diff options
Diffstat (limited to 'builddefs')
| -rw-r--r-- | builddefs/bootloader.mk | 4 | ||||
| -rw-r--r-- | builddefs/build_keyboard.mk | 16 | ||||
| -rw-r--r-- | builddefs/build_test.mk | 2 | ||||
| -rw-r--r-- | builddefs/common_features.mk | 11 | ||||
| -rw-r--r-- | builddefs/common_rules.mk | 6 | ||||
| -rw-r--r-- | builddefs/converters.mk | 37 | ||||
| -rw-r--r-- | builddefs/generic_features.mk | 3 | ||||
| -rw-r--r-- | builddefs/mcu_selection.mk | 118 | ||||
| -rw-r--r-- | builddefs/show_options.mk | 5 | ||||
| -rw-r--r-- | builddefs/testlist.mk | 1 |
10 files changed, 167 insertions, 36 deletions
diff --git a/builddefs/bootloader.mk b/builddefs/bootloader.mk index 1a53bfa663..eba8e280e4 100644 --- a/builddefs/bootloader.mk +++ b/builddefs/bootloader.mk @@ -208,6 +208,10 @@ ifeq ($(strip $(BOOTLOADER)), md-boot) OPT_DEFS += -DBOOTLOADER_MD_BOOT BOOTLOADER_TYPE = md_boot endif +ifeq ($(strip $(BOOTLOADER)), wb32-dfu) + OPT_DEFS += -DBOOTLOADER_WB32_DFU + BOOTLOADER_TYPE = wb32_dfu +endif ifeq ($(strip $(BOOTLOADER_TYPE)),) $(call CATASTROPHIC_ERROR,Invalid BOOTLOADER,No bootloader specified. Please set an appropriate 'BOOTLOADER' in your keyboard's 'rules.mk' file.) diff --git a/builddefs/build_keyboard.mk b/builddefs/build_keyboard.mk index 44acd964cc..dc86b232df 100644 --- a/builddefs/build_keyboard.mk +++ b/builddefs/build_keyboard.mk @@ -172,13 +172,7 @@ generated-files: $(KEYMAP_OUTPUT)/src/config.h $(KEYMAP_OUTPUT)/src/keymap.c endif -ifeq ($(strip $(CTPC)), yes) - CONVERT_TO_PROTON_C=yes -endif - -ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes) - include platforms/chibios/boards/QMK_PROTON_C/convert_to_proton_c.mk -endif +include $(BUILDDEFS_PATH)/converters.mk include $(BUILDDEFS_PATH)/mcu_selection.mk @@ -328,12 +322,18 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_5)/info.json)","") endif CONFIG_H += $(KEYBOARD_OUTPUT)/src/info_config.h $(KEYBOARD_OUTPUT)/src/layouts.h +KEYBOARD_SRC += $(KEYBOARD_OUTPUT)/src/default_keyboard.c $(KEYBOARD_OUTPUT)/src/info_config.h: $(INFO_JSON_FILES) @$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD) $(eval CMD=$(QMK_BIN) generate-config-h --quiet --keyboard $(KEYBOARD) --output $(KEYBOARD_OUTPUT)/src/info_config.h) @$(BUILD_CMD) +$(KEYBOARD_OUTPUT)/src/default_keyboard.c: $(INFO_JSON_FILES) + @$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD) + $(eval CMD=$(QMK_BIN) generate-keyboard-c --quiet --keyboard $(KEYBOARD) --output $(KEYBOARD_OUTPUT)/src/default_keyboard.c) + @$(BUILD_CMD) + $(KEYBOARD_OUTPUT)/src/default_keyboard.h: $(INFO_JSON_FILES) @$(SILENT) || printf "$(MSG_GENERATING) $@" | $(AWK_CMD) $(eval CMD=$(QMK_BIN) generate-keyboard-h --quiet --keyboard $(KEYBOARD) --output $(KEYBOARD_OUTPUT)/src/default_keyboard.h) @@ -344,7 +344,7 @@ $(KEYBOARD_OUTPUT)/src/layouts.h: $(INFO_JSON_FILES) $(eval CMD=$(QMK_BIN) generate-layouts --quiet --keyboard $(KEYBOARD) --output $(KEYBOARD_OUTPUT)/src/layouts.h) @$(BUILD_CMD) -generated-files: $(KEYBOARD_OUTPUT)/src/info_config.h $(KEYBOARD_OUTPUT)/src/default_keyboard.h $(KEYBOARD_OUTPUT)/src/layouts.h +generated-files: $(KEYBOARD_OUTPUT)/src/info_config.h $(KEYBOARD_OUTPUT)/src/default_keyboard.c $(KEYBOARD_OUTPUT)/src/default_keyboard.h $(KEYBOARD_OUTPUT)/src/layouts.h .INTERMEDIATE : generated-files diff --git a/builddefs/build_test.mk b/builddefs/build_test.mk index 7226004aab..5ad33b19c5 100644 --- a/builddefs/build_test.mk +++ b/builddefs/build_test.mk @@ -4,6 +4,8 @@ endif .DEFAULT_GOAL := all +OPT = g + include paths.mk include $(BUILDDEFS_PATH)/message.mk diff --git a/builddefs/common_features.mk b/builddefs/common_features.mk index 08d186d656..c976b8296d 100644 --- a/builddefs/common_features.mk +++ b/builddefs/common_features.mk @@ -149,6 +149,11 @@ ifeq ($(strip $(POINTING_DEVICE_ENABLE)), yes) endif endif +QUANTUM_PAINTER_ENABLE ?= no +ifeq ($(strip $(QUANTUM_PAINTER_ENABLE)), yes) + include $(QUANTUM_DIR)/painter/rules.mk +endif + VALID_EEPROM_DRIVER_TYPES := vendor custom transient i2c spi EEPROM_DRIVER ?= vendor ifeq ($(filter $(EEPROM_DRIVER),$(VALID_EEPROM_DRIVER_TYPES)),) @@ -646,8 +651,9 @@ ifeq ($(strip $(HAPTIC_ENABLE)),yes) endif ifeq ($(strip $(HD44780_ENABLE)), yes) - SRC += platforms/avr/drivers/hd44780.c OPT_DEFS += -DHD44780_ENABLE + COMMON_VPATH += $(DRIVER_PATH)/lcd + SRC += hd44780.c endif VALID_OLED_DRIVER_TYPES := SSD1306 custom @@ -695,7 +701,8 @@ endif ifeq ($(strip $(UNICODE_COMMON)), yes) OPT_DEFS += -DUNICODE_COMMON_ENABLE - SRC += $(QUANTUM_DIR)/process_keycode/process_unicode_common.c + SRC += $(QUANTUM_DIR)/process_keycode/process_unicode_common.c \ + $(QUANTUM_DIR)/utf8.c endif MAGIC_ENABLE ?= yes diff --git a/builddefs/common_rules.mk b/builddefs/common_rules.mk index b303a87919..d3acddc87b 100644 --- a/builddefs/common_rules.mk +++ b/builddefs/common_rules.mk @@ -82,8 +82,8 @@ endif # -Wall...: warning level # -Wa,...: tell GCC to pass this to the assembler. ifeq ($(strip $(LTO_ENABLE)), yes) - ifeq ($(PLATFORM),CHIBIOS) - $(info Enabling LTO on ChibiOS-targeting boards is known to have a high likelihood of failure.) + ifeq ($(PLATFORM),ARM_ATSAM) + $(info Enabling LTO on arm_atsam-targeting boards is known to have a high likelihood of failure.) $(info If unsure, set LTO_ENABLE = no.) endif CDEFS += -flto @@ -316,7 +316,7 @@ gccversion : @$(BUILD_CMD) %.uf2: %.hex - $(eval CMD=$(UF2CONV) $(BUILD_DIR)/$(TARGET).hex -o $(BUILD_DIR)/$(TARGET).uf2 -c -f $(UF2_FAMILY) >/dev/null 2>&1) + $(eval CMD=$(UF2CONV) $(BUILD_DIR)/$(TARGET).hex --output $(BUILD_DIR)/$(TARGET).uf2 --convert --family $(UF2_FAMILY) >/dev/null 2>&1) #@$(SILENT) || printf "$(MSG_EXECUTING) '$(CMD)':\n" @$(SILENT) || printf "$(MSG_UF2) $@" | $(AWK_CMD) @$(BUILD_CMD) diff --git a/builddefs/converters.mk b/builddefs/converters.mk new file mode 100644 index 0000000000..b3e7bec007 --- /dev/null +++ b/builddefs/converters.mk @@ -0,0 +1,37 @@ +# Note for new boards -- CTPC and CONVERT_TO_PROTON_C are deprecated terms +# and should not be replicated for new boards. These will be removed from +# documentation as well as existing keymaps in due course. +ifeq ($(strip $(CTPC)), yes) + CONVERT_TO_PROTON_C=yes +endif +ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes) + CONVERT_TO=proton_c + +cpfirmware: ctpc_warning +.INTERMEDIATE: ctpc_warning +ctpc_warning: elf + $(info @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@) + $(info The `CONVERT_TO_PROTON_C` and `CTPC` options are soon to be deprecated.) + $(info Boards should be changed to use `CONVERT_TO=proton_c` instead.) + $(info @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@) +endif + +# TODO: opt in rather than assume everything uses a pro micro +PIN_COMPATIBLE ?