diff options
Diffstat (limited to 'builddefs')
| -rw-r--r-- | builddefs/bootloader.mk | 163 | ||||
| -rw-r--r-- | builddefs/disable_features.mk | 28 | ||||
| -rw-r--r-- | builddefs/generic_features.mk | 50 | ||||
| -rw-r--r-- | builddefs/mcu_selection.mk | 668 | ||||
| -rw-r--r-- | builddefs/message.mk | 102 | ||||
| -rw-r--r-- | builddefs/show_options.mk | 147 |
6 files changed, 1158 insertions, 0 deletions
diff --git a/builddefs/bootloader.mk b/builddefs/bootloader.mk new file mode 100644 index 0000000000..ccb92392d9 --- /dev/null +++ b/builddefs/bootloader.mk @@ -0,0 +1,163 @@ +# Copyright 2017 Jack Humbert +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# If it's possible that multiple bootloaders can be used for one project, +# you can leave this unset, and the correct size will be selected +# automatically. +# +# Sets the bootloader defined in the keyboard's/keymap's rules.mk +# Current options: +# +# AVR: +# halfkay PJRC Teensy +# caterina Pro Micro (Sparkfun/generic) +# atmel-dfu Atmel factory DFU +# lufa-dfu LUFA DFU +# qmk-dfu QMK DFU (LUFA + blinkenlight) +# qmk-hid QMK HID (LUFA + blinkenlight) +# bootloadhid HIDBootFlash compatible (ATmega32A) +# usbasploader USBaspLoader (ATmega328P) +# ARM: +# kiibohd Input:Club Kiibohd bootloader (only used on their boards) +# stm32duino STM32Duino (STM32F103x8) +# stm32-dfu STM32 USB DFU in ROM +# apm32-dfu APM32 USB DFU in ROM +# RISC-V: +# gd32v-dfu GD32V USB DFU in ROM +# +# BOOTLOADER_SIZE can still be defined manually, but it's recommended +# you add any possible configuration to this list + +ifeq ($(strip $(BOOTLOADER)), atmel-dfu) + OPT_DEFS += -DBOOTLOADER_ATMEL_DFU + OPT_DEFS += -DBOOTLOADER_DFU + ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647)) + BOOTLOADER_SIZE = 4096 + endif + ifneq (,$(filter $(MCU), at90usb1286 at90usb1287)) + BOOTLOADER_SIZE = 8192 + endif +endif +ifeq ($(strip $(BOOTLOADER)), lufa-dfu) + OPT_DEFS += -DBOOTLOADER_LUFA_DFU + OPT_DEFS += -DBOOTLOADER_DFU + ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647)) + BOOTLOADER_SIZE ?= 4096 + endif + ifneq (,$(filter $(MCU), at90usb1286 at90usb1287)) + BOOTLOADER_SIZE ?= 8192 + endif +endif +ifeq ($(strip $(BOOTLOADER)), qmk-dfu) + OPT_DEFS += -DBOOTLOADER_QMK_DFU + OPT_DEFS += -DBOOTLOADER_DFU + ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647)) + BOOTLOADER_SIZE ?= 4096 + endif + ifneq (,$(filter $(MCU), at90usb1286 at90usb1287)) + BOOTLOADER_SIZE ?= 8192 + endif +endif +ifeq ($(strip $(BOOTLOADER)), qmk-hid) + OPT_DEFS += -DBOOTLOADER_QMK_HID + OPT_DEFS += -DBOOTLOADER_HID + BOOTLOADER_SIZE ?= 4096 +endif +ifeq ($(strip $(BOOTLOADER)), halfkay) + OPT_DEFS += -DBOOTLOADER_HALFKAY + ifeq ($(strip $(MCU)), atmega32u4) + BOOTLOADER_SIZE = 512 + endif + ifeq ($(strip $(MCU)), at90usb1286) + BOOTLOADER_SIZE = 1024 + endif +endif +ifeq ($(strip $(BOOTLOADER)), caterina) + OPT_DEFS += -DBOOTLOADER_CATERINA + BOOTLOADER_SIZE = 4096 +endif +ifneq (,$(filter $(BOOTLOADER), bootloadhid bootloadHID)) + OPT_DEFS += -DBOOTLOADER_BOOTLOADHID + BOOTLOADER_SIZE = 4096 +endif +ifneq (,$(filter $(BOOTLOADER), usbasploader USBasp)) + OPT_DEFS += -DBOOTLOADER_USBASP + BOOTLOADER_SIZE = 4096 +endif +ifeq ($(strip $(BOOTLOADER)), lufa-ms) + OPT_DEFS += -DBOOTLOADER_MS + BOOTLOADER_SIZE ?