summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--keyboards/k_type/i2c_master.c145
-rw-r--r--keyboards/k_type/i2c_master.h127
-rw-r--r--keyboards/k_type/is31fl3733.c231
-rw-r--r--keyboards/k_type/is31fl3733.h251
-rw-r--r--keyboards/k_type/k_type.c201
-rw-r--r--keyboards/k_type/keymaps/andrew-fahmy/config.h52
-rw-r--r--keyboards/k_type/keymaps/andrew-fahmy/keymap.c60
-rw-r--r--keyboards/k_type/keymaps/andrew-fahmy/rules.mk1
-rw-r--r--keyboards/k_type/keymaps/rgb/config.h25
-rw-r--r--keyboards/k_type/keymaps/rgb/keymap.c4
-rw-r--r--keyboards/k_type/keymaps/rgb/readme.md4
-rw-r--r--keyboards/k_type/led.c53
-rw-r--r--keyboards/k_type/mcuconf.h3
-rw-r--r--keyboards/k_type/rules.mk4
14 files changed, 1058 insertions, 103 deletions
diff --git a/keyboards/k_type/i2c_master.c b/keyboards/k_type/i2c_master.c
new file mode 100644
index 0000000000..72d835a604
--- /dev/null
+++ b/keyboards/k_type/i2c_master.c
@@ -0,0 +1,145 @@
+/* Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* This library is only valid for STM32 processors.
+ * This library follows the convention of the AVR i2c_master library.
+ * As a result addresses are expected to be already shifted (addr << 1).
+ * I2CD1 is the default driver which corresponds to pins B6 and B7. This
+ * can be changed.
+ * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
+ * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. Pins B6 and B7 are used
+ * but using any other I2C pins should be trivial.
+ */
+#include "quantum.h"
+#include "i2c_master.h"
+#include "print.h"
+#include <string.h>
+#include <hal.h>
+
+static uint8_t i2c_address;
+
+I2CDriver *drivers[I2C_COUNT];
+
+static const I2CConfig i2cconfig = {
+#if defined(USE_I2CV1_CONTRIB)
+ I2C1_CLOCK_SPEED,
+#elif defined(USE_I2CV1)
+ I2C1_OPMODE,
+ I2C1_CLOCK_SPEED,
+ I2C1_DUTY_CYCLE,
+#else
+ // This configures the I2C clock to 400khz assuming a 72Mhz clock
+ // For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
+ STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) | STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) | STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH) | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL), 0, 0
+#endif
+};
+
+static i2c_status_t chibios_to_qmk(const msg_t* status) {
+ switch (*status) {
+ case I2C_NO_ERROR:
+ return I2C_STATUS_SUCCESS;
+ case I2C_TIMEOUT:
+ return I2C_STATUS_TIMEOUT;
+ // I2C_BUS_ERROR, I2C_ARBITRATION_LOST, I2C_ACK_FAILURE, I2C_OVERRUN, I2C_PEC_ERROR, I2C_SMB_ALERT
+ default:
+ return I2C_STATUS_ERROR;
+ }
+}
+
+__attribute__((weak)) void i2c_init(I2CDriver *driver, ioportid_t scl_port, ioportid_t sda_port, iopadid_t scl_pad, iopadid_t sda_pad) {
+ static uint8_t index = 0;
+ if (index < I2C_COUNT) {
+
+ // Try releasing special pins for a short time
+ palSetPadMode(scl_port, scl_pad, PAL_MODE_INPUT);
+ palSetPadMode(sda_port, sda_pad, PAL_MODE_INPUT);
+
+ chThdSleepMilliseconds(10);
+
+#if defined(USE_GPIOV1)
+ palSetPadMode(scl_port, scl_pad, I2C1_SCL_PAL_MODE);
+ palSetPadMode(sda_port, sda_pad, I2C1_SDA_PAL_MODE);
+#else
+ palSetPadMode(scl_port, scl_pad, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
+ palSetPadMode(sda_port, sda_pad, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
+#endif
+
+ drivers[index++] = driver;
+ }
+}
+
+i2c_status_t i2c_start(uint8_t index, uint8_t address) {
+ if(index >= I2C_COUNT) {
+ return I2C_STATUS_ERROR;
