diff options
| -rw-r--r-- | keyboards/tokyo60/config.h | 66 | ||||
| -rw-r--r-- | keyboards/tokyo60/keymaps/default/config.h | 1 | ||||
| -rw-r--r-- | keyboards/tokyo60/keymaps/default/keymap.c | 56 | ||||
| -rw-r--r-- | keyboards/tokyo60/readme.md | 15 | ||||
| -rw-r--r-- | keyboards/tokyo60/rules.mk | 75 | ||||
| -rw-r--r-- | keyboards/tokyo60/tokyo60.c | 19 | ||||
| -rw-r--r-- | keyboards/tokyo60/tokyo60.h | 21 |
7 files changed, 253 insertions, 0 deletions
diff --git a/keyboards/tokyo60/config.h b/keyboards/tokyo60/config.h new file mode 100644 index 0000000000..6e6ab2215d --- /dev/null +++ b/keyboards/tokyo60/config.h @@ -0,0 +1,66 @@ +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Tokyo Keyboard +#define PRODUCT tokyo60 +#define DESCRIPTION q.m.k. keyboard firmware for tokyo60 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* number of backlight levels */ +#define BACKLIGHT_PIN B7 +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 6 +//#define BACKLIGHT_ON_STATE 1 +#endif + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* Set power consumption to work with mobile devices */ +#define USB_MAX_POWER_CONSUMPTION 100 + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* key matrix pins */ +#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } +#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B2, B5, B4, D7, D6, B3 } +#define UNUSED_PINS + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* prevent stuck modifiers */ +#define PREVENT_STUCK_MODIFIERS + +#define RGB_DI_PIN F7 +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 10 +#define RGBLIGHT_HUE_STEP 12 +#define RGBLIGHT_SAT_STEP 12 +#define RGBLIGHT_VAL_STEP 12 +#endif + +/* For Production */ +#define QMK_ESC_OUTPUT F0 // usually COL +#define QMK_ESC_INPUT D0 // usually ROW + +#endif diff --git a/keyboards/tokyo60/keymaps/default/config.h b/keyboards/tokyo60/keymaps/default/config.h new file mode 100644 index 0000000000..a5568e400d --- /dev/null +++ b/keyboards/tokyo60/keymaps/default/config.h @@ -0,0 +1 @@ +#include "../../config.h" diff --git a/keyboards/tokyo60/keymaps/default/keymap.c b/keyboards/tokyo60/keymaps/default/keymap.c new file mode 100644 index 0000000000..64b49a7465 --- /dev/null +++ b/keyboards/tokyo60/keymaps/default/keymap.c @@ -0,0 +1,56 @@ +#include "tokyo60.h" + +/* + * Default HHKB Layout + */ +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: Default layer +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ +│ Esc │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ \ │ ` │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │BkSpc│█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│Ctrl │ A │ S │ D │ F │ G │ H │ J │ K │ L │ Fn3 │ ' │█████│Enter│█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│Shift│█████│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │█████│Shift│ Fn │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│█████│ Gui │ Alt │█████│█████│Space│█████│█████│█████│█████│█████│ Alt │ Gui │█████│█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + TOKYO_KEYMAP( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_FN0, \ + KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT ), + /* 1: HHKB Fn layer +┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ +│ Pwr │ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │ Ins │ Del │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│Caps │ RGB │RGBfw│RGBrv│BLtog│BLstp│ │ │ Psc │ Slk │ Pus │ Up │ │ │█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │ VoD │ VoU │ Mut │ Ejc │ │NP_* │NP_/ │Home │PgUp │Left │Right│█████│NPEnt│█████│ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│ │█████│ │ │ │ │ │NP_+ │NP_- │ End │PgDwn│Down │█████│ │ │ +├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ +│█████│ │ │█████│█████│█████│ │█████│█████│█████│█████│ │ │█████│█████│ +└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘ + */ + TOKYO_KEYMAP( + KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + KC_CAPS, RGB_TOG, RGB_MOD, RGB_RMOD, BL_TOGG, BL_STEP, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_PENT, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), +}; + +/*5 + * Fn action definition + */ +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), +}; + +void matrix_scan_user(void) { + +}; diff --git a/keyboards/tokyo60/readme.md b/keyboards/tokyo60/readme.md new file mode 100644 index 0000000000..811d0707c8 --- /dev/null +++ b/keyboards/tokyo60/readme.md @@ -0,0 +1,15 @@ +# tokyo60 + + + +Minimal hacker style mechanical keyboard designed in Tokyo. Full aluminum hi-pro construction with integrated top-plate. Cherry MX compatible. [More Info at Tokyo Keyboard](http://tokyokeyboard.com). + +Keyboard Maintainer: [tokyo keyboard](http://tokyokeyboard.com) +Hardware Supported: tokyo60 rev1 +Hardware Availability: [tokyo keyboard](http://tokyokeyboard.com), [Massdrop](https://www.massdrop.com/buy/massdrop-x-tokyo-keyboard-tokyo60-keyboard-kit?mode=guest_open) + +Make example for this keyboard (after setting up your build environment): + + make tokyo60:default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/tokyo60/rules.mk b/keyboards/tokyo60/rules.mk new file mode 100644 index 0000000000..7f8cfc0a83 --- /dev/null +++ b/keyboards/tokyo60/rules.mk @@ -0,0 +1,75 @@ + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +MIDI_ENABLE = no # MIDI controls +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable RGB light diff --git a/keyboards/tokyo60/tokyo60.c b/keyboards/tokyo60/tokyo60.c new file mode 100644 index 0000000000..d3b6279df4 --- /dev/null +++ b/keyboards/tokyo60/tokyo60.c @@ -0,0 +1,19 @@ +#include "tokyo60.h" +//#include "led.h" + +void matrix_init_kb(void) { + // Keyboard start-up code goes here + // Runs once when the firmware starts up + matrix_init_user(); + led_init_ports(); +}; + +void matrix_scan_kb(void) { + // Looping keyboard code goes here + // This runs every cycle (a lot) + matrix_scan_user(); +}; + +void led_init_ports(void) { + /* LEDs on */ +} diff --git a/keyboards/tokyo60/tokyo60.h b/keyboards/tokyo60/tokyo60.h new file mode 100644 index 0000000000..e3cfa711ba --- /dev/null +++ b/keyboards/tokyo60/tokyo60.h @@ -0,0 +1,21 @@ +#ifndef TOKYO60_H +#define TOKYO60_H + +#include "quantum.h" + +/* tokyo60 Keymap*/ +#define TOKYO_KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K1D,\ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K3D, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K4D, \ + K42, K43, K46, K4B, K4C \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { KC_NO, K42, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K4B, K4C, K4D } \ +} + +#endif |