summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--docs/internals_gpio_control.md24
-rw-r--r--platforms/arm_atsam/gpio.h12
-rw-r--r--platforms/avr/gpio.h17
-rw-r--r--platforms/chibios/gpio.h24
4 files changed, 30 insertions, 47 deletions
diff --git a/docs/internals_gpio_control.md b/docs/internals_gpio_control.md
index ccd3f8c74d..e1f1515b71 100644
--- a/docs/internals_gpio_control.md
+++ b/docs/internals_gpio_control.md
@@ -6,17 +6,19 @@ QMK has a GPIO control abstraction layer which is microcontroller agnostic. This
The following functions provide basic control of GPIOs and are found in `platforms/<platform>/gpio.h`.
-|Function |Description | Old AVR Examples | Old ChibiOS/ARM Examples |
-|------------------------|--------------------------------------------------|-------------------------------------------------|-------------------------------------------------|
-| `setPinInput(pin)` | Set pin as input with high impedance (High-Z) | `DDRB &= ~(1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT)` |
-| `setPinInputHigh(pin)` | Set pin as input with builtin pull-up resistor | `DDRB &= ~(1<<2); PORTB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)` |
-| `setPinInputLow(pin)` | Set pin as input with builtin pull-down resistor | N/A (Not supported on AVR) | `palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)` |
-| `setPinOutput(pin)` | Set pin as output | `DDRB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)` |
-| `writePinHigh(pin)` | Set pin level as high, assuming it is an output | `PORTB \|= (1<<2)` | `palSetLine(pin)` |
-| `writePinLow(pin)` | Set pin level as low, assuming it is an output | `PORTB &= ~(1<<2)` | `palClearLine(pin)` |
-| `writePin(pin, level)` | Set pin level, assuming it is an output | `(level) ? PORTB \|= (1<<2) : PORTB &= ~(1<<2)` | `(level) ? palSetLine(pin) : palClearLine(pin)` |
-| `readPin(pin)` | Returns the level of the pin | `_SFR_IO8(pin >> 4) & _BV(pin & 0xF)` | `palReadLine(pin)` |
-| `togglePin(pin)` | Invert pin level, assuming it is an output | `PORTB ^= (1<<2)` | `palToggleLine(pin)` |
+| Function | Description | Old AVR Examples | Old ChibiOS/ARM Examples |
+|------------------------------|-----------------------------------------------------|-------------------------------------------------|--------------------------------------------------|
+| `setPinInput(pin)` | Set pin as input with high impedance (High-Z) | `DDRB &= ~(1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT)` |
+| `setPinInputHigh(pin)` | Set pin as input with builtin pull-up resistor | `DDRB &= ~(1<<2); PORTB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)` |
+| `setPinInputLow(pin)` | Set pin as input with builtin pull-down resistor | N/A (Not supported on AVR) | `palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)` |
+| `setPinOutput(pin)` | Set pin as output (alias of `setPinOutputPushPull`) | `DDRB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)` |
+| `setPinOutputPushPull(pin)` | Set pin as output, push/pull mode | `DDRB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)` |
+| `setPinOutputOpenDrain(pin)` | Set pin as output, open-drain mode | N/A (Not implemented on AVR) | `palSetLineMode(pin, PAL_MODE_OUTPUT_OPENDRAIN)` |
+| `writePinHigh(pin)` | Set pin level as high, assuming it is an output | `PORTB \|= (1<<2)` | `palSetLine(pin)` |
+| `writePinLow(pin)` | Set pin level as low, assuming it is an output | `PORTB &= ~(1<<2)` | `palClearLine(pin)` |
+| `writePin(pin, level)` | Set pin level, assuming it is an output | `(level) ? PORTB \|= (1<<2) : PORTB &= ~(1<<2)` | `(level) ? palSetLine(pin) : palClearLine(pin)` |
+| `readPin(pin)` | Returns the level of the pin | `_SFR_IO8(pin >> 4) & _BV(pin & 0xF)` | `palReadLine(pin)` |
+| `togglePin(pin)` | Invert pin level, assuming it is an output | `PORTB ^= (1<<2)` | `palToggleLine(pin)` |
## Advanced Settings :id=advanced-settings
diff --git a/platforms/arm_atsam/gpio.h b/platforms/arm_atsam/gpio.h
index 915ed0ef4f..a42aaff54d 100644
--- a/platforms/arm_atsam/gpio.h
+++ b/platforms/arm_atsam/gpio.h
@@ -22,9 +22,9 @@
typedef uint8_t pin_t;
-#define SAMD_PORT(pin) ((pin & 0x20) >> 5)
-#define SAMD_PIN(pin) (pin & 0x1f)
-#define SAMD_PIN_MASK(pin) (1 << (pin & 0x1f))
+#define SAMD_PORT(pin) (((pin)&0x20) >> 5)