+ }
+ i2c_address = address;
+ i2cStart(drivers[index], &i2cconfig);
+ return I2C_STATUS_SUCCESS;
+}
+
+i2c_status_t i2c_transmit(uint8_t index, uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) {
+ if(index >= I2C_COUNT) {
+ return I2C_STATUS_ERROR;
+ }
+ i2c_address = address;
+ i2cStart(drivers[index], &i2cconfig);
+ msg_t status = i2cMasterTransmitTimeout(drivers[index], (i2c_address >> 1), data, length, 0, 0, TIME_MS2I(timeout));
+ return chibios_to_qmk(&status);
+}
+
+i2c_status_t i2c_receive(uint8_t index, uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) {
+ if(index >= I2C_COUNT) {
+ return I2C_STATUS_ERROR;
+ }
+ i2c_address = address;
+ i2cStart(drivers[index], &i2cconfig);
+ msg_t status = i2cMasterReceiveTimeout(drivers[index], (i2c_address >> 1), data, length, TIME_MS2I(timeout));
+ return chibios_to_qmk(&status);
+}
+
+i2c_status_t i2c_writeReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) {
+ if(index >= I2C_COUNT) {
+ return I2C_STATUS_ERROR;
+ }
+ i2c_address = devaddr;
+ i2cStart(drivers[index], &i2cconfig);
+
+ uint8_t complete_packet[length + 1];
+ for (uint8_t i = 0; i < length; i++) {
+ complete_packet[i + 1] = data[i];
+ }
+ complete_packet[0] = regaddr;
+
+ msg_t status = i2cMasterTransmitTimeout(drivers[index], (i2c_address >> 1), complete_packet, length + 1, 0, 0, TIME_MS2I(timeout));
+ return chibios_to_qmk(&status);
+}
+
+i2c_status_t i2c_readReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) {
+ if(index >= I2C_COUNT) {
+ return I2C_STATUS_ERROR;
+ }
+ i2c_address = devaddr;
+ i2cStart(drivers[index], &i2cconfig);
+ msg_t status = i2cMasterTransmitTimeout(drivers[index], (i2c_address >> 1), &regaddr, 1, data, length, TIME_MS2I(timeout));
+ return chibios_to_qmk(&status);
+}
+
+void i2c_stop(uint8_t index) {
+ if(index < I2C_COUNT) {
+ i2cStop(drivers[index]);
+ }
+}
diff --git a/keyboards/k_type/i2c_master.h b/keyboards/k_type/i2c_master.h
new file mode 100644
index 0000000000..5a7893fae8
--- /dev/null
+++ b/keyboards/k_type/i2c_master.h
@@ -0,0 +1,127 @@
+/* Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* This library follows the convention of the AVR i2c_master library.
+ * As a result addresses are expected to be already shifted (addr << 1).
+ * I2CD1 is the default driver which corresponds to pins B6 and B7. This
+ * can be changed.
+ * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
+ * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file.
+ */
+#pragma once
+
+#include <ch.h>
+#include <hal.h>
+
+#ifndef I2C_COUNT
+# define I2C_COUNT 1
+#endif
+
+#ifdef I2C1_BANK
+# define I2C1_SCL_BANK I2C1_BANK
+# define I2C1_SDA_BANK I2C1_BANK
+#endif
+
+#ifndef I2C1_SCL_BANK
+# define I2C1_SCL_BANK GPIOB
+#endif
+
+#ifndef I2C1_SDA_BANK
+# define I2C1_SDA_BANK GPIOB
+#endif
+
+
+#ifdef USE_I2C2
+# ifdef I2C2_BANK
+# define I2C2_SCL_BANK I2C2_BANK
+# define I2C2_SDA_BANK I2C2_BANK
+# endif
+# ifndef I2C2_SCL_BANK
+# define I2C2_SCL_BANK GPIOC
+# endif
+# ifndef I2C2_SDA_BANK
+# define I2C2_SDA_BANK GPIOC
+# endif
+#endif
+
+#ifndef I2C1_SCL
+# define I2C1_SCL 6
+#endif
+#ifndef I2C1_SDA
+# define I2C1_SDA 7
+#endif
+
+#ifdef USE_I2CV1
+# ifndef I2C1_OPMODE
+# define I2C1_OPMODE OPMODE_I2C
+# endif
+# ifndef I2C1_CLOCK_SPEED
+# define I2C1_CLOCK_SPEED 100000 /* 400000 */
+# endif
+# ifndef I2C1_DUTY_CYCLE
+# define I2C1_DUTY_CYCLE STD_DUTY_CYCLE /* FAST_DUTY_CYCLE_2 */
