diff options
| -rw-r--r-- | keyboards/mt40/config.h | 207 | ||||
| -rw-r--r-- | keyboards/mt40/i2c.c | 104 | ||||
| -rw-r--r-- | keyboards/mt40/i2c.h | 25 | ||||
| -rw-r--r-- | keyboards/mt40/keymaps/default/keymap.c | 84 | ||||
| -rw-r--r-- | keyboards/mt40/keymaps/default/readme.md | 17 | ||||
| -rw-r--r-- | keyboards/mt40/matrix.c | 106 | ||||
| -rw-r--r-- | keyboards/mt40/mt40.c | 43 | ||||
| -rw-r--r-- | keyboards/mt40/mt40.h | 87 | ||||
| -rwxr-xr-x | keyboards/mt40/program | 74 | ||||
| -rw-r--r-- | keyboards/mt40/readme.md | 16 | ||||
| -rw-r--r-- | keyboards/mt40/rules.mk | 36 | ||||
| -rw-r--r-- | keyboards/mt40/usbconfig.h | 396 |
12 files changed, 1195 insertions, 0 deletions
diff --git a/keyboards/mt40/config.h b/keyboards/mt40/config.h new file mode 100644 index 0000000000..394cc78981 --- /dev/null +++ b/keyboards/mt40/config.h @@ -0,0 +1,207 @@ +/* +Copyright 2017 REPLACE_WITH_YOUR_NAME + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x20A0 +#define PRODUCT_ID 0x422D + +#define DEVICE_VER 0x0001 + +#define MANUFACTURER ThomasDehaeze +#define PRODUCT mt40 + +#define DESCRIPTION A Planck clone + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 15 + +#define RGB_DI_PIN C0 +#define RGBLED_NUM 12 +#define RGBLIGHT_ANIMATIONS + +#define RGBLIGHT_HUE_STEP 12 +#define RGBLIGHT_SAT_STEP 15 +#define RGBLIGHT_VAL_STEP 18 + +#define NO_UART 1 +#define BOOTLOADHID_BOOTLOADER 1 + +#define TAPPING_TERM 200 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +/* #define CC6 0x63 // C3 */ +/* #define CB6 0x37 // B7 */ +/* #define CC7 0x62 // C2 */ + +#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 } +#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C2, C3, C4, C5, C6, C7, D7 } +/* #define UNUSED_PINS */ + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +/* #define DIODE_DIRECTION COL2ROW */ + +#define BACKLIGHT_PIN D2 + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +/* #define DEBOUNCING_DELAY 5 */ + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +/* #define LOCKING_SUPPORT_ENABLE */ +/* Locking resynchronize hack */ +/* #define LOCKING_RESYNC_ENABLE */ + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +#endif diff --git a/keyboards/mt40/i2c.c b/keyboards/mt40/i2c.c new file mode 100644 index 0000000000..c27f3e3d17 --- /dev/null +++ b/keyboards/mt40/i2c.c @@ -0,0 +1,104 @@ +/* +Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <avr/io.h> +#include <util/twi.h> + +#include "i2c.h" + +void i2c_set_bitrate(uint16_t bitrate_khz) { + uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); + if (bitrate_div >= 16) { + bitrate_div = (bitrate_div - 16) / 2; + } + TWBR = bitrate_div; +} + +void i2c_init(void) { + // set pull-up resistors on I2C bus pins + PORTC |= 0b11; + + i2c_set_bitrate(400); + + // enable TWI (two-wire interface) + TWCR |= (1 << TWEN); + + // enable TWI interrupt and slave address ACK + TWCR |= (1 << TWIE); + TWCR |= (1 << TWEA); +} + +uint8_t i2c_start(uint8_t address) { + // reset TWI control register + TWCR = 0; + + // begin transmission and wait for it to end + TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN); + while (!(TWCR & (1<<TWINT))); + + // check if the start condition was successfully transmitted + if ((TWSR & 0xF8) != TW_START) { + return 1; + } + + // transmit address and wait + TWDR = address; + TWCR = (1<<TWINT) | (1<<TWEN); + while (!