diff options
Diffstat (limited to 'builddefs/common_rules.mk')
| -rw-r--r-- | builddefs/common_rules.mk | 523 |
1 files changed, 523 insertions, 0 deletions
diff --git a/builddefs/common_rules.mk b/builddefs/common_rules.mk new file mode 100644 index 0000000000..b303a87919 --- /dev/null +++ b/builddefs/common_rules.mk @@ -0,0 +1,523 @@ +# Hey Emacs, this is a -*- makefile -*- +#---------------------------------------------------------------------------- +# WinAVR Makefile Template written by Eric B. Weddington, Jg Wunsch, et al. +# +# Released to the Public Domain +# +# Additional material for this makefile was written by: +# Peter Fleury +# Tim Henigan +# Colin O'Flynn +# Reiner Patommel +# Markus Pfaff +# Sander Pool +# Frederik Rouleau +# Carlos Lamas +# + +# Enable vpath seraching for source files only +# Without this, output files, could be read from the wrong .build directories +VPATH_SRC := $(VPATH) +vpath %.c $(VPATH_SRC) +vpath %.h $(VPATH_SRC) +vpath %.cpp $(VPATH_SRC) +vpath %.cc $(VPATH_SRC) +vpath %.hpp $(VPATH_SRC) +vpath %.S $(VPATH_SRC) +VPATH := + +# Convert all SRC to OBJ +define OBJ_FROM_SRC +$(patsubst %.c,$1/%.o,$(patsubst %.cpp,$1/%.o,$(patsubst %.cc,$1/%.o,$(patsubst %.S,$1/%.o,$(patsubst %.clib,$1/%.a,$($1_SRC)))))) +endef +$(foreach OUTPUT,$(OUTPUTS),$(eval $(OUTPUT)_OBJ +=$(call OBJ_FROM_SRC,$(OUTPUT)))) + +# Define a list of all objects +OBJ := $(foreach OUTPUT,$(OUTPUTS),$($(OUTPUT)_OBJ)) +NO_LTO_OBJ := $(filter %.a,$(OBJ)) + +MASTER_OUTPUT := $(firstword $(OUTPUTS)) + + + +# Output format. (can be srec, ihex, binary) +FORMAT = ihex + +# Optimization level, can be [0, 1, 2, 3, s]. +# 0 = turn off optimization. s = optimize for size. +# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) +OPT ?= s + +# Compiler flag to set the C Standard level. +# c89 = "ANSI" C +# gnu89 = c89 plus GCC extensions +# c99 = ISO C99 standard (not yet fully implemented) +# gnu99 = c99 plus GCC extensions +CSTANDARD = -std=gnu99 + + +# Place -D or -U options here for C sources +#CDEFS += + + +# Place -D or -U options here for ASM sources +#ADEFS += + + +# Place -D or -U options here for C++ sources +#CXXDEFS += -D__STDC_LIMIT_MACROS +#CXXDEFS += -D__STDC_CONSTANT_MACROS +#CXXDEFS += + +# Speed up recompilations by opt-in usage of ccache +USE_CCACHE ?= no +ifneq ($(USE_CCACHE),no) + CC_PREFIX ?= ccache +endif + +#---------------- Compiler Options C ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +ifeq ($(strip $(LTO_ENABLE)), yes) + ifeq ($(PLATFORM),CHIBIOS) + $(info Enabling LTO on ChibiOS-targeting boards is known to have a high likelihood of failure.) + $(info If unsure, set LTO_ENABLE = no.) + endif + CDEFS += -flto + CDEFS += -DLTO_ENABLE +endif + +DEBUG_ENABLE ?