diff options
Diffstat (limited to 'build_keyboard.mk')
| -rw-r--r-- | build_keyboard.mk | 456 |
1 files changed, 0 insertions, 456 deletions
diff --git a/build_keyboard.mk b/build_keyboard.mk deleted file mode 100644 index 6473e3e473..0000000000 --- a/build_keyboard.mk +++ /dev/null @@ -1,456 +0,0 @@ -# Determine what keyboard we are building and setup the build environment. -# -# We support folders up to 5 levels deep below `keyboards/`. This file is -# responsible for determining which folder is being used and doing the -# corresponding environment setup. - -ifndef VERBOSE -.SILENT: -endif - -.DEFAULT_GOAL := all - -include paths.mk -include $(BUILDDEFS_PATH)/message.mk - -# Set the qmk cli to use -QMK_BIN ?= qmk - -# Set the filename for the final firmware binary -KEYBOARD_FILESAFE := $(subst /,_,$(KEYBOARD)) -TARGET ?= $(KEYBOARD_FILESAFE)_$(KEYMAP) -KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD_FILESAFE) - -# Force expansion -TARGET := $(TARGET) - -ifneq ($(FORCE_LAYOUT),) - TARGET := $(TARGET)_$(FORCE_LAYOUT) -endif - -# Object files and generated keymap directory -# To put object files in current directory, use a dot (.), do NOT make -# this an empty or blank macro! -KEYMAP_OUTPUT := $(BUILD_DIR)/obj_$(TARGET) - -ifdef SKIP_VERSION - OPT_DEFS += -DSKIP_VERSION -endif - -# Determine which subfolders exist. -KEYBOARD_FOLDER_PATH_1 := $(KEYBOARD) -KEYBOARD_FOLDER_PATH_2 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_1))) -KEYBOARD_FOLDER_PATH_3 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_2))) -KEYBOARD_FOLDER_PATH_4 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_3))) -KEYBOARD_FOLDER_PATH_5 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_4))) -KEYBOARD_FOLDER_1 := $(notdir $(KEYBOARD_FOLDER_PATH_1)) -KEYBOARD_FOLDER_2 := $(notdir $(KEYBOARD_FOLDER_PATH_2)) -KEYBOARD_FOLDER_3 := $(notdir $(KEYBOARD_FOLDER_PATH_3)) -KEYBOARD_FOLDER_4 := $(notdir $(KEYBOARD_FOLDER_PATH_4)) -KEYBOARD_FOLDER_5 := $(notdir $(KEYBOARD_FOLDER_PATH_5)) -KEYBOARD_PATHS := -KEYBOARD_PATH_1 := keyboards/$(KEYBOARD_FOLDER_PATH_1) -KEYBOARD_PATH_2 := keyboards/$(KEYBOARD_FOLDER_PATH_2) -KEYBOARD_PATH_3 := keyboards/$(KEYBOARD_FOLDER_PATH_3) -KEYBOARD_PATH_4 := keyboards/$(KEYBOARD_FOLDER_PATH_4) -KEYBOARD_PATH_5 := keyboards/$(KEYBOARD_FOLDER_PATH_5) - -ifneq ("$(wildcard $(KEYBOARD_PATH_5)/)","") - KEYBOARD_PATHS += $(KEYBOARD_PATH_5) -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_4)/)","") - KEYBOARD_PATHS += $(KEYBOARD_PATH_4) -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_3)/)","") - KEYBOARD_PATHS += $(KEYBOARD_PATH_3) -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_2)/)","") - KEYBOARD_PATHS += $(KEYBOARD_PATH_2) -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_1)/)","") - KEYBOARD_PATHS += $(KEYBOARD_PATH_1) -endif - - -# Pull in rules.mk files from all our subfolders -ifneq ("$(wildcard $(KEYBOARD_PATH_5)/rules.mk)","") - include $(KEYBOARD_PATH_5)/rules.mk -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_4)/rules.mk)","") - include $(KEYBOARD_PATH_4)/rules.mk -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_3)/rules.mk)","") - include $(KEYBOARD_PATH_3)/rules.mk -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_2)/rules.mk)","") - include $(KEYBOARD_PATH_2)/rules.mk -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_1)/rules.mk)","") - include $(KEYBOARD_PATH_1)/rules.mk -endif - -MAIN_KEYMAP_PATH_1 := $(KEYBOARD_PATH_1)/keymaps/$(KEYMAP) -MAIN_KEYMAP_PATH_2 := $(KEYBOARD_PATH_2)/keymaps/$(KEYMAP) -MAIN_KEYMAP_PATH_3 := $(KEYBOARD_PATH_3)/keymaps/$(KEYMAP) -MAIN_KEYMAP_PATH_4 := $(KEYBOARD_PATH_4)/keymaps/$(KEYMAP) -MAIN_KEYMAP_PATH_5 := $(KEYBOARD_PATH_5)/keymaps/$(KEYMAP) - -# Pull in rules from info.json -INFO_RULES_MK = $(shell $(QMK_BIN) generate-rules-mk --quiet --escape --keyboard $(KEYBOARD) --output $(KEYBOARD_OUTPUT)/src/info_rules.mk) -include $(INFO_RULES_MK) - -# Check for keymap.json first, so we can regenerate keymap.c -include build_json.mk - -# Pull in keymap level rules.mk -ifeq ("$(wildcard $(KEYMAP_PATH))", "") - # Look through the possible keymap folders until we find a matching keymap.c - ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_5)/keymap.c)","") - -include $(MAIN_KEYMAP_PATH_5)/rules.mk - KEYMAP_C := $(MAIN_KEYMAP_PATH_5)/keymap.c - KEYMAP_PATH := $(MAIN_KEYMAP_PATH_5) - else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_4)/keymap.c)","") - -include $(MAIN_KEYMAP_PATH_4)/rules.mk - KEYMAP_C := $(MAIN_KEYMAP_PATH_4)/keymap.c - KEYMAP_PATH := $(MAIN_KEYMAP_PATH_4) - else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_3)/keymap.c)","") - -include $(MAIN_KEYMAP_PATH_3)/rules.mk - KEYMAP_C := $(MAIN_KEYMAP_PATH_3)/keymap.c - KEYMAP_PATH := $(MAIN_KEYMAP_PATH_3) - else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_2)/keymap.c)","") - -include $(MAIN_KEYMAP_PATH_2)/rules.mk - KEYMAP_C := $(MAIN_KEYMAP_PATH_2)/keymap.c - KEYMAP_PATH := $(MAIN_KEYMAP_PATH_2) - else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_1)/keymap.c)","") - -include $(MAIN_KEYMAP_PATH_1)/rules.mk - KEYMAP_C := $(MAIN_KEYMAP_PATH_1)/keymap.c - KEYMAP_PATH := $(MAIN_KEYMAP_PATH_1) - else ifneq ($(LAYOUTS),) - # If we haven't found a keymap yet fall back to community layouts - include build_layout.mk - else - $(error Could not find keymap) - # this state should never be reached - endif -endif - -# Have we found a keymap.json? -ifneq ("$(wildcard $(KEYMAP_JSON))", "") - KEYMAP_C := $(KEYMAP_OUTPUT)/src/keymap.c - KEYMAP_H := $(KEYMAP_OUTPUT)/src/config.h - - # Load the keymap-level rules.mk if exists - -include $(KEYMAP_PATH)/rules.mk - - # Load any rules.mk content from keymap.json - INFO_RULES_MK = $(shell $(QMK_BIN) generate-rules-mk --quiet --escape --keyboard $(KEYBOARD) --keymap $(KEYMAP) --output $(KEYMAP_OUTPUT)/src/rules.mk) - include $(INFO_RULES_MK) - -# Add rules to generate the keymap files - indentation here is important -$(KEYMAP_OUTPUT)/src/keymap.c: $(KEYMAP_JSON) - $(QMK_BIN) json2c --quiet --output $(KEYMAP_C) $(KEYMAP_JSON) - -$(KEYMAP_OUTPUT)/src/config.h: $(KEYMAP_JSON) - $(QMK_BIN) generate-config-h --quiet --keyboard $(KEYBOARD) --keymap $(KEYMAP) --output $(KEYMAP_H) - -generated-files: $(KEYMAP_OUTPUT)/src/config.h $(KEYMAP_OUTPUT)/src/keymap.c - -endif - -ifeq ($(strip $(CTPC)), yes) - CONVERT_TO_PROTON_C=yes -endif - -ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes) - include platforms/chibios/boards/QMK_PROTON_C/convert_to_proton_c.mk -endif - -include $(BUILDDEFS_PATH)/mcu_selection.mk - -# Find all the C source files to be compiled in subfolders. -KEYBOARD_SRC := - -KEYBOARD_C_1 := $(KEYBOARD_PATH_1)/$(KEYBOARD_FOLDER_1).c -KEYBOARD_C_2 := $(KEYBOARD_PATH_2)/$(KEYBOARD_FOLDER_2).c -KEYBOARD_C_3 := $(KEYBOARD_PATH_3)/$(KEYBOARD_FOLDER_3).c -KEYBOARD_C_4 := $(KEYBOARD_PATH_4)/$(KEYBOARD_FOLDER_4).c -KEYBOARD_C_5 := $(KEYBOARD_PATH_5)/$(KEYBOARD_FOLDER_5).c - -ifneq ("$(wildcard $(KEYBOARD_C_5))","") - KEYBOARD_SRC += $(KEYBOARD_C_5) -endif -ifneq ("$(wildcard $(KEYBOARD_C_4))","") - KEYBOARD_SRC += $(KEYBOARD_C_4) -endif -ifneq ("$(wildcard $(KEYBOARD_C_3))","") - KEYBOARD_SRC += $(KEYBOARD_C_3) -endif -ifneq ("$(wildcard $(KEYBOARD_C_2))","") - KEYBOARD_SRC += $(KEYBOARD_C_2) -endif -ifneq ("$(wildcard $(KEYBOARD_C_1))","") - KEYBOARD_SRC += $(KEYBOARD_C_1) -endif - -# Generate KEYBOARD_name_subname for all levels of the keyboard folder -KEYBOARD_FILESAFE_1 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_1))) -KEYBOARD_FILESAFE_2 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_2))) -KEYBOARD_FILESAFE_3 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_3))) -KEYBOARD_FILESAFE_4 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_4))) -KEYBOARD_FILESAFE_5 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_5))) - -ifneq ("$(wildcard $(KEYBOARD_PATH_5)/)","") - OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_5) -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_4)/)","") - OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_4) -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_3)/)","") - OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_3) -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_2)/)","") - OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_2) -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_1)/)","") - OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_1) -endif - -# Setup the define for QMK_KEYBOARD_H. This is used inside of keymaps so -# that the same keymap may be used on multiple keyboards. -# -# We grab the most top-level include file that we can. That file should -# use #ifdef statements to include all the neccesary subfolder includes, -# as described here: -# -# https://docs.qmk.fm/#/feature_layouts?id=tips-for-making-layouts-keyboard-agnostic -# -QMK_KEYBOARD_H = $(KEYBOARD_OUTPUT)/src/default_keyboard.h -ifneq ("$(wildcard $(KEYBOARD_PATH_1)/$(KEYBOARD_FOLDER_1).h)","") - QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_1).h -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_2)/$(KEYBOARD_FOLDER_2).h)","") - QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_2).h -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_3)/$(KEYBOARD_FOLDER_3).h)","") - QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_3).h -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_4)/$(KEYBOARD_FOLDER_4).h)","") - QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_4).h -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_5)/$(KEYBOARD_FOLDER_5).h)","") - QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_5).h -endif - -# Determine and set parameters based on the keyboard's processor family. -# We can assume a ChibiOS target When MCU_FAMILY is defined since it's -# not used for LUFA -ifdef MCU_FAMILY - PLATFORM=CHIBIOS - PLATFORM_KEY=chibios - FIRMWARE_FORMAT?