= 8192 + FIRMWARE_FORMAT = bin +cpfirmware: lufa_warning +.INTERMEDIATE: lufa_warning +lufa_warning: $(FIRMWARE_FORMAT) + $(info @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@) + $(info LUFA MASS STORAGE Bootloader selected) + $(info DO NOT USE THIS BOOTLOADER IN NEW PROJECTS!) + $(info It is extremely prone to bricking, and is only included to support existing boards.) + $(info @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@) +endif +ifdef BOOTLOADER_SIZE + OPT_DEFS += -DBOOTLOADER_SIZE=$(strip $(BOOTLOADER_SIZE)) +endif + +ifeq ($(strip $(BOOTLOADER)), stm32-dfu) + OPT_DEFS += -DBOOTLOADER_STM32_DFU + + # Options to pass to dfu-util when flashing + DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave + DFU_SUFFIX_ARGS ?= -v 0483 -p DF11 +endif +ifeq ($(strip $(BOOTLOADER)), apm32-dfu) + OPT_DEFS += -DBOOTLOADER_APM32_DFU + + # Options to pass to dfu-util when flashing + DFU_ARGS ?= -d 314B:0106 -a 0 -s 0x08000000:leave + DFU_SUFFIX_ARGS ?= -v 314B -p 0106 +endif +ifeq ($(strip $(BOOTLOADER)), gd32v-dfu) + OPT_DEFS += -DBOOTLOADER_GD32V_DFU + + # Options to pass to dfu-util when flashing + DFU_ARGS ?= -d 28E9:0189 -a 0 -s 0x08000000:leave + DFU_SUFFIX_ARGS ?= -v 28E9 -p 0189 +endif +ifeq ($(strip $(BOOTLOADER)), kiibohd) + OPT_DEFS += -DBOOTLOADER_KIIBOHD + ifeq ($(strip $(MCU_ORIG)), MK20DX128) + MCU_LDSCRIPT = MK20DX128BLDR4 + endif + ifeq ($(strip $(MCU_ORIG)), MK20DX256) + MCU_LDSCRIPT = MK20DX256BLDR8 + endif + + # Options to pass to dfu-util when flashing + DFU_ARGS = -d 1C11:B007 + DFU_SUFFIX_ARGS = -v 1C11 -p B007 +endif +ifeq ($(strip $(BOOTLOADER)), stm32duino) + OPT_DEFS += -DBOOTLOADER_STM32DUINO + MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader + BOARD = STM32_F103_STM32DUINO + # STM32F103 does NOT have an USB bootloader in ROM (only serial), so setting anything here does not make much sense + STM32_BOOTLOADER_ADDRESS = 0x80000000 + + # Options to pass to dfu-util when flashing + DFU_ARGS = -d 1EAF:0003 -a 2 -R + DFU_SUFFIX_ARGS = -v 1EAF -p 0003 +endif +ifeq ($(strip $(BOOTLOADER)), tinyuf2) + OPT_DEFS += -DBOOTLOADER_TINYUF2 +endif diff --git a/builddefs/disable_features.mk b/builddefs/disable_features.mk new file mode 100644 index 0000000000..090a9b5a11 --- /dev/null +++ b/builddefs/disable_features.mk @@ -0,0 +1,28 @@ +# Unconditionally disable features that a keyboard advertises it doesn't support + +FEATURE_NAMES := +FEATURE_NAMES += AUDIO +FEATURE_NAMES += BACKLIGHT +FEATURE_NAMES += BLUETOOTH +FEATURE_NAMES += DIP_SWITCH +FEATURE_NAMES += DYNAMIC_KEYMAP +FEATURE_NAMES += ENCODER +FEATURE_NAMES += HAPTIC +FEATURE_NAMES += HD44780 +FEATURE_NAMES += IOS_DEVICE +FEATURE_NAMES += LCD_BACKLIGHT +FEATURE_NAMES += LCD +FEATURE_NAMES += OLED +FEATURE_NAMES += POINTING_DEVICE +FEATURE_NAMES += PRINTING +FEATURE_NAMES += PS2_MOUSE +FEATURE_NAMES += RGBLIGHT +FEATURE_NAMES += RGB_MATRIX +FEATURE_NAMES += SLEEP_LED +FEATURE_NAMES += STENO +FEATURE_NAMES += SWAP_HANDS +FEATURE_NAMES += WATCHDOG +FEATURE_NAMES += XT + +$(foreach AFEATURE,$(FEATURE_NAMES),\ + $(if $(filter $($(AFEATURE)_SUPPORTED),no),$(eval $(AFEATURE)_ENABLE=no))) diff --git a/builddefs/generic_features.mk b/builddefs/generic_features.mk new file mode 100644 index 0000000000..2281a82917 --- /dev/null +++ b/builddefs/generic_features.mk @@ -0,0 +1,50 @@ +# Copyright 2021 QMK +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +SPACE_CADET_ENABLE ?= yes +GRAVE_ESC_ENABLE ?