diff options
33 files changed, 2459 insertions, 0 deletions
diff --git a/keyboards/annepro2/annepro2.c b/keyboards/annepro2/annepro2.c new file mode 100644 index 0000000000..37489defff --- /dev/null +++ b/keyboards/annepro2/annepro2.c @@ -0,0 +1,202 @@ +/* Copyright 2021 OpenAnnePro community + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "hal.h" +#include "annepro2.h" +#include "annepro2_ble.h" +#include "spi_master.h" +#include "ap2_led.h" +#include "protocol.h" + +#define RAM_MAGIC_LOCATION 0x20001ffc +#define IAP_MAGIC_VALUE 0x0000fab2 + +static const SerialConfig ledUartInitConfig = { + .speed = 115200, +}; + +#ifndef LED_UART_BAUD_RATE +# define LED_UART_BAUD_RATE 115200 +#endif // LED_UART_BAUD_RATE + +static const SerialConfig ledUartRuntimeConfig = { + .speed = LED_UART_BAUD_RATE, +}; + +static const SerialConfig bleUartConfig = { + .speed = 115200, +}; + +static uint8_t ledMcuWakeup[11] = {0x7b, 0x10, 0x43, 0x10, 0x03, 0x00, 0x00, 0x7d, 0x02, 0x01, 0x02}; + +ble_capslock_t BLECapsLock = {._dummy = {0}, .caps_lock = false}; + +void bootloader_jump(void) { + // Send msg to shine to boot into IAP + annepro2SetIAP(); + + // wait for shine to boot into IAP + wait_ms(15); + + // Load ble into IAP + annepro2_ble_bootload(); + wait_ms(15); + + // Magic key to set keyboard to IAP + // It’s from reversing original boot loader + // If value is that it stays in boot loader aka IAP + *((uint32_t *)RAM_MAGIC_LOCATION) = IAP_MAGIC_VALUE; + + // Load the main MCU into IAP + __disable_irq(); + NVIC_SystemReset(); +} + +void keyboard_pre_init_kb(void) { + // Start LED UART + sdStart(&SD0, &ledUartInitConfig); + /* Let the LED chip settle a bit before switching the mode. + * That helped at least one person. */ + wait_ms(15); + sdWrite(&SD0, ledMcuWakeup, sizeof(ledMcuWakeup)); + + // wait to receive response from wakeup + wait_ms(15); + + protoInit(&proto, ledCommandCallback); + + // loop to clear out receive buffer from shine wakeup + while (!sdGetWouldBlock(&SD0)) sdGet(&SD0); + + sdStart(&SD0, &ledUartRuntimeConfig); + keyboard_pre_init_user(); +} + +void keyboard_post_init_kb(void) { + // Start BLE UART + sdStart(&SD1, &bleUartConfig); + annepro2_ble_startup(); + + // Give the send uart thread some time to + // send out the queue before we read back + wait_ms(100); + + // loop to clear out receive buffer from ble wakeup + while (!sdGetWouldBlock(&SD1)) sdGet(&SD1); + + annepro2LedGetStatus(); + + keyboard_post_init_user(); +} + +void matrix_scan_kb() { + // if there's stuff on the ble serial buffer + // read it into the capslock struct + while (!sdGetWouldBlock(&SD1)) { + sdReadTimeout(&SD1, (uint8_t *)&BLECapsLock, sizeof(ble_capslock_t), 10); + } + + /* While there's data from LED keyboard sent - read it. */ + while (!sdGetWouldBlock(&SD0)) { + uint8_t byte = sdGet(&SD0); + protoConsume(&proto, byte); + } + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { + if (annepro2LedStatus.matrixEnabled && annepro2LedStatus.isReactive) { + annepro2LedForwardKeypress(record->event.key.row, record->event.key.col); + } + + const annepro2Led_t blue = { + .p.blue = 0xff, + .p.red = 0x00, + .p.green = 0x00, + .p.alpha = 0xff, + }; + + switch (keycode) { + case KC_AP2_BT1: + annepro2_ble_broadcast(0); + /* FIXME: This hardcodes col/row position */ + annepro2LedBlink(0, 1, blue, 8, 50); + return false; + + case KC_AP2_BT2: + annepro2_ble_broadcast(1); + annepro2LedBlink(0, 2, blue, 8, 50); + return false; + + case KC_AP2_BT3: + annepro2_ble_broadcast(2); + annepro2LedBlink(0, 3, blue, 8, 50); + return false; + + case KC_AP2_BT4: + annepro2_ble_broadcast(3); + annepro2LedBlink(0, 4, blue, 8, 50); + return false; + + case KC_AP2_USB: + annepro2_ble_disconnect(); + return false; + + case KC_AP2_BT_UNPAIR: + annepro2_ble_unpair(); + return false; + + case KC_AP_LED_OFF: + annepro2LedDisable(); + break; + + case KC_AP_LED_ON: + if (annepro2LedStatus.matrixEnabled) { + annepro2LedNextProfile(); + } else { + annepro2LedEnable(); + } + annepro2LedResetForegroundColor(); + break; + + case KC_AP_LED_NEXT_PROFILE: + annepro2LedNextProfile(); + annepro2LedResetForegroundColor(); + break; + + case KC_AP_LED_PREV_PROFILE: + annepro2LedPrevProfile(); + annepro2LedResetForegroundColor(); + break; + + case KC_AP_LED_NEXT_INTENSITY: + annepro2LedNextIntensity(); + annepro2LedResetForegroundColor(); + return false; + + case KC_AP_LED_SPEED: + annepro2LedNextAnimationSpeed(); + annepro2LedResetForegroundColor(); + return false; + + default: + break; + } + } + return process_record_user(keycode, record); +} diff --git a/keyboards/annepro2/annepro2.h b/keyboards/annepro2/annepro2.h new file mode 100644 index 0000000000..b08f8c5352 --- /dev/null +++ b/keyboards/annepro2/annepro2.h @@ -0,0 +1,65 @@ +/* + * Copyright (c) 2018 Yaotian Feng + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once +#include "quantum.h" +#include <stdint.h> +#include "ap2_led.h" + +typedef struct __attribute__((__packed__)) { + uint8_t _dummy[10]; + bool caps_lock; +} ble_capslock_t; +extern ble_capslock_t BLECapsLock; + +// Matrix keymap +// clang-format off +#define LAYOUT( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \ + K40, K42, K43, K46, K49, K4A, K4B, K4C \ +) { \ + /* COL1 COL2 COL3 COL4 COL5 COL6 COL7 COL8 COL9 COL10 COL11 COL12 COL13 COL14*/ \ + /* ROW1 */ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + /* ROW2 */ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + /* ROW3 */ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO}, \ + /* ROW4 */ { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO}, \ + /* ROW5 */ { K40, KC_NO, K42, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, K49, K4A, K4B, K4C, KC_NO}, \ +} +// clang-format on + +enum AP2KeyCodes { + KC_AP2_BT1 = SAFE_RANGE, + KC_AP2_BT2, + KC_AP2_BT3, + KC_AP2_BT4, + KC_AP2_BT_UNPAIR, + KC_AP2_USB, + KC_AP_LED_ON, + KC_AP_LED_OFF, + KC_AP_LED_NEXT_PROFILE, + KC_AP_LED_PREV_PROFILE, + KC_AP_LED_NEXT_INTENSITY, + KC_AP_LED_SPEED, + AP2_SAFE_RANGE, +}; + +#undef