(TWCR & (1<<TWINT))); + + // check if the device has acknowledged the READ / WRITE mode + uint8_t twst = TW_STATUS & 0xF8; + if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) { + return 1; + } + + return 0; +} + +void i2c_stop(void) { + TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); +} + +uint8_t i2c_write(uint8_t data) { + TWDR = data; + + // transmit data and wait + TWCR = (1<<TWINT) | (1<<TWEN); + while (!(TWCR & (1<<TWINT))); + + if ((TWSR & 0xF8) != TW_MT_DATA_ACK) { + return 1; + } + + return 0; +} + +uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) { + if (i2c_start(address)) { + return 1; + } + + for (uint16_t i = 0; i < length; i++) { + if (i2c_write(data[i])) { + return 1; + } + } + + i2c_stop(); + + return 0; +} diff --git a/keyboards/mt40/i2c.h b/keyboards/mt40/i2c.h new file mode 100644 index 0000000000..27c9d3d050 --- /dev/null +++ b/keyboards/mt40/i2c.h @@ -0,0 +1,25 @@ +/* +Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef __I2C_H__ +#define __I2C_H__ + +void i2c_init(void); +void i2c_set_bitrate(uint16_t bitrate_khz); +uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); + +#endif diff --git a/keyboards/mt40/keymaps/default/keymap.c b/keyboards/mt40/keymaps/default/keymap.c new file mode 100644 index 0000000000..2da5dd6458 --- /dev/null +++ b/keyboards/mt40/keymaps/default/keymap.c @@ -0,0 +1,84 @@ +/* Copyright 2017 REPLACE_WITH_YOUR_NAME + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "mt40.h" +#include "action_layer.h" +#include "rgblight.h" + +#define _______ KC_TRNS +#define OOOOOOO KC_TRNS + +#define C_LCTL MT(MOD_LCTL, KC_QUOT) +#define C_RCTL MT(MOD_RCTL, KC_GRV) + +#define C_LGUI MT(MOD_LGUI, KC_LBRC) +#define C_RGUI MT(MOD_RGUI, KC_RBRC) + +#define C_ESC MT(MOD_LCTL, KC_ESC) +#define C_ENT MT(MOD_RCTL, KC_ENT) + + +/* + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | SPC | BSP |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = KEYMAP( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + C_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, C_ENT, \ + KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, \ + C_LCTL, C_LGUI, MOD_LALT, MO(3), MO(1), KC_SPC, KC_SPC, MO(2), MO(4), MOD_RALT, C_RGUI, C_RCTL), + + [1] = KEYMAP( + _______, KC_F9, KC_F10, KC_F11, KC_F12, RGB_TOG, RGB_MOD, KC_P7, KC_P8, KC_P9, KC_PSLS, _______, \ + _______, KC_F5, KC_F6, KC_F7, KC_F8, RGB_VAD, RGB_VAI, KC_P4, KC_P5, KC_P6, KC_PAST, _______, \ + _______, KC_F1, KC_F2, KC_F3, KC_F4, BL_TOGG, BL_INC, KC_P1, KC_P2, KC_P3, KC_PMNS, KC_PGUP, \ + _______, _______, _______, _______, OOOOOOO, _______, _______, KC_P0, KC_PDOT, KC_PENT, KC_PPLS, KC_PGDN), + + [2] = KEYMAP( + _______, _______, _______, _______, _______, _______, _______, KC_QUOT, KC_EQL, KC_LBRC, KC_RBRC, KC_NUBS, \ + KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, OOOOOOO, KC_HOME, KC_PGDOWN, KC_PGUP, KC_END), + + [3] = KEYMAP( + _______, _______, _______, _______, _______, _______, KC_COPY, KC_PGUP, _______, _______, KC_PASTE, KC_DEL, \ + _______, _______, _______, KC_PGDN, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, _______, _______, \ + _______, _______, KC_CUT, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, OOOOOOO, _______, _______, _______, _______, _______, _______, _______, _______), + + [4] = KEYMAP( + _______, _______, _______, _______, _______, _______, _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, \ + KC_PSCR, KC_INS, KC_MUTE, KC_VOLD, KC_VOLU, _______, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, _______, _______, \ + KC_CAPS, _______, KC_MPLY, KC_MRWD, KC_MFFD, _______, _______, _______, KC_BTN1, KC_BTN2, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, OOOOOOO, _______, _______, _______), + + +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), + [1] = ACTION_LAYER_MOMENTARY(2), + [2] = ACTION_LAYER_MOMENTARY(3), + [3] = ACTION_LAYER_MOMENTARY(4), +}; + diff --git a/keyboards/mt40/keymaps/default/readme.md b/keyboards/mt40/keymaps/default/readme.md new file mode 100644 index 0000000000..033b75fa29 --- /dev/null +++ b/keyboards/mt40/keymaps/default/readme.md @@ -0,0 +1,17 @@ +# Default Layout on a Planck Clone Keyboard + +## Base Layer +[Imgur](https://i.imgur.com/XivfDS0.png) + +## FN1 Layer - Numpad and Function keys +[Imgur](https://i.imgur.com/sXTYfAn.png) + +## FN2 Layer - Numbers and Symbols +[Imgur](https://i.imgur.com/Z4Nqp7g.png) + +## FN3 Layer - Vim +[Imgur](https://i.imgur.com/5whRGOx.png) + +## FN3 Layer - Multimedia +[Imgur](https://i.imgur.com/K0jfHIO.png) + diff --git a/keyboards/mt40/matrix.c b/keyboards/mt40/matrix.c new file mode 100644 index 0000000000..140026013f --- /dev/null +++ b/keyboards/mt40/matrix.c @@ -0,0 +1,106 @@ +/* +Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <avr/io.h> +#include <util/delay.h> + +#include "matrix.h" + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif + +static uint8_t debouncing = DEBOUNCE; + +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +void matrix_init(void) { + // all outputs for rows high + DDRB = 0xFF; + PORTB = 0xFF; + // all inputs for columns + DDRA = 0x00; + DDRC &= ~(0x111111<<2); + DDRD &= ~(1<<PIND7); + // all columns are pulled-up + PORTA = 0xFF; + PORTC |= (0b111111<<2); + PORTD |= (1<<PIND7); + + // initialize matrix state: all keys off + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + matrix[row] = 0x00; + matrix_debouncing[row] = 0x00; + } +} + +void matrix_set_row_status(uint8_t row) { + DDRB = (1 << row); + PORTB = ~(1 << row); +} + +uint8_t bit_reverse(uint8_t x) { + x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa); + x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc); + x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0); + return x; +} + +uint8_t matrix_scan(void) { + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + matrix_set_row_status(row); + _delay_us(5); + + matrix_row_t cols = ( + // cols 0..7, PORTA 0 -> 7 + (~PINA) & 0xFF + ) | ( + // cols 8..13, PORTC 7 -> 0 + bit_reverse((~PINC) & 0xFF) << 8 + ) | ( + // col 14, PORTD 7 + ((~PIND) & (1 << PIND7)) << 7 + ); + + if (matrix_debouncing[row] != cols) { + matrix_debouncing[row] = cols; + debouncing = DEBOUNCE; + } + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = matrix_debouncing[i]; + } + } + } + + matrix_scan_user(); + + return 1; +} + +inline matrix_row_t matrix_get_row(uint8_t row) { + return matrix[row]; +} + +void matrix_print(void) { +} diff --git a/keyboards/mt40/mt40.c b/keyboards/mt40/mt40.c new file mode 100644 index 0000000000..0e7a30d99f --- /dev/null +++ b/keyboards/mt40/mt40.c @@ -0,0 +1,43 @@ +/* Copyright 2017 REPLACE_WITH_YOUR_NAME + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "mt40.h" +#include "rgblight.h" + +#include <avr/pgmspace.h> + +#include "action_layer.h" +#include "i2c.h" +#include "quantum.h" + +extern rgblight_config_t rgblight_config; + +void rgblight_set(void) { + if (!rgblight_config.enable) { + for (uint8_t i = 0; i < RGBLED_NUM; i++) { + led[i].r = 0; + led[i].g = 0; + led[i].b = 