= yes + +GENERIC_FEATURES = \ + COMBO \ + COMMAND \ + DIGITIZER \ + DIP_SWITCH \ + DYNAMIC_KEYMAP \ + DYNAMIC_MACRO \ + ENCODER \ + GRAVE_ESC \ + HAPTIC \ + KEY_LOCK \ + KEY_OVERRIDE \ + LEADER \ + PROGRAMMABLE_BUTTON \ + SPACE_CADET \ + SWAP_HANDS \ + TAP_DANCE \ + VELOCIKEY \ + WPM \ + +define HANDLE_GENERIC_FEATURE + # $$(info "Processing: $1_ENABLE $2.c") + SRC += $$(wildcard $$(QUANTUM_DIR)/process_keycode/process_$2.c) + SRC += $$(wildcard $$(QUANTUM_DIR)/$2.c) + OPT_DEFS += -D$1_ENABLE +endef + +$(foreach F,$(GENERIC_FEATURES),\ + $(if $(filter yes, $(strip $($(F)_ENABLE))),\ + $(eval $(call HANDLE_GENERIC_FEATURE,$(F),$(shell echo $(F) | tr '[:upper:]' '[:lower:]'))) \ + ) \ +) diff --git a/builddefs/mcu_selection.mk b/builddefs/mcu_selection.mk new file mode 100644 index 0000000000..1251b7a2b7 --- /dev/null +++ b/builddefs/mcu_selection.mk @@ -0,0 +1,668 @@ +MCU_ORIG := $(MCU) + +ifneq ($(findstring MKL26Z64, $(MCU)),) + # Cortex version + MCU = cortex-m0plus + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 6 + + ## chip/board settings + # - the next two should match the directories in + # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = KINETIS + MCU_SERIES = KL2x + + # Linker script to use + # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ + # or <keyboard_dir>/ld/ + MCU_LDSCRIPT ?= MKL26Z64 + + # Startup code to use + # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= kl2x + + # Board: it should exist either in <chibios>/os/hal/boards/, + # <keyboard_dir>/boards/, or drivers/boards/ + BOARD ?= PJRC_TEENSY_LC +endif + +ifneq ($(findstring MK20DX128, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = KINETIS + MCU_SERIES = K20x + + # Linker script to use + # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ + # or <keyboard_dir>/ld/ + MCU_LDSCRIPT ?= MK20DX128 + + # Startup code to use + # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= k20x5 + + # Board: it should exist either in <chibios>/os/hal/boards/, + # <keyboard_dir>/boards/, or drivers/boards/ + BOARD ?= PJRC_TEENSY_3 +endif + +ifneq ($(findstring MK20DX256, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = KINETIS + MCU_SERIES = K20x + + # Linker script to use + # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ + # or <keyboard_dir>/ld/ + MCU_LDSCRIPT ?= MK20DX256 + + # Startup code to use + # - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= k20x7 + + # Board: it should exist either in <chibios>/os/hal/boards/, + # <keyboard_dir>/boards/, or drivers/boards/ + BOARD ?= PJRC_TEENSY_3_1 +endif + +ifneq ($(findstring MK66FX1M0, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = KINETIS + MCU_SERIES = MK66F18 + + # Linker script to use + # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ + # or <keyboard_dir>/ld/ + MCU_LDSCRIPT ?= MK66FX1M0 + + # Startup code to use + # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= MK66F18 + + # Board: it should exist either in <chibios>/os/hal/boards/, + # <keyboard_dir>/boards/, or drivers/boards/ + BOARD ?= PJRC_TEENSY_3_6 +endif + +ifneq ($(findstring STM32F042, $(MCU)),) + # Cortex version + MCU = cortex-m0 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 6 + + ## chip/board settings + # - the next two should match the directories in + # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32F0xx + + # Linker script to use + # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ + # or <keyboard_dir>/ld/ + MCU_LDSCRIPT ?= STM32F042x6 + + # Startup code to use + # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32f0xx + + # Board: it should exist either in <chibios>/os/hal/boards/, + # <keyboard_dir>/boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_F042X6 + + USE_FPU ?