=bin - OPT_DEFS += -DMCU_$(MCU_FAMILY) -else ifdef ARM_ATSAM - PLATFORM=ARM_ATSAM - PLATFORM_KEY=arm_atsam - FIRMWARE_FORMAT=bin -else - PLATFORM=AVR - PLATFORM_KEY=avr - FIRMWARE_FORMAT?=hex -endif - -# Find all of the config.h files and add them to our CONFIG_H define. -CONFIG_H := -ifneq ("$(wildcard $(KEYBOARD_PATH_5)/config.h)","") - CONFIG_H += $(KEYBOARD_PATH_5)/config.h -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_4)/config.h)","") - CONFIG_H += $(KEYBOARD_PATH_4)/config.h -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_3)/config.h)","") - CONFIG_H += $(KEYBOARD_PATH_3)/config.h -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_2)/config.h)","") - CONFIG_H += $(KEYBOARD_PATH_2)/config.h -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_1)/config.h)","") - CONFIG_H += $(KEYBOARD_PATH_1)/config.h -endif - -POST_CONFIG_H := -ifneq ("$(wildcard $(KEYBOARD_PATH_1)/post_config.h)","") - POST_CONFIG_H += $(KEYBOARD_PATH_1)/post_config.h -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_2)/post_config.h)","") - POST_CONFIG_H += $(KEYBOARD_PATH_2)/post_config.h -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_3)/post_config.h)","") - POST_CONFIG_H += $(KEYBOARD_PATH_3)/post_config.h -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_4)/post_config.h)","") - POST_CONFIG_H += $(KEYBOARD_PATH_4)/post_config.h -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_5)/post_config.h)","") - POST_CONFIG_H += $(KEYBOARD_PATH_5)/post_config.h -endif - -# Pull in stuff from info.json -INFO_JSON_FILES := -ifneq ("$(wildcard $(KEYBOARD_PATH_1)/info.json)","") - INFO_JSON_FILES += $(KEYBOARD_PATH_1)/info.json -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_2)/info.json)","") - INFO_JSON_FILES += $(KEYBOARD_PATH_2)/info.json -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_3)/info.json)","") - INFO_JSON_FILES += $(KEYBOARD_PATH_3)/info.json -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_4)/info.json)","") - INFO_JSON_FILES += $(KEYBOARD_PATH_4)/info.json -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_5)/info.json)","") - INFO_JSON_FILES += $(KEYBOARD_PATH_5)/info.json -endif - -CONFIG_H += $(KEYBOARD_OUTPUT)/src/info_config.h $(KEYBOARD_OUTPUT)/src/layouts.h - -$(KEYBOARD_OUTPUT)/src/info_config.h: $(INFO_JSON_FILES) - $(QMK_BIN) generate-config-h --quiet --keyboard $(KEYBOARD) --output $(KEYBOARD_OUTPUT)/src/info_config.h - -$(KEYBOARD_OUTPUT)/src/default_keyboard.h: $(INFO_JSON_FILES) - $(QMK_BIN) generate-keyboard-h --quiet --keyboard $(KEYBOARD) --output $(KEYBOARD_OUTPUT)/src/default_keyboard.h - -$(KEYBOARD_OUTPUT)/src/layouts.h: $(INFO_JSON_FILES) - $(QMK_BIN) generate-layouts --quiet --keyboard $(KEYBOARD) --output $(KEYBOARD_OUTPUT)/src/layouts.h - -generated-files: $(KEYBOARD_OUTPUT)/src/info_config.h $(KEYBOARD_OUTPUT)/src/default_keyboard.h $(KEYBOARD_OUTPUT)/src/layouts.h - -.INTERMEDIATE : generated-files - -# Userspace setup and definitions -ifeq ("$(USER_NAME)","") - USER_NAME := $(KEYMAP) -endif -USER_PATH := users/$(USER_NAME) - -# Pull in user level rules.mk --include $(USER_PATH)/rules.mk -ifneq ("$(wildcard $(USER_PATH)/config.h)","") - CONFIG_H += $(USER_PATH)/config.h -endif -ifneq ("$(wildcard $(USER_PATH)/post_config.h)","") - POST_CONFIG_H += $(USER_PATH)/post_config.h -endif - -# Disable features that a keyboard