= yes +ifeq ($(strip $(SKIP_DEBUG_INFO)),yes) + DEBUG_ENABLE=no +endif + +ifeq ($(strip $(DEBUG_ENABLE)),yes) + CFLAGS += -g$(DEBUG) +endif +CFLAGS += $(CDEFS) +CFLAGS += -O$(OPT) +# add color +ifeq ($(COLOR),true) +ifeq ("$(shell echo "int main(){}" | $(CC) -fdiagnostics-color -x c - -o /dev/null 2>&1)", "") + CFLAGS+= -fdiagnostics-color +endif +endif +CFLAGS += -Wall +CFLAGS += -Wstrict-prototypes +ifneq ($(strip $(ALLOW_WARNINGS)), yes) + CFLAGS += -Werror +endif +#CFLAGS += -mshort-calls +#CFLAGS += -fno-unit-at-a-time +#CFLAGS += -Wundef +#CFLAGS += -Wunreachable-code +#CFLAGS += -Wsign-compare +CFLAGS += $(CSTANDARD) + +# This fixes lots of keyboards linking errors but SHOULDN'T BE A FINAL SOLUTION +# Fixing of multiple variable definitions must be made. +CFLAGS += -fcommon + +#---------------- Compiler Options C++ ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +ifeq ($(strip $(DEBUG_ENABLE)),yes) + CXXFLAGS += -g$(DEBUG) +endif +CXXFLAGS += $(CXXDEFS) +CXXFLAGS += -O$(OPT) +# to supress "warning: only initialized variables can be placed into program memory area" +CXXFLAGS += -w +CXXFLAGS += -Wall +CXXFLAGS += -Wundef + +ifneq ($(strip $(ALLOW_WARNINGS)), yes) + CXXFLAGS += -Werror +endif +#CXXFLAGS += -mshort-calls +#CXXFLAGS += -fno-unit-at-a-time +#CXXFLAGS += -Wstrict-prototypes +#CXXFLAGS += -Wunreachable-code +#CXXFLAGS += -Wsign-compare +#CXXFLAGS += $(CSTANDARD) + +#---------------- Assembler Options ---------------- +ASFLAGS += $(ADEFS) +ifeq ($(VERBOSE_AS_CMD),yes) + ASFLAGS += -v +endif + +#---------------- Library Options ---------------- +# Minimalistic printf version +PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min + +# Floating point printf version (requires MATH_LIB = -lm below) +PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt + +# If this is left blank, then it will use the Standard printf version. +PRINTF_LIB = +#PRINTF_LIB = $(PRINTF_LIB_MIN) +#PRINTF_LIB = $(PRINTF_LIB_FLOAT) + + +# Minimalistic scanf version +SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min + +# Floating point + %[ scanf version (requires MATH_LIB = -lm below) +SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt + +# If this is left blank, then it will use the Standard scanf version. +SCANF_LIB = +#SCANF_LIB = $(SCANF_LIB_MIN) +#SCANF_LIB = $(SCANF_LIB_FLOAT) + + +MATH_LIB = -lm +CREATE_MAP ?= yes + + +#---------------- Linker Options ---------------- +# -Wl,...: tell GCC to pass this to linker. +# -Map: create map file +# --cref: add cross reference to map file +# +# Comennt out "--relax" option to avoid a error such: +# (.vectors+0x30): relocation truncated to fit: R_AVR_13_PCREL against symbol `__vector_12' +# + +ifeq ($(CREATE_MAP),yes) + LDFLAGS += -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref +endif +ifeq ($(VERBOSE_LD_CMD),yes) + LDFLAGS += -v +endif +#LDFLAGS += -Wl,--relax +LDFLAGS += $(EXTMEMOPTS) +LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) +LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) +#LDFLAGS += -T linker_script.x +# You can give EXTRALDFLAGS at 'make' command line. +LDFLAGS += $(EXTRALDFLAGS) + +#---------------- Assembler Listings ---------------- +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns: create listing +# -gstabs: have the assembler create line number information; note that +# for use in COFF files, additional information about filenames +# and function names needs to be present in the assembler source +# files -- see avr-libc docs [FIXME: not yet described there] +# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# dump that will be displayed for a given single line of source input. + +ADHLNS_ENABLE ?= no +ifeq ($(ADHLNS_ENABLE),yes) + # Avoid "Options to '-Xassembler' do not match" - only specify assembler options at LTO link time + ifeq ($(strip $(LTO_ENABLE)), yes) + LDFLAGS += -Wa,-adhlns=$(BUILD_DIR)/$(TARGET).lst + else + CFLAGS += -Wa,-adhlns=$(@:%.o=%.lst) + CXXFLAGS += -Wa,-adhlns=$(@:%.o=%.lst) + ifeq ($(strip $(DEBUG_ENABLE)),yes) + ASFLAGS = -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100 + else + ASFLAGS = -Wa,-adhlns=$(@:%.o=%.lst),--listing-cont-lines=100 + endif + endif +endif + +# Define programs and commands. +SHELL = sh +SED = sed +REMOVE = rm -f +REMOVEDIR = rmdir +COPY = cp +WINSHELL = cmd +SECHO = $(SILENT) || echo +MD5SUM ?= md5sum +ifneq ($(filter Darwin FreeBSD,$(shell uname -s)),) + MD5SUM = md5 +endif + +# UF2 format settings +# To produce a UF2 file in your build, add to your keyboard's rules.mk: +# FIRMWARE_FORMAT = uf2 +UF2CONV = $(TOP_DIR)/util/uf2conv.py +UF2_FAMILY ?= 0x0 + +# Compiler flags to generate dependency files. +#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d +GENDEPFLAGS = -MMD -MP -MF $(patsubst %.o,%.td,$@) + + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +# You can give extra flags at 'make' command line like: make EXTRAFLAGS=-DFOO=bar +ALL_CFLAGS = $(MCUFLAGS) $(CFLAGS) $(EXTRAFLAGS) +ALL_CXXFLAGS = $(MCUFLAGS) -x c++ $(CXXFLAGS) $(EXTRAFLAGS) +ALL_ASFLAGS = $(MCUFLAGS) -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS) + +define NO_LTO +$(patsubst %.a,%.o,$1): NOLTO_CFLAGS += -fno-lto +endef +$(foreach LOBJ, $(NO_LTO_OBJ), $(eval $(call NO_LTO,$(LOBJ)))) + +MOVE_DEP = mv -f $(patsubst %.o,%.td,$@) $(patsubst %.o,%.d,$@) + +# For a ChibiOS build, ensure that the board files have the hook overrides injected +define BOARDSRC_INJECT_HOOKS +$(KEYBOARD_OUTPUT)/$(patsubst %.c,%.o,$(patsubst ./%,%,$1)): INIT_HOOK_CFLAGS += -include $(TOP_DIR)/tmk_core/protocol/chibios/init_hooks.h +endef +$(foreach LOBJ, $(BOARDSRC), $(eval $(call BOARDSRC_INJECT_HOOKS,$(LOBJ)))) + +# Add QMK specific flags +DFU_SUFFIX ?= dfu-suffix +DFU_SUFFIX_ARGS ?= + + +elf: $(BUILD_DIR)/$(TARGET).elf +hex: $(BUILD_DIR)/$(TARGET).hex +uf2: $(BUILD_DIR)/$(TARGET).uf2 +cpfirmware: $(FIRMWARE_FORMAT) + $(SILENT) || printf "Copying $(TARGET).$(FIRMWARE_FORMAT) to qmk_firmware folder" | $(AWK_CMD) + $(COPY) $(BUILD_DIR)/$(TARGET).$(FIRMWARE_FORMAT) $(TARGET).