diff options
| -rw-r--r-- | docs/feature_rgblight.md | 68 | ||||
| -rw-r--r-- | quantum/rgblight.c | 36 | ||||
| -rw-r--r-- | quantum/rgblight.h | 6 |
3 files changed, 79 insertions, 31 deletions
diff --git a/docs/feature_rgblight.md b/docs/feature_rgblight.md index 52d5c5fe8a..23b6f1c941 100644 --- a/docs/feature_rgblight.md +++ b/docs/feature_rgblight.md @@ -148,37 +148,43 @@ const uint16_t RGBLED_GRADIENT_RANGES[] PROGMEM = {360, 240, 180, 120, 90}; If you need to change your RGB lighting in code, for example in a macro to change the color whenever you switch layers, QMK provides a set of functions to assist you. See [`rgblight.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight.h) for the full list, but the most commonly used functions include: -|Function |Description | -|-----------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------| -|`rgblight_enable()` |Turn LEDs on, based on their previous state | -|`rgblight_enable_noeeprom()` |Turn LEDs on, based on their previous state (not written to EEPROM) | -|`rgblight_disable()` |Turn LEDs off | -|`rgblight_disable_noeeprom()` |Turn LEDs off (not written to EEPROM) | -|`rgblight_mode(x)` |Set the mode, if RGB animations are enabled | -|`rgblight_mode_noeeprom(x)` |Set the mode, if RGB animations are enabled (not written to EEPROM) | -|`rgblight_setrgb(r, g, b)` |Set all LEDs to the given RGB value where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) | -|`rgblight_setrgb_at(r, g, b, led)` |Set a single LED to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM) | -|`rgblight_sethsv(h, s, v)` |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255 | -|`rgblight_sethsv_noeeprom(h, s, v)`|Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255 (not written to EEPROM) | -|`rgblight_sethsv_at(h, s, v, led)` |Set a single LED to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)| -|`rgblight_toggle()` |Toggle all LEDs between on and off | -|`rgblight_toggle_noeeprom()` |Toggle all LEDs between on and off (not written to EEPROM) | -|`rgblight_step()` |Change the mode to the next RGB animation in the list of enabled RGB animations | -|`rgblight_step_noeeprom()` |Change the mode to the next RGB animation in the list of enabled RGB animations (not written to EEPROM) | -|`rgblight_step_reverse()` |Change the mode to the previous RGB animation in the list of enabled RGB animations | -|`rgblight_step_reverse_noeeprom()` |Change the mode to the previous RGB animation in the list of enabled RGB animations (not written to EEPROM) | -|`rgblight_increase_hue()` |Increase the hue for all LEDs. This wraps around at maximum hue | -|`rgblight_increase_hue_noeeprom()` |Increase the hue for all LEDs. This wraps around at maximum hue (not written to EEPROM) | -|`rgblight_decrease_hue()` |Decrease the hue for all LEDs. This wraps around at minimum hue | -|`rgblight_decrease_hue_noeeprom()` |Decrease the hue for all LEDs. This wraps around at minimum hue (not written to EEPROM) | -|`rgblight_increase_sat()` |Increase the saturation for all LEDs. This wraps around at maximum saturation | -|`rgblight_increase_sat_noeeprom()` |Increase the saturation for all LEDs. This wraps around at maximum saturation (not written to EEPROM) | -|`rgblight_decrease_sat()` |Decrease the saturation for all LEDs. This wraps around at minimum saturation | -|`rgblight_decrease_sat_noeeprom()` |Decrease the saturation for all LEDs. This wraps around at minimum saturation (not written to EEPROM) | -|`rgblight_increase_val()` |Increase the value for all LEDs. This wraps around at maximum value | -|`rgblight_increase_val_noeeprom()` |Increase