SAFE_RANGE +#define SAFE_RANGE AP2_SAFE_RANGE + diff --git a/keyboards/annepro2/annepro2_ble.c b/keyboards/annepro2/annepro2_ble.c new file mode 100644 index 0000000000..72cbb68016 --- /dev/null +++ b/keyboards/annepro2/annepro2_ble.c @@ -0,0 +1,170 @@ +/* + Copyright (C) 2020 Yaotian Feng, Codetector<codetector@codetector.cn> + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "annepro2_ble.h" +#include "ch.h" +#include "hal.h" +#include "host.h" +#include "host_driver.h" +#include "report.h" + +/* -------------------- Static Function Prototypes -------------------------- */ +static uint8_t ap2_ble_leds(void); +static void ap2_ble_mouse(report_mouse_t *report); +static void ap2_ble_system(uint16_t data); +static void ap2_ble_consumer(uint16_t data); +static void ap2_ble_keyboard(report_keyboard_t *report); + +static void ap2_ble_swtich_ble_driver(void); + +/* -------------------- Static Local Variables ------------------------------ */ +static host_driver_t ap2_ble_driver = { + ap2_ble_leds, ap2_ble_keyboard, ap2_ble_mouse, ap2_ble_system, ap2_ble_consumer, +}; + +static uint8_t bleMcuWakeup[11] = {0x7b, 0x12, 0x53, 0x00, 0x03, 0x00, 0x01, 0x7d, 0x02, 0x01, 0x02}; + +static uint8_t bleMcuStartBroadcast[11] = { + 0x7b, 0x12, 0x53, 0x00, 0x03, 0x00, 0x00, 0x7d, 0x40, 0x01, 0x00 // Broadcast ID[0-3] +}; + +static uint8_t bleMcuConnect[11] = { + 0x7b, 0x12, 0x53, 0x00, 0x03, 0x00, 0x00, 0x7d, 0x40, 0x04, 0x00 // Connect ID [0-3] +}; + +static uint8_t bleMcuSendReport[10] = { + 0x7b, 0x12, 0x53, 0x00, 0x0A, 0x00, 0x00, 0x7d, 0x10, 0x04, +}; + +static uint8_t bleMcuSendConsumerReport[10] = { + 0x7b, 0x12, 0x53, 0x00, 0x06, 0x00, 0x00, 0x7d, 0x10, 0x08, +}; + +static uint8_t bleMcuUnpair[10] = { + 0x7b, 0x12, 0x53, 0x00, 0x02, 0x00, 0x00, 0x7d, 0x40, 0x05, +}; + +static uint8_t bleMcuBootload[11] = {0x7b, 0x10, 0x51, 0x10, 0x03, 0x00, 0x00, 0x7d, 0x02, 0x01, 0x01}; + +static host_driver_t *lastHostDriver = NULL; +#ifdef NKRO_ENABLE +static bool lastNkroStatus = false; +#endif // NKRO_ENABLE + +/* -------------------- Public Function Implementation ---------------------- */ + +void annepro2_ble_bootload(void) { sdWrite(&SD1, bleMcuBootload, sizeof(bleMcuBootload)); } + +void annepro2_ble_startup(void) { sdWrite(&SD1, bleMcuWakeup, sizeof(bleMcuWakeup)); } + +void annepro2_ble_broadcast(uint8_t port) { + if (port > 3) { + port = 3; + } + // sdPut(&SD1, 0x00); + sdWrite(&SD1, bleMcuStartBroadcast, sizeof(bleMcuStartBroadcast)); + sdPut(&SD1, port); + static int lastBroadcast = -1; + if (lastBroadcast == port) { + annepro2_ble_connect(port); + } + lastBroadcast = port; +} + +void annepro2_ble_connect(uint8_t port) { + if (port > 3) { + port = 3; + } + sdWrite(&SD1, bleMcuConnect, sizeof(bleMcuConnect)); + sdPut(&SD1, port); + ap2_ble_swtich_ble_driver(); +} + +void annepro2_ble_disconnect(void) { + /* Skip if the driver is already