summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rwxr-xr-xdrivers/avr/i2c_master.c42
-rw-r--r--drivers/avr/is31fl3731.c7
-rw-r--r--keyboards/ergodox_ez/ergodox_ez.c4
-rw-r--r--keyboards/ergodox_ez/ergodox_ez.h2
-rw-r--r--keyboards/ergodox_ez/matrix.c3
-rw-r--r--keyboards/ergodox_ez/rules.mk4
6 files changed, 33 insertions, 29 deletions
diff --git a/drivers/avr/i2c_master.c b/drivers/avr/i2c_master.c
index f4a4bb7b0b..bcf92153c5 100755
--- a/drivers/avr/i2c_master.c
+++ b/drivers/avr/i2c_master.c
@@ -13,32 +13,34 @@
void i2c_init(void)
{
+ TWSR = 0; /* no prescaler */
TWBR = (uint8_t)TWBR_val;
+ //TWBR = 10;
}
uint8_t i2c_start(uint8_t address)
{
// reset TWI control register
- TWCR = 0;
- // transmit START condition
+ //TWCR = 0;
+ // transmit START condition
TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
// wait for end of transmission
while( !(TWCR & (1<<TWINT)) );
-
+
// check if the start condition was successfully transmitted
- if((TWSR & 0xF8) != TW_START){ return 1; }
-
+ if(((TW_STATUS & 0xF8) != TW_START) && ((TW_STATUS & 0xF8) != TW_REP_START)){ return 1; }
+
// load slave address into data register
TWDR = address;
// start transmission of address
TWCR = (1<<TWINT) | (1<<TWEN);
// wait for end of transmission
while( !(TWCR & (1<<TWINT)) );
-
+
// check if the device has acknowledged the READ / WRITE mode
uint8_t twst = TW_STATUS & 0xF8;
if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return 1;
-
+
return 0;
}
@@ -50,17 +52,17 @@ uint8_t i2c_write(uint8_t data)
TWCR = (1<<TWINT) | (1<<TWEN);
// wait for end of transmission
while( !(TWCR & (1<<TWINT)) );
-
- if( (TWSR & 0xF8) != TW_MT_DATA_ACK ){ return 1; }
-
+
+ if( (TW_STATUS & 0xF8) != TW_MT_DATA_ACK ){ return 1; }
+
return 0;
}
uint8_t i2c_read_ack(void)
{
-
+
// start TWI module and acknowledge data after reception
- TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWEA);
+ TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWEA);
// wait for end of transmission
while( !(TWCR & (1<<TWINT)) );
// return received data from TWDR
@@ -69,7 +71,7 @@ uint8_t i2c_read_ack(void)
uint8_t i2c_read_nack(void)
{
-
+
// start receiving without acknowledging reception
TWCR = (1<<TWINT) | (1<<TWEN);
// wait for end of transmission
@@ -81,29 +83,29 @@ uint8_t i2c_read_nack(void)
uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length)
{
if (i2c_start(address | I2C_WRITE)) return 1;
-
+
for (uint16_t i = 0; i < length; i++)
{
if (i2c_write(data[i])) return 1;
}
-
+
i2c_stop();
-
+
return 0;
}
uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length)
{
if (i2c_start(address | I2C_READ)) return 1;
-
+
for (uint16_t i = 0; i < (length-1); i++)
{
data[i] = i2c_read_ack();
}
data[(length-1)] = i2c_read_nack();
-
+
i2c_stop();
-
+
return 0;
}
@@ -146,4 +148,6 @@ void i2c_stop(void)
{
// transmit STOP condition
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+ // wait until stop condition is executed and bus released
+ while(TWCR & (1<<TWSTO));
}
diff --git a/drivers/avr/is31fl3731.c b/drivers/avr/is31fl3731.c
