diff options
| -rw-r--r-- | docs/faq_build.md | 2 | ||||
| -rw-r--r-- | docs/getting_started_make_guide.md | 22 |
2 files changed, 20 insertions, 4 deletions
diff --git a/docs/faq_build.md b/docs/faq_build.md index e64c035332..e4e69b912d 100644 --- a/docs/faq_build.md +++ b/docs/faq_build.md @@ -17,7 +17,7 @@ or just: Note that running `make` with `sudo` is generally ***not*** a good idea, and you should use one of the former methods, if possible. -### Linux `udev` Rules +### Linux `udev` Rules :id=linux-udev-rules On Linux, you'll need proper privileges to communicate with the bootloader device. You can either use `sudo` when flashing firmware (not recommended), or place [this file](https://github.com/qmk/qmk_firmware/tree/master/util/udev/50-qmk.rules) into `/etc/udev/rules.d/`. diff --git a/docs/getting_started_make_guide.md b/docs/getting_started_make_guide.md index a89dc73d01..ad63a1c2ec 100644 --- a/docs/getting_started_make_guide.md +++ b/docs/getting_started_make_guide.md @@ -14,16 +14,32 @@ The full syntax of the `make` command is `<keyboard_folder>:<keymap>:<target>`, The `<target>` means the following * If no target is given, then it's the same as `all` below * `all` compiles as many keyboard/revision/keymap combinations as specified. For example, `make planck/rev4:default` will generate a single .hex, while `make planck/rev4:all` will generate a hex for every keymap available to the planck. -* `flash`, `dfu`, `teensy`, `avrdude`, `dfu-util`, or `bootloadHID` compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it's `dfu`, but for ChibiOS keyboards you should use `dfu-util`, and `teensy` for standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme. - * **Note**: some operating systems need root access for these commands to work, so in that case you need to run for example `sudo make planck/rev4:default:flash`. +* `flash`, `dfu`, `teensy`, `avrdude`, `dfu-util`, or `bootloadHID` compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it's `dfu`, but for ChibiOS keyboards you should use `dfu-util`, and `teensy` for standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme. + Visit the [Flashing Firmware](flashing.md) guide for more details of the available bootloaders. + * **Note**: some operating systems need privileged access for these commands to work. This means that you may need to setup [`udev rules`](faq_build.md#linux-udev-rules) to access these without root access, or to run the command with root access (`sudo make planck/rev4:default:flash`). * `clean`, cleans the build output folders to make sure that everything is built from scratch. Run this before normal compilation if you have some unexplainable problems. +* `distclean` removes .hex files and .bin files. + +The following targets are for developers: + +* `show-path` shows the path of the source and object files. +* `dump-vars` dumps the makefile variable. +* `objs-size` displays the size of individual object files. +* `show_build_options` shows the options set in 'rules.mk'. +* `check-md5` displays the md5 checksum of the generated binary file. You can also add extra options at the end of the make command line, after the target * `make COLOR=false` - turns off color output * `make SILENT=true` - turns off output besides errors/warnings * `make VERBOSE=true` - outputs all of the gcc stuff (not interesting, unless you need to debug) -* `make EXTRAFLAGS=-E` - Preprocess the code without doing any compiling (useful if you are trying to debug #define commands) +* `make VERBOSE_LD_CMD=yes` - execute the ld command with the -v option. +* `make VERBOSE_AS_CMD=yes` - execute the as command with the -v option. +* `make VERBOSE_C_CMD=<c_source_file>` - add the -v option when compiling the specified C source file. +* `make DUMP_C_MACROS=<c_source_file>` - dump preprocessor macros when compiling the specified C source file. +* `make DUMP_C_MACROS=<c_source_file> > <logfile>` - dump preprocessor macros to `<logfile>` when compiling the specified C source file. +* `make VERBOSE_C_INCLUDE=<c_source_file>` - dumps the file names to be included when compiling the specified C source file. +* `make VERBOSE_C_INCLUDE=<c_source_file> 2> <logfile>` - dumps the file names to be included to `<logfile>` when compiling the specified C source file. The make command itself also has some additional options, type `make --help` for more information. The most useful is probably `-jx`, which specifies that you want to compile using more than one CPU, the `x` represents the number of CPUs that you want to use. Setting that can greatly reduce the compile times, especially if you are compiling many keyboards/keymaps. I usually set it to one less than the number of CPUs that I have, so that I have some left for doing other things while it's compiling. Note that not all operating systems and make versions supports that option. |