enabled */ + if (host_get_driver() != &ap2_ble_driver) { + return; + } + + clear_keyboard(); +#ifdef NKRO_ENABLE + keymap_config.nkro = lastNkroStatus; +#endif + host_set_driver(lastHostDriver); +} + +void annepro2_ble_unpair(void) { + // sdPut(&SD1, 0x0); + sdWrite(&SD1, bleMcuUnpair, sizeof(bleMcuUnpair)); +} + +/* ------------------- Static Function Implementation ----------------------- */ +static void ap2_ble_swtich_ble_driver(void) { + if (host_get_driver() == &ap2_ble_driver) { + return; + } + clear_keyboard(); + lastHostDriver = host_get_driver(); +#ifdef NKRO_ENABLE + lastNkroStatus = keymap_config.nkro; +#endif + keymap_config.nkro = false; + host_set_driver(&ap2_ble_driver); +} + +static uint8_t ap2_ble_leds(void) { + return 0; // TODO: Figure out how to obtain LED status +} + +static void ap2_ble_mouse(report_mouse_t *report) {} + +static void ap2_ble_system(uint16_t data) {} + +static inline uint16_t CONSUMER2AP2(uint16_t usage) { + switch (usage) { + case AUDIO_VOL_DOWN: + return 0x04; + case AUDIO_VOL_UP: + return 0x02; + case AUDIO_MUTE: + return 0x01; + case TRANSPORT_PLAY_PAUSE: + return 0x08; + case TRANSPORT_NEXT_TRACK: + return 0x10; + case TRANSPORT_PREV_TRACK: + return 0x20; + default: + return 0x00; + } +} + +static void ap2_ble_consumer(uint16_t data) { + sdPut(&SD1, 0x0); + sdWrite(&SD1, bleMcuSendConsumerReport, sizeof(bleMcuSendConsumerReport)); + sdPut(&SD1, CONSUMER2AP2(data)); + static const uint8_t dummy[3] = {0}; + sdWrite(&SD1, dummy, sizeof(dummy)); +} + +/*! + * @brief Send keyboard HID report for Bluetooth driver + */ +static void ap2_ble_keyboard(report_keyboard_t *report) { + sdPut(&SD1, 0x0); + sdWrite(&SD1, bleMcuSendReport, sizeof(bleMcuSendReport)); + sdWrite(&SD1, &report->raw[0], KEYBOARD_REPORT_SIZE); +} diff --git a/keyboards/annepro2/annepro2_ble.h b/keyboards/annepro2/annepro2_ble.h new file mode 100644 index 0000000000..0cfb68e071 --- /dev/null +++ b/keyboards/annepro2/annepro2_ble.h @@ -0,0 +1,27 @@ +/* + Copyright (C) 2020 Yaotian Feng, Codetector<codetector@codetector.cn> + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#pragma once + +#include "annepro2.h" +#include "quantum.h" + +void annepro2_ble_bootload(void); +void annepro2_ble_startup(void); +void annepro2_ble_broadcast(uint8_t port); +void annepro2_ble_connect(uint8_t port); +void annepro2_ble_disconnect(void); +void annepro2_ble_unpair(void); diff --git a/keyboards/annepro2/ap2_led.c b/keyboards/annepro2/ap2_led.c new file mode 100644 index 0000000000..9969fcd02a --- /dev/null +++ b/keyboards/annepro2/ap2_led.c @@ -0,0 +1,134 @@ +/* Copyright 2021 OpenAnnePro community + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <string.h> +#include <stdio.h> +#include "hal.h" +#include "annepro2.h" +#include "ap2_led.h" +#include "protocol.h" + +annepro2Led_t ledMask[KEY_COUNT]; +annepro2LedStatus_t annepro2LedStatus; + +void ledCommandCallback(const message_t *msg) { + switch (msg->command) { + case