+# endif
+#else
+// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock
+// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
+# ifndef I2C1_TIMINGR_PRESC
+# define I2C1_TIMINGR_PRESC 0U
+# endif
+# ifndef I2C1_TIMINGR_SCLDEL
+# define I2C1_TIMINGR_SCLDEL 7U
+# endif
+# ifndef I2C1_TIMINGR_SDADEL
+# define I2C1_TIMINGR_SDADEL 0U
+# endif
+# ifndef I2C1_TIMINGR_SCLH
+# define I2C1_TIMINGR_SCLH 38U
+# endif
+# ifndef I2C1_TIMINGR_SCLL
+# define I2C1_TIMINGR_SCLL 129U
+# endif
+#endif
+
+#ifdef USE_GPIOV1
+# ifndef I2C1_SCL_PAL_MODE
+# define I2C1_SCL_PAL_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN
+# endif
+# ifndef I2C1_SDA_PAL_MODE
+# define I2C1_SDA_PAL_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN
+# endif
+#else
+// The default PAL alternate modes are used to signal that the pins are used for I2C
+# ifndef I2C1_SCL_PAL_MODE
+# define I2C1_SCL_PAL_MODE 4
+# endif
+# ifndef I2C1_SDA_PAL_MODE
+# define I2C1_SDA_PAL_MODE 4
+# endif
+#endif
+
+typedef int16_t i2c_status_t;
+
+#define I2C_STATUS_SUCCESS (0)
+#define I2C_STATUS_ERROR (-1)
+#define I2C_STATUS_TIMEOUT (-2)
+
+void i2c_init(I2CDriver *driver, ioportid_t scl_port, ioportid_t sda_port, iopadid_t scl_pad, iopadid_t sda_pad);
+i2c_status_t i2c_start(uint8_t index, uint8_t address);
+i2c_status_t i2c_transmit(uint8_t index, uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout);
+i2c_status_t i2c_receive(uint8_t index, uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
+i2c_status_t i2c_writeReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout);
+i2c_status_t i2c_readReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
+void i2c_stop(uint8_t index);
diff --git a/keyboards/k_type/is31fl3733.c b/keyboards/k_type/is31fl3733.c
new file mode 100644
index 0000000000..8818a622bc
--- /dev/null
+++ b/keyboards/k_type/is31fl3733.c
@@ -0,0 +1,231 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "is31fl3733.h"
+#include "i2c_master.h"
+#include "wait.h"
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 00 <-> GND
+// 01 <-> SCL
+// 10 <-> SDA
+// 11 <-> VCC
+// ADDR1 represents A1:A0 of the 7-bit address.
+// ADDR2 represents A3:A2 of the 7-bit address.
+// The result is: 0b101(ADDR2)(ADDR1)
+#define ISSI_ADDR_DEFAULT 0x50
+
+#define ISSI_COMMANDREGISTER 0xFD
+#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
+#define ISSI_INTERRUPTMASKREGISTER 0xF0
+#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
+
+#define ISSI_PAGE_LEDCONTROL 0x00 // PG0
+#define ISSI_PAGE_PWM 0x01 // PG1
+#define ISSI_PAGE_AUTOBREATH 0x02 // PG2
+#define ISSI_PAGE_FUNCTION 0x03 // PG3
+
+#define ISSI_REG_CONFIGURATION 0x00 // PG3
+#define ISSI_REG_GLOBALCURRENT 0x01 // PG3
+#define ISSI_REG_RESET 0x11 // PG3
+#define ISSI_REG_SWPULLUP 0x0F // PG3
+#define ISSI_REG_CSPULLUP 0x10 // PG3
+
+#ifndef ISSI_TIMEOUT
+# define ISSI_TIMEOUT 100
+#endif
+
+#ifndef ISSI_PERSISTENCE
+# define ISSI_PERSISTENCE 0
+#endif
+
+// Transfer buffer for TWITransmitData()
+uint8_t g_twi_transfer_buffer[20];
+
+// These buffers match the IS31FL3733 PWM registers.
+// The control buffers match the PG0 LED On/Off registers.
+// Storing them like this is optimal for I2C transfers to the registers.
+// We could optimize this and take out the unused registers from these
+// buffers and the transfers in IS31FL3733_write_pwm_buffer() but it's
+// probably not worth the extra complexity.