0; + } + } + + i2c_init(); + i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM); +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { + rgblight_task(); +} diff --git a/keyboards/mt40/mt40.h b/keyboards/mt40/mt40.h new file mode 100644 index 0000000000..18cefd827b --- /dev/null +++ b/keyboards/mt40/mt40.h @@ -0,0 +1,87 @@ +/* Copyright 2017 REPLACE_WITH_YOUR_NAME + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef MT40_H +#define MT40_H + +#include "quantum_keycodes.h" +#include "keycode.h" +#include "action.h" + +// This a shortcut to help you visually see your layout. +// The following is an example using the Planck MIT layout +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B \ +) { \ + { K31, K32, K33, KC_NO, K34, K35, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K37, KC_NO, KC_NO, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, KC_NO, KC_NO, KC_NO, KC_NO, K2A, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { K30, K11, K12, K13, K14, K15, KC_NO, KC_NO, KC_NO, KC_NO, K1A, K1B, KC_NO, KC_NO, KC_NO }, \ + { K10, K01, K02, K03, K04, K05, KC_NO, KC_NO, KC_NO, KC_NO, K0A, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { K00, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K0B }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, KC_NO, K06, K16, K26, K36, K38, K3A, K39, K3B, KC_NO, KC_NO, K07, K17, K27 }, \ + { KC_NO, KC_NO, K09, K19, K29, KC_NO, K2B, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K08, K18, K28 } \ +} + +/* #define KC_KEYMAP( \ */ +/* k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ */ +/* k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ */ +/* k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ */ +/* k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ */ +/* ) \ */ +/* { \ */ +/* { KC_##k31, KC_##k32, KC_##k33, KC_NO, KC_##k34, KC_##k35, KC_NO, KC_NO, KC_NO, KC_NO, KC_##k37, KC_NO, KC_NO, KC_NO, KC_NO }, \ */ +/* { KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##k2a, KC_NO, KC_NO, KC_NO }, \ */ +/* { KC_##k30, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15, KC_NO, KC_NO, KC_NO, KC_NO, KC_##k1b, KC_##k1a, KC_NO, KC_NO, KC_NO }, \ */ +/* { KC_##k10, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##k0a, KC_NO, KC_NO, KC_NO }, \ */ +/* { KC_##k00, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##k0b }, \ */ +/* { KC_NO, KC_NO, KC_##k06, KC_##k16, KC_##k26, KC_##k36, KC_##k38, KC_##k3a, KC_##k17, KC_##k07, KC_NO, KC_NO, KC_##k3b, KC_##k39, KC_##k27 } \ */ +/* { KC_NO, KC_NO, KC_##k09, KC_##k19, KC_##k29, KC_NO, KC_NO, KC_##k2b, KC_##k18, KC_##k08, KC_NO, KC_NO, KC_NO, KC_NO, KC_##k28 } \ */ +/* } */ + +/* #define FR_A KC_A */ +/* #define FR_B KC_B */ +/* #define FR_C KC_C */ +/* #define FR_D KC_D */ +/* #define FR_E KC_E */ +/* #define FR_F KC_F */ +/* #define FR_G KC_G */ +/* #define FR_H KC_H */ +/* #define FR_I KC_I */ +/* #define FR_J KC_J */ +/* #define FR_K KC_K */ +/* #define FR_L KC_L */ +/* #define FR_M KC_M */ +/* #define FR_N KC_N */ +/* #define FR_O KC_O */ +/* #define FR_P KC_P */ +/* #define FR_Q KC_Q */ +/* #define FR_R KC_R */ +/* #define FR_S KC_S */ +/* #define FR_T KC_T */ +/* #define FR_U KC_U */ +/* #define FR_V KC_V */ +/* #define FR_W KC_W */ +/* #define FR_X KC_X */ +/* #define FR_Y KC_Y */ +/* #define FR_Z KC_Z */ + + +#endif diff --git a/keyboards/mt40/program b/keyboards/mt40/program new file mode 100755 index 0000000000..e8786f566d --- /dev/null +++ b/keyboards/mt40/program @@ -0,0 +1,74 @@ +#!