summaryrefslogtreecommitdiffstats
path: root/converter/ascii_usb/README
diff options
context:
space:
mode:
Diffstat (limited to 'converter/ascii_usb/README')
-rw-r--r--converter/ascii_usb/README38
1 files changed, 38 insertions, 0 deletions
diff --git a/converter/ascii_usb/README b/converter/ascii_usb/README
new file mode 100644
index 0000000000..02fa064ed4
--- /dev/null
+++ b/converter/ascii_usb/README
@@ -0,0 +1,38 @@
+ASCII to USB keyboard protocol converter
+========================================
+This converts serial console terminal into USB keyboard, tested with TRS-80 model 100 TELCOM application.
+Target MCU is ATMega32u4 but other USB capable AVR will also work.
+
+
+Hardware
+--------
+Connect RX, TX and GND to UART pin of AVR. Note that you may need line driver/level shifter like MAX232 to interface high voltage of RS-232C.
+
+
+
+Build Firmware
+--------------
+Configure UART setting and Just use 'make'
+
+ $ cd ascii_usb
+ $ make
+
+Then, load the binary to MCU with your favorite programmer.
+
+
+
+Limitation
+----------
+- This cannot see key up event, you cannot hold a key.
+- Alt, Gui(Win/Mac) modifier key are not available.
+
+
+
+TRS-80 model 100
+----------------
+Use TELCOM program with setting: 19200bps/8bit/odd parity/1stop bit
+To set this configuration push Stat(F3) and input '9801D,10'. Then push Term(F4) to connect.
+
+
+
+