+uint8_t g_pwm_buffer[DRIVER_COUNT][192];
+bool g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
+
+uint8_t g_led_control_registers[DRIVER_COUNT][24] = {{0}, {0}};
+bool g_led_control_registers_update_required[DRIVER_COUNT] = {false};
+
+bool IS31FL3733_write_register(uint8_t index, uint8_t addr, uint8_t reg, uint8_t data) {
+ // If the transaction fails function returns false.
+ g_twi_transfer_buffer[0] = reg;
+ g_twi_transfer_buffer[1] = data;
+
+#if ISSI_PERSISTENCE > 0
+ for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+ if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) {
+ return false;
+ }
+ }
+#else
+ if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) {
+ return false;
+ }
+#endif
+ return true;
+}
+
+bool IS31FL3733_write_pwm_buffer(uint8_t index, uint8_t addr, uint8_t *pwm_buffer) {
+ // Assumes PG1 is already selected.
+ // If any of the transactions fails function returns false.
+ // Transmit PWM registers in 12 transfers of 16 bytes.
+ // g_twi_transfer_buffer[] is 20 bytes
+
+ // Iterate over the pwm_buffer contents at 16 byte intervals.
+ for (int i = 0; i < 192; i += 16) {
+ g_twi_transfer_buffer[0] = i;
+ // Copy the data from i to i+15.
+ // Device will auto-increment register for data after the first byte
+ // Thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer.
+ for (int j = 0; j < 16; j++) {
+ g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
+ }
+
+#if ISSI_PERSISTENCE > 0
+ for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+ if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) {
+ return false;
+ }
+ }
+#else
+ if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) {
+ return false;
+ }
+#endif
+ }
+ return true;
+}
+
+void IS31FL3733_init(uint8_t bus, uint8_t addr, uint8_t sync) {
+ // In order to avoid the LEDs being driven with garbage data
+ // in the LED driver's PWM registers, shutdown is enabled last.
+ // Set up the mode and other settings, clear the PWM registers,
+ // then disable software shutdown.
+ // Sync is passed so set it according to the datasheet.
+
+ // Unlock the command register.
+ IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+ // Select PG0
+ IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+ // Turn off all LEDs.
+ for (int i = 0x00; i <= 0x17; i++) {
+ IS31FL3733_write_register(bus, addr, i, 0x00);
+ }
+ // Unlock the command register.
+ IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+ // Select PG1
+ IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
+ // Set PWM on all LEDs to 0
+ // No need to setup Breath registers to PWM as that is the default.
+ for (int i = 0x00; i <= 0xBF; i++) {
+ IS31FL3733_write_register(bus, addr, i, 0x00);
+ }
+ // Unlock the command register.
+ IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+ // Select PG3
+ IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
+ // Set global current to maximum.
+ IS31FL3733_write_register(bus, addr, ISSI_REG_GLOBALCURRENT, 0xFF);
+ // Disable software shutdown.
+ IS31FL3733_write_register(bus, addr, ISSI_REG_CONFIGURATION, (sync << 6) | 0x01);
+ // Wait 10ms to ensure the device has woken up.
+ wait_ms(10);
+}
+
+void IS31FL3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
+ if (index >= 0 && index < DRIVER_LED_TOTAL) {
+ is31_led led = g_is31_leds[index];
+
+ g_pwm_buffer[led.driver][led.r] = red;
+ g_pwm_buffer[led.driver][led.g] = green;
+ g_pwm_buffer[led.driver][led.b] = blue;
+ g_pwm_buffer_update_required[led.driver] = true;
+ }
+}
+
+void IS31FL3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
+ for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+ IS31FL3733_set_color(i, red, green, blue);
+ }
+}
+
+void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
+ is31_led led = g_is31_leds[index];
+
+ uint8_t control_register_r = led.r / 8;
+ uint8_t control_register_g = led.g / 8;
+ uint8_t control_register_b = led.b / 8;
+ uint8_t bit_r = led.r % 8;
+ uint8_t bit_g = led.g % 8;
+ uint8_t bit_b = led.b % 8;
+
+ if (red) {
+ g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
+ } else {
+ g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
+ }
+ if (green) {
+ g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
+ } else {
+ g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
+ }
+ if (blue) {
+ g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
+ } else {
+ g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
+ }
+
+ g_led_control_registers_update_required[led.driver] = true;
+}
+
+void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
+ if (g_pwm_buffer_update_required[index]) {
+ // Firstly we need to unlock the command register and select PG1.
+ IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+ IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
+
+ // If any of the transactions fail we risk writing dirty PG0,
+ // refresh page 0 just in case.
