diff options
55 files changed, 2789 insertions, 1371 deletions
@@ -25,6 +25,7 @@ endif ifdef MOUSEKEY_ENABLE SRC += $(COMMON_DIR)/mousekey.c OPT_DEFS += -DMOUSEKEY_ENABLE + OPT_DEFS += -DMOUSE_ENABLE endif ifdef EXTRAKEY_ENABLE @@ -47,16 +48,6 @@ ifdef NKRO_ENABLE OPT_DEFS += -DNKRO_ENABLE endif -ifdef PS2_MOUSE_ENABLE - SRC += $(COMMON_DIR)/ps2.c \ - $(COMMON_DIR)/ps2_mouse.c - OPT_DEFS += -DPS2_MOUSE_ENABLE -endif - -ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE) - OPT_DEFS += -DMOUSE_ENABLE -endif - ifdef SLEEP_LED_ENABLE SRC += $(COMMON_DIR)/sleep_led.c OPT_DEFS += -DSLEEP_LED_ENABLE diff --git a/common/action.c b/common/action.c index 38ee12abe1..e6938f5a23 100644 --- a/common/action.c +++ b/common/action.c @@ -496,12 +496,6 @@ void clear_keyboard_but_mods(void) #endif } -bool sending_anykey(void) -{ - return (has_anykey() || host_mouse_in_use() || - host_last_sysytem_report() || host_last_consumer_report()); -} - bool is_tap_key(key_t key) { action_t action = layer_switch_get_action(key); diff --git a/common/action.h b/common/action.h index d57f4a86ff..077711c231 100644 --- a/common/action.h +++ b/common/action.h @@ -64,7 +64,6 @@ void unregister_mods(uint8_t mods); //void set_mods(uint8_t mods); void clear_keyboard(void); void clear_keyboard_but_mods(void); -bool sending_anykey(void); void layer_switch(uint8_t new_layer); bool is_tap_key(key_t key); diff --git a/common/action_code.h b/common/action_code.h index bd3652e380..8df86b1192 100644 --- a/common/action_code.h +++ b/common/action_code.h @@ -209,11 +209,11 @@ enum mods_codes { MODS_TAP_TOGGLE = 0x01, }; #define ACTION_KEY(key) ACTION(ACT_MODS, (key)) -#define ACTION_MODS(mods) ACTION(ACT_MODS, (mods&0x1f)<<8 | 0) -#define ACTION_MODS_KEY(mods, key) ACTION(ACT_MODS, (mods&0x1f)<<8 | (key)) -#define ACTION_MODS_TAP_KEY(mods, key) ACTION(ACT_MODS_TAP, (mods&0x1f)<<8 | (key)) -#define ACTION_MODS_ONESHOT(mods) ACTION(ACT_MODS_TAP, (mods&0x1f)<<8 | MODS_ONESHOT) -#define ACTION_MODS_TAP_TOGGLE(mods) ACTION(ACT_MODS_TAP, (mods&0x1f)<<8 | MODS_TAP_TOGGLE) +#define ACTION_MODS(mods) ACTION(ACT_MODS, ((mods)&0x1f)<<8 | 0) +#define ACTION_MODS_KEY(mods, key) ACTION(ACT_MODS, ((mods)&0x1f)<<8 | (key)) +#define ACTION_MODS_TAP_KEY(mods, key) ACTION(ACT_MODS_TAP, ((mods)&0x1f)<<8 | (key)) +#define ACTION_MODS_ONESHOT(mods) ACTION(ACT_MODS_TAP, ((mods)&0x1f)<<8 | MODS_ONESHOT) +#define ACTION_MODS_TAP_TOGGLE(mods) ACTION(ACT_MODS_TAP, ((mods)&0x1f)<<8 | MODS_TAP_TOGGLE) /* diff --git a/common/action_util.h b/common/action_util.h index 939bc2b662..f9d3161a80 100644 --- a/common/action_util.h +++ b/common/action_util.h @@ -18,6 +18,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define ACTION_UTIL_H #include <stdint.h> +#include "report.h" extern report_keyboard_t *keyboard_report; diff --git a/common/host.c b/common/host.c index 0703dba013..1eafef75cc 100644 --- a/common/host.c +++ b/common/host.c @@ -27,9 +27,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. bool keyboard_nkro = false; #endif -report_mouse_t mouse_report = {}; - - static host_driver_t *driver; static uint16_t last_system_report = 0; static uint16_t last_consumer_report = 0; @@ -89,11 +86,6 @@ void host_consumer_send(uint16_t report) (*driver->send_consumer)(report); } -uint8_t host_mouse_in_use(void) -{ - return (mouse_report.buttons | mouse_report.x | mouse_report.y | mouse_report.v | mouse_report.h); -} - uint16_t host_last_sysytem_report(void) { return last_system_report; diff --git a/common/host.h b/common/host.h index c1a0fbac40..8ff2629852 100644 --- a/common/host.h +++ b/common/host.h @@ -32,9 +32,6 @@ extern "C" { extern bool keyboard_nkro; #endif -/* report */ -extern report_mouse_t mouse_report; - /* host driver */ void host_set_driver(host_driver_t *driver); @@ -47,9 +44,6 @@ void host_mouse_send(report_mouse_t *report); void host_system_send(uint16_t data); void host_consumer_send(uint16_t data); -/* mouse report utils */ -uint8_t host_mouse_in_use(void); - uint16_t host_last_sysytem_report(void); uint16_t host_last_consumer_report(void); diff --git a/common/keyboard.c b/common/keyboard.c index 601e3abe17..2b66f20a01 100644 --- a/common/keyboard.c +++ b/common/keyboard.c @@ -30,8 +30,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "sendchar.h" #include "bootmagic.h" #include "eeconfig.h" -#include "mousekey.h" #include "backlight.h" +#ifdef MOUSEKEY_ENABLE +# include "mousekey.h" +#endif +#ifdef PS2_MOUSE_ENABLE +# include "ps2_mouse.h" +#endif #ifdef MATRIX_HAS_GHOST @@ -111,10 +116,16 @@ void keyboard_task(void) action_exec(TICK); MATRIX_LOOP_END: + #ifdef MOUSEKEY_ENABLE // mousekey repeat & acceleration mousekey_task(); #endif + +#ifdef PS2_MOUSE_ENABLE + ps2_mouse_task(); +#endif + // update LED if (led_status != host_keyboard_leds()) { led_status = host_keyboard_leds(); diff --git a/common/mousekey.c b/common/mousekey.c index 3068fc5e37..017be94116 100644 --- a/common/mousekey.c +++ b/common/mousekey.c @@ -26,6 +26,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. +static report_mouse_t mouse_report = {}; static uint8_t mousekey_repeat = 0; static uint8_t mousekey_accel = 0; diff --git a/converter/ps2_usb/Makefile b/converter/ps2_usb/Makefile index 0c6442374c..04bf28a00c 100644 --- a/converter/ps2_usb/Makefile +++ b/converter/ps2_usb/Makefile @@ -1,5 +1,5 @@ # Target file name (without extension). -TARGET = ps2_usb +TARGET = ps2_usb_lufa # Directory common source filess exist TOP_DIR = ../.. @@ -7,69 +7,96 @@ TOP_DIR = ../.. # Directory keyboard dependent files exist TARGET_DIR = . +# project specific files +SRC = keymap_common.c \ + matrix.c \ + led.c + +ifdef KEYMAP + SRC := keymap_$(KEYMAP).c $(SRC) +else + SRC := keymap_plain.c $(SRC) +endif + +CONFIG_H = config.h -# MCU name, you MUST set this to match the board you are using -# type "make clean" after changing this, so all files will be rebuilt -#MCU = at90usb162 # Teensy 1.0 -MCU = atmega32u4 # Teensy 2.0 -#MCU = at90usb646 # Teensy++ 1.0 -#MCU = at90usb1286 # Teensy++ 2.0 +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 # Processor frequency. -# Normally the first thing your program should do is set the clock prescaler, -# so your program will run at the correct speed. You should also set this -# variable to same clock speed. The _delay_ms() macro uses this, and many -# examples use this variable to calculate timings. Do not add a "UL" here. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. F_CPU = 16000000 -# Build Options -# *Comment out* to disable the options. # -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -NKRO_ENABLE = yes # USB Nkey Rollover +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) -PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened) -#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin -#PS2_USE_BUSYWAIT = yes # uses primitive reference code +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT -# keyboard dependent files -SRC = keymap.c \ - matrix.c \ - led.c - +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 -ifdef PS2_USE_USART - SRC += protocol/ps2_usart.c - OPT_DEFS += -DPS2_USE_USART -endif -ifdef PS2_USE_INT - SRC += protocol/ps2.c - OPT_DEFS += -DPS2_USE_INT -endif -ifdef