CMD_LED_STATUS: + annepro2LedStatus.amountOfProfiles = msg->payload[0]; + annepro2LedStatus.currentProfile = msg->payload[1]; + annepro2LedStatus.matrixEnabled = msg->payload[2]; + annepro2LedStatus.isReactive = msg->payload[3]; + annepro2LedStatus.ledIntensity = msg->payload[4]; + annepro2LedStatus.errors = msg->payload[5]; + break; + +#ifdef CONSOLE_ENABLE + case CMD_LED_DEBUG: + /* TODO: Don't use printf. */ + printf("LED:"); + for (int i = 0; i < msg->payloadSize; i++) { + printf("%02x ", msg->payload[i]); + } + for (int i = 0; i < msg->payloadSize; i++) { + printf("%c", msg->payload[i]); + } + printf("\n"); + break; +#endif + } +} + +void annepro2SetIAP(void) { protoTx(CMD_LED_IAP, NULL, 0, 3); } + +void annepro2LedDisable(void) { protoTx(CMD_LED_OFF, NULL, 0, 3); } + +void annepro2LedEnable(void) { protoTx(CMD_LED_ON, NULL, 0, 3); } + +void annepro2LedSetProfile(uint8_t prof) { protoTx(CMD_LED_SET_PROFILE, &prof, sizeof(prof), 3); } + +void annepro2LedGetStatus() { protoTx(CMD_LED_GET_STATUS, NULL, 0, 3); } + +void annepro2LedNextProfile() { protoTx(CMD_LED_NEXT_PROFILE, NULL, 0, 3); } + +void annepro2LedNextIntensity() { protoTx(CMD_LED_NEXT_INTENSITY, NULL, 0, 3); } + +void annepro2LedNextAnimationSpeed() { protoTx(CMD_LED_NEXT_ANIMATION_SPEED, NULL, 0, 3); } + +void annepro2LedPrevProfile() { protoTx(CMD_LED_PREV_PROFILE, NULL, 0, 3); } + +void annepro2LedMaskSetKey(uint8_t row, uint8_t col, annepro2Led_t color) { + uint8_t payload[] = {row, col, color.p.blue, color.p.green, color.p.red, color.p.alpha}; + protoTx(CMD_LED_MASK_SET_KEY, payload, sizeof(payload), 1); +} + +/* Push a whole local row to the shine */ +void annepro2LedMaskSetRow(uint8_t row) { + uint8_t payload[NUM_COLUMN * sizeof(annepro2Led_t) + 1]; + payload[0] = row; + memcpy(payload + 1, &ledMask[ROWCOL2IDX(row, 0)], sizeof(*ledMask) * NUM_COLUMN); + protoTx(CMD_LED_MASK_SET_ROW, payload, sizeof(payload), 1); +} + +/* Synchronize all rows */ +void annepro2LedMaskSetAll(void) { + for (int row = 0; row < 5; row++) annepro2LedMaskSetRow(row); +} + +/* Set all keys to a given color */ +void annepro2LedMaskSetMono(const annepro2Led_t color) { protoTx(CMD_LED_MASK_SET_MONO, (uint8_t *)&color, sizeof(color), 1); } + +void annepro2LedBlink(uint8_t row, uint8_t col, annepro2Led_t color, uint8_t count, uint8_t hundredths) { + uint8_t payload[] = {row, col, color.p.blue, color.p.green, color.p.red, color.p.alpha, count, hundredths}; + protoTx(CMD_LED_KEY_BLINK, payload, sizeof(payload), 1); +} + +void annepro2LedSetForegroundColor(uint8_t red, uint8_t green, uint8_t blue) { + annepro2Led_t color = {.p.red = red, .p.green = green, .p.blue = blue, .p.alpha = 0xff}; + annepro2LedMaskSetMono(color); +} + +void annepro2LedResetForegroundColor() { + annepro2Led_t color = { + .p.red = 0, + .p.green = 0, + .p.blue = 0, + .p.alpha = 0, + }; + annepro2LedMaskSetMono(color); +} + +/* + * Currently keypresses are unified with other messages, still