$(FIRMWARE_FORMAT) && $(PRINT_OK) +eep: $(BUILD_DIR)/$(TARGET).eep +lss: $(BUILD_DIR)/$(TARGET).lss +sym: $(BUILD_DIR)/$(TARGET).sym +LIBNAME=lib$(TARGET).a +lib: $(LIBNAME) + +# Display size of file, modifying the output so people don't mistakenly grab the hex output +BINARY_SIZE = $(SIZE) --target=$(FORMAT) $(BUILD_DIR)/$(TARGET).hex | $(SED) -e 's/\.build\/.*$$/$(TARGET).$(FIRMWARE_FORMAT)/g' + +sizebefore: + @if test -f $(BUILD_DIR)/$(TARGET).hex; then $(SECHO) $(MSG_SIZE_BEFORE); $(SILENT) || $(BINARY_SIZE); \ + 2>/dev/null; $(SECHO); fi + +sizeafter: $(BUILD_DIR)/$(TARGET).hex + @if test -f $(BUILD_DIR)/$(TARGET).hex; then $(SECHO); $(SECHO) $(MSG_SIZE_AFTER); $(SILENT) || $(BINARY_SIZE); \ + 2>/dev/null; $(SECHO); fi + +# Display compiler version information. +gccversion : + @$(SILENT) || $(CC) --version + +# Create final output files (.hex, .eep) from ELF output file. +%.hex: %.elf + $(eval CMD=$(HEX) $< $@) + #@$(SILENT) || printf "$(MSG_EXECUTING) '$(CMD)':\n" + @$(SILENT) || printf "$(MSG_FLASH) $@" | $(AWK_CMD) + @$(BUILD_CMD) + +%.uf2: %.hex + $(eval CMD=$(UF2CONV) $(BUILD_DIR)/$(TARGET).hex -o $(BUILD_DIR)/$(TARGET).uf2 -c -f $(UF2_FAMILY) >/dev/null 2>&1) + #@$(SILENT) || printf "$(MSG_EXECUTING) '$(CMD)':\n" + @$(SILENT) || printf "$(MSG_UF2) $@" | $(AWK_CMD) + @$(BUILD_CMD) + +%.eep: %.elf + $(eval CMD=$(EEP) $< $@ || exit 0) + #@$(SILENT) || printf "$(MSG_EXECUTING) '$(CMD)':\n" + @$(SILENT) || printf "$(MSG_EEPROM) $@" | $(AWK_CMD) + @$(BUILD_CMD) + +# Create extended listing file from ELF output file. +%.lss: %.elf + $(eval CMD=$(OBJDUMP) -h -S -z $< > $@) + #@$(SILENT) || printf "$(MSG_EXECUTING) '$(CMD)':\n" + @$(SILENT) || printf "$(MSG_EXTENDED_LISTING) $@" | $(AWK_CMD) + @$(BUILD_CMD) + +# Create a symbol table from ELF output file. +%.sym: %.elf + $(eval CMD=$(NM) -n $< > $@ ) + #@$(SILENT) || printf "$(MSG_EXECUTING) '$(CMD)':\n" + @$(SILENT) || printf "$(MSG_SYMBOL_TABLE) $@" | $(AWK_CMD) + @$(BUILD_CMD) + +%.bin: %.elf + $(eval CMD=$(BIN) $< $@ || exit 0) + #@$(SILENT) || printf "$(MSG_EXECUTING) '$(CMD)':\n" + @$(SILENT) || printf "$(MSG_BIN) $@" | $(AWK_CMD) + @$(BUILD_CMD) + if [ ! -z "$(DFU_SUFFIX_ARGS)" ]; then \ + $(DFU_SUFFIX) $(DFU_SUFFIX_ARGS) -a $(BUILD_DIR)/$(TARGET).bin 1>/dev/null ;\ + fi + #$(SILENT) || printf "$(MSG_EXECUTING) '$(DFU_SUFFIX) $(DFU_SUFFIX_ARGS) -a $(BUILD_DIR)/$(TARGET).bin 1>/dev/null':\n" ;\ + $(COPY) $(BUILD_DIR)/$(TARGET).bin $(TARGET).bin; + +BEGIN = gccversion sizebefore + +# Link: create ELF output file from object files. +.SECONDARY : $(BUILD_DIR)/$(TARGET).elf +.PRECIOUS : $(OBJ) +# Note the obj.txt depeendency is there to force linking if a source file is deleted +%.elf: $(OBJ) $(MASTER_OUTPUT)/cflags.txt $(MASTER_OUTPUT)/ldflags.txt $(MASTER_OUTPUT)/obj.txt | $(BEGIN) + @$(SILENT) || printf "$(MSG_LINKING) $@" | $(AWK_CMD) + $(eval CMD=MAKE=$(MAKE) $(CC) $(ALL_CFLAGS) $(filter-out %.txt,$^) --output $@ $(LDFLAGS)) + @$(BUILD_CMD) + + +define