/usr/bin/env python2.7 +# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +from __future__ import print_function + +import os +import sys +import time +import usb + +if len(sys.argv) < 2: + print('Usage: %s <firmware.hex>' % sys.argv[0]) + sys.exit(1) + +print('Searching for planck clone keyboard... ', end='') + +dev = usb.core.find(idVendor=0x20A0, idProduct=0x422D) +if dev is None: + raise ValueError('Device not found') + +print('Found', end='\n\n') + +print('Device Information:') +print(' idVendor: %d (0x%04x)' % (dev.idVendor, dev.idVendor)) +print(' idProduct: %d (0x%04x)' % (dev.idProduct, dev.idProduct)) +print('Manufacturer: %s' % (dev.iManufacturer)) +print('Serial: %s' % (dev.iSerialNumber)) +print('Product: %s' % (dev.iProduct), end='\n\n') + +print('Transferring control to bootloader... ', end='') + +dev.set_configuration() + +request_type = usb.util.build_request_type( + usb.util.CTRL_OUT, + usb.util.CTRL_TYPE_CLASS, + usb.util.CTRL_RECIPIENT_DEVICE) + +USBRQ_HID_SET_REPORT = 0x09 +HID_REPORT_OPTION = 0x0301 + + +try: + dev.ctrl_transfer( + request_type, + USBRQ_HID_SET_REPORT, + HID_REPORT_OPTION, + 0, + [0, 0, 0xFF] + [0] * 5 + ) +except usb.core.USBError: + # for some reason I keep getting USBError, but it works! + pass + +# wait a bit until bootloader starts up +time.sleep(2) + +print('OK') +print('Programming...') +if os.system('bootloadHID -r "%s"' % sys.argv[1]) == 0: + print('\nDone!') diff --git a/keyboards/mt40/readme.md b/keyboards/mt40/readme.md new file mode 100644 index 0000000000..aba5fa0d0c --- /dev/null +++ b/keyboards/mt40/readme.md @@ -0,0 +1,16 @@ +# MT40: An 40% Ortholinear Keyboard + +## Program + +`make mt40:default:program` + +## Pictures + +[PCB](https://i.imgur.com/8BeeY07.jpg) +[Backview of the PCB](https://i.imgur.com/0opsDkt.jpg) +[Board with Sleeve](https://i.imgur.com/44FhPU8.jpg) + +## Buy + +https://world.taobao.com/item/548335974877.htm?fromSite=main&spm=a312a.7700824.w4002-6810221593.51.670e68a08mRh69 + diff --git a/keyboards/mt40/rules.mk b/keyboards/mt40/rules.mk new file mode 100644 index 0000000000..10023da0ee --- /dev/null +++ b/keyboards/mt40/rules.mk @@ -0,0 +1,36 @@ +# MCU name +MCU = atmega32a +PROTOCOL = VUSB + +# unsupported features for now +NO_UART = yes +NO_SUSPEND_POWER_DOWN = yes + +# processor frequency +F_CPU = 12000000 + +# build options +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ # nkro-doesnt-work +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_CUSTOM_DRIVER = yes +TAP_DANCE_ENABLE = no + +OPT_DEFS = -DDEBUG_LEVEL=0 +OPT_DEFS += -DBOOTLOADER_SIZE=2048 + +# custom matrix setup +CUSTOM_MATRIX = yes +SRC = matrix.c i2c.c + +# programming options +PROGRAM_CMD = ./keyboards/mt40/program $(TARGET).hex diff --git a/keyboards/mt40/usbconfig.h b/keyboards/mt40/usbconfig.h new file mode 100644 index 0000000000..498b01fd9e --- /dev/null +++ b/keyboards/mt40/usbconfig.h @@ -0,0 +1,396 @@ +/* Name: usbconfig.h + * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers + * Author: Christian Starkjohann + * Creation Date: 2005-04-01 + * Tabsize: 4 + * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH + * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) + * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ + */ + +#ifndef __usbconfig_h_included__ +#define __usbconfig_h_included__ + +#include "config.h" + +/* +General Description: +This file is an example configuration (with inline documentation) for