+#define SAMD_PIN(pin) ((pin)&0x1f)
+#define SAMD_PIN_MASK(pin) (1 << ((pin)&0x1f))
#define setPinInput(pin) \
do { \
@@ -48,12 +48,16 @@ typedef uint8_t pin_t;
PORT->Group[SAMD_PORT(pin)].PINCFG[SAMD_PIN(pin)].bit.PULLEN = 1; \
} while (0)
-#define setPinOutput(pin) \
+#define setPinOutputPushPull(pin) \
do { \
PORT->Group[SAMD_PORT(pin)].DIRSET.reg = SAMD_PIN_MASK(pin); \
PORT->Group[SAMD_PORT(pin)].OUTCLR.reg = SAMD_PIN_MASK(pin); \
} while (0)
+#define setPinOutputOpenDrain(pin) _Static_assert(0, "arm_atsam platform does not implement an open-drain output")
+
+#define setPinOutput(pin) setPinOutputPushPull(pin)
+
#define writePinHigh(pin) \
do { \
PORT->Group[SAMD_PORT(pin)].OUTSET.reg = SAMD_PIN_MASK(pin); \
diff --git a/platforms/avr/gpio.h b/platforms/avr/gpio.h
index e9be68491d..95f15c28dc 100644
--- a/platforms/avr/gpio.h
+++ b/platforms/avr/gpio.h
@@ -25,7 +25,9 @@ typedef uint8_t pin_t;
#define setPinInput(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF))
#define setPinInputHigh(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
#define setPinInputLow(pin) _Static_assert(0, "AVR processors cannot implement an input as pull low")
-#define setPinOutput(pin) (DDRx_ADDRESS(pin) |= _BV((pin)&0xF))
+#define setPinOutputPushPull(pin) (DDRx_ADDRESS(pin) |= _BV((pin)&0xF))
+#define setPinOutputOpenDrain(pin) _Static_assert(0, "AVR platform does not implement an open-drain output")
+#define setPinOutput(pin) setPinOutputPushPull(pin)
#define writePinHigh(pin) (PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
#define writePinLow(pin) (PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF))
@@ -34,16 +36,3 @@ typedef uint8_t pin_t;
#define readPin(pin) ((bool)(PINx_ADDRESS(pin) & _BV((pin)&0xF)))
#define togglePin(pin) (PORTx_ADDRESS(pin) ^= _BV((pin)&0xF))
-
-/* Operation of GPIO by port. */
-
-typedef uint8_t port_data_t;
-
-#define readPort(port) PINx_ADDRESS(port)
-
-#define setPortBitInput(port, bit) (DDRx_ADDRESS(port) &= ~_BV((bit)&0xF), PORTx_ADDRESS(port) &= ~_BV((bit)&0xF))
-#define setPortBitInputHigh(port, bit) (DDRx_ADDRESS(port) &= ~_BV((bit)&0xF), PORTx_ADDRESS(port) |= _BV((bit)&0xF))
-#define setPortBitOutput(port, bit) (DDRx_ADDRESS(port) |= _BV((bit)&0xF))
-
-#define writePortBitLow(port, bit) (PORTx_ADDRESS(port) &= ~_BV((bit)&0xF))
-#define writePortBitHigh(port, bit) (PORTx_ADDRESS(port) |= _BV((bit)&0xF))
diff --git a/platforms/chibios/gpio.h b/platforms/chibios/gpio.h
index 4d057f1cab..eb44a18f9c 100644
--- a/platforms/chibios/gpio.h
+++ b/platforms/chibios/gpio.h
@@ -22,10 +22,12 @@ typedef ioline_t pin_t;
/* Operation of GPIO by pin. */
-#define setPinInput(pin) palSetLineMode(pin, PAL_MODE_INPUT)
-#define setPinInputHigh(pin) palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)
-#define setPinInputLow(pin) palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)
-#define setPinOutput(pin) palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)
+#define setPinInput(pin) palSetLineMode((pin), PAL_MODE_INPUT)
+#define setPinInputHigh(pin) palSetLineMode((pin), PAL_MODE_INPUT_PULLUP)
+#define setPinInputLow(pin) palSetLineMode((pin), PAL_MODE_INPUT_PULLDOWN)
+#define setPinOutputPushPull(pin) palSetLineMode((pin), PAL_MODE_OUTPUT_PUSHPULL)
+#define setPinOutputOpenDrain(pin) palSetLineMode((pin), PAL_MODE_OUTPUT_OPENDRAIN)
+#define setPinOutput(pin) setPinOutputPushPull(pin)
#define writePinHigh(pin) palSetLine(pin)
#define writePinLow(pin) palClearLine(pin)
@@ -34,17 +36,3 @@ typedef ioline_t pin_t;
#define readPin(pin) palReadLine(pin)
#define togglePin(pin) palToggleLine(pin)
-
-/* Operation of GPIO by port. */
-
-typedef uint16_t port_data_t;
-
-#define readPort(pin) palReadPort(PAL_PORT(pin))
-
-#define setPortBitInput(pin, bit) palSetPadMode(PAL_PORT(pin), bit, PAL_MODE_INPUT)
-#define setPortBitInputHigh(pin, bit) palSetPadMode(PAL_PORT(pin), bit, PAL_MODE_INPUT_PULLUP)
-#define setPortBitInputLow(pin, bit) palSetPadMode(PAL_PORT(pin), bit, PAL_MODE_INPUT_PULLDOWN)
-#define setPortBitOutput(pin, bit) palSetPadMode(PAL_PORT(pin), bit, PAL_MODE_OUTPUT_PUSHPULL)
-
-#define writePortBitLow(pin, bit) palClearLine(PAL_LINE(PAL_PORT(pin), bit))
-#define writePortBitHigh(pin, bit) palSetLine(PAL_LINE(PAL_PORT(pin), bit))
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 13:32:18 +0000