GEN_OBJRULE +$1_INCFLAGS := $$(patsubst %,-I%,$$($1_INC)) +ifdef $1_CONFIG +$1_CONFIG_FLAGS += $$(patsubst %,-include %,$$($1_CONFIG)) +endif +$1_CFLAGS = $$(ALL_CFLAGS) $$($1_DEFS) $$($1_INCFLAGS) $$($1_CONFIG_FLAGS) $$(NOLTO_CFLAGS) +$1_CXXFLAGS = $$(ALL_CXXFLAGS) $$($1_DEFS) $$($1_INCFLAGS) $$($1_CONFIG_FLAGS) $$(NOLTO_CFLAGS) +$1_ASFLAGS = $$(ALL_ASFLAGS) $$($1_DEFS) $$($1_INCFLAGS) $$($1_CONFIG_FLAGS) + +# Compile: create object files from C source files. +$1/%.o : %.c $1/%.d $1/cflags.txt $1/compiler.txt | $(BEGIN) + @mkdir -p $$(@D) + @$$(SILENT) || printf "$$(MSG_COMPILING) $$<" | $$(AWK_CMD) + $$(eval CC_EXEC := $$(CC)) + ifneq ($$(VERBOSE_C_CMD),) + $$(if $$(filter $$(notdir $$(VERBOSE_C_CMD)),$$(notdir $$<)),$$(eval CC_EXEC += -v)) + endif + ifneq ($$(VERBOSE_C_INCLUDE),) + $$(if $$(filter $$(notdir $$(VERBOSE_C_INCLUDE)),$$(notdir $$<)),$$(eval CC_EXEC += -H)) + endif + $$(eval CMD := $$(CC_EXEC) -c $$($1_CFLAGS) $$(INIT_HOOK_CFLAGS) $$(GENDEPFLAGS) $$< -o $$@ && $$(MOVE_DEP)) + @$$(BUILD_CMD) + ifneq ($$(DUMP_C_MACROS),) + $$(eval CMD := $$(CC) -E -dM $$($1_CFLAGS) $$(INIT_HOOK_CFLAGS) $$(GENDEPFLAGS) $$<) + @$$(if $$(filter $$(notdir $$(DUMP_C_MACROS)),$$(notdir $$<)),$$(BUILD_CMD)) + endif + +# Compile: create object files from C++ source files. +$1/%.o : %.cpp $1/%.d $1/cxxflags.txt $1/compiler.txt | $(BEGIN) + @mkdir -p $$(@D) + @$$(SILENT) || printf "$$(MSG_COMPILING_CXX) $$<" | $$(AWK_CMD) + $$(eval CMD=$$(CC) -c $$($1_CXXFLAGS) $$(INIT_HOOK_CFLAGS) $$(GENDEPFLAGS) $$< -o $$@ && $$(MOVE_DEP)) + @$$(BUILD_CMD) + +$1/%.o : %.cc $1/%.d $1/cxxflags.txt $1/compiler.txt | $(BEGIN) + @mkdir -p $$(@D) + @$$(SILENT) || printf "$$(MSG_COMPILING_CXX) $$<" | $$(AWK_CMD) + $$(eval CMD=$$(CC) -c $$($1_CXXFLAGS) $$(INIT_HOOK_CFLAGS) $$(GENDEPFLAGS) $$< -o $$@ && $$(MOVE_DEP)) + @$$(BUILD_CMD) + +# Assemble: create object files from assembler source files. +$1/%.o : %.S $1/asflags.txt $1/compiler.txt | $(BEGIN) + @mkdir -p $$(@D) + @$(SILENT) || printf "$$(MSG_ASSEMBLING) $$<" | $$(AWK_CMD) + $$(eval CMD=$$(CC) -c $$($1_ASFLAGS) $$< -o $$@) + @$$(BUILD_CMD) + +$1/%.a : $1/%.o + @mkdir -p $$(@D) + @$(SILENT) || printf "Archiving: $$<" | $$(AWK_CMD) + $$(eval CMD=$$(AR) rcs $$@ $$<) + @$$(BUILD_CMD) + +$1/force: + +$1/cflags.txt: $1/force + echo '$$($1_CFLAGS)' | cmp -s - $$@ || echo '$$($1_CFLAGS)' > $$@ + +$1/cxxflags.txt: $1/force + echo '$$($1_CXXFLAGS)' | cmp -s - $$@ || echo '$$($1_CXXFLAGS)' > $$@ + +$1/asflags.txt: $1/force + echo '$$($1_ASFLAGS)' | cmp -s - $$@ || echo '$$($1_ASFLAGS)' > $$@ + +$1/compiler.txt: $1/force + $$(CC) --version | cmp -s - $$@ || $$(CC) --version > $$@ +endef + +.PRECIOUS: $(MASTER_OUTPUT)/obj.txt +$(MASTER_OUTPUT)/obj.txt: $(MASTER_OUTPUT)/force + echo '$(OBJ)' | cmp -s - $@ || echo '$(OBJ)' > $@ + +.PRECIOUS: $(MASTER_OUTPUT)/ldflags.txt +$(MASTER_OUTPUT)/ldflags.txt: $(MASTER_OUTPUT)/force + echo '$(LDFLAGS)' | cmp -s - $@ || echo '$(LDFLAGS)' > $@ + + +# We have to use static rules for the .d files for some reason +DEPS = $(patsubst %.o,%.d,$(patsubst %.a,%.o,$(OBJ))) +# Keep the .d files +.PRECIOUS: $(DEPS) +# Empty rule to force recompilation if the .d file is missing +$(DEPS): + + +$(foreach OUTPUT,$(OUTPUTS),$(eval $(call GEN_OBJRULE,$(OUTPUT)))) + +# Create preprocessed source for use in sending a bug report. +%.i : %.c | $(BEGIN) + $(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@ + +# Target: clean project. +clean: + $(foreach OUTPUT,$(OUTPUTS), $(REMOVE) -r $(OUTPUT) 2>/dev/null) + $(REMOVE) $(BUILD_DIR)/$(TARGET).* + +show_path: + @echo VPATH=$(VPATH) + @echo SRC=$(SRC) + @echo OBJ=$(OBJ) + +dump_vars: ERROR_IF_EMPTY="" +dump_vars: ERROR_IF_NONBOOL="" +dump_vars: ERROR_IF_UNSET="" +dump_vars: + @$(foreach V,$(sort $(.VARIABLES)),$(if $(filter-out environment% default automatic,$(origin $V)),$(info $V=$($V)))) + +objs-size: + for i in $(OBJ); do echo $$i; done | sort | xargs $(SIZE) + +ifeq ($(findstring avr-gcc,$(CC)),avr-gcc) +SIZE_MARGIN = 1024 + +check-size: + $(eval MAX_SIZE=$(shell n=`$(CC) -E -mmcu=$(MCU) -D__ASSEMBLER__ $(CFLAGS) $(OPT_DEFS) platforms/avr/bootloader_size.c 2> /dev/null | $(SED) -ne 's/\r//;/^#/n;/^AVR_SIZE:/,$${s/^AVR_SIZE: //;p;}'` && echo $$(($$n)) || echo 0)) + $(eval CURRENT_SIZE=$(shell if [ -f $(BUILD_DIR)/$(TARGET).hex ]; then $(SIZE) --target=$(FORMAT) $(BUILD_DIR)/$(TARGET).hex | $(AWK) 'NR==2 {print $$4}'; else printf 0; fi)) + $(eval FREE_SIZE=$(shell expr $(MAX_SIZE) - $(CURRENT_SIZE))) + $(eval OVER_SIZE=$(shell expr $(CURRENT_SIZE) - $(MAX_SIZE))) + $(eval PERCENT_SIZE=$(shell expr $(CURRENT_SIZE) \* 100 / $(MAX_SIZE))) + if [ $(MAX_SIZE) -gt 0 ] && [ $(CURRENT_SIZE) -gt 0 ]; then \ + $(SILENT) || printf "$(MSG_CHECK_FILESIZE)" | $(AWK_CMD); \ + if [ $(CURRENT_SIZE) -gt $(MAX_SIZE) ]; then \ + printf "\n * $(MSG_FILE_TOO_BIG)"; $(PRINT_ERROR_PLAIN); \ + else \ + if [ $(FREE_SIZE) -lt $(SIZE_MARGIN) ]; then \ + $(PRINT_WARNING_PLAIN); printf " * $(MSG_FILE_NEAR_LIMIT)"; \ + else \ + $(PRINT_OK); $(SILENT) || printf " * $(MSG_FILE_JUST_RIGHT)"; \ + fi ; \ + fi ; \ + fi +else +check-size: + $(SILENT) || echo "$(MSG_CHECK_FILESIZE_SKIPPED)" +endif + +check-md5: + $(MD5SUM) $(BUILD_DIR)/$(TARGET).$(FIRMWARE_FORMAT) + +# Create build directory +$(shell mkdir -p $(BUILD_DIR) 2>/dev/null) + +# Create object files directory +$(eval $(foreach OUTPUT,$(OUTPUTS),$(shell mkdir -p $(OUTPUT) 2>/dev/null))) + +# Include the dependency files. +-include $(patsubst %.o,%.d,$(patsubst %.a,%.o,$(OBJ))) + + +# Listing of phony targets. +.PHONY : all dump_vars finish sizebefore sizeafter qmkversion \ +gccversion build elf hex uf2 eep lss sym coff extcoff \ +clean clean_list debug gdb-config show_path \ +program teensy dfu dfu-ee dfu-start \ +flash dfu-split-left dfu-split-right \ +avrdude-split-left avrdude-split-right \ +avrdude-loop usbasp |