= no + + # UF2 settings + UF2_FAMILY ?= STM32F0 + + # Stack sizes: Since this chip has limited RAM capacity, the stack area needs to be reduced. + # This ensures that the EEPROM page buffer fits into RAM + USE_PROCESS_STACKSIZE = 0x600 + USE_EXCEPTIONS_STACKSIZE = 0x300 +endif + +ifneq ($(findstring STM32F072, $(MCU)),) + # Cortex version + MCU = cortex-m0 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 6 + + ## chip/board settings + # - the next two should match the directories in + # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32F0xx + + # Linker script to use + # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ + # or <keyboard_dir>/ld/ + MCU_LDSCRIPT ?= STM32F072xB + + # Startup code to use + # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32f0xx + + # Board: it should exist either in <chibios>/os/hal/boards/, + # <keyboard_dir>/boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_F072XB + + USE_FPU ?= no + + # UF2 settings + UF2_FAMILY ?= STM32F0 +endif + +ifneq ($(findstring STM32F103, $(MCU)),) + # Cortex version + MCU = cortex-m3 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32F1xx + + # Linker script to use + # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ + # or <keyboard_dir>/ld/ + MCU_LDSCRIPT ?= STM32F103x8 + + # Startup code to use + # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32f1xx + + # Board: it should exist either in <chibios>/os/hal/boards/, + # <keyboard_dir>/boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_F103 + + USE_FPU ?= no + + # UF2 settings + UF2_FAMILY ?= STM32F1 +endif + +ifneq ($(findstring STM32F303, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32F3xx + + # Linker script to use + # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ + # or <keyboard_dir>/ld/ + MCU_LDSCRIPT ?= STM32F303xC + + # Startup code to use + # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32f3xx + + # Board: it should exist either in <chibios>/os/hal/boards/, + # <keyboard_dir>/boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_F303XC + + USE_FPU ?= yes + + # UF2 settings + UF2_FAMILY ?= STM32F3 +endif + +ifneq ($(findstring STM32F401, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32F4xx + + # Linker script to use + # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ + # or <keyboard_dir>/ld/ + ifeq ($(strip $(BOOTLOADER)), tinyuf2) + MCU_LDSCRIPT ?= STM32F401xC_tinyuf2 + FIRMWARE_FORMAT ?= uf2 + else + MCU_LDSCRIPT ?= STM32F401xC + endif + + # Startup code to use + # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32f4xx + + # Board: it should exist either in <chibios>/os/hal/boards/, + # <keyboard_dir>/boards/, or drivers/boards/ + BOARD ?= BLACKPILL_STM32_F401 + + USE_FPU ?= yes + + # UF2 settings + UF2_FAMILY ?= STM32F4 +endif + +ifneq ($(findstring STM32F405, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32F4xx + + # Linker script to use + # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ + # or <keyboard_dir>/ld/ + MCU_LDSCRIPT ?= STM32F405xG + + # Startup code to use + # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32f4xx + + # Board: it should exist either in <chibios>/os/hal/boards/, + # <keyboard_dir>/boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_F405XG + + USE_FPU ?= yes + + # UF2 settings + UF2_FAMILY ?