doesn't support --include $(BUILDDEFS_PATH)/disable_features.mk - -# Pull in post_rules.mk files from all our subfolders -ifneq ("$(wildcard $(KEYBOARD_PATH_1)/post_rules.mk)","") - include $(KEYBOARD_PATH_1)/post_rules.mk -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_2)/post_rules.mk)","") - include $(KEYBOARD_PATH_2)/post_rules.mk -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_3)/post_rules.mk)","") - include $(KEYBOARD_PATH_3)/post_rules.mk -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_4)/post_rules.mk)","") - include $(KEYBOARD_PATH_4)/post_rules.mk -endif -ifneq ("$(wildcard $(KEYBOARD_PATH_5)/post_rules.mk)","") - include $(KEYBOARD_PATH_5)/post_rules.mk -endif - -ifneq ("$(wildcard $(KEYMAP_PATH)/config.h)","") - CONFIG_H += $(KEYMAP_PATH)/config.h -endif -ifneq ("$(KEYMAP_H)","") - CONFIG_H += $(KEYMAP_H) -endif - -# project specific files -SRC += \ - $(KEYBOARD_SRC) \ - $(KEYMAP_C) \ - $(QUANTUM_SRC) \ - $(QUANTUM_DIR)/main.c \ - -# Optimize size but this may cause error "relocation truncated to fit" -#EXTRALDFLAGS = -Wl,--relax - -# Search Path -VPATH += $(KEYMAP_PATH) -VPATH += $(USER_PATH) -VPATH += $(KEYBOARD_PATHS) -VPATH += $(COMMON_VPATH) - -include common_features.mk -include $(BUILDDEFS_PATH)/generic_features.mk -include $(TMK_PATH)/protocol.mk -include $(PLATFORM_PATH)/common.mk -include $(BUILDDEFS_PATH)/bootloader.mk - -SRC += $(patsubst %.c,%.clib,$(LIB_SRC)) -SRC += $(patsubst %.c,%.clib,$(QUANTUM_LIB_SRC)) -SRC += $(TMK_COMMON_SRC) -OPT_DEFS += $(TMK_COMMON_DEFS) -EXTRALDFLAGS += $(TMK_COMMON_LDFLAGS) - -SKIP_COMPILE := no -ifneq ($(REQUIRE_PLATFORM_KEY),) - ifneq ($(REQUIRE_PLATFORM_KEY),$(PLATFORM_KEY)) - SKIP_COMPILE := yes - endif -endif - -include $(PLATFORM_PATH)/$(PLATFORM_KEY)/platform.mk --include $(PLATFORM_PATH)/$(PLATFORM_KEY)/flash.mk - -ifneq ($(strip $(PROTOCOL)),) - include $(TMK_PATH)/protocol/$(strip $(shell echo $(PROTOCOL) | tr '[:upper:]' '[:lower:]')).mk -else - include $(TMK_PATH)/protocol/$(PLATFORM_KEY).mk -endif - -# TODO: remove this bodge? -PROJECT_DEFS := $(OPT_DEFS) -PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(KEYBOARD_PATHS) -PROJECT_CONFIG := $(CONFIG_H) - -CONFIG_H += $(POST_CONFIG_H) -ALL_CONFIGS := $(PROJECT_CONFIG) $(CONFIG_H) - -OUTPUTS := $(KEYMAP_OUTPUT) $(KEYBOARD_OUTPUT) -$(KEYMAP_OUTPUT)_SRC := $(SRC) -$(KEYMAP_OUTPUT)_DEFS := $(OPT_DEFS) \ --DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYBOARD_H=\"$(QMK_KEYBOARD_H)\" \ --DQMK_KEYMAP=\"$(KEYMAP)\" -DQMK_KEYMAP_H=\"$(KEYMAP).h\" -DQMK_KEYMAP_CONFIG_H=\"$(KEYMAP_PATH)/config.h\" -$(KEYMAP_OUTPUT)_INC := $(VPATH) $(EXTRAINCDIRS) -$(KEYMAP_OUTPUT)_CONFIG := $(CONFIG_H) -$(KEYBOARD_OUTPUT)_SRC := $(PLATFORM_SRC) -$(KEYBOARD_OUTPUT)_DEFS := $(PROJECT_DEFS) -$(KEYBOARD_OUTPUT)_INC := $(PROJECT_INC) -$(KEYBOARD_OUTPUT)_CONFIG := $(PROJECT_CONFIG) - -# Default target. -ifeq ($(SKIP_COMPILE),no) -all: build check-size -else -all: - echo "skipped" >&2 -endif - -build: elf cpfirmware -check-size: build -check-md5: build -objs-size: build - -include $(BUILDDEFS_PATH)/show_options.mk -include $(TMK_PATH)/rules.mk - -# Ensure we have generated files available for each of the objects -define GEN_FILES -$1: generated-files -endef -$(foreach O,$(OBJ),$(eval $(call GEN_FILES,$(patsubst %.a,%.o,$(O))))) |