the USB +driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is +also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may +wire the lines to any other port, as long as D+ is also wired to INT0 (or any +other hardware interrupt, as long as it is the highest level interrupt, see +section at the end of this file). +*/ + +/* ---------------------------- Hardware Config ---------------------------- */ + +#define USB_CFG_IOPORTNAME D +/* This is the port where the USB bus is connected. When you configure it to + * "B", the registers PORTB, PINB and DDRB will be used. + */ +#define USB_CFG_DMINUS_BIT 3 +/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected. + * This may be any bit in the port. + */ +#define USB_CFG_DPLUS_BIT 2 +/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected. + * This may be any bit in the port. Please note that D+ must also be connected + * to interrupt pin INT0! [You can also use other interrupts, see section + * "Optional MCU Description" below, or you can connect D- to the interrupt, as + * it is required if you use the USB_COUNT_SOF feature. If you use D- for the + * interrupt, the USB interrupt will also be triggered at Start-Of-Frame + * markers every millisecond.] + */ +#define USB_CFG_CLOCK_KHZ (F_CPU/1000) +/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000, + * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code + * require no crystal, they tolerate +/- 1% deviation from the nominal + * frequency. All other rates require a precision of 2000 ppm and thus a + * crystal! + * Since F_CPU should be defined to your actual clock rate anyway, you should + * not need to modify this setting. + */ +#define USB_CFG_CHECK_CRC 0 +/* Define this to 1 if you want that the driver checks integrity of incoming + * data packets (CRC checks). CRC checks cost quite a bit of code size and are + * currently only available for 18 MHz crystal clock. You must choose + * USB_CFG_CLOCK_KHZ = 18000 if you enable this option. + */ + +/* ----------------------- Optional Hardware Config ------------------------ */ + +/* #define USB_CFG_PULLUP_IOPORTNAME D */ +/* If you connect the 1.5k pullup resistor from D- to a port pin instead of + * V+, you can connect and disconnect the device from firmware by calling + * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h). + * This constant defines the port on which the pullup resistor is connected. + */ +/* #define USB_CFG_PULLUP_BIT 4 */ +/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined + * above) where the 1.5k pullup resistor is connected. See description + * above for details. + */ + +/* --------------------------- Functional Range ---------------------------- */ + +#define USB_CFG_HAVE_INTRIN_ENDPOINT 1 +/* Define this to 1 if you want to compile a version with two endpoints: The + * default control endpoint 0 and an interrupt-in endpoint (any other endpoint + * number). + */ +#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1 +/* Define this to 1 if you want to compile a version with three endpoints: The + * default control endpoint 0, an interrupt-in endpoint 3 (or the number + * configured below) and a catch-all default interrupt-in endpoint as above. + * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature. + */ +#define USB_CFG_EP3_NUMBER 3 +/* If the so-called endpoint 3 is used, it can now be configured to any other + * endpoint number (except 0) with this macro. Default if undefined is 3. + */ +/* #d |