= STM32F4 +endif + +ifneq ($(findstring STM32F407, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32F4xx + + # Linker script to use + # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ + # or <keyboard_dir>/ld/ + MCU_LDSCRIPT ?= STM32F407xE + + # Startup code to use + # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32f4xx + + # Board: it should exist either in <chibios>/os/hal/boards/, + # <keyboard_dir>/boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_F407XE + + USE_FPU ?= yes + + # UF2 settings + UF2_FAMILY ?= STM32F4 +endif + +ifneq ($(findstring STM32F411, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32F4xx + + # Linker script to use + # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ + # or <keyboard_dir>/ld/ + ifeq ($(strip $(BOOTLOADER)), tinyuf2) + MCU_LDSCRIPT ?= STM32F411xE_tinyuf2 + FIRMWARE_FORMAT ?= uf2 + else + MCU_LDSCRIPT ?= STM32F411xE + endif + + # Startup code to use + # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32f4xx + + # Board: it should exist either in <chibios>/os/hal/boards/, + # <keyboard_dir>/boards/, or drivers/boards/ + BOARD ?= BLACKPILL_STM32_F411 + + USE_FPU ?= yes + + # UF2 settings + UF2_FAMILY ?= STM32F4 +endif + +ifneq ($(findstring STM32F446, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32F4xx + + # Linker script to use + # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ + # or <keyboard_dir>/ld/ + MCU_LDSCRIPT ?= STM32F446xE + + # Startup code to use + # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32f4xx + + # Board: it should exist either in <chibios>/os/hal/boards/, + # <keyboard_dir>/boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_F446XE + + USE_FPU ?= yes +endif + +ifneq ($(findstring STM32G431, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32G4xx + + # Linker script to use + # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ + # or <keyboard_dir>/ld/ + MCU_LDSCRIPT ?= STM32G431xB + + # Startup code to use + # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32g4xx + + # Board: it should exist either in <chibios>/os/hal/boards/, + # <keyboard_dir>/boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_G431XB + + USE_FPU ?= yes + + # UF2 settings + UF2_FAMILY ?= STM32G4 +endif + +ifneq ($(findstring STM32G474, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32G4xx + + # Linker script to use + # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ + # or <keyboard_dir>/ld/ + MCU_LDSCRIPT ?= STM32G474xE + + # Startup code to use + # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32g4xx + + # Board: it should exist either in <chibios>/os/hal/boards/, + # <keyboard_dir>/boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_G474XE + + USE_FPU ?= yes + + # UF2 settings + UF2_FAMILY ?= STM32G4 +endif + +ifneq (,$(filter $(MCU),STM32L433 STM32L443)) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32L4xx + + # Linker script to use + # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ + # or <keyboard_dir>/ld/ + MCU_LDSCRIPT ?= STM32L432xC + + # Startup code to use + # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32l4xx + + # Board: it should exist either in <chibios>/os/hal/boards/, + # <keyboard_dir>/boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_L433XC + + PLATFORM_NAME ?= platform_l432 + + USE_FPU ?= yes + + # UF2 settings + UF2_FAMILY ?= STM32L4 +endif + +ifneq (,$(filter $(MCU),STM32L412 STM32L422)) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32L4xx + + # Linker script to use + # - it should exist either in <chibios>/os/common/startup/ARMCMx/compilers/GCC/ld/ + # or <keyboard_dir>/ld/ + MCU_LDSCRIPT ?