the value for all LEDs. This wraps around at maximum value (not written to EEPROM) | -|`rgblight_decrease_val()` |Decrease the value for all LEDs. This wraps around at minimum value | -|`rgblight_decrease_val_noeeprom()` |Decrease the value for all LEDs. This wraps around at minimum value (not written to EEPROM) | +|Function |Description | +|--------------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------| +|`rgblight_enable()` |Turn LEDs on, based on their previous state | +|`rgblight_enable_noeeprom()` |Turn LEDs on, based on their previous state (not written to EEPROM) | +|`rgblight_disable()` |Turn LEDs off | +|`rgblight_disable_noeeprom()` |Turn LEDs off (not written to EEPROM) | +|`rgblight_mode(x)` |Set the mode, if RGB animations are enabled | +|`rgblight_mode_noeeprom(x)` |Set the mode, if RGB animations are enabled (not written to EEPROM) | +|`rgblight_setrgb(r, g, b)` |Set all LEDs to the given RGB value where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) | +|`rgblight_setrgb_at(r, g, b, led)` |Set a single LED to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM) | +|`rgblight_setrgb_range(r, g, b, start, end)`|Set a continuous range of LEDs to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `start`(included) and `stop`(excluded) are between 0 and `RGBLED_NUM` (not written to EEPROM)| +|`rgblight_setrgb_master(r, g, b)` |Set the LEDs on the master side to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) | +|`rgblight_setrgb_slave(r, g, b)` |Set the LEDs on the slave side to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) | +|`rgblight_sethsv(h, s, v)` |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255 | +|`rgblight_sethsv_noeeprom(h, s, v)` |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255 (not written to EEPROM) | +|`rgblight_sethsv_at(h, s, v, led)` |Set a single LED to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)| +|`rgblight_sethsv_range(h, s, v, start, end)`|Set a continuous range of LEDs to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `start`(included) and `stop`(excluded) are between 0 and `RGBLED_NUM` (not written to EEPROM)| +|`rgblight_sethsv_master(h, s, v)` |Set the LEDs on the master side to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255 (not written to EEPROM) | +|`rgblight_sethsv_slave(h, s, v)` |Set the LEDs on the slave side to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255 (not written to EEPROM) | +|`rgblight_toggle()` |Toggle all LEDs between on and off | +|`rgblight_toggle_noeeprom()` |Toggle all LEDs between on and off (not written to EEPROM) | +|`rgblight_step()` |Change the mode to the next RGB animation in the list of enabled RGB animations | +|`rgblight_step_noeeprom()` |Change the mode to the next RGB animation in the list of enabled RGB animations (not written to EEPROM) | +|`rgblight_step_reverse()` |Change the mode to the previous RGB animation in the list of enabled RGB animations | +|`rgblight_step_reverse_noeeprom()` |Change the mode to the previous RGB animation in the list of enabled RGB animations (not written to EEPROM) | +|`rgblight_increase_hue()` |Increase the hue for all LEDs. This wraps around at maximum hue | +|`rgblight_increase_hue_noeeprom()` |Increase the hue for all LEDs. This wraps around at maximum hue (not written to EEPROM) | +|`rgblight_decrease_hue()` |Decrease the hue for all LEDs. This wraps around at minimum hue | +|`rgblight_decrease_hue_noeeprom()` |Decrease the hue for all LEDs. This wraps around at minimum hue (not written to EEPROM) | +|`rgblight_increase_sat()` |Increase