+ if (!IS31FL3733_write_pwm_buffer(index, addr, g_pwm_buffer[index])) {
+ g_led_control_registers_update_required[index] = true;
+ }
+ }
+ g_pwm_buffer_update_required[index] = false;
+}
+
+void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index) {
+ if (g_led_control_registers_update_required[index]) {
+ // Firstly we need to unlock the command register and select PG0
+ IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+ IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+ for (int i = 0; i < 24; i++) {
+ IS31FL3733_write_register(index, addr, i, g_led_control_registers[index][i]);
+ }
+ }
+ g_led_control_registers_update_required[index] = false;
+}
diff --git a/keyboards/k_type/is31fl3733.h b/keyboards/k_type/is31fl3733.h
new file mode 100644
index 0000000000..272bcdc417
--- /dev/null
+++ b/keyboards/k_type/is31fl3733.h
@@ -0,0 +1,251 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+
+typedef struct is31_led {
+ uint8_t driver : 2;
+ uint8_t r;
+ uint8_t g;
+ uint8_t b;
+} __attribute__((packed)) is31_led;
+
+extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
+
+void IS31FL3733_init(uint8_t bus, uint8_t addr, uint8_t sync);
+bool IS31FL3733_write_register(uint8_t index, uint8_t addr, uint8_t reg, uint8_t data);
+bool IS31FL3733_write_pwm_buffer(uint8_t index, uint8_t addr, uint8_t *pwm_buffer);
+
+void IS31FL3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue);
+void IS31FL3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
+
+void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bool blue);
+
+// This should not be called from an interrupt
+// (eg. from a timer interrupt).
+// Call this while idle (in between matrix scans).
+// If the buffer is dirty, it will update the driver with the buffer.
+void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index); // index is the driver index
+void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index);
+
+#define A_1 0x00
+#define A_2 0x01
+#define A_3 0x02
+#define A_4 0x03
+#define A_5 0x04
+#define A_6 0x05
+#define A_7 0x06
+#define A_8 0x07
+#define A_9 0x08
+#define A_10 0x09
+#define A_11 0x0A
+#define A_12 0x0B
+#define A_13 0x0C
+#define A_14 0x0D
+#define A_15 0x0E
+#define A_16 0x0F
+
+#define B_1 0x10
+#define B_2 0x11
+#define B_3 0x12
+#define B_4 0x13
+#define B_5 0x14
+#define B_6 0x15
+#define B_7 0x16
+#define B_8 0x17
+#define B_9 0x18
+#define B_10 0x19
+#define B_11 0x1A
+#define B_12 0x1B
+#define B_13 0x1C
+#define B_14 0x1D
+#define B_15 0x1E
+#define B_16 0x1F
+
+#define C_1 0x20
+#define C_2 0x21
+#define C_3 0x22
+#define C_4 0x23
+#define C_5 0x24
+#define C_6 0x25
+#define C_7 0x26
+#define C_8 0x27
+#define C_9 0x28
+#define C_10 0x29
+#define C_11 0x2A
+#define C_12 0x2B
+#define C_13 0x2C
+#define C_14 0x2D
+#define C_15 0x2E
+#define C_16 0x2F
+
+#define D_1 0x30
