diff options
38 files changed, 4019 insertions, 0 deletions
diff --git a/keyboards/yosino58/config.h b/keyboards/yosino58/config.h new file mode 100644 index 0000000000..4357a218d4 --- /dev/null +++ b/keyboards/yosino58/config.h @@ -0,0 +1,34 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" +#include <serial_config.h> + +#define USE_I2C +#define USE_SERIAL + +#ifdef USE_Link_Time_Optimization + // LTO has issues with macros (action_get_macro) and "functions" (fn_actions), + // so just disable them + #define NO_ACTION_MACRO + #define NO_ACTION_FUNCTION + + #define DISABLE_LEADER +#endif // USE_Link_Time_Optimization diff --git a/keyboards/yosino58/i2c.c b/keyboards/yosino58/i2c.c new file mode 100644 index 0000000000..4bee5c6398 --- /dev/null +++ b/keyboards/yosino58/i2c.c @@ -0,0 +1,162 @@ +#include <util/twi.h> +#include <avr/io.h> +#include <stdlib.h> +#include <avr/interrupt.h> +#include <util/twi.h> +#include <stdbool.h> +#include "i2c.h" + +#ifdef USE_I2C + +// Limits the amount of we wait for any one i2c transaction. +// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is +// 9 bits, a single transaction will take around 90μs to complete. +// +// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit +// poll loop takes at least 8 clock cycles to execute +#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 + +#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) + +volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +static volatile uint8_t slave_buffer_pos; +static volatile bool slave_has_register_set = false; + +// Wait for an i2c operation to finish +inline static +void i2c_delay(void) { + uint16_t lim = 0; + while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT) + lim++; + + // easier way, but will wait slightly longer + // _delay_us(100); +} + +// Setup twi to run at 100kHz or 400kHz (see ./i2c.h SCL_CLOCK) +void i2c_master_init(void) { + // no prescaler + TWSR = 0; + // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10. + // Check datasheets for more info. + TWBR = ((F_CPU/SCL_CLOCK)-16)/2; +} + +// Start a transaction with the given i2c slave address. The direction of the +// transfer is set with I2C_READ and I2C_WRITE. +// returns: 0 => success +// 1 => error +uint8_t i2c_master_start(uint8_t address) { + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA); + + i2c_delay(); + + // check that we started successfully + if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START)) + return 1; + + TWDR = address; + TWCR = (1<<TWINT) | (1<<TWEN); + + i2c_delay(); + + if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) ) + return 1; // slave did not acknowledge + else + return 0; // success +} + + +// Finish the i2c transaction. +void i2c_master_stop(void) { + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); + + uint16_t lim = 0; + while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT) + lim++; +} + +// Write one byte to the i2c slave. +// returns 0 => slave ACK +// 1 => slave NACK +uint8_t i2c_master_write(uint8_t data) { + TWDR = data; + TWCR = (1<<TWINT) | (1<<TWEN); + + i2c_delay(); + + // check if the slave acknowledged us + return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1; +} + +// Read one byte from the i2c slave. If ack=1 the slave is acknowledged, +// if ack=0 the acknowledge bit is not set. +// returns: byte read from i2c device +uint8_t i2c_master_read(int ack) { + TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA); + + i2c_delay(); + return TWDR; +} + +void i2c_reset_state(void) { + TWCR = 0; +} + +void i2c_slave_init(uint8_t address) { + TWAR = address << 0; // slave i2c address + // TWEN - twi enable + // TWEA - enable address acknowledgement + // TWINT - twi interrupt flag + // TWIE - enable the twi interrupt + TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN); +} + +ISR(TWI_vect); + +ISR(TWI_vect) { + uint8_t ack = 1; + switch(TW_STATUS) { + case TW_SR_SLA_ACK: + // this device has been addressed as a slave receiver + slave_has_register_set = false; + break; + + case TW_SR_DATA_ACK: + // this device has received data as a slave receiver + // The first byte that we receive in this transaction sets the location + // of the read/write location of the slaves memory that it exposes over + // i2c. After that, bytes will be written at slave_buffer_pos, incrementing + // slave_buffer_pos after each write. + if(!slave_has_register_set) { + slave_buffer_pos = TWDR; + // don't acknowledge the master if this memory loctaion is out of bounds + if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) { + ack = 0; + slave_buffer_pos = 0; + } + slave_has_register_set = true; + } else { + i2c_slave_buffer[slave_buffer_pos] = TWDR; + BUFFER_POS_INC(); + } + break; + + case TW_ST_SLA_ACK: + case TW_ST_DATA_ACK: + // master has addressed this device as a slave transmitter and is + // requesting data. + TWDR = i2c_slave_buffer[slave_buffer_pos]; + BUFFER_POS_INC(); + break; + + case TW_BUS_ERROR: // something went wrong, reset twi state + TWCR = 0; + default: + break; + } + // Reset everything, so we are ready for the next TWI interrupt + TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN); +} +#endif diff --git a/keyboards/yosino58/i2c.h b/keyboards/yosino58/i2c.h new file mode 100644 index 0000000000..710662c7ab --- /dev/null +++ b/keyboards/yosino58/i2c.h @@ -0,0 +1,46 @@ +#pragma once + +#include <stdint.h> + +#ifndef F_CPU +#define F_CPU 16000000UL +#endif + +#define I2C_READ 1 +#define I2C_WRITE 0 + +#define I2C_ACK 1 +#define I2C_NACK 0 + +#define SLAVE_BUFFER_SIZE 0x10 + +// i2c SCL clock frequency 400kHz +#define SCL_CLOCK 400000L + +extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +void i2c_master_init(void); +uint8_t i2c_master_start(uint8_t address); +void i2c_master_stop(void); +uint8_t i2c_master_write(uint8_t data); +uint8_t i2c_master_read(int); +void i2c_reset_state(void); +void i2c_slave_init(uint8_t address); + + +static inline unsigned char i2c_start_read(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_READ); +} + +static inline unsigned char i2c_start_write(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_WRITE); +} + +// from SSD1306 scrips +extern unsigned char i2c_rep_start(unsigned char addr); +extern void i2c_start_wait(unsigned char addr); +extern unsigned char i2c_readAck(void); +extern unsigned char i2c_readNak(void); +extern unsigned char i2c_read(unsigned char ack); + +#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); diff --git a/keyboards/yosino58/info.json b/keyboards/yosino58/info.json new file mode 100644 index 0000000000..c591a41dec --- /dev/null +++ b/keyboards/yosino58/info.json @@ -0,0 +1,20 @@ +{ + "keyboard_name": "yosino58 rev. 1", + "url": "https://github.com/sakurachari/yosino58", + "maintainer": "sakuranbo0046", + "width": 16.75, + "height": 6.25, + "layouts": { + "LAYOUT": { + "key_count": 58, + "layout": [ + {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":0.25}, {"x":3, "y":0}, {"x":4, "y":0.25}, {"x":5, "y":0.5}, {"x":10.75, "y":0.5}, {"x":11.75, "y":0.25}, {"x":12.75, "y":0}, {"x":13.75, "y":0.25}, {"x":14.75, "y":1}, {"x":15.75, "y":1}, + {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":1.25}, {"x":3, "y":1}, {"x":4, "y":1.25}, {"x":5, "y":1.5}, {"x":10.75, "y":1.5}, {"x":11.75, "y":1.25}, {"x":12.75, "y":1}, {"x":13.75, "y":1.25}, {"x":14.75, "y":2}, {"x":15.75, "y":2}, + {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":2.25}, {"x":3, "y":2}, {"x":4, "y":2.25}, {"x":5, "y":2.5}, {"x":10.75, "y":2.5}, {"x":11.75, "y":2.25}, {"x":12.75, "y":2}, {"x":13.75, "y":2.25}, {"x":14.75, "y":3}, {"x":15.75, "y":3}, + {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":3.25}, {"x":3, "y":3}, {"x":4, "y":3.25}, {"x":5, "y":3.5}, {"x":6.5, "y":4.25}, {"x":7.5, "y":4.25, "h":2}, {"x":8.5, "y":4.25, "h":2}, {"x":9.5, "y":4.25}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.25}, {"x":12.75, "y":3}, {"x":13.75, "y":3.25}, {"x":14.75, "y":4}, {"x":15.75, "y":4}, + {"x":3.75, "y":4.25}, {"x":4.75, "y":4.5}, {"x":6.5, "y":5.25}, {"x":9.5, "y":5.25}, {"x":11, "y":4.5}, {"x":12, "y":4.25} + ] + } + } +} + diff --git a/keyboards/yosino58/keymaps/default/config.h b/keyboards/yosino58/keymaps/default/config.h new file mode 100644 index 0000000000..21fc2d3b54 --- /dev/null +++ b/keyboards/yosino58/keymaps/default/config.h @@ -0,0 +1,43 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +//#define USE_MATRIX_I2C + +/* Select hand configuration */ + +#define MASTER_LEFT +// #define MASTER_RIGHT +// #define EE_HANDS + +#define SSD1306OLED +// #define SSD1306_128X64 + +#define TAPPING_FORCE_HOLD +#define TAPPING_TERM 100 + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 12 +#define RGBLIGHT_LIMIT_VAL 120 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17
\ No newline at end of file diff --git a/keyboards/yosino58/keymaps/default/keymap.c b/keyboards/yosino58/keymaps/default/keymap.c new file mode 100644 index 0000000000..79b5075696 --- /dev/null +++ b/keyboards/yosino58/keymaps/default/keymap.c @@ -0,0 +1,337 @@ +#include QMK_KEYBOARD_H +#ifdef PROTOCOL_LUFA + #include "lufa.h" + #include "split_util.h" +#endif +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif + +extern keymap_config_t keymap_config; + +#ifdef RGBLIGHT_ENABLE +//Following line allows macro to read current RGB settings +extern rgblight_config_t rgblight_config; +#endif + +extern uint8_t is_master; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _LOWER 1 +#define _RAISE 2 +#define _ADJUST 3 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + ADJUST, + RGBRST +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* QWERTY + * ,-----------------------------------------. ,-----------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | | Y | U | I | O | P | = | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |LShift| A | S | D | F | G | | H | J | K | L | ; | ' | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |LCTRL | Z | X | C | V | B |-------.-------. ,---------------| N | M | , | . | / | \ | + * `-----------------------------------------/ Del / / \ \ Bksp \----------------------------------------' + * | LAlt |ADJUST| /-------/ Space / \ Enter \-------\ | [ | ] | + * | | |/ LOWER / / \ \ RAISE \ | | | + * `-----------------------------' '------------------------------' + */ + [_QWERTY] = LAYOUT( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_EQL, \ + KC_LSFT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LCTRL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, \ + KC_LALT, ADJUST, LOWER, RAISE, KC_LBRC, KC_RBRC\ + ), + +/* LOWER + * ,-----------------------------------------. ,-----------------------------------------. + * | ESC | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F11 | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Tab | / | - | 7 | 8 | 9 | | ! | @ | # | $ | % | F12 | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |LShift| * | + | 4 | 5 | 6 | | ^ | & | * | ( | ) | - | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |LCTRL | . | 0 | 1 | 2 | 3 |-------.