index c7a99e3a3d..13dfe6eaf6 100644
--- a/drivers/avr/is31fl3731.c
+++ b/drivers/avr/is31fl3731.c
@@ -84,7 +84,8 @@ void IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data )
g_twi_transfer_buffer[1] = data;
//Transmit data until succesful
- while(i2c_transmit(addr << 1, g_twi_transfer_buffer,2) != 0);
+ //while(i2c_transmit(addr << 1, g_twi_transfer_buffer,2) != 0);
+ i2c_transmit(addr << 1, g_twi_transfer_buffer,2);
}
void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
@@ -108,7 +109,9 @@ void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
}
//Transmit buffer until succesful
- while(i2c_transmit(addr << 1, g_twi_transfer_buffer,17) != 0);
+ //while(i2c_transmit(addr << 1, g_twi_transfer_buffer,17) != 0);
+ i2c_transmit(addr << 1, g_twi_transfer_buffer,17);
+
}
}
diff --git a/keyboards/ergodox_ez/ergodox_ez.c b/keyboards/ergodox_ez/ergodox_ez.c
index 21854ef77e..36eb58a3c7 100644
--- a/keyboards/ergodox_ez/ergodox_ez.c
+++ b/keyboards/ergodox_ez/ergodox_ez.c
@@ -1,6 +1,4 @@
#include QMK_KEYBOARD_H
-#include "i2cmaster.h"
-
extern inline void ergodox_board_led_on(void);
extern inline void ergodox_right_led_1_on(void);
@@ -329,7 +327,7 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
{{3|(9<<4)}, {24.9*0, 16*2}, 0}, // LED 20
{{4|(6<<4)}, {24.9*3, 16*2}, 0}, // LED 21
- {{4|(7<<4)}, {24.9*3, 16*2}, 0}, // LED 22
+ {{4|(7<<4)}, {24.9*2, 16*2}, 0}, // LED 22
{{4|(8<<4)}, {24.9*1, 16*2}, 0}, // LED 23
{{4|(9<<4)}, {24.9*0, 16*2}, 0}, // LED 24
};
diff --git a/keyboards/ergodox_ez/ergodox_ez.h b/keyboards/ergodox_ez/ergodox_ez.h
index eda6d767cf..3ffc32553c 100644
--- a/keyboards/ergodox_ez/ergodox_ez.h
+++ b/keyboards/ergodox_ez/ergodox_ez.h
@@ -4,7 +4,7 @@
#include "quantum.h"
#include <stdint.h>
#include <stdbool.h>
-#include "i2cmaster.h"
+#include "i2c_master.h"
#include <util/delay.h>
#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
diff --git a/keyboards/ergodox_ez/matrix.c b/keyboards/ergodox_ez/matrix.c
index e101711334..2aad997817 100644
--- a/keyboards/ergodox_ez/matrix.c
+++ b/keyboards/ergodox_ez/matrix.c
@@ -34,7 +34,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "util.h"
#include "matrix.h"
#include QMK_KEYBOARD_H
-#include "i2cmaster.h"
#ifdef DEBUG_MATRIX_SCAN_RATE
#include "timer.h"
#endif
@@ -297,7 +296,7 @@ static matrix_row_t read_cols(uint8_t row)
mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out;
mcp23018_status = i2c_write(GPIOB); if (mcp23018_status) goto out;
mcp23018_status = i2c_start(I2C_ADDR_READ); if (mcp23018_status) goto out;
- data = i2c_readNak();
+ data = i2c_read_nack();
data = ~data;
out:
i2c_stop();
diff --git a/keyboards/ergodox_ez/rules.mk b/keyboards/ergodox_ez/rules.mk
index a3b2ba5cab..0e0b3cdefd 100644
--- a/keyboards/ergodox_ez/rules.mk
+++ b/keyboards/ergodox_ez/rules.mk
@@ -15,8 +15,8 @@
#----------------------------------------------------------------------------
# # project specific files
-SRC = twimaster.c \
- matrix.c
+SRC = matrix.c \
+ i2c_master.c
# MCU name
MCU = atmega32u4