+#define D_2 0x31
+#define D_3 0x32
+#define D_4 0x33
+#define D_5 0x34
+#define D_6 0x35
+#define D_7 0x36
+#define D_8 0x37
+#define D_9 0x38
+#define D_10 0x39
+#define D_11 0x3A
+#define D_12 0x3B
+#define D_13 0x3C
+#define D_14 0x3D
+#define D_15 0x3E
+#define D_16 0x3F
+
+#define E_1 0x40
+#define E_2 0x41
+#define E_3 0x42
+#define E_4 0x43
+#define E_5 0x44
+#define E_6 0x45
+#define E_7 0x46
+#define E_8 0x47
+#define E_9 0x48
+#define E_10 0x49
+#define E_11 0x4A
+#define E_12 0x4B
+#define E_13 0x4C
+#define E_14 0x4D
+#define E_15 0x4E
+#define E_16 0x4F
+
+#define F_1 0x50
+#define F_2 0x51
+#define F_3 0x52
+#define F_4 0x53
+#define F_5 0x54
+#define F_6 0x55
+#define F_7 0x56
+#define F_8 0x57
+#define F_9 0x58
+#define F_10 0x59
+#define F_11 0x5A
+#define F_12 0x5B
+#define F_13 0x5C
+#define F_14 0x5D
+#define F_15 0x5E
+#define F_16 0x5F
+
+#define G_1 0x60
+#define G_2 0x61
+#define G_3 0x62
+#define G_4 0x63
+#define G_5 0x64
+#define G_6 0x65
+#define G_7 0x66
+#define G_8 0x67
+#define G_9 0x68
+#define G_10 0x69
+#define G_11 0x6A
+#define G_12 0x6B
+#define G_13 0x6C
+#define G_14 0x6D
+#define G_15 0x6E
+#define G_16 0x6F
+
+#define H_1 0x70
+#define H_2 0x71
+#define H_3 0x72
+#define H_4 0x73
+#define H_5 0x74
+#define H_6 0x75
+#define H_7 0x76
+#define H_8 0x77
+#define H_9 0x78
+#define H_10 0x79
+#define H_11 0x7A
+#define H_12 0x7B
+#define H_13 0x7C
+#define H_14 0x7D
+#define H_15 0x7E
+#define H_16 0x7F
+
+#define I_1 0x80
+#define I_2 0x81
+#define I_3 0x82
+#define I_4 0x83
+#define I_5 0x84
+#define I_6 0x85
+#define I_7 0x86
+#define I_8 0x87
+#define I_9 0x88
+#define I_10 0x89
+#define I_11 0x8A
+#define I_12 0x8B
+#define I_13 0x8C
+#define I_14 0x8D
+#define I_15 0x8E
+#define I_16 0x8F
+
+#define J_1 0x90
+#define J_2 0x91
+#define J_3 0x92
+#define J_4 0x93
+#define J_5 0x94
+#define J_6 0x95
+#define J_7 0x96
+#define J_8 0x97
+#define J_9 0x98
+#define J_10 0x99
+#define J_11 0x9A
+#define J_12 0x9B
+#define J_13 0x9C
+#define J_14 0x9D
+#define J_15 0x9E
+#define J_16 0x9F
+
+#define K_1 0xA0
+#define K_2 0xA1
+#define K_3 0xA2
+#define K_4 0xA3
+#define K_5 0xA4
+#define K_6 0xA5
+#define K_7 0xA6
+#define K_8 0xA7
+#define K_9 0xA8
+#define K_10 0xA9
+#define K_11 0xAA
+#define K_12 0xAB
+#define K_13 0xAC
+#define K_14 0xAD
+#define K_15 0xAE
+#define K_16 0xAF
+
+#define L_1 0xB0
+#define L_2 0xB1
+#define L_3 0xB2
+#define L_4 0xB3
+#define L_5 0xB4
+#define L_6 0xB5
+#define L_7 0xB6
+#define L_8 0xB7
+#define L_9 0xB8
+#define L_10 0xB9
+#define L_11 0xBA
+#define L_12 0xBB
+#define L_13 0xBC
+#define L_14 0xBD
+#define L_15 0xBE
+#define L_16 0xBF
diff --git a/keyboards/k_type/k_type.c b/keyboards/k_type/k_type.c
index ae62f0e723..567ad28430 100644
--- a/keyboards/k_type/k_type.c
+++ b/keyboards/k_type/k_type.c