-------. ,---------------| | _ | + | { | } | | | + * `-----------------------------------------/ F11 / / \ \ F12 \----------------------------------------' + * | LAlt | LGUI | /-------/ Space / \ Enter \-------\ | Caps | Num | + * | | |/ LOWER / / \ \ \ | | | + * `-----------------------------' '------------------------------' + */ + [_LOWER] = LAYOUT( \ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, \ + _______, KC_PSLS, KC_PMNS, KC_P7, KC_P8, KC_P9, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_F12, \ + _______, KC_PAST, KC_PPLS, KC_P4, KC_P5, KC_P6, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_TILD, \ + _______, KC_PDOT, KC_P0, KC_P1, KC_P2, KC_P3, _______, _______, _______, _______, XXXXXXX, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + _______, KC_LGUI, _______, XXXXXXX, KC_CLCK, KC_NLCK\ + + ), + +/* RAISE + * ,-----------------------------------------. ,-----------------------------------------. + * | | | | | | | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | F1 | F2 | F3 | F4 | F5 | F6 | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | F7 | F8 | F9 | F10 | F11 | F12 |-------.-------. ,---------------| | | | | | | + * `-----------------------------------------/ / / \ \ \----------------------------------------' + * | | | /-------/ Space / \ Enter \-------\ | | | + * | | |/ / / \ \ RAISE \ | | | + * `-----------------------------' '------------------------------' + */ + [_RAISE] = LAYOUT( \ + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ + XXXXXXX, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, XXXXXXX, \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, XXXXXXX, KC_UP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \ + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, _______, _______, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, XXXXXXX, \ + XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX \ + ), + +/* ADJUST + * ,-----------------------------------------. ,-----------------------------------------. + * |RESET | | | | | | | Mute | Vol+ | Play | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | PSCR | SLCK | Pause| | Prev | Vol- | Next | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | |Insert| Home |PageUP| | | |RGB ON| HUE+ | SAT+ | VAL+ | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | Del | End |PageDN|-------.-------. ,---------------| |RGB Re| MODE | HUE- | SAT- | VAL- | + * `-----------------------------------------/ / / \ \ \----------------------------------------' + * | |ADJUST| /-------/ Space / \ Enter \-------\ | | | + * | | |/ / / \ \ \ | | | + * `-----------------------------' '------------------------------' + */ + [_ADJUST] = LAYOUT( \ + RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MUTE, KC_VOLU, KC_MPLY, XXXXXXX, XXXXXXX, XXXXXXX, \ + XXXXXXX, XXXXXXX, XXXXXXX, KC_PSCR, KC_SLCK, KC_PAUS, KC_MPRV, KC_VOLD, KC_MNXT, XXXXXXX, XXXXXXX, XXXXXXX, \ + XXXXXXX, XXXXXXX, XXXXXXX, KC_INS, KC_HOME, KC_PGUP, XXXXXXX, XXXXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ + XXXXXXX, XXXXXXX, XXXXXXX, KC_DEL, KC_END, KC_PGDN, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, RGBRST, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, \ + XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX \ + ) +}; + + +int RGB_current_mode; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +// Setting ADJUST layer RGB back to default +void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + layer_on(layer3); + } else { + layer_off(layer3); + } +} + +void matrix_init_user(void) { + #ifdef RGBLIGHT_ENABLE + RGB_current_mode = rgblight_config.mode; + #endif + //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h + #ifdef SSD1306OLED + #ifdef SSD1306_128X64 + iota_gfx_init(false); // turns on the display + #else + iota_gfx_init(!has_usb()); // turns on the display + #endif + #endif +} + +//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h +#ifdef SSD1306OLED + +//assign the right code to your layers for OLED display +#define L_QWERTY 0 +#define L_LOWER 2 +#define L_RAISE 4 +#define L_ADJUST 8 + +// When add source files to SRC in rules.mk, you can use functions. +const char *read_logo(void); + +void matrix_scan_user(void) { + iota_gfx_task(); +} + +void matrix_render_user(struct CharacterMatrix *matrix) { + if (is_master) { + static char indctr[2][20][5]= + { + // white icon + { + {0x80,0x81,0x82,0x83,0}, + {0x88,0x89,0x8A,0x8B,0}, + {0x90,0x91,0x92,0x93,0}, + {0x98,0x99,0x9A,0x9B,0}, + {0x01,0x02,0x03,0x04,0}, + {0xA0,0xA1,0xA2,0xA3,0}, + {0xA8,0xA9,0xAA,0xAB,0}, + {0xB0,0xB1,0xB2,0xB3,0}, + {0xB8,0xB9,0xBA,0xBB,0}, + {0x21,0x22,0x23,0x24,0}, + {0xC0,0xC1,0xC2,0xC3,0}, + {0xC8,0xC9,0xCA,0xCB,0}, + {0xD0,0xD1,0xD2,0xD3,0}, + {0xD8,0xD9,0xDA,0xDB,0}, + {0x41,0x42,0x43,0x44,0}, + {0xE0,0xE1,0xE2,0xE3,0}, + {0xE8,0xE9,0xEA,0xEB,0}, + {0xF0,0xF1,0xF2,0xF3,0}, + {0xF8,0xF9,0xFA,0xFB,0}, + {0x61,0x62,0x63,0x64,0} + }, + // Black icon + { + {0x84,0x85,0x86,0x87,0}, + {0x8C,0x8D,0x8E,0x8F,0}, + {0x94,0x95,0x96,0x97,0}, + {0x9C,0x9D,0x9E,0x9F,0}, + {0x05,0x06,0x07,0x08,0}, + {0xA4,0xA5,0xA6,0xA7,0}, + {0xAC,0xAD,0xAE,0xAF,0}, + {0xB4,0xB5,0xB6,0xB7,0}, + {0xBC,0xBD,0xBE,0xBF,0}, + {0x25,0x26,0x27,0x28,0}, + {0xC4,0xC5,0xC6,0xC7,0}, + {0xCC,0xCD,0xCE,0xCF,0}, + {0xD4,0xD5,0xD6,0xD7,0}, + {0xDC,0xDD,0xDE,0xDF,0}, + {0x45,0x46,0x47,0x48,0}, + {0xE4,0xE5,0xE6,0xE7,0}, + {0xEC,0xED,0xEE,0xEF,0}, + {0xF4,0xF5,0xF6,0xF7,0}, + {0xFC,0xFD,0xFE,0xFF,0}, + {0x65,0x66,0x67,0x68,0} + } + }; + + int rown = 0; + int rowc = 0; + int rowl = 0; + int rowr = 0; + int rowa = 0; + + //Set Indicator icon + if (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) { rown = 1; } else { rown = 0; } + if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) { rowc = 1; } else { rowc = 0; } + if (layer_state == L_LOWER) { rowl = 1; } + if (layer_state == L_RAISE) { rowr = 1; } + if (layer_state == L_ADJUST) { rowa = 1; } + + matrix_write(matrix, indctr[rowl] [0]); + matrix_write(matrix, indctr[rowr] [1]); + matrix_write(matrix, indctr[rowa] [2]); + matrix_write(matrix, indctr[rowc] [3]); + matrix_write(matrix, indctr[rown] [4]); + matrix_write_char(matrix, 0x13); + matrix_write(matrix, indctr[rowl] [5]); + matrix_write(matrix, indctr[rowr] [6]); + matrix_write(matrix, indctr[rowa] [7]); + matrix_write(matrix, indctr[rowc] [8]); + matrix_write(matrix, indctr[rown] [9]); + matrix_write_char(matrix, 0x13); + matrix_write(matrix, indctr[rowl] [10]); + matrix_write(matrix, indctr[rowr] [11]); + matrix_write(matrix, indctr[rowa] [12]); + matrix_write(matrix, indctr[rowc] [13]); + matrix_write(matrix, indctr[rown] [14]); + matrix_write_char(matrix, 0x13); + matrix_write(matrix, indctr[rowl] [15]); + matrix_write(matrix, indctr[rowr] [16]); + matrix_write(matrix, indctr[rowa] [17]); + matrix_write(matrix, indctr[rowc] [18]); + matrix_write(matrix, indctr[rown] [19]); + + }else{ + matrix_write(matrix, read_logo()); + } +} + +void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +void iota_gfx_task_user(void) { + struct CharacterMatrix matrix; + matrix_clear(&matrix); + matrix_render_user(&matrix); + matrix_update(&display, &matrix); +} +#endif//SSD1306OLED + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + persistent_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + } else { + layer_off(_LOWER); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + } else { + layer_off(_RAISE); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + case RGB_MOD: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + #endif + return false; + break; + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + RGB_current_mode = rgblight_config.mode; + } + #endif + break; + } + return true; +} + diff --git a/keyboards/yosino58/keymaps/default/rules.mk b/keyboards/yosino58/keymaps/default/rules.mk new file mode 100644 index 0000000000..131f5e1f8a --- /dev/null +++ b/keyboards/yosino58/keymaps/default/rules.mk @@ -0,0 +1,30 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no |