with single 1 + * byte payload. Transfer is normally fast enough for that to not be a problem - + * especially with asynchronous message reading. + * + * + * Previous description: + * If enabled, this data is sent to LED MCU on every keypress. + * In order to improve performance, both row and column values + * are packed into a single byte. + * Row range is [0, 4] and requires only 3 bits. + * Column range is [0, 13] and requires 4 bits. + * + * In order to differentiate this command from regular commands, + * the leftmost bit is set to 1 (0b10000000). + * Following it are 3 bits of row and 4 bits of col. + * 1 + 3 + 4 = 8 bits - only a single byte is sent for every keypress. + */ +void annepro2LedForwardKeypress(uint8_t row, uint8_t col) { + const uint8_t payload = row << 4 | col; + protoTx(CMD_LED_KEY_DOWN, &payload, 1, 1); +} diff --git a/keyboards/annepro2/ap2_led.h b/keyboards/annepro2/ap2_led.h new file mode 100644 index 0000000000..23712a2555 --- /dev/null +++ b/keyboards/annepro2/ap2_led.h @@ -0,0 +1,84 @@ + /* Copyright 2021 OpenAnnePro community + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "protocol.h" + +// Struct defining an LED and its RGB color components +// Compatible with Shine firmware. +typedef union { + struct { + /* Little endian ordering to match uint32_t */ + uint8_t blue, green, red; + /* Used in mask; nonzero means - use color from mask. */ + uint8_t alpha; + } p; /* parts */ + /* Parts vector access: 0 - blue, 1 - green, 2 - red */ + uint8_t pv[4]; + /* 0xrgb in mem is b g r a */ + uint32_t rgb; +} annepro2Led_t; + +#define ROWCOL2IDX(row, col) (NUM_COLUMN * (row) + (col)) +#define NUM_COLUMN 14 +#define NUM_ROW 5 +#define KEY_COUNT 70 + +/* Local copy of ledMask, used to override colors on the board */ +extern annepro2Led_t ledMask[KEY_COUNT]; + +/* Handle incoming messages */ +extern void ledCommandCallback(const message_t *msg); + +void annepro2SetIAP(void); +void annepro2LedDisable(void); +void annepro2LedEnable(void); +void annepro2LedSetProfile(uint8_t prof); +void annepro2LedGetStatus(void); +void annepro2LedNextProfile(void); +void annepro2LedPrevProfile(void); +void annepro2LedNextIntensity(void); +void annepro2LedNextAnimationSpeed(void); +void annepro2LedForwardKeypress(uint8_t row, uint8_t col); + +/* Set single key to a given color; alpha controls which is displayed */ +void annepro2LedMaskSetKey(uint8_t row, uint8_t col, annepro2Led_t color); +/* Push a whole local row to the shine */ +void annepro2LedMaskSetRow(uint8_t row); +/* Synchronize all rows */ +void annepro2LedMaskSetAll(void); + +/* Set all keys to a given color */ +void annepro2LedMaskSetMono(annepro2Led_t color); + +/* Blink given key `count` times by masking it with a `color`. Blink takes `hundredths` of a second */ +void annepro2LedBlink(uint8_t row, uint8_t col, annepro2Led_t color, uint8_t count, uint8_t hundredths); + +/* Kept for compatibility, but implemented using masks */ +void