the saturation for all LEDs. This wraps around at maximum saturation | +|`rgblight_increase_sat_noeeprom()` |Increase the saturation for all LEDs. This wraps around at maximum saturation (not written to EEPROM) | +|`rgblight_decrease_sat()` |Decrease the saturation for all LEDs. This wraps around at minimum saturation | +|`rgblight_decrease_sat_noeeprom()` |Decrease the saturation for all LEDs. This wraps around at minimum saturation (not written to EEPROM) | +|`rgblight_increase_val()` |Increase the value for all LEDs. This wraps around at maximum value | +|`rgblight_increase_val_noeeprom()` |Increase the value for all LEDs. This wraps around at maximum value (not written to EEPROM) | +|`rgblight_decrease_val()` |Decrease the value for all LEDs. This wraps around at minimum value | +|`rgblight_decrease_val_noeeprom()` |Decrease the value for all LEDs. This wraps around at minimum value (not written to EEPROM) | Additionally, [`rgblight_list.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight_list.h) defines several predefined shortcuts for various colors. Feel free to add to this list! diff --git a/quantum/rgblight.c b/quantum/rgblight.c index 30f7d75286..d42a1d2e59 100644 --- a/quantum/rgblight.c +++ b/quantum/rgblight.c @@ -611,6 +611,42 @@ void rgblight_sethsv_at(uint16_t hue, uint8_t sat, uint8_t val, uint8_t index) { rgblight_setrgb_at(tmp_led.r, tmp_led.g, tmp_led.b, index); } +void rgblight_setrgb_range(uint8_t r, uint8_t g, uint8_t b, uint8_t start, uint8_t end) { + if (!rgblight_config.enable || start < 0 || start >= end || end > RGBLED_NUM) { return; } + + for (uint8_t i = start; i < end; i++) { + led[i].r = r; + led[i].g = g; + led[i].b = b; + } + rgblight_set(); + wait_ms(1); +} + +void rgblight_sethsv_range(uint16_t hue, uint8_t sat, uint8_t val, uint8_t start, uint8_t end) { + if (!rgblight_config.enable) { return; } + + LED_TYPE tmp_led; + sethsv(hue, sat, val, &tmp_led); + rgblight_setrgb_range(tmp_led.r, tmp_led.g, tmp_led.b, start, end); +} + +void rgblight_setrgb_master(uint8_t r, uint8_t g, uint8_t b) { + rgblight_setrgb_range(r, g, b, 0 , (uint8_t) RGBLED_NUM/2); +} + +void rgblight_setrgb_slave(uint8_t r, uint8_t g, uint8_t b) { + rgblight_setrgb_range(r, g, b, (uint8_t) RGBLED_NUM/2, (uint8_t) RGBLED_NUM); +} + +void rgblight_sethsv_master(uint16_t hue, uint8_t sat, uint8_t val) { + rgblight_sethsv_range(hue, sat, val, 0, (uint8_t) RGBLED_NUM/2); +} + +void rgblight_sethsv_slave(uint16_t hue, uint8_t sat, uint8_t val) { + rgblight_sethsv_range(hue, sat, val, (uint8_t) RGBLED_NUM/2, (uint8_t) RGBLED_NUM); +} + #ifndef RGBLIGHT_CUSTOM_DRIVER void rgblight_set(void) { if (rgblight_config.enable) { diff --git a/quantum/rgblight.h b/quantum/rgblight.h index 03534bd311..aa608d4240 100644 --- a/quantum/rgblight.h +++ b/quantum/rgblight.h @@ -187,6 +187,12 @@ uint8_t rgblight_get_val(void); void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b); void rgblight_setrgb_at(uint8_t r, uint8_t g, uint8_t b, uint8_t index); void rgblight_sethsv_at(uint16_t hue, uint8_t sat, uint8_t val, uint8_t index); +void rgblight_setrgb_range(uint8_t r, uint8_t g, uint8_t b, uint8_t start, uint8_t end); +void rgblight_sethsv_range(uint16_t hue, uint8_t sat, uint8_t val, uint8_t start, uint8_t end); +void rgblight_setrgb_master(uint8_t r, uint8_t g, uint8_t b); +void rgblight_setrgb_slave(uint8_t r, uint8_t g, uint8_t b); +void rgblight_sethsv_master(uint16_t hue, uint8_t sat, uint8_t val); +void rgblight_sethsv_slave(uint16_t hue, uint8_t sat, uint8_t val); uint32_t eeconfig_read_rgblight(void); void eeconfig_update_rgblight(uint32_t val); |