PS2_USE_BUSYWAIT - SRC += protocol/ps2.c - OPT_DEFS += -DPS2_USE_BUSYWAIT -endif +# Build Options +# comment out to disable the options. +# +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA -#CONFIG_H = config_pjrc_usart.h -CONFIG_H = config.h +# PS/2 Options +# +#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened) +#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin +PS2_USE_BUSYWAIT = yes # uses primitive reference code -#---------------- Programming Options -------------------------- -PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex +# Optimize size but this may cause error "relocation truncated to fit" +#EXTRALDFLAGS = -Wl,--relax # Search Path VPATH += $(TARGET_DIR) VPATH += $(TOP_DIR) - -include $(TOP_DIR)/protocol/pjrc.mk include $(TOP_DIR)/protocol.mk +include $(TOP_DIR)/protocol/lufa.mk include $(TOP_DIR)/common.mk include $(TOP_DIR)/rules.mk diff --git a/converter/ps2_usb/Makefile.pjrc b/converter/ps2_usb/Makefile.pjrc new file mode 100644 index 0000000000..0e175f8b45 --- /dev/null +++ b/converter/ps2_usb/Makefile.pjrc @@ -0,0 +1,75 @@ +# Target file name (without extension). +TARGET = ps2_usb_pjrc + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# keyboard dependent files +SRC = keymap_common.c \ + matrix.c \ + led.c + +ifdef KEYMAP + SRC := keymap_$(KEYMAP).c $(SRC) +else + SRC := keymap_plain.c $(SRC) +endif + +CONFIG_H = config.h + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +#MCU = at90usb162 # Teensy 1.0 +MCU = atmega32u4 # Teensy 2.0 +#MCU = at90usb646 # Teensy++ 1.0 +#MCU = at90usb1286 # Teensy++ 2.0 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# *Comment out* to disable the options. +# +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # USB Nkey Rollover + + +# PS/2 Options +# +#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened) +#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin +PS2_USE_BUSYWAIT = yes # uses primitive reference code + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + + +include $(TOP_DIR)/protocol.mk +include $(TOP_DIR)/protocol/pjrc.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk diff --git a/converter/ps2_usb/config.h b/converter/ps2_usb/config.h index 51cd271d78..c9bab1b072 100644 --- a/converter/ps2_usb/config.h +++ b/converter/ps2_usb/config.h @@ -22,6 +22,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x6512 +#define DEVICE_VER 0x0001 #define MANUFACTURER t.m.k. #define PRODUCT PS/2 keyboard converter #define DESCRIPTION convert PS/2 keyboard to USB @@ -39,10 +40,52 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. ) -/* legacy keymap support */ -#define USE_LEGACY_KEYMAP +//#define NO_SUSPEND_POWER_DOWN +/* + * PS/2 Busywait + */ +#ifdef PS2_USE_BUSYWAIT +#define PS2_CLOCK_PORT PORTD +#define PS2_CLOCK_PIN PIND +#define PS2_CLOCK_DDR DDRD +#define PS2_CLOCK_BIT 5 +#define PS2_DATA_PORT PORTD +#define PS2_DATA_PIN PIND +#define PS2_DATA_DDR DDRD +#define PS2_DATA_BIT 2 +#endif + +/* + * PS/2 Pin interrupt + */ +#ifdef PS2_USE_INT +/* uses INT1 for clock line(ATMega32U4) */ +#define PS2_CLOCK_PORT PORTD +#define PS2_CLOCK_PIN PIND +#define PS2_CLOCK_DDR DDRD +#define PS2_CLOCK_BIT 1 +#define PS2_DATA_PORT PORTD +#define PS2_DATA_PIN PIND +#define PS2_DATA_DDR DDRD +#define PS2_DATA_BIT 2 +#define PS2_INT_INIT() do { \ + EICRA |= ((1<<ISC11) | \ + (0<<ISC10)); \ +} while (0) +#define PS2_INT_ON() do { \ + EIMSK |= (1<<INT1); \ +} while (0) +#define PS2_INT_OFF() do { \ + EIMSK &= ~(1<<INT1); \ +} while (0) +#define PS2_INT_VECT INT1_vect +#endif + +/* + * PS/2 USART + */ #ifdef PS2_USE_USART #if defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) /* XCK for clock line and RXD for data line */ @@ -54,7 +97,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define PS2_DATA_PIN PIND #define PS2_DATA_DDR DDRD #define PS2_DATA_BIT 2 - /* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */ /* set DDR of CLOCK as input to be slave */ #define PS2_USART_INIT() do { \ @@ -85,7 +127,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define PS2_USART_RX_DATA UDR1 #define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1))) #define PS2_USART_RX_VECT USART1_RX_vect - #elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__) /* XCK for clock line and RXD for data line */ #define PS2_CLOCK_PORT PORTD @@ -96,7 +137,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define PS2_DATA_PIN PIND #define PS2_DATA_DDR DDRD #define PS2_DATA_BIT 0 - /* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */ /* set DDR of CLOCK as input to be slave */ #define PS2_USART_INIT() do { \ @@ -130,41 +170,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #endif #endif - -#ifdef PS2_USE_INT -/* uses INT1 for clock line(ATMega32U4) */ -#define PS2_CLOCK_PORT PORTD -#define PS2_CLOCK_PIN PIND -#define PS2_CLOCK_DDR DDRD -#define PS2_CLOCK_BIT 1 -#define PS2_DATA_PORT PORTD -#define PS2_DATA_PIN PIND -#define PS2_DATA_DDR DDRD -#define PS2_DATA_BIT 2 - -#define PS2_INT_INIT() do { \ - EICRA |= ((1<<ISC11) | \ - (0<<ISC10)); \ -} while (0) -#define PS2_INT_ON() do { \ - EIMSK |= (1<<INT1); \ -} while (0) -#define PS2_INT_OFF() do { \ - EIMSK &= ~(1<<INT1); \ -} while (0) -#define PS2_INT_VECT INT1_vect -#endif - - -#ifdef PS2_USE_BUSYWAIT -#define PS2_CLOCK_PORT PORTF -#define PS2_CLOCK_PIN PINF -#define PS2_CLOCK_DDR DDRF -#define PS2_CLOCK_BIT 0 -#define PS2_DATA_PORT PORTF -#define PS2_DATA_PIN PINF -#define PS2_DATA_DDR DDRF -#define PS2_DATA_BIT 1 -#endif - #endif diff --git a/converter/ps2_usb/keymap.c b/converter/ps2_usb/keymap.c deleted file mode 100644 index c97783fa53..0000000000 --- a/converter/ps2_usb/keymap.c +++ /dev/null @@ -1,379 +0,0 @@ -/* -Copyright 2011 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * Keymap for PS/2 keyboard - */ -#include <stdint.h> -#include <stdbool.h> -#include <avr/pgmspace.h> -#include "keycode.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "keymap.h" - - - - -// Following macros help you to define a keymap with the form of actual keyboard layout. - -/* US layout plus all other various keys */ -#define KEYMAP_ALL( \ - K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \ - K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \ - K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \ - K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \ - K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \ - K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \ - \ - K61, /* for European ISO */ \ - K51, K13, K6A, K64, K67, /* for Japanese JIS */ \ - K08, K10, K18, K20, K28, K30, K38, K40, K48, K50, K57, K5F, /* F13-24 */ \ - KB7, KBF, KDE, /* System Power, Sleep, Wake */ \ - KA3, KB2, KA1, /* Mute, Volume Up, Volume Down */ \ - KCD, K95, KBB, KB4, KD0, /* Next, Previous, Stop, Pause, Media Select */ \ - KC8, KAB, KC0, /* Mail, Calculator, My Computer */ \ - K90, KBA, KB8, KB0, /* WWW Search, Home, Back, Forward */ \ - KA8, KA0, K98 /* WWW Stop, Refresh, Favorites */ \ -) { \ - { KC_NO, KC_##K01, KC_NO, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \ - { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_NO }, \ - { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_NO }, \ - { KC_##K18, KC_NO, KC |