annepro2LedSetForegroundColor(uint8_t red, uint8_t green, uint8_t blue); +void annepro2LedResetForegroundColor(void); + +typedef struct { + uint8_t amountOfProfiles; + uint8_t currentProfile; + uint8_t matrixEnabled; + uint8_t isReactive; + uint8_t ledIntensity; + uint8_t errors; +} annepro2LedStatus_t; + +extern annepro2LedStatus_t annepro2LedStatus; diff --git a/keyboards/annepro2/boards/ANNEPRO2_C15/board.c b/keyboards/annepro2/boards/ANNEPRO2_C15/board.c new file mode 100644 index 0000000000..60c1826155 --- /dev/null +++ b/keyboards/annepro2/boards/ANNEPRO2_C15/board.c @@ -0,0 +1,103 @@ +/* + Copyright (C) 2020 Yaotian Feng, Codetector<codetector@codetector.cn> + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "hal.h" + +/* ============ Private Defines ===================== */ + +/* ============ Function Prototypes ================== */ + +#define PBIT(PORT, LINE) ((PAL_PORT(LINE) == PORT) ? (1 << PAL_PAD(LINE)) : 0) +#define PAFIO_L(PORT, LINE, AF) (((PAL_PORT(LINE) == PORT) && (PAL_PAD(LINE) < 8)) ? (AF << (PAL_PAD(LINE) << 2)) : 0) +#define PAFIO_H(PORT, LINE, AF) (((PAL_PORT(LINE) == PORT) && (PAL_PAD(LINE) >= 8)) ? (AF << ((PAL_PAD(LINE) - 8) << 2)) : 0) +#define PAFIO(PORT, N, LINE, AF) ((N) ? PAFIO_H(PORT, LINE, AF) : PAFIO_L(PORT, LINE, AF)) + +#define OUT_BITS(PORT) (PBIT(PORT, C2) | PBIT(PORT, C1) | PBIT(PORT, B5) | PBIT(PORT, B4) | PBIT(PORT, C3) | 0) + +#define IN_BITS(PORT) (PBIT(PORT, C4) | PBIT(PORT, C5) | PBIT(PORT, B10) | PBIT(PORT, B11) | PBIT(PORT, C0) | PBIT(PORT, A15) | PBIT(PORT, A8) | PBIT(PORT, A10) | PBIT(PORT, A11) | PBIT(PORT, A12) | PBIT(PORT, A13) | PBIT(PORT, A14) | PBIT(PORT, B2) | PBIT(PORT, B3) | 0) + +// Alternate Functions +#define AF_BITS(PORT, N) (PAFIO(PORT, N, LINE_UART_RX, AFIO_USART) | PAFIO(PORT, N, LINE_UART_TX, AFIO_USART) | PAFIO(PORT, N, LINE_BT_UART_TX, AFIO_USART) | PAFIO(PORT, N, LINE_BT_UART_RX, AFIO_USART) | PAFIO(PORT, N, C2, AFIO_GPIO) | PAFIO(PORT, N, C1, AFIO_GPIO) | PAFIO(PORT, N, B5, AFIO_GPIO) | PAFIO(PORT, N, B4, AFIO_GPIO) | PAFIO(PORT, N, C3, AFIO_GPIO) | PAFIO(PORT, N, C4, AFIO_GPIO) | PAFIO(PORT, N, C5, AFIO_GPIO) | PAFIO(PORT, N, B10, AFIO_GPIO) | PAFIO(PORT, N, B11, AFIO_GPIO) | PAFIO(PORT, N, C0, AFIO_GPIO) | PAFIO(PORT, N, A15, AFIO_GPIO) | PAFIO(PORT, N, A8, AFIO_GPIO) | PAFIO(PORT, N, A10, AFIO_GPIO) | PAFIO(PORT, N, A11, AFIO_GPIO) | PAFIO(PORT, N, A12, AFIO_GPIO) | PAFIO(PORT, N, A13, AFIO_GPIO) | PAFIO(PORT, N, A14, AFIO_GPIO) | PAFIO(PORT, N, B2, AFIO_GPIO) | PAFIO(PORT, N, B3, AFIO_GPIO) | 0) + +/** + * @brief PAL setup. + * @details Digital I/O ports static configuration as defined in @p board.h. + * This variable is used by the HAL when initializing the PAL driver. + */ +const PALConfig pal_default_config = { + // GPIO A + .setup[0] = + { + .DIR = OUT_BITS(IOPORTA), + .INE = IN_BITS(IOPORTA), + .PU = IN_BITS(IOPORTA), + .PD = 0x0000, + .OD = 0x0000, + .DRV = 0x0000, + .LOCK = 0x0000, + .OUT = 0x0000, + .CFG[0] = AF_BITS(IOPORTA, 0), + |