@@ -17,6 +17,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "k_type.h"
+#include "is31fl3733.h"
+
#ifdef RGB_MATRIX_ENABLE
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
{ 0, B_1, A_1, C_1 },
@@ -45,11 +47,11 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
{ 0, E_7, D_7, F_7 },
{ 0, E_8, D_8, F_8 },
{ 0, E_9, D_9, F_9 },
- { 0, E_10, D_1, F_10 },
- { 0, E_11, D_1, F_11 },
- { 0, E_12, D_1, F_12 },
- { 0, E_13, D_1, F_13 },
- { 0, E_14, D_1, F_14 },
+ { 0, E_10, D_10, F_10 },
+ { 0, E_11, D_11, F_11 },
+ { 0, E_12, D_12, F_12 },
+ { 0, E_13, D_13, F_13 },
+ { 0, E_14, D_14, F_14 },
{ 0, E_15, D_15, F_15 },
{ 0, E_16, D_16, F_16 },
@@ -62,11 +64,11 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
{ 0, H_7, G_7, I_7 },
{ 0, H_8, G_8, I_8 },
{ 0, H_9, G_9, I_9 },
- { 0, H_10, G_1, I_10 },
- { 0, H_11, G_1, I_11 },
- { 0, H_12, G_1, I_12 },
- { 0, H_13, G_1, I_13 },
- { 0, H_14, G_1, I_14 },
+ { 0, H_10, G_10, I_10 },
+ { 0, H_11, G_11, I_11 },
+ { 0, H_12, G_12, I_12 },
+ { 0, H_13, G_13, I_13 },
+ { 0, H_14, G_14, I_14 },
{ 0, H_15, G_15, I_15 },
{ 0, H_16, G_16, I_16 },
@@ -79,106 +81,123 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
{ 0, K_7, J_7, L_7 },
{ 0, K_8, J_8, L_8 },
{ 0, K_9, J_9, L_9 },
- { 0, K_10, J_1, L_10 },
- { 0, K_11, J_1, L_11 },
- { 0, K_12, J_1, L_12 },
- { 0, K_13, J_1, L_13 },
- { 0, K_14, J_1, L_14 },
+ { 0, K_10, J_10, L_10 },
+ { 0, K_11, J_11, L_11 },
+ { 0, K_12, J_12, L_12 },
+ { 0, K_13, J_13, L_13 },
+ { 0, K_14, J_14, L_14 },
{ 0, K_15, J_15, L_15 },
{ 0, K_16, J_16, L_16 },
// Driver 2 is on I2C2 - currently not usable with i2c_master
- //{ 1, B_1, A_1, C_1 },
- //{ 1, B_2, A_2, C_2 },
- //{ 1, B_3, A_3, C_3 },
- //{ 1, B_4, A_4, C_4 },
- //{ 1, B_5, A_5, C_5 },
- //{ 1, B_6, A_6, C_6 },
- //{ 1, B_7, A_7, C_7 },
- //{ 1, B_8, A_8, C_8 },
- //{ 1, B_9, A_9, C_9 },
- //{ 1, B_10, A_10, C_10 },
- //{ 1, B_11, A_11, C_11 },
- //{ 1, B_12, A_12, C_12 },
- //{ 1, B_13, A_13, C_13 },
- //{ 1, B_14, A_14, C_14 },
- //{ 1, B_15, A_15, C_15 },
- //{ 1, B_16, A_16, C_16 },
-
- //{ 1, E_1, D_1, F_1 },
- //{ 1, E_2, D_2, F_2 },
- //{ 1, E_3, D_3, F_3 },
- //{ 1, E_4, D_4, F_4 },
- //{ 1, E_5, D_5, F_5 },
- //{ 1, E_6, D_6, F_6 },
- //{ 1, E_7, D_7, F_7 },
- //{ 1, E_8, D_8, F_8 },
- //{ 1, E_9, D_9, F_9 },
- //{ 1, E_10, D_1, F_10 },
- //{ 1, E_11, D_1, F_11 },
- //{ 1, E_12, D_1, F_12 },
- //{ 1, E_13, D_1, F_13 },
- //{ 1, E_14, D_1, F_14 },
- //{ 1, E_15, D_15, F_15 },
- //{ 1, E_16, D_16, F_16 },
-
- //{ 1, H_1, G_1, I_1 },
- //{ 1, H_2, G_2, I_2 },
- //{ 1, H_3, G_3, I_3 },
- //{ 1, H_4, G_4, I_4 },
- //{ 1, H_5, G_5, I_5 },
- //{ 1, H_6, G_6, I_6 },
- //{ 1, H_7, G_7, I_7 },
- //{ 1, H_8, G_8, I_8 },
- //{ 1, H_9, G_9, I_9 },
- //{ 1, H_10, G_1, I_10 },
- //{ 1, H_11, G_1, I_11 },
- //{ 1, H_12, G_1, I_12 },
- //{ 1, H_13, G_1, I_13 },
- //{ 1, H_14, G_1, I_14 },