= STM32L412xB + + # Startup code to use + # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32l4xx + + # Board: it should exist either in <chibios>/os/hal/boards/, + # <keyboard_dir>/boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_L412XB + + PLATFORM_NAME ?= platform_l432 + + USE_FPU ?= yes + + # UF2 settings + UF2_FAMILY ?= STM32L4 +endif + +ifneq ($(findstring GD32VF103, $(MCU)),) + # RISC-V + MCU = risc-v + + # RISC-V extensions and abi configuration + MCU_ARCH = rv32imac + MCU_ABI = ilp32 + MCU_CMODEL = medlow + + ## chip/board settings + # - the next two should match the directories in + # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = GD32V + MCU_SERIES = GD32VF103 + + # Linker script to use + # - it should exist either in <chibios>/os/common/startup/RISCV-ECLIC/compilers/GCC/ld/ + # or <keyboard_dir>/ld/ + MCU_LDSCRIPT ?= GD32VF103xB + + # Startup code to use + # - it should exist in <chibios>/os/common/startup/RISCV-ECLIC/compilers/GCC/mk/ + MCU_STARTUP ?= gd32vf103 + + # Board: it should exist either in <chibios>/os/hal/boards/, + # <keyboard_dir>/boards/, or drivers/boards/ + BOARD ?= SIPEED_LONGAN_NANO + + USE_FPU ?= no +endif + +ifneq (,$(filter $(MCU),at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647 at90usb1286 at90usb1287)) + PROTOCOL = LUFA + + # Processor frequency. + # This will define a symbol, F_CPU, in all source code files equal to the + # processor frequency in Hz. You can then use this symbol in your source code to + # calculate timings. Do NOT tack on a 'UL' at the end, this will be done + # automatically to create a 32-bit value in your source code. + # + # This will be an integer division of F_USB below, as it is sourced by + # F_USB after it has run through any CPU prescalers. Note that this value + # does not *change* the processor frequency - it should merely be updated to + # reflect the processor speed set externally so that the code can use accurate + # software delays. + F_CPU ?= 16000000 + + # LUFA specific + # + # Target architecture (see library "Board Types" documentation). + ARCH = AVR8 + + # Input clock frequency. + # This will define a symbol, F_USB, in all source code files equal to the + # input clock frequency (before any prescaling is performed) in Hz. This value may + # differ from F_CPU if prescaling is used on the latter, and is required as the + # raw input clock is fed directly to the PLL sections of the AVR for high speed + # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' + # at the end, this will be done automatically to create a 32-bit value in your + # source code. + # + # If no clock division is performed on the input clock inside the AVR (via the + # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. + F_USB ?= $(F_CPU) + + # Interrupt driven control endpoint task + ifeq (,$(filter $(NO_INTERRUPT_CONTROL_ENDPOINT),yes)) + OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + endif + ifneq (,$(filter $(MCU),at90usb162 atmega16u2 atmega32u2)) + NO_I2C = yes + endif +endif + +ifneq (,$(filter $(MCU),atmega32a)) + # MCU name for avrdude + AVRDUDE_MCU = m32 + + PROTOCOL = VUSB + + # Processor frequency. + # This will define a symbol, F_CPU, in all source code files equal to the + # processor frequency in Hz. You can then use this symbol in your source code to + # calculate timings. Do NOT tack on a 'UL' at the end, this will be done + # automatically to create a 32-bit value in your source code. + F_CPU ?