#include "keymap_common.h"
-
-
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* 0: default
- * ,-----------------------------------------------------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|???|BS |
- * |-----------------------------------------------------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
- * |-----------------------------------------------------------|
- * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '|Ret|Ret |
- * |-----------------------------------------------------------|
- * |Shif|Shf| Z| X| C| V| B| N| M| ,| ,| /|???|Shift |
- * |-----------------------------------------------------------|
- * |Ctrl |Gui|Alt | Space |Alt* |Gui|Fn |
- * `-----------------------------------------------------------'
- */
- KEYMAP(
- F1, F2, GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, NO, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, \
- F3, F4, TA