= promicro +ifneq ($(CONVERT_TO),) + # glob to search each platfrorm and/or check for valid converter + CONVERTER := $(wildcard $(PLATFORM_PATH)/*/converters/$(PIN_COMPATIBLE)_to_$(CONVERT_TO)/) + ifeq ($(CONVERTER),) + $(call CATASTROPHIC_ERROR,Converting from '$(PIN_COMPATIBLE)' to '$(CONVERT_TO)' not possible!) + endif + + TARGET := $(TARGET)_$(CONVERT_TO) + + # Configure any defaults + OPT_DEFS += -DCONVERT_TO_$(strip $(shell echo $(CONVERT_TO) | tr '[:lower:]' '[:upper:]')) + OPT_DEFS += -DCONVERTER_ENABLED + VPATH += $(CONVERTER) + + # Finally run any converter specific logic + include $(CONVERTER)/converter.mk +endif diff --git a/builddefs/generic_features.mk b/builddefs/generic_features.mk index e4151eb217..c3f1ec0f72 100644 --- a/builddefs/generic_features.mk +++ b/builddefs/generic_features.mk @@ -17,6 +17,7 @@ SPACE_CADET_ENABLE ?= yes GRAVE_ESC_ENABLE ?= yes GENERIC_FEATURES = \ + CAPS_WORD \ COMBO \ COMMAND \ DEFERRED_EXEC \ @@ -25,12 +26,14 @@ GENERIC_FEATURES = \ DYNAMIC_KEYMAP \ DYNAMIC_MACRO \ ENCODER \ + ENCODER_MAP \ GRAVE_ESC \ HAPTIC \ KEY_LOCK \ KEY_OVERRIDE \ LEADER \ PROGRAMMABLE_BUTTON \ + SECURE \ SPACE_CADET \ SWAP_HANDS \ TAP_DANCE \ diff --git a/builddefs/mcu_selection.mk b/builddefs/mcu_selection.mk index 9fdd22c3b6..d5fb731e08 100644 --- a/builddefs/mcu_selection.mk +++ b/builddefs/mcu_selection.mk @@ -9,7 +9,9 @@ ifneq ($(findstring MKL26Z64, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = KINETIS MCU_SERIES = KL2x @@ -36,7 +38,9 @@ ifneq ($(findstring MK20DX128, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = KINETIS MCU_SERIES = K20x @@ -63,7 +67,9 @@ ifneq ($(findstring MK20DX256, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = KINETIS MCU_SERIES = K20x @@ -90,7 +96,9 @@ ifneq ($(findstring MK66FX1M0, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = KINETIS MCU_SERIES = MK66F18 @@ -117,7 +125,9 @@ ifneq ($(findstring STM32F042, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32F0xx @@ -157,7 +167,9 @@ ifneq ($(findstring STM32F072, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32F0xx @@ -192,7 +204,9 @@ ifneq ($(findstring STM32F103, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32F1xx @@ -224,7 +238,9 @@ ifneq ($(findstring STM32F303, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32F3xx @@ -259,7 +275,9 @@ ifneq ($(findstring STM32F401, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32F4xx @@ -299,7 +317,9 @@ ifneq ($(findstring STM32F405, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32F4xx @@ -334,7 +354,9 @@ ifneq ($(findstring STM32F407, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32F4xx @@ -369,7 +391,9 @@ ifneq ($(findstring STM32F411, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32F4xx @@ -409,7 +433,9 @@ ifneq ($(findstring STM32F446, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32F4xx @@ -441,7 +467,9 @@ ifneq ($(findstring STM32G431, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32G4xx @@ -476,7 +504,9 @@ ifneq ($(findstring STM32G474, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32G4xx @@ -511,7 +541,9 @@ ifneq (,$(filter $(MCU),STM32L432 STM32L442)) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32L4xx @@ -548,7 +580,9 @@ ifneq (,$(filter $(MCU),STM32L433 STM32L443)) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32L4xx @@ -585,7 +619,9 @@ ifneq (,$(filter $(MCU),STM32L412 STM32L422)) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = STM32 MCU_SERIES = STM32L4xx @@ -602,7 +638,7 @@ ifneq (,$(filter $(MCU),STM32L412 STM32L422)) # <keyboard_dir>/boards/, or drivers/boards/ BOARD ?= GENERIC_STM32_L412XB - PLATFORM_NAME ?= platform_l432 + PLATFORM_NAME ?= platform_l412_l422 USE_FPU ?= yes @@ -622,7 +658,9 @@ ifneq ($(findstring WB32F3G71, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) MCU_FAMILY = WB32 MCU_SERIES = WB32F3G71xx @@ -642,7 +680,40 @@ ifneq ($(findstring WB32F3G71, $(MCU)),) USE_FPU ?= no # Bootloader address for WB32 DFU - STM32_BOOTLOADER_ADDRESS ?= 0x1FFFE000 + WB32_BOOTLOADER_ADDRESS ?= 0x1FFFE000 +endif + +ifneq ($(findstring WB32FQ95, $(MCU)),) + # Cortex version + MCU = cortex-m3 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = WB32 + MCU_SERIES = WB32FQ95xx + + # Linker script to use + # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ + # or <keyboard_dir>/ld/ + MCU_LDSCRIPT ?= WB32FQ95xB + + # Startup code to use + # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= wb32fq95xx + + # Board: it should exist either in <chibios>/os/hal/boards/, + # <keyboard_dir>/boards/, or drivers/boards/ + BOARD ?= GENERIC_WB32_FQ95XX + + USE_FPU ?= no + + # Bootloader address for WB32 DFU WB32_BOOTLOADER_ADDRESS ?= 0x1FFFE000 endif @@ -657,7 +728,10 @@ ifneq ($(findstring GD32VF103, $(MCU)),) ## chip/board settings # - the next two should match the directories in - # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + # <chibios[-contrib]>/os/hal/ports/$(MCU_PORT_NAME)/$(MCU_SERIES) + # OR + # <chibios[-contrib]>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_PORT_NAME = GD MCU_FAMILY = GD32V MCU_SERIES = GD32VF103 diff --git a/builddefs/show_options.mk b/builddefs/show_options.mk index 2820332d56..f67d009191 100644 --- a/builddefs/show_options.mk +++ b/builddefs/show_options.mk @@ -57,6 +57,7 @@ OTHER_OPTION_NAMES = \ HELIX ZINC \ AUTOLOG_ENABLE \ DEBUG_ENABLE \ + ENCODER_MAP_ENABLE \ ENCODER_ENABLE_CUSTOM \ GERMAN_ENABLE \ HAPTIC_ENABLE \ @@ -79,7 +80,9 @@ OTHER_OPTION_NAMES = \ LED_MIRRORED \ RGBLIGHT_FULL_POWER \ LTO_ENABLE \ - PROGRAMMABLE_BUTTON_ENABLE + PROGRAMMABLE_BUTTON_ENABLE \ + SECURE_ENABLE \ + CAPS_WORD_ENABLE define NAME_ECHO @printf " %-30s = %-16s # %s\\n" "$1" "$($1)" "$(origin $1)" diff --git a/builddefs/testlist.mk b/builddefs/testlist.mk index 86da5668ac..b8d22bce80 100644 --- a/builddefs/testlist.mk +++ b/builddefs/testlist.mk @@ -2,6 +2,7 @@ TEST_LIST = $(sort $(patsubst %/test.mk,%, $(shell find $(ROOT_DIR)tests -type f FULL_TESTS := $(notdir $(TEST_LIST)) include $(QUANTUM_PATH)/debounce/tests/testlist.mk +include $(QUANTUM_PATH)/encoder/tests/testlist.mk include $(QUANTUM_PATH)/sequencer/tests/testlist.mk include $(PLATFORM_PATH)/test/testlist.mk |