= 12000000 +endif + +ifneq (,$(filter $(MCU),atmega328p)) + # MCU name for avrdude + AVRDUDE_MCU = m328p + + PROTOCOL = VUSB + + # Processor frequency. + # This will define a symbol, F_CPU, in all source code files equal to the + # processor frequency in Hz. You can then use this symbol in your source code to + # calculate timings. Do NOT tack on a 'UL' at the end, this will be done + # automatically to create a 32-bit value in your source code. + F_CPU ?= 16000000 +endif + +ifneq (,$(filter $(MCU),atmega328)) + # MCU name for avrdude + AVRDUDE_MCU = m328 + + PROTOCOL = VUSB + + # Processor frequency. + # This will define a symbol, F_CPU, in all source code files equal to the + # processor frequency in Hz. You can then use this symbol in your source code to + # calculate timings. Do NOT tack on a 'UL' at the end, this will be done + # automatically to create a 32-bit value in your source code. + F_CPU ?= 16000000 +endif + +ifneq (,$(filter $(MCU),attiny85)) + PROTOCOL = VUSB + + # Processor frequency. + # This will define a symbol, F_CPU, in all source code files equal to the + # processor frequency in Hz. You can then use this symbol in your source code to + # calculate timings. Do NOT tack on a 'UL' at the end, this will be done + # automatically to create a 32-bit value in your source code. + F_CPU ?= 16500000 +endif diff --git a/builddefs/message.mk b/builddefs/message.mk new file mode 100644 index 0000000000..cb4ef43719 --- /dev/null +++ b/builddefs/message.mk @@ -0,0 +1,102 @@ +COLOR ?= true + +ifeq ($(COLOR),true) + NO_COLOR=\033[0m + OK_COLOR=\033[32;01m + ERROR_COLOR=\033[31;01m + WARN_COLOR=\033[33;01m + SKIPPED_COLOR=\033[36;01m + BLUE=\033[0;34m + BOLD=\033[1m +endif + +ifneq ($(shell echo "1 2 3" | awk '{ printf "%2s", $$3; }' 2>/dev/null)," 3") + AWK=awk +else + AWK=cat && test +endif + +ON_ERROR ?= exit 1 + +OK_STRING=$(OK_COLOR)[OK]$(NO_COLOR)\n +ERROR_STRING=$(ERROR_COLOR)[ERRORS]$(NO_COLOR)\n +WARN_STRING=$(WARN_COLOR)[WARNINGS]$(NO_COLOR)\n +SKIPPED_STRING=$(SKIPPED_COLOR)[SKIPPED]$(NO_COLOR)\n + +TAB_LOG = printf "\n%s\n\n" "$$LOG" | $(AWK) '{ sub(/^/," | "); print }' +TAB_LOG_PLAIN = printf "%s\n" "$$LOG" +AWK_STATUS = $(AWK) '{ printf " %-10s\n", $$1; }' +AWK_CMD = $(AWK) '{ printf "%-99s", $$0; }' +PRINT_ERROR = ($(SILENT) ||printf " $(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG) && $(ON_ERROR) +PRINT_WARNING = ($(SILENT) || printf " $(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG) +PRINT_ERROR_PLAIN = ($(SILENT) ||printf " $(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN) && $(ON_ERROR) +PRINT_WARNING_PLAIN = ($(SILENT) || printf " $(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN) +PRINT_SKIPPED_PLAIN = ($(SILENT) || printf " $(SKIPPED_STRING)" | $(AWK_STATUS)) +PRINT_OK = $(SILENT) || printf " $(OK_STRING)" | $(AWK_STATUS) +BUILD_CMD = LOG=$$($(CMD) 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING); else $(PRINT_OK); fi; +MAKE_MSG_FORMAT = $(AWK) '{ printf "%-118s", $$0;}' + +# The UNSYNC_OUTPUT_CMD command disables the `--output-sync` for the current command, if the `--output-sync` granularity is `target` or lower. +# This is achieved by telling make to treat the current command as if it invokes a recursive make subcommand (as if by calling `$(MAKE)`). +UNSYNC_OUTPUT_CMD = +true + +# Define Messages +# English +MSG_ERRORS_NONE = Errors: none +MSG_ERRORS = $(ERROR_COLOR)Make finished with errors\n$(NO_COLOR) +MSG_BEGIN = -------- begin -------- +MSG_END = -------- end -------- +MSG_SIZE_BEFORE = Size before: +MSG_SIZE_AFTER = Size after: +MSG_COFF = Converting to AVR COFF: +MSG_EXTENDED_COFF = Converting to AVR Extended COFF: +MSG_FLASH = Creating load file for flashing: +MSG_UF2 = Creating UF2 file for deployment: +MSG_EEPROM = Creating load file for EEPROM: +MSG_BIN = Creating binary load file for flashing: +MSG_EXTENDED_LISTING = Creating Extended Listing: +MSG_SYMBOL_TABLE = Creating Symbol Table: +MSG_EXECUTING = Executing: +MSG_LINKING = Linking: +MSG_COMPILING = Compiling: +MSG_COMPILING_CXX = Compiling: +MSG_ASSEMBLING = Assembling: +MSG_CLEANING = Cleaning project: +MSG_CREATING_LIBRARY = Creating library: +MSG_SUBMODULE_DIRTY = $(WARN_COLOR)WARNING:$(NO_COLOR) Some git submodules are out of date or modified.\n\ +Please consider running $(BOLD)make git-submodule$(NO_COLOR).\n\n +MSG_NO_CMP = $(ERROR_COLOR)Error:$(NO_COLOR)$(BOLD) cmp command not found, please install diffutils\n$(NO_COLOR) + +define GENERATE_MSG_MAKE_KB + MSG_MAKE_KB_ACTUAL := Making $$(KB_SP) with keymap $(BOLD)$$(CURRENT_KM)$(NO_COLOR) + ifneq ($$(MAKE_TARGET),) + MSG_MAKE_KB_ACTUAL += and target $(BOLD)$$(MAKE_TARGET)$(NO_COLOR) + endif +endef +MSG_MAKE_KB = $(eval $(call GENERATE_MSG_MAKE_KB))$(MSG_MAKE_KB_ACTUAL) +define GENERATE_MSG_MAKE_TEST + MSG_MAKE_TEST_ACTUAL := Making test $(BOLD)$(TEST_NAME)$(NO_COLOR) + ifneq ($$(MAKE_TARGET),) + MSG_MAKE_TEST_ACTUAL += with target $(BOLD)$$(MAKE_TARGET)$(NO_COLOR) + endif +endef +MSG_MAKE_TEST = $(eval $(call GENERATE_MSG_MAKE_TEST))$(MSG_MAKE_TEST_ACTUAL) +MSG_TEST = Testing $(BOLD)$(TEST_NAME)$(NO_COLOR) +define GENERATE_MSG_AVAILABLE_KEYMAPS + MSG_AVAILABLE_KEYMAPS_ACTUAL := Available keymaps for $(BOLD)$$(CURRENT_KB)$(NO_COLOR): +endef +MSG_AVAILABLE_KEYMAPS = $(eval $(call GENERATE_MSG_AVAILABLE_KEYMAPS))$(MSG_AVAILABLE_KEYMAPS_ACTUAL) + +MSG_CHECK_FILESIZE = Checking file size of $(TARGET).$(FIRMWARE_FORMAT) +MSG_CHECK_FILESIZE_SKIPPED = (Firmware size check does not yet support $(MCU_ORIG); skipping) +MSG_FILE_TOO_BIG = $(ERROR_COLOR)The firmware is too large!$(NO_COLOR) $(CURRENT_SIZE)/$(MAX_SIZE) ($(OVER_SIZE) bytes over)\n +MSG_FILE_TOO_SMALL = The firmware is too small! $(CURRENT_SIZE)/$(MAX_SIZE)\n +MSG_FILE_JUST_RIGHT = The firmware size is fine - $(CURRENT_SIZE)/$(MAX_SIZE) ($(PERCENT_SIZE)%%, $(FREE_SIZE) bytes free)\n +MSG_FILE_NEAR_LIMIT = The firmware size is approaching the maximum - $(CURRENT_SIZE)/$(MAX_SIZE) ($(PERCENT_SIZE)%%, $(FREE_SIZE) bytes free)\n +MSG_PYTHON_MISSING = $(ERROR_COLOR)ERROR:$(NO_COLOR) Cannot run \"qmk hello\"!\n\n\ + Please run $(BOLD)qmk setup$(NO_COLOR) to install all the dependencies QMK requires.\n\n +MSG_FLASH_BOOTLOADER = $(WARN_COLOR)WARNING:$(NO_COLOR) This board's bootloader is not specified or is not supported by the \":flash\" target at this time.\n\n +MSG_FLASH_ARCH = $(WARN_COLOR)WARNING:$(NO_COLOR) This board's architecture is not supported by the \":flash\" target at this time.\n\n +MSG_BOOTLOADER_NOT_FOUND = $(ERROR_COLOR)ERROR:$(NO_COLOR) Bootloader not found. Trying again in 5s (Ctrl+C to cancel)\n +BOOTLOADER_RETRY_TIME ?= 0.5 +MSG_BOOTLOADER_NOT_FOUND_QUICK_RETRY = Bootloader not found. Trying again every $(BOOTLOADER_RETRY_TIME)s (Ctrl+C to cancel) diff --git a/builddefs/show_options.mk b/builddefs/show_options.mk new file mode 100644 index 000000 |