diff options
| -rw-r--r-- | keyboards/helix/rev2/keymaps/five_rows_jis/keymap.c | 130 | ||||
| -rw-r--r-- | keyboards/helix/rev2/keymaps/five_rows_jis/rules.mk | 9 |
2 files changed, 118 insertions, 21 deletions
diff --git a/keyboards/helix/rev2/keymaps/five_rows_jis/keymap.c b/keyboards/helix/rev2/keymaps/five_rows_jis/keymap.c index a22a4b1663..24b2a59012 100644 --- a/keyboards/helix/rev2/keymaps/five_rows_jis/keymap.c +++ b/keyboards/helix/rev2/keymaps/five_rows_jis/keymap.c @@ -1,10 +1,7 @@ #include QMK_KEYBOARD_H #include "keymap_jp.h" -#include "bootloader.h" -#ifdef PROTOCOL_LUFA -#include "lufa.h" -#include "split_util.h" -#endif +#include <stdio.h> +#include <string.h> #ifdef SSD1306OLED #include "ssd1306.h" #endif @@ -15,15 +12,6 @@ // * If you want to use the Kana key you can enable this comment out. However, the binary size may be over. * // #define KANA_ENABLE -extern keymap_config_t keymap_config; - -#ifdef RGBLIGHT_ENABLE -//Following line allows macro to read current RGB settings -extern rgblight_config_t rgblight_config; -#endif - -extern uint8_t is_master; - // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. // Layer names don't all need to be of the same length, obviously, and you can also skip them @@ -209,7 +197,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { #error "undefined keymaps" #endif -#ifdef SSD1306OLED +#if defined(SSD1306OLED) || defined(OLED_ENABLE) char keylog[24] = {}; const char code_to_name[60] = { ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', @@ -266,7 +254,7 @@ void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { #endif bool process_record_user(uint16_t keycode, keyrecord_t *record) { - #ifdef SSD1306OLED + #if defined(SSD1306OLED) || defined(OLED_ENABLE) if (record->event.pressed) { set_keylog(keycode, record); } @@ -279,7 +267,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { if (record->event.pressed) { rgblight_mode(RGB_current_mode); rgblight_step(); - RGB_current_mode = rgblight_config.mode; + RGB_current_mode = rgblight_get_mode(); } break; #endif @@ -312,7 +300,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { if (record->event.pressed) { eeconfig_update_rgblight_default(); rgblight_enable(); - RGB_current_mode = rgblight_config.mode; + RGB_current_mode = rgblight_get_mode(); } break; #endif @@ -325,7 +313,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { void matrix_init_user(void) { #ifdef RGBLIGHT_ENABLE - RGB_current_mode = rgblight_config.mode; + RGB_current_mode = rgblight_get_mode(); #endif //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h #ifdef SSD1306OLED @@ -431,7 +419,7 @@ void iota_gfx_task_user(void) { #endif matrix_clear(&matrix); - if (is_master) { + if (is_keyboard_master()) { render_status(&matrix); } else { render_logo(&matrix); @@ -440,4 +428,104 @@ void iota_gfx_task_user(void) { matrix_update(&display, &matrix); } -#endif +#endif // end of SSD1306OLED + +//OLED update loop +#ifdef OLED_ENABLE +oled_rotation_t oled_init_user(oled_rotation_t rotation) { + if (is_keyboard_master()) { + return OLED_ROTATION_0; + } else { + return OLED_ROTATION_180; + } +} + +//assign the right code to your layers for OLED display +#define L_BASE _BASE +#define L_LOWER (1<<_LOWER) +#define L_RAISE (1<<_RAISE) +#define L_ADJUST (1<<_ADJUST) +#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER) +#define L_LOW_E (1<<_LOW_E) +#define L_RAI_E (1<<_RAI_E) +#define L_ADJUST_TRIE (L_ADJUST|L_RAI_E|L_LOW_E) + +const char helix_logo[]={ + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, + 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, + 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, + 0}; + +static inline void render_logo(void) { + oled_write(helix_logo, false); +} + +const char mac_win_logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; + +static inline void render_status(void) { + char buf[20]; + // Render to mode icon + if(keymap_config.swap_lalt_lgui==false){ + oled_write(mac_win_logo[0][0], false); + oled_write_P(PSTR("\n"), false); + oled_write(mac_win_logo[0][1], false); + } else { + oled_write(mac_win_logo[1][0], false); + oled_write_P(PSTR("\n"), false); + oled_write(mac_win_logo[1][1], false); + } + + #ifdef RGBLIGHT_ENABLE + snprintf(buf, sizeof(buf), " LED mode:%d", (short)RGB_current_mode); + oled_write(buf, false); + #endif + + // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below + oled_write_P(PSTR("\nLayer: "), false); + switch (layer_state) { + case L_BASE: + oled_write_P(default_layer_state == (1UL<<_BAS_E) ? PSTR("BaseEx") : PSTR("Base"), false); + break; + case L_RAISE: + oled_write_P(PSTR("Raise"), false); + break; + case L_RAI_E: + oled_write_P(PSTR("RaiseEx"), false); + break; + case L_LOWER: + oled_write_P(PSTR("Lower"), false); + break; + case L_LOW_E: + oled_write_P(PSTR("LowerEx"), false); + break; + case L_ADJUST: + case L_ADJUST_TRI: + case L_ADJUST_TRIE: + oled_write_P(PSTR("Adjust"), false); + break; + default: + snprintf(buf, sizeof(buf), "%d", (short)layer_state); + oled_write(buf, false); + } + + oled_write(keylog, false); +} + +bool oled_task_user(void) { + +# if DEBUG_TO_SCREEN + if (debug_enable) { + return; + } +# endif + + if (is_keyboard_master()) { + render_status(); + } else { + render_logo(); + } + + return false; +} + +#endif // end of OLED_ENABLE diff --git a/keyboards/helix/rev2/keymaps/five_rows_jis/rules.mk b/keyboards/helix/rev2/keymaps/five_rows_jis/rules.mk index 3ef6f82366..6300137fd6 100644 --- a/keyboards/helix/rev2/keymaps/five_rows_jis/rules.mk +++ b/keyboards/helix/rev2/keymaps/five_rows_jis/rules.mk @@ -1,4 +1,5 @@ LTO_ENABLE = no # if firmware size over limit, try this option +SPLIT_KEYBOARD = yes # Helix Spacific Build Options # you can uncomment and edit follows 7 Variables @@ -10,3 +11,11 @@ HELIX_ROWS = 5 # Helix Rows is 4 or 5 # LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.) # LED_ANIMATIONS = yes # LED animations # IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) + +# OLED_ENABLE が yes のとき +# OLED_SELECT が core ならば QMK 標準の oled_dirver.c を使用します。 +# OLED_SELECT が core 以外ならば従来どおり helix/local_drivers/ssd1306.c を使用します。 +# If OLED_ENABLE is 'yes' +# If OLED_SELECT is 'core', use QMK standard oled_dirver.c. +# If OLED_SELECT is other than 'core', use helix/local_drivers/ssd1306.c. +OLED_SELECT = core |