- //{ 1, H_15, G_15, I_15 },
- //{ 1, H_16, G_16, I_16 },
-
- //{ 1, K_1, J_1, L_1 },
- //{ 1, K_2, J_2, L_2 },
- //{ 1, K_3, J_3, L_3 },
- //{ 1, K_4, J_4, L_4 },
- //{ 1, K_5, J_5, L_5 },
- //{ 1, K_6, J_6, L_6 },
- //{ 1, K_7, J_7, L_7 }
+ { 1, B_1, A_1, C_1 },
+ { 1, B_2, A_2, C_2 },
+ { 1, B_3, A_3, C_3 },
+ { 1, B_4, A_4, C_4 },
+ { 1, B_5, A_5, C_5 },
+ { 1, B_6, A_6, C_6 },
+ { 1, B_7, A_7, C_7 },
+ { 1, B_8, A_8, C_8 },
+ { 1, B_9, A_9, C_9 },
+ { 1, B_10, A_10, C_10 },
+ { 1, B_11, A_11, C_11 },
+ { 1, B_12, A_12, C_12 },
+ { 1, B_13, A_13, C_13 },
+ { 1, B_14, A_14, C_14 },
+ { 1, B_15, A_15, C_15 },
+ { 1, B_16, A_16, C_16 },
+
+ { 1, E_1, D_1, F_1 },
+ { 1, E_2, D_2, F_2 },
+ { 1, E_3, D_3, F_3 },
+ { 1, E_4, D_4, F_4 },
+ { 1, E_5, D_5, F_5 },
+ { 1, E_6, D_6, F_6 },
+ { 1, E_7, D_7, F_7 },
+ { 1, E_8, D_8, F_8 },
+ { 1, E_9, D_9, F_9 },
+ { 1, E_10, D_10, F_10 },
+ { 1, E_11, D_11, F_11 },
+ { 1, E_12, D_12, F_12 },
+ { 1, E_13, D_13, F_13 },
+ { 1, E_14, D_14, F_14 },
+ { 1, E_15, D_15, F_15 },
+ { 1, E_16, D_16, F_16 },
+
+ { 1, H_1, G_1, I_1 },
+ { 1, H_2, G_2, I_2 },
+ { 1, H_3, G_3, I_3 },
+ { 1, H_4, G_4, I_4 },
+ { 1, H_5, G_5, I_5 },
+ { 1, H_6, G_6, I_6 },
+ { 1, H_7, G_7, I_7 },
+ { 1, H_8, G_8, I_8 },
+ { 1, H_9, G_9, I_9 },
+ { 1, H_10, G_10, I_10 },
+ { 1, H_11, G_11, I_11 },
+ { 1, H_12, G_12, I_12 },
+ { 1, H_13, G_13, I_13 },
+ { 1, H_14, G_14, I_14 },
+ { 1, H_15, G_15, I_15 },
+ { 1, H_16, G_16, I_16 },
+
+ { 1, K_1, J_1, L_1 },
+ { 1, K_2, J_2, L_2 },
+ { 1, K_3, J_3, L_3 },
+ { 1, K_4, J_4, L_4 },
+ { 1, K_5, J_5, L_5 },
+ { 1, K_6, J_6, L_6 },
+ { 1, K_7, J_7, L_7 }
};
led_config_t g_led_config = {
{
// Key Matrix to LED Index
- { 0, 10, 20, 29, 38, 47, 57, NO_LED, NO_LED, NO_LED },
- { 1, 11, 21, NO_LED, 39, 48, 58, NO_LED, NO_LED, NO_LED },
- { 2, 12, 22, 30, 40, 49, 59, NO_LED, NO_LED, NO_LED },
- { 3, 13, 23, 31, 41, 50, 60, NO_LED, NO_LED, NO_LED },
- { 4, 14, 24, 32, 42, 51, 61, NO_LED, NO_LED, NO_LED },
- { 5, 15, 25, 33, 43, 52, NO_LED, NO_LED, NO_LED, NO_LED },
- { 6, 16, 26, 34, 44, 53, 62, NO_LED, NO_LED, NO_LED },
- { 7, 17, 27, 35, 45, 54, NO_LED, NO_LED, NO_LED, NO_LED },
- { 8, 18, 28, 36, 46, 55, 63, NO_LED, NO_LED, NO_LED },
- { 9, 19, NO_LED, 37, NO_LED, 56, NO_LED, NO_LED, NO_LED, NO_LED }
+ { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 },
+ { 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 },
+ { 20, 21, 22, 23, 24, 25, 26, 27, 28, NO_LED },
+ { 29, NO_LED, 30, 31, 32, 33, 34, 35, 36, 37 },
+ { 38, 39, 40, 41, 42, 43, 44, 45, 46, NO_LED },
+ { 47, 48, 49, 50, 51, 52, 53, 54, 55, 56 },
+ { 57, 58, 59, 60, 61, NO_LED, 62, NO_LED, 63, NO_LED },
+ { 64, 65, 66, 67, 68, 69, 70, 71, 72, 73 },
+ { NO_LED, 74, NO_LED, 75, 76, 77, 78, 79